Esempio n. 1
0
int DirectVolume::handleBlockEvent(NetlinkEvent *evt) {
    const char *dp = evt->findParam("DEVPATH");

    PathCollection::iterator  it;
    for (it = mPaths->begin(); it != mPaths->end(); ++it) {
        if (!strncmp(dp, *it, strlen(*it))) {
            /* We can handle this disk */
            int action = evt->getAction();
            const char *devtype = evt->findParam("DEVTYPE");

            if (action == NetlinkEvent::NlActionAdd) {
                int major = atoi(evt->findParam("MAJOR"));
                int minor = atoi(evt->findParam("MINOR"));
                char nodepath[255];

                snprintf(nodepath,
                         sizeof(nodepath), "/dev/block/vold/%d:%d",
                         major, minor);
                if (createDeviceNode(nodepath, major, minor)) {
                    SLOGE("Error making device node '%s' (%s)", nodepath,
                                                               strerror(errno));
                }
                if (!strcmp(devtype, "disk")) {
                    handleDiskAdded(dp, evt);
                } else {
                    handlePartitionAdded(dp, evt);
                }
                /* Send notification iff disk is ready (ie all partitions found) */
                if (getState() == Volume::State_Idle) {
                    char msg[255];

                    snprintf(msg, sizeof(msg),
                             "Volume %s %s disk inserted (%d:%d)", getLabel(),
                             getFuseMountpoint(), mDiskMajor, mDiskMinor);
                    mVm->getBroadcaster()->sendBroadcast(ResponseCode::VolumeDiskInserted,
                                                         msg, false);
                }
            } else if (action == NetlinkEvent::NlActionRemove) {
                if (!strcmp(devtype, "disk")) {
                    handleDiskRemoved(dp, evt);
                } else {
                    handlePartitionRemoved(dp, evt);
                }
            } else if (action == NetlinkEvent::NlActionChange) {
                if (!strcmp(devtype, "disk")) {
                    handleDiskChanged(dp, evt);
                } else {
                    handlePartitionChanged(dp, evt);
                }
            } else {
                    SLOGW("Ignoring non add/remove/change event");
            }

            return 0;
        }
    }
    errno = ENODEV;
    return -1;
}
int DirectVolume::handleBlockEvent(NetlinkEvent *evt) {
    const char *dp = evt->findParam("DEVPATH");

    evt->dump();

    PathCollection::iterator  it;
    for (it = mPaths->begin(); it != mPaths->end(); ++it) {
        if (!strncmp(dp, *it, strlen(*it))) {
            /* We can handle this disk */
            int action = evt->getAction();
            const char *devtype = evt->findParam("DEVTYPE");

            if (action == NetlinkEvent::NlActionAdd) {
                int major = atoi(evt->findParam("MAJOR"));
                int minor = atoi(evt->findParam("MINOR"));
                char nodepath[255];

                snprintf(nodepath,
                         sizeof(nodepath), "/dev/block/vold/%d:%d",
                         major, minor);
                if (createDeviceNode(nodepath, major, minor)) {
                    SLOGE("Error making device node '%s' (%s)", nodepath,
                          strerror(errno));
                }
                if (!strcmp(devtype, "disk")) {
                    handleDiskAdded(dp, evt);
                } else {
                    handlePartitionAdded(dp, evt);
                }
            } else if (action == NetlinkEvent::NlActionRemove) {
                if (!strcmp(devtype, "disk")) {
                    handleDiskRemoved(dp, evt);
                } else {
                    handlePartitionRemoved(dp, evt);
                }
            } else if (action == NetlinkEvent::NlActionChange) {
                if (!strcmp(devtype, "disk")) {
                    handleDiskChanged(dp, evt);
                } else {
                    handlePartitionChanged(dp, evt);
                }
            } else {
                SLOGW("Ignoring non add/remove/change event");
            }

            return 0;
        }
    }
    errno = ENODEV;
    return -1;
}
Esempio n. 3
0
int Volume::mountVol() {
    dev_t deviceNodes[4];
    int n, i, rc = 0;
    char errmsg[255];
    const char* externalStorage = getenv("EXTERNAL_STORAGE");
    bool primaryStorage = externalStorage && !strcmp(getMountpoint(), externalStorage);
    char decrypt_state[PROPERTY_VALUE_MAX];
    char crypto_state[PROPERTY_VALUE_MAX];
    char encrypt_progress[PROPERTY_VALUE_MAX];
    int flags;

    property_get("vold.decrypt", decrypt_state, "");
    property_get("vold.encrypt_progress", encrypt_progress, "");

    /* Don't try to mount the volumes if we have not yet entered the disk password
     * or are in the process of encrypting.
     */
    if ((getState() == Volume::State_NoMedia) ||
        ((!strcmp(decrypt_state, "1") || encrypt_progress[0]) && primaryStorage)) {
        snprintf(errmsg, sizeof(errmsg),
                 "Volume %s %s mount failed - no media",
                 getLabel(), getMountpoint());
        mVm->getBroadcaster()->sendBroadcast(
                                         ResponseCode::VolumeMountFailedNoMedia,
                                         errmsg, false);
        errno = ENODEV;
        return -1;
    } else if (getState() != Volume::State_Idle) {
        errno = EBUSY;
        if (getState() == Volume::State_Pending) {
            mRetryMount = true;
        }
        return -1;
    }

    if (isMountpointMounted(getMountpoint())) {
        SLOGW("Volume is idle but appears to be mounted - fixing");
        setState(Volume::State_Mounted);
        // mCurrentlyMountedKdev = XXX
        return 0;
    }

    n = getDeviceNodes((dev_t *) &deviceNodes, 4);
    if (!n) {
        SLOGE("Failed to get device nodes (%s)\n", strerror(errno));
        return -1;
    }

    /* If we're running encrypted, and the volume is marked as encryptable and nonremovable,
     * and vold is asking to mount the primaryStorage device, then we need to decrypt
     * that partition, and update the volume object to point to it's new decrypted
     * block device
     */
    property_get("ro.crypto.state", crypto_state, "");
    flags = getFlags();
    if (primaryStorage &&
        ((flags & (VOL_NONREMOVABLE | VOL_ENCRYPTABLE))==(VOL_NONREMOVABLE | VOL_ENCRYPTABLE)) &&
        !strcmp(crypto_state, "encrypted") && !isDecrypted()) {
       char new_sys_path[MAXPATHLEN];
       char nodepath[256];
       int new_major, new_minor;

       if (n != 1) {
           /* We only expect one device node returned when mounting encryptable volumes */
           SLOGE("Too many device nodes returned when mounting %d\n", getMountpoint());
           return -1;
       }

       if (cryptfs_setup_volume(getLabel(), MAJOR(deviceNodes[0]), MINOR(deviceNodes[0]),
                                new_sys_path, sizeof(new_sys_path),
                                &new_major, &new_minor)) {
           SLOGE("Cannot setup encryption mapping for %d\n", getMountpoint());
           return -1;
       }
       /* We now have the new sysfs path for the decrypted block device, and the
        * majore and minor numbers for it.  So, create the device, update the
        * path to the new sysfs path, and continue.
        */
        snprintf(nodepath,
                 sizeof(nodepath), "/dev/block/vold/%d:%d",
                 new_major, new_minor);
        if (createDeviceNode(nodepath, new_major, new_minor)) {
            SLOGE("Error making device node '%s' (%s)", nodepath,
                                                       strerror(errno));
        }

        // Todo: Either create sys filename from nodepath, or pass in bogus path so
        //       vold ignores state changes on this internal device.
        updateDeviceInfo(nodepath, new_major, new_minor);

        /* Get the device nodes again, because they just changed */
        n = getDeviceNodes((dev_t *) &deviceNodes, 4);
        if (!n) {
            SLOGE("Failed to get device nodes (%s)\n", strerror(errno));
            return -1;
        }
    }

    for (i = 0; i < n; i++) {
        char devicePath[255];

        sprintf(devicePath, "/dev/block/vold/%d:%d", MAJOR(deviceNodes[i]),
                MINOR(deviceNodes[i]));

        SLOGI("%s being considered for volume %s\n", devicePath, getLabel());

        errno = 0;
        setState(Volume::State_Checking);

        if (Fat::check(devicePath)) {
            if (errno == ENODATA) {
                SLOGW("%s does not contain a FAT filesystem\n", devicePath);
                continue;
            }
            errno = EIO;
            /* Badness - abort the mount */
            SLOGE("%s failed FS checks (%s)", devicePath, strerror(errno));
            setState(Volume::State_Idle);
            return -1;
        }

        /*
         * Mount the device on our internal staging mountpoint so we can
         * muck with it before exposing it to non priviledged users.
         */
        errno = 0;
        int gid;

        if (primaryStorage) {
            // Special case the primary SD card.
            // For this we grant write access to the SDCARD_RW group.
            gid = AID_SDCARD_RW;
        } else {
            // For secondary external storage we keep things locked up.
            gid = AID_MEDIA_RW;
        }
        if (Fat::doMount(devicePath, "/mnt/secure/staging", false, false, false,
                AID_SYSTEM, gid, 0702, true)) {
            SLOGE("%s failed to mount via VFAT (%s)\n", devicePath, strerror(errno));
            continue;
        }

        SLOGI("Device %s, target %s mounted @ /mnt/secure/staging", devicePath, getMountpoint());

        protectFromAutorunStupidity();

        // only create android_secure on primary storage
        if (primaryStorage && createBindMounts()) {
            SLOGE("Failed to create bindmounts (%s)", strerror(errno));
            umount("/mnt/secure/staging");
            setState(Volume::State_Idle);
            return -1;
        }

        /*
         * Now that the bindmount trickery is done, atomically move the
         * whole subtree to expose it to non priviledged users.
         */
        if (doMoveMount("/mnt/secure/staging", getMountpoint(), false)) {
            SLOGE("Failed to move mount (%s)", strerror(errno));
            umount("/mnt/secure/staging");
            setState(Volume::State_Idle);
            return -1;
        }
        setState(Volume::State_Mounted);
        mCurrentlyMountedKdev = deviceNodes[i];
        return 0;
    }

    SLOGE("Volume %s found no suitable devices for mounting :(\n", getLabel());
    setState(Volume::State_Idle);

    return -1;
}
Esempio n. 4
0
int Volume::mountVol() {
    dev_t deviceNodes[MAX_SUP_PART];
    // dev_t deviceNodes[4];
    int n, i, curState, rc = 0;
    char errmsg[255];
    const char* externalStorage = getenv("EXTERNAL_STORAGE");
    bool primaryStorage = externalStorage && !strcmp(getMountpoint(), externalStorage);
    char decrypt_state[PROPERTY_VALUE_MAX];
    char crypto_state[PROPERTY_VALUE_MAX];
    char encrypt_progress[PROPERTY_VALUE_MAX];
    int flags;

    property_get("vold.decrypt", decrypt_state, "");
    property_get("vold.encrypt_progress", encrypt_progress, "");

    /* Don't try to mount the volumes if we have not yet entered the disk password
     * or are in the process of encrypting.
     */
    if ((getState() == Volume::State_NoMedia) ||
        ((!strcmp(decrypt_state, "1") || encrypt_progress[0]) && primaryStorage)) {
        snprintf(errmsg, sizeof(errmsg),
                 "Volume %s %s mount failed - no media",
                 getLabel(), getMountpoint());
        mVm->getBroadcaster()->sendBroadcast(
                                         ResponseCode::VolumeMountFailedNoMedia,
                                         errmsg, false);
        errno = ENODEV;
        return -1;
    } else if (getState() != Volume::State_Idle) {
        errno = EBUSY;
        if (getState() == Volume::State_Pending) {
            mRetryMount = true;
        }
        return -1;
    }

    if (isMountpointMounted(getMountpoint())) {
        SLOGW("Volume is idle but appears to be mounted - fixing");
        setState(Volume::State_Mounted);
        // mCurrentlyMountedKdev = XXX
        return 0;
    }

    #ifdef MTK_SHARED_SDCARD
	  if (IsEmmcStorage()) {
		  setState(Volume::State_Mounted);
		  return 0;
	  }    
    #endif

    // n = getDeviceNodes((dev_t *) &deviceNodes, 4);
    n = getDeviceNodes((dev_t *) &deviceNodes, MAX_SUP_PART);
    if (!n) {
        SLOGE("Failed to get device nodes (%s)\n", strerror(errno));
        return -1;
    }
    SLOGD("Found %d device nodes", n);

#ifdef MTK_SD_REINIT_SUPPORT
    if (!IsEmmcStorage()) {
       SLOGD("Reinit SD card");
	   if (mVm->reinitExternalSD()){
		   SLOGD("Fail: reinitExternalSD()");
       }
    }
#endif
    /* If we're running encrypted, and the volume is marked as encryptable and nonremovable,
     * and vold is asking to mount the primaryStorage device, then we need to decrypt
     * that partition, and update the volume object to point to it's new decrypted
     * block device
     */
    property_get("ro.crypto.state", crypto_state, "");
    flags = getFlags();
    if (primaryStorage &&
        ((flags & (VOL_NONREMOVABLE | VOL_ENCRYPTABLE))==(VOL_NONREMOVABLE | VOL_ENCRYPTABLE)) &&
        !strcmp(crypto_state, "encrypted") && !isDecrypted()) {
       char new_sys_path[MAXPATHLEN];
       char nodepath[256];
       int new_major, new_minor;

       if (n != 1) {
           /* We only expect one device node returned when mounting encryptable volumes */
           SLOGE("Too many device nodes returned when mounting %d\n", getMountpoint());
           return -1;
       }

       if (cryptfs_setup_volume(getLabel(), MAJOR(deviceNodes[0]), MINOR(deviceNodes[0]),
                                new_sys_path, sizeof(new_sys_path),
                                &new_major, &new_minor)) {
           SLOGE("Cannot setup encryption mapping for %d\n", getMountpoint());
           return -1;
       }
       /* We now have the new sysfs path for the decrypted block device, and the
        * majore and minor numbers for it.  So, create the device, update the
        * path to the new sysfs path, and continue.
        */
        snprintf(nodepath,
                 sizeof(nodepath), "/dev/block/vold/%d:%d",
                 new_major, new_minor);
        if (createDeviceNode(nodepath, new_major, new_minor)) {
            SLOGE("Error making device node '%s' (%s)", nodepath,
                                                       strerror(errno));
        }

        // Todo: Either create sys filename from nodepath, or pass in bogus path so
        //       vold ignores state changes on this internal device.
        updateDeviceInfo(nodepath, new_major, new_minor);

        /* Get the device nodes again, because they just changed */
        n = getDeviceNodes((dev_t *) &deviceNodes, MAX_SUP_PART);
        if (!n) {
            SLOGE("Failed to get device nodes (%s)\n", strerror(errno));
            return -1;
        }
    }

    for (i = 0; i < n; i++) {
        char devicePath[255];

        sprintf(devicePath, "/dev/block/vold/%d:%d", MAJOR(deviceNodes[i]),
                MINOR(deviceNodes[i]));

        if (deviceNodes[i] == (dev_t)(-1)) {
            SLOGE("Partition '%s' is invalid dev_t. Skip mounting!", devicePath);
            continue;
        }

        SLOGI("%s being considered for volume %s\n", devicePath, getLabel());

        errno = 0;
        setState(Volume::State_Checking);

        /*
         * If FS check failed, we should move on to next partition
         * instead of returning an error
         */

__CHECK_FAT_AGAIN:
        if (Fat::check(devicePath)) {
#if 0
            if (errno == ENODATA) {
                SLOGW("%s does not contain a FAT filesystem\n", devicePath);
                continue;
            }
            errno = EIO;
            /* Badness - abort the mount */
            SLOGE("%s failed FS checks (%s)", devicePath, strerror(errno));
            setState(Volume::State_Idle);
            return -1;
#else

#ifdef MTK_EMMC_SUPPORT
            if ( mVm->isFirstBoot() && IsEmmcStorage()) {
                SLOGI("** This is first boot and internal sd is not formatted. Try to format it. (%s)\n", devicePath);
			    if (Fat::format(devicePath, 0)) {
				  SLOGE("Failed to format (%s)", strerror(errno));				  
			    }
                else {
                    SLOGI("Format successfully. (%s)\n", devicePath);
					property_set("persist.first_boot", "0");
                    goto __CHECK_FAT_AGAIN;
                }
            }
#endif

            SLOGW("%s failed FS checks, move on to next partition", devicePath);
            continue;
#endif                                        
        }

#ifdef MTK_EMMC_SUPPORT
        else {
             if ( mVm->isFirstBoot() && IsEmmcStorage()) {
                 property_set("persist.first_boot", "0");           
             }
        }  
#endif     


        /*
         * Mount the device on our internal staging mountpoint so we can
         * muck with it before exposing it to non priviledged users.
         */
        errno = 0;
        int gid;

        if (primaryStorage) {
            // Special case the primary SD card.
            // For this we grant write access to the SDCARD_RW group.
            gid = AID_SDCARD_RW;
        } else {
            // For secondary external storage we keep things locked up.
            /* Note: Change the google default setting from AID_MEDIA_RW to AID_SDCARD_RW. */
            gid = AID_SDCARD_RW;
        }
        if (Fat::doMount(devicePath, "/mnt/secure/staging", false, false, false,
                AID_SYSTEM, gid, 0702, true)) {
            SLOGE("%s failed to mount via VFAT (%s)\n", devicePath, strerror(errno));
            // kill the process anyway
            Process::killProcessesWithOpenFiles("/mnt/secure/staging", 2);
            continue;
        }

        SLOGI("Device %s, target %s mounted @ /mnt/secure/staging", devicePath, getMountpoint());
        SLOGI("PrimaryStory = %d, externalStorage = %s", primaryStorage, externalStorage);

        protectFromAutorunStupidity();

        // only create android_secure on primary storage
        if (primaryStorage && createBindMounts()) {
            SLOGE("Failed to create bindmounts (%s)", strerror(errno));
            umount("/mnt/secure/staging");
            setState(Volume::State_Idle);
            return -1;
        }

        /*
         * Now that the bindmount trickery is done, atomically move the
         * whole subtree to expose it to non priviledged users.
         */
        if (doMoveMount("/mnt/secure/staging", getMountpoint(), false)) {
            SLOGE("Failed to move mount (%s)", strerror(errno));
            umount("/mnt/secure/staging");
            setState(Volume::State_Idle);
            return -1;
        }
        setState(Volume::State_Mounted);
        mCurrentlyMountedKdev = deviceNodes[i];
        return 0;
    }

    SLOGE("Volume %s found no suitable devices for mounting :(\n", getLabel());
    spin_lock(&mStateLock);
    curState = getState();
    if ((curState != Volume::State_NoMedia) && 
	(curState != Volume::State_Mounted))
        setState(Volume::State_Idle);
        	
    if(curState == Volume::State_Mounted) {
	spin_unlock(&mStateLock);
        return 0;
    }
    spin_unlock(&mStateLock);
    return -1;
}
Esempio n. 5
0
int Volume::mountVol() {
    dev_t deviceNodes[DirectVolume::MAX_PARTITIONS];
    int n, i, rc = 0, curState;
    char errmsg[255];

    int flags = getFlags();
    
    /* we igore the setting of "VOL_PROVIDES_ASEC". if the storage is primary, then we will handle "Asec"  */
    //bool providesAsec = (flags & VOL_PROVIDES_ASEC) != 0;
    const char* externalStorage = getenv("EXTERNAL_STORAGE");
    bool providesAsec = externalStorage && !strcmp(getFuseMountpoint(), externalStorage);


    // TODO: handle "bind" style mounts, for emulated storage

    char decrypt_state[PROPERTY_VALUE_MAX];
    char crypto_state[PROPERTY_VALUE_MAX];
    char encrypt_progress[PROPERTY_VALUE_MAX];

    if (mPreState != Volume::State_Shared && mVm->isSomeVolumeShared()) {
        SLOGI("Some volume is State_Shared, force to share current volume, %s \n", getLabel());
        return mVm->shareVolume(getLabel(), "ums");
    }

    property_get("vold.decrypt", decrypt_state, "");
    property_get("vold.encrypt_progress", encrypt_progress, "");
#ifdef MTK_MULTI_PARTITION_MOUNT_ONLY_SUPPORT
    char *otgNodePath = getOtgNodePath();
#endif

    /* Don't try to mount the volumes if we have not yet entered the disk password
     * or are in the process of encrypting.
     */
    if ((getState() == Volume::State_NoMedia) ||
        ((!strcmp(decrypt_state, "trigger_restart_min_framework") || encrypt_progress[0]) && providesAsec)) {
        snprintf(errmsg, sizeof(errmsg),
                 "Volume %s %s mount failed - no media",
                 getLabel(), getFuseMountpoint());
        mVm->getBroadcaster()->sendBroadcast(
                                         ResponseCode::VolumeMountFailedNoMedia,
                                         errmsg, false);
        errno = ENODEV;
        return -1;
    } else if (getState() != Volume::State_Idle) {
        errno = EBUSY;
        if (getState() == Volume::State_Pending) {
            mRetryMount = true;
        }
        return -1;
    }

    if (isMountpointMounted(getMountpoint())) {
        SLOGW("Volume is idle but appears to be mounted - fixing");
        setState(Volume::State_Mounted);
        // mCurrentlyMountedKdev = XXX
        return 0;
    }

#ifdef MTK_SHARED_SDCARD
    SLOGI("mountvol: IsEmmcStorage=%d", IsEmmcStorage());
    if (IsEmmcStorage()) {
         property_set("ctl.start", "sdcard");
         waitForServiceState("sdcard", "running");
         setState(Volume::State_Mounted);
         return 0;
    }     
#endif

    n = getDeviceNodes((dev_t *) &deviceNodes, DirectVolume::MAX_PARTITIONS);
    if (!n) {
        SLOGE("Failed to get device nodes (%s)\n", strerror(errno));
        return -1;
    }
    SLOGD("Found %d device nodes", n);

#ifndef MTK_EMULATOR_SUPPORT

    if (!IsEmmcStorage() && !strncmp(getLabel(), "sdcard", 6)) {
#ifdef MTK_FAT_ON_NAND
       if( -1 == mLoopDeviceIdx){
#endif
          SLOGD("Reinit SD card");
            if (mVm->reinitExternalSD()){
              SLOGE("Fail: reinitExternalSD()");
              /* Card inserted but fail to reinit, there is something wrong with this card */
              errno = EIO;
              return -1;
            }
#ifdef MTK_FAT_ON_NAND
          }
#endif
    }
    
#endif

    /* If we're running encrypted, and the volume is marked as encryptable and nonremovable,
     * and also marked as providing Asec storage, then we need to decrypt
     * that partition, and update the volume object to point to it's new decrypted
     * block device
     */
    property_get("ro.crypto.state", crypto_state, "");
    if (providesAsec &&
        ((flags & (VOL_NONREMOVABLE | VOL_ENCRYPTABLE))==(VOL_NONREMOVABLE | VOL_ENCRYPTABLE)) &&
        !strcmp(crypto_state, "encrypted") && !isDecrypted()) {
       char new_sys_path[MAXPATHLEN];
       char nodepath[256];
       int new_major, new_minor;

       if (n != 1) {
           /* We only expect one device node returned when mounting encryptable volumes */
           SLOGE("Too many device nodes returned when mounting %s\n", getMountpoint());
           return -1;
       }

       if (cryptfs_setup_volume(getLabel(), MAJOR(deviceNodes[0]), MINOR(deviceNodes[0]),
                                new_sys_path, sizeof(new_sys_path),
                                &new_major, &new_minor)) {
           SLOGE("Cannot setup encryption mapping for %s\n", getMountpoint());
           return -1;
       }
#ifdef MTK_MULTI_PARTITION_MOUNT_ONLY_SUPPORT
    if (0 == strcmp(getLabel(), "usbotg")) {
        if (createDeviceNode(otgNodePath, new_major, new_minor)) {
            SLOGE("usbotg: Volume mountVol Error making device node '%s' (%s)", otgNodePath,
                                                       strerror(errno));
        }
        updateDeviceInfo(otgNodePath, new_major, new_minor);
    } else
#endif
       /* We now have the new sysfs path for the decrypted block device, and the
        * majore and minor numbers for it.  So, create the device, update the
        * path to the new sysfs path, and continue.
        */
    {
        snprintf(nodepath,
                 sizeof(nodepath), "/dev/block/vold/%d:%d",
                 new_major, new_minor);
        if (createDeviceNode(nodepath, new_major, new_minor)) {
            SLOGE("Error making device node '%s' (%s)", nodepath,
                                                       strerror(errno));
        }

        // Todo: Either create sys filename from nodepath, or pass in bogus path so
        //       vold ignores state changes on this internal device.
        updateDeviceInfo(nodepath, new_major, new_minor);

        /* Get the device nodes again, because they just changed */
        n = getDeviceNodes((dev_t *) &deviceNodes, DirectVolume::MAX_PARTITIONS);
        if (!n) {
            SLOGE("Failed to get device nodes (%s)\n", strerror(errno));
            return -1;
        }
    }
    }
#ifdef MTK_MULTI_PARTITION_MOUNT_ONLY_SUPPORT
    if (0 == strcmp(getLabel(), "usbotg")) {
        setState(Volume::State_Checking);

        if (0 != mkdir(getMountpoint(), 0700)) {
            SLOGE("usbotg: Volume mountVol (%s) mkdir failed (%s)" , getMountpoint(), strerror(errno));
        }
        else {
            SLOGD("usbotg: Volume mountVol (%s) mkdir success", getMountpoint());
        }
        if (0 != chown(getMountpoint(), AID_MEDIA_RW, AID_MEDIA_RW)) {
            SLOGE("usbotg: Volume mountVol (%s) mkdir failed (%s)" , getMountpoint(), strerror(errno));
        }
        else {
            SLOGD("usbotg: Volume mountVol (%s) mkdir success", getMountpoint());
        }

        if (0 != mkdir(getFuseMountpoint(), 0755)) {
            SLOGE("usbotg: Volume mountVol (%s) mkdir failed (%s)" , getFuseMountpoint(), strerror(errno));
        }
        else {
            SLOGD("usbotg: Volume mountVol (%s) mkdir success", getFuseMountpoint());
        }

        
        int fd;
        int counter = 0;

        while(1) {            
            counter++;
            if( counter == 10)
            {
            	SLOGD("timeout open otgNodePath counter:%d\n",counter);
            	break;
            }
            
            if ((fd = open(otgNodePath, O_RDONLY)) < 0) {
                 SLOGE(" cannot open device '%s' (errno=%d) (%s)", otgNodePath, errno,strerror(errno));
                 usleep(30000);
            } else {
                 SLOGD(" can access %s successfully", otgNodePath);    
                 close(fd);
                 break;
            }
        }

        if (Fat::check(otgNodePath)) {
            SLOGE("usbotg:  %s fat check fail (%s)\n", otgNodePath, strerror(errno));
            char cmd[255] = {0};
            sprintf(cmd, "/system/bin/sh -c \"rm -r %s\"", getFuseMountpoint());
            system(cmd);
            SLOGD("usbotg: Volume unmountVol cmd = %s !!!", cmd);
            sprintf(cmd, "/system/bin/sh -c \"rm -r %s\"", getMountpoint());
            system(cmd);
            SLOGD("usbotg: Volume unmountVol cmd = %s !!!", cmd);
            return -1;            
        }
        
        if (Fat::doMount(otgNodePath, getMountpoint(), false, false, false, 
            AID_MEDIA_RW, AID_MEDIA_RW, 0007, true)) {
            SLOGE("usbotg: Volume mountVol %s Otg failed to mount via VFAT (%s)\n", otgNodePath, strerror(errno));
            char cmd[255] = {0};
            sprintf(cmd, "/system/bin/sh -c \"rm -r %s\"", getFuseMountpoint());
            system(cmd);
            SLOGD("usbotg: Volume unmountVol cmd = %s !!!", cmd);
            sprintf(cmd, "/system/bin/sh -c \"rm -r %s\"", getMountpoint());
            system(cmd);
            SLOGD("usbotg: Volume unmountVol cmd = %s !!!", cmd);
	    setState(Volume::State_Idle);
            return -1;
        }
    
        extractMetadata(otgNodePath);

        //fork sdcard process instead of witch service in init.rc

        struct sigaction act, oact;
        act.sa_handler = sigCld;
        act.sa_flags = 0;
        sigemptyset(&act.sa_mask);

        if (sigaction(SIGCHLD, &act, &oact) <0) {
            SLOGD("Error occured on signal");
            return -1;
        }   
        
        pid_t pid = fork();

        if (pid < 0) {
            SLOGD("Error occured on fork");
            return 0;
        } else if (pid == 0) {
            SLOGD("usbotg: Volume mountVol go execv,pid=%d", pid);
            const char* mountCmd = "/system/bin/sdcard";
            const char* mountpoint = getMountpoint();
            const char* fusemountpoint = getFuseMountpoint();
            const char* argv0[] = {
                        mountCmd,                
                        "-u",                
                        "1023",               
                        "-g",                             
                        "1023", 
                        "-w",
                        "1023",
                        "-d",
                        mountpoint,
                        fusemountpoint,
                        NULL 
                    };
            SLOGD("%s %s %s %s %s %s %s %s %s %s", argv0[0], argv0[1], argv0[2], argv0[3], argv0[4], argv0[5], argv0[6], argv0[7], argv0[8], argv0[9]);

            if (execv(mountCmd,(char* const*)argv0) < 0) {
                ALOGE("execv(%s) failed: %s\n", mountCmd, strerror(errno));
                SLOGD("usbotg: Volume mountVol mounted failed");
                char cmd[255] = {0};
                sprintf(cmd, "/system/bin/sh -c \"rm -r %s\"", getFuseMountpoint());
                system(cmd);
                SLOGD("usbotg: Volume unmountVol cmd = %s !!!", cmd);
                sprintf(cmd, "/system/bin/sh -c \"rm -r %s\"", getMountpoint());
                system(cmd);
                SLOGD("usbotg: Volume unmountVol cmd = %s !!!", cmd);
                exit(127);
            }
            exit(127);
        } else{
            SLOGD("usbotg: Volume mountVol mounted succed,pid=%d",pid);
            setState(Volume::State_Mounted);
            mPid = pid;
            return 0;
        }
    }
#endif  

    for (i = 0; i < n; i++) {
        char devicePath[255];

        sprintf(devicePath, "/dev/block/vold/%d:%d", major(deviceNodes[i]),
                minor(deviceNodes[i]));

        if (deviceNodes[i] == (dev_t)(-1)) {
            SLOGE("Partition '%s' is invalid dev_t. Skip mounting!", devicePath);
            continue;
        }

        SLOGI("%s being considered for volume %s\n", devicePath, getLabel());

        errno = 0;
        if ((getState() == Volume::State_NoMedia) ) {
            SLOGI("NoMedia! skip mounting the storage. Update errno to ENODEV");
            errno = ENODEV;
            return -1;
        } 
        setState(Volume::State_Checking);

        /*
         * If FS check failed, we should move on to next partition
         * instead of returning an error
         */

__CHECK_FAT_AGAIN:
        if (Fat::check(devicePath)) {
#if 0
            if (errno == ENODATA) {
                SLOGW("%s does not contain a FAT filesystem\n", devicePath);
                continue;
            }
            errno = EIO;
            /* Badness - abort the mount */
            SLOGE("%s failed FS checks (%s)", devicePath, strerror(errno));
            setState(Volume::State_Idle);
            return -1;
#else

#ifdef MTK_EMMC_SUPPORT
            if ( mVm->isFirstBoot() && IsEmmcStorage()) {
                SLOGI("** This is first boot and internal sd is not formatted. Try to format it. (%s)\n", devicePath);
                if (Fat::format(devicePath, 0, false)) {
                  SLOGE("Failed to format (%s)", strerror(errno));                
                }
                else {
                    SLOGI("Format successfully. (%s)\n", devicePath);
                    property_set("persist.vold.first_boot", "0");
                    goto __CHECK_FAT_AGAIN;
                }
            }
#endif
#ifdef MTK_FAT_ON_NAND
            char first_boot[PROPERTY_VALUE_MAX] ;
            property_get("persist.vold.fat_first_boot", first_boot, "1");
            
            if (!strcmp(first_boot, "1") && !strcmp(getLabel(), "sdcard0")) {
                SLOGI("** This is first boot and internal sd is not formatted. Try to format it. (%s)\n", devicePath);
                if (Fat::format(devicePath, 0, false)) {
                  SLOGE("Failed to format %s(%d)", strerror(errno), errno);
                }
                else {
                    SLOGI("%s format successfully\n", devicePath);
                    property_set("persist.vold.fat_first_boot", "0");
                    goto __CHECK_FAT_AGAIN;
                }
            }
#endif
            SLOGW("%s failed FS checks, move on to next partition", devicePath);
            continue;
#endif                                        
        }

#ifdef MTK_EMMC_SUPPORT
        else {
             if ( mVm->isFirstBoot() && IsEmmcStorage()) {
                 property_set("persist.vold.first_boot", "0");           
             }
        }  
#endif     

        errno = 0;
        int gid;
#ifdef MTK_EMMC_DISCARD     
        if (Fat::doMount(devicePath, getMountpoint(), false, false, false,
                AID_MEDIA_RW, AID_MEDIA_RW, 0007, true, IsEmmcStorage())) {
            SLOGE("%s failed to mount via VFAT (%s)\n", devicePath, strerror(errno));
            continue;
        }
#else //MTK_EMMC_DISCARD   
        if (Fat::doMount(devicePath, getMountpoint(), false, false, false,
                AID_MEDIA_RW, AID_MEDIA_RW, 0007, true)) {
            SLOGE("%s failed to mount via VFAT (%s)\n", devicePath, strerror(errno));
            continue;
        }
#endif //MTK_EMMC_DISCARD           

        SLOGI("providesAsec = %d", providesAsec);

        extractMetadata(devicePath);

#ifdef MTK_2SDCARD_SWAP
        char secImgDir[PATH_MAX];  
        sprintf(secImgDir, "%s/.android_secure", getMountpoint());
        SLOGI("Create %s in advance", secImgDir);
        /* Whether primary or secondary storage, create .android folder in advance to prevent from media out of space for Bindmounts fail 
           This case happens in SWAP feature.
        */
        if (access(secImgDir, R_OK | X_OK)) {
          if (errno == ENOENT) {
              if (mkdir(secImgDir, 0777)) {
                  SLOGE("Failed to create %s (%s)", secImgDir, strerror(errno));
              }
          } else {
              SLOGE("Failed to access %s (%s)", secImgDir, strerror(errno));
          }
        }
#endif

        if (providesAsec && mountAsecExternal() != 0) {
            SLOGE("Failed to mount secure area (%s)", strerror(errno));
            umount(getMountpoint());
            setState(Volume::State_Idle);
            return -1;
        }

        char service[64];
        char service_id[64];
        strcpy(service_id, getMountpoint()+strlen(Volume::MEDIA_DIR)+1);
        snprintf(service, 64, "fuse_%s", service_id);
        property_set("ctl.start", service);
        waitForServiceState(service, "running");

        int fd;
        if ((fd = open(devicePath, O_RDONLY)) < 0) {
           SLOGE("Cannot open device '%s' (errno=%d)", devicePath, errno);
        }
        else {
           setState(Volume::State_Mounted, Fat::isFat32(fd));
           close(fd);
        }
        mCurrentlyMountedKdev = deviceNodes[i];
        return 0;
    }

    SLOGE("Volume %s found no suitable devices for mounting :(\n", getLabel());

    curState = getState();
    if (curState == Volume::State_NoMedia) {
        SLOGI("Mount fail caused by NoMedia! Update errno to ENODEV");
        errno = ENODEV;
    } 

    if ((curState != Volume::State_NoMedia) && 
        (curState != Volume::State_Mounted)) {
         setState(Volume::State_Idle);
    }

    if(curState == Volume::State_Mounted) {
        return 0;
    }
    return -1;
}