/*
* Set read only
*/
static int
dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
{
struct dasd_device *base;
int intval, rc;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (bdev != bdev->bd_contains)
// ro setting is not allowed for partitions
return -EINVAL;
if (get_user(intval, (int __user *)argp))
return -EFAULT;
base = dasd_device_from_gendisk(bdev->bd_disk);
if (!base)
return -ENODEV;
if (!intval && test_bit(DASD_FLAG_DEVICE_RO, &base->flags)) {
dasd_put_device(base);
return -EROFS;
}
set_disk_ro(bdev->bd_disk, intval);
rc = dasd_set_feature(base->cdev, DASD_FEATURE_READONLY, intval);
dasd_put_device(base);
return rc;
}
/*
* Format device.
*/
static int
dasd_ioctl_format(struct block_device *bdev, void __user *argp)
{
struct dasd_device *base;
struct format_data_t fdata;
int rc;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (!argp)
return -EINVAL;
base = dasd_device_from_gendisk(bdev->bd_disk);
if (!base)
return -ENODEV;
if (base->features & DASD_FEATURE_READONLY ||
test_bit(DASD_FLAG_DEVICE_RO, &base->flags)) {
dasd_put_device(base);
return -EROFS;
}
if (copy_from_user(&fdata, argp, sizeof(struct format_data_t))) {
dasd_put_device(base);
return -EFAULT;
}
if (bdev != bdev->bd_contains) {
pr_warning("%s: The specified DASD is a partition and cannot "
"be formatted\n",
dev_name(&base->cdev->dev));
dasd_put_device(base);
return -EINVAL;
}
rc = dasd_format(base->block, &fdata);
dasd_put_device(base);
return rc;
}
/*
* Disable device.
* Used by dasdfmt. Disable I/O operations but allow ioctls.
*/
static int
dasd_ioctl_disable(struct block_device *bdev)
{
struct dasd_device *base;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
base = dasd_device_from_gendisk(bdev->bd_disk);
if (!base)
return -ENODEV;
/*
* Man this is sick. We don't do a real disable but only downgrade
* the device to DASD_STATE_BASIC. The reason is that dasdfmt uses
* BIODASDDISABLE to disable accesses to the device via the block
* device layer but it still wants to do i/o on the device by
* using the BIODASDFMT ioctl. Therefore the correct state for the
* device is DASD_STATE_BASIC that allows to do basic i/o.
*/
dasd_set_target_state(base, DASD_STATE_BASIC);
/*
* Set i_size to zero, since read, write, etc. check against this
* value.
*/
mutex_lock(&bdev->bd_mutex);
i_size_write(bdev->bd_inode, 0);
mutex_unlock(&bdev->bd_mutex);
dasd_put_device(base);
return 0;
}
static void dasd_stats_all_block_reset(void)
{
int i;
struct dasd_device *device;
for (i = 0; i < dasd_max_devindex; ++i) {
device = dasd_device_from_devindex(i);
if (IS_ERR(device))
continue;
if (device->block)
dasd_profile_reset(&device->block->profile);
dasd_put_device(device);
}
}
static int dasd_stats_all_block_on(void)
{
int i, rc;
struct dasd_device *device;
rc = 0;
for (i = 0; i < dasd_max_devindex; ++i) {
device = dasd_device_from_devindex(i);
if (IS_ERR(device))
continue;
if (device->block)
rc = dasd_profile_on(&device->block->profile);
dasd_put_device(device);
if (rc)
return rc;
}
return 0;
}
/*
* Enable device.
* used by dasdfmt after BIODASDDISABLE to retrigger blocksize detection
*/
static int
dasd_ioctl_enable(struct block_device *bdev)
{
struct dasd_device *base;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
base = dasd_device_from_gendisk(bdev->bd_disk);
if (!base)
return -ENODEV;
dasd_enable_device(base);
/* Formatting the dasd device can change the capacity. */
mutex_lock(&bdev->bd_mutex);
i_size_write(bdev->bd_inode,
(loff_t)get_capacity(base->block->gdp) << 9);
mutex_unlock(&bdev->bd_mutex);
dasd_put_device(base);
return 0;
}
static int
dasd_devices_show(struct seq_file *m, void *v)
{
struct dasd_device *device;
struct dasd_block *block;
char *substr;
device = dasd_device_from_devindex((unsigned long) v - 1);
if (IS_ERR(device))
return 0;
if (device->block)
block = device->block;
else {
dasd_put_device(device);
return 0;
}
/* Print device number. */
seq_printf(m, "%s", dev_name(&device->cdev->dev));
/* Print discipline string. */
if (device != NULL && device->discipline != NULL)
seq_printf(m, "(%s)", device->discipline->name);
else
seq_printf(m, "(none)");
/* Print kdev. */
if (block->gdp)
seq_printf(m, " at (%3d:%6d)",
MAJOR(disk_devt(block->gdp)),
MINOR(disk_devt(block->gdp)));
else
seq_printf(m, " at (???:??????)");
/* Print device name. */
if (block->gdp)
seq_printf(m, " is %-8s", block->gdp->disk_name);
else
seq_printf(m, " is ????????");
/* Print devices features. */
substr = (device->features & DASD_FEATURE_READONLY) ? "(ro)" : " ";
seq_printf(m, "%4s: ", substr);
/* Print device status information. */
switch ((device != NULL) ? device->state : -1) {
case -1:
seq_printf(m, "unknown");
break;
case DASD_STATE_NEW:
seq_printf(m, "new");
break;
case DASD_STATE_KNOWN:
seq_printf(m, "detected");
break;
case DASD_STATE_BASIC:
seq_printf(m, "basic");
break;
case DASD_STATE_UNFMT:
seq_printf(m, "unformatted");
break;
case DASD_STATE_READY:
case DASD_STATE_ONLINE:
seq_printf(m, "active ");
if (dasd_check_blocksize(block->bp_block))
seq_printf(m, "n/f ");
else
seq_printf(m,
"at blocksize: %d, %ld blocks, %ld MB",
block->bp_block, block->blocks,
((block->bp_block >> 9) *
block->blocks) >> 11);
break;
default:
seq_printf(m, "no stat");
break;
}
dasd_put_device(device);
if (dasd_probeonly)
seq_printf(m, "(probeonly)");
seq_printf(m, "\n");
return 0;
}
int dasd_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct dasd_block *block;
struct dasd_device *base;
void __user *argp;
int rc;
if (is_compat_task())
argp = compat_ptr(arg);
else
argp = (void __user *)arg;
if ((_IOC_DIR(cmd) != _IOC_NONE) && !arg) {
PRINT_DEBUG("empty data ptr");
return -EINVAL;
}
base = dasd_device_from_gendisk(bdev->bd_disk);
if (!base)
return -ENODEV;
block = base->block;
rc = 0;
switch (cmd) {
case BIODASDDISABLE:
rc = dasd_ioctl_disable(bdev);
break;
case BIODASDENABLE:
rc = dasd_ioctl_enable(bdev);
break;
case BIODASDQUIESCE:
rc = dasd_ioctl_quiesce(block);
break;
case BIODASDRESUME:
rc = dasd_ioctl_resume(block);
break;
case BIODASDFMT:
rc = dasd_ioctl_format(bdev, argp);
break;
case BIODASDINFO:
rc = dasd_ioctl_information(block, cmd, argp);
break;
case BIODASDINFO2:
rc = dasd_ioctl_information(block, cmd, argp);
break;
case BIODASDPRRD:
rc = dasd_ioctl_read_profile(block, argp);
break;
case BIODASDPRRST:
rc = dasd_ioctl_reset_profile(block);
break;
case BLKROSET:
rc = dasd_ioctl_set_ro(bdev, argp);
break;
case DASDAPIVER:
rc = dasd_ioctl_api_version(argp);
break;
case BIODASDCMFENABLE:
rc = enable_cmf(base->cdev);
break;
case BIODASDCMFDISABLE:
rc = disable_cmf(base->cdev);
break;
case BIODASDREADALLCMB:
rc = dasd_ioctl_readall_cmb(block, cmd, argp);
break;
default:
/* if the discipline has an ioctl method try it. */
if (base->discipline->ioctl) {
rc = base->discipline->ioctl(block, cmd, argp);
if (rc == -ENOIOCTLCMD)
rc = -EINVAL;
} else
rc = -EINVAL;
}
dasd_put_device(base);
return rc;
}
static int
dasd_devices_show(struct seq_file *m, void *v)
{
struct dasd_device *device;
char *substr;
device = dasd_device_from_devindex((unsigned long) v - 1);
if (IS_ERR(device))
return 0;
/* Print device number. */
seq_printf(m, "%s", device->cdev->dev.bus_id);
/* Print discipline string. */
if (device != NULL && device->discipline != NULL)
seq_printf(m, "(%s)", device->discipline->name);
else
seq_printf(m, "(none)");
/* Print kdev. */
if (device->gdp)
seq_printf(m, " at (%3d:%6d)",
device->gdp->major, device->gdp->first_minor);
else
seq_printf(m, " at (???:??????)");
/* Print device name. */
if (device->gdp)
seq_printf(m, " is %-8s", device->gdp->disk_name);
else
seq_printf(m, " is ????????");
/* Print devices features. */
substr = test_bit(DASD_FLAG_RO, &device->flags) ? "(ro)" : " ";
seq_printf(m, "%4s: ", substr);
/* Print device status information. */
switch ((device != NULL) ? device->state : -1) {
case -1:
seq_printf(m, "unknown");
break;
case DASD_STATE_NEW:
seq_printf(m, "new");
break;
case DASD_STATE_KNOWN:
seq_printf(m, "detected");
break;
case DASD_STATE_BASIC:
seq_printf(m, "basic");
break;
case DASD_STATE_READY:
case DASD_STATE_ONLINE:
seq_printf(m, "active ");
if (dasd_check_blocksize(device->bp_block))
seq_printf(m, "n/f ");
else
seq_printf(m,
"at blocksize: %d, %ld blocks, %ld MB",
device->bp_block, device->blocks,
((device->bp_block >> 9) *
device->blocks) >> 11);
break;
default:
seq_printf(m, "no stat");
break;
}
dasd_put_device(device);
if (dasd_probeonly)
seq_printf(m, "(probeonly)");
seq_printf(m, "\n");
return 0;
}
