Esempi in C++ (Cpp) per db120_pci_init

Esempio n. 1

File: mach-db120.c Progetto: markosilla/linux-raspberry

static void __init db120_setup(void)
{
    u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);

    ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
                             db120_leds_gpio);
    ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
                                    ARRAY_SIZE(db120_gpio_keys),
                                    db120_gpio_keys);
    ath79_register_spi(&db120_spi_data, db120_spi_info,
                       ARRAY_SIZE(db120_spi_info));
    ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
    db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
}

Esempio n. 2

File: mach-db120.c Progetto: IoveSunny/DreamBox

static void __init db120_setup(void)
{
	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);

	ar71xx_add_device_usb();

	ar71xx_add_device_m25p80(&db120_flash_data);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
					db120_leds_gpio);

	ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
					 ARRAY_SIZE(db120_gpio_keys),
					 db120_gpio_keys);

	ar9xxx_add_device_wmac(art + DB120_CALDATA_OFFSET,
				art + DB120_WMAC_MAC_OFFSET);

	db120_pci_init();
}

Esempio n. 3

File: mach-db120.c Progetto: dtaht/Cerowrt.rc7

static void __init db120_setup(void)
{
	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);

	ar71xx_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);

	ar71xx_add_device_usb();

	ar71xx_add_device_m25p80(&db120_flash_data);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
					db120_leds_gpio);

	ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
					 ARRAY_SIZE(db120_gpio_keys),
					 db120_gpio_keys);

	ar71xx_add_device_mdio(0, 0x0);
	ar71xx_add_device_mdio(1, 0x0);

	/* GMAC0 is connected to an AR8327 switch */
	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth0_data.speed = SPEED_1000;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_add_device_eth(0);

	/* GMAC1 is connected to the internal switch */
	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
	ar71xx_eth1_data.speed = SPEED_100;
	ar71xx_eth1_data.duplex = DUPLEX_FULL;

	ar71xx_add_device_eth(1);

	ar9xxx_add_device_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);

	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
}