static bool device_is_probe_target(backend_probe_target probe_target,
libusb_device *dev)
{
bool is_probe_target = false;
switch (probe_target) {
case BACKEND_PROBE_BLADERF:
is_probe_target = device_is_bladerf(dev);
if (is_probe_target) {
log_verbose("Found a bladeRF\n");
}
break;
case BACKEND_PROBE_FX3_BOOTLOADER:
is_probe_target = device_is_fx3_bootloader(dev);
if (is_probe_target) {
log_verbose("Found an FX3 bootloader.\n");
}
break;
default:
assert(!"Invalid probe target");
}
return is_probe_target;
}
static int lusb_open_bootloader(void **driver, uint8_t bus, uint8_t addr)
{
int status;
struct libusb_device **dev_list = NULL;
ssize_t dev_list_size, i;
struct bladerf_lusb *lusb;
*driver = NULL;
lusb = calloc(1, sizeof(lusb[0]));
if (lusb == NULL) {
return BLADERF_ERR_MEM;
}
status = libusb_init(&lusb->context);
if (status != 0) {
log_debug("Failed to initialize libusb context: %s\n",
libusb_error_name(status));
goto error;
}
dev_list_size = libusb_get_device_list(lusb->context, &dev_list);
if (dev_list_size < 0) {
log_debug("Failed to get device list: %s\n", libusb_error_name(status));
status = (int) dev_list_size;
goto error;
}
for (i = 0; i < dev_list_size; i++) {
if (device_is_fx3_bootloader(dev_list[i]) &&
bus_matches(bus, dev_list[i]) &&
addr_matches(addr, dev_list[i])) {
status = libusb_open(dev_list[i], &lusb->handle);
if (status != 0) {
log_debug("Failed to open device: %s\n",
libusb_error_name(status));
goto error;
} else {
status = libusb_claim_interface(lusb->handle, 0);
if (status < 0) {
log_debug("Failed to claim interface: %s\n",
libusb_error_name(status));
goto error;
} else {
log_verbose("Opened bootloader at %u:%u\n",
libusb_get_bus_number(dev_list[i]),
libusb_get_device_address(dev_list[i]));
*driver = lusb;
}
break;
}
}
}
error:
if (dev_list != NULL) {
libusb_free_device_list(dev_list, 1);
}
if (status != 0) {
status = error_conv(status);
lusb_close_bootloader(lusb);
} else if (*driver == NULL) {
status = BLADERF_ERR_NODEV;
lusb_close_bootloader(lusb);
}
return status;
}
static int lusb_open(void **driver,
struct bladerf_devinfo *info_in,
struct bladerf_devinfo *info_out)
{
int status, i, n;
int fx3_status;
ssize_t count;
struct bladerf_lusb *lusb = NULL;
libusb_device **list = NULL;
struct bladerf_devinfo thisinfo;
libusb_context *context;
/* Initialize libusb for device tree walking */
status = libusb_init(&context);
if (status) {
log_error("Could not initialize libusb: %s\n",
libusb_error_name(status));
status = error_conv(status);
goto error;
}
/* We can only print this out when log output is enabled, or else we'll
* get snagged by -Werror=unused-but-set-variable */
# ifdef LOGGING_ENABLED
{
char buf[64];
get_libusb_version(buf, sizeof(buf));
log_verbose("Using libusb version: %s\n", buf);
}
# endif
/* Iterate through all the USB devices */
count = libusb_get_device_list(context, &list);
for (i = 0, n = 0; i < count; i++) {
if (device_is_bladerf(list[i])) {
log_verbose("Found a bladeRF (based upon VID/PID)\n");
/* Open the USB device and get some information */
status = get_devinfo(list[i], &thisinfo);
if(status < 0) {
log_debug("Could not open bladeRF device: %s\n",
libusb_error_name(status) );
status = error_conv(status);
goto error;
}
thisinfo.instance = n++;
/* Check to see if this matches the info struct */
if (bladerf_devinfo_matches(&thisinfo, info_in)) {
lusb = (struct bladerf_lusb *)malloc(sizeof(struct bladerf_lusb));
if (lusb == NULL) {
log_debug("Skipping instance %d due to failed allocation\n",
thisinfo.instance);
lusb = NULL;
continue;
}
lusb->context = context;
lusb->dev = list[i];
status = libusb_open(list[i], &lusb->handle);
if (status < 0) {
status = error_conv(status);
goto error;
}
status = libusb_claim_interface(lusb->handle, 0);
if(status < 0) {
log_debug("Could not claim interface: %s\n",
libusb_error_name(status));
status = error_conv(status);
goto error;
}
memcpy(info_out, &thisinfo, sizeof(struct bladerf_devinfo));
*driver = lusb;
break;
} else {
log_verbose("Devinfo doesn't match - skipping"
"(instance=%d, serial=%d, bus/addr=%d\n",
bladerf_instance_matches(&thisinfo, info_in),
bladerf_serial_matches(&thisinfo, info_in),
bladerf_bus_addr_matches(&thisinfo, info_in));
}
}
if (device_is_fx3_bootloader(list[i])) {
fx3_status = get_devinfo(list[i], &thisinfo);
if (fx3_status != 0) {
log_debug("Could not open FX3 bootloader device: %s\n",
libusb_error_name(fx3_status));
continue;
}
log_info("Found FX3 bootloader device on bus=%d addr=%d. "
"This may be a bladeRF.\n",
thisinfo.usb_bus, thisinfo.usb_addr);
log_info("Use bladeRF-cli command \"recover %d %d "
"<FX3 firmware>\" to boot the bladeRF firmware.\n",
thisinfo.usb_bus, thisinfo.usb_addr);
}
}
error:
if (list) {
libusb_free_device_list(list, 1);
}
if (lusb == NULL) {
log_debug("No devices available on the libusb backend.\n");
status = BLADERF_ERR_NODEV;
}
if (status != 0) {
if (lusb != NULL) {
if (lusb->handle) {
libusb_close(lusb->handle);
}
free(lusb);
}
libusb_exit(context);
}
return status;
}
static int lusb_probe(struct bladerf_devinfo_list *info_list)
{
int status, i, n;
ssize_t count;
libusb_device **list;
struct bladerf_devinfo info;
libusb_context *context;
/* Initialize libusb for device tree walking */
status = libusb_init(&context);
if (status) {
log_error("Could not initialize libusb: %s\n",
libusb_error_name(status));
goto lusb_probe_done;
}
count = libusb_get_device_list(context, &list);
/* Iterate through all the USB devices */
for (i = 0, n = 0; i < count && status == 0; i++) {
if (device_is_bladerf(list[i])) {
log_verbose("Found bladeRF (based upon VID/PID)\n");
/* Open the USB device and get some information */
status = get_devinfo(list[i], &info);
if (status) {
log_error("Could not open bladeRF device: %s\n",
libusb_error_name(status) );
} else {
info.instance = n++;
status = bladerf_devinfo_list_add(info_list, &info);
if( status ) {
log_error("Could not add device to list: %s\n",
bladerf_strerror(status) );
} else {
log_verbose("Added instance %d to device list\n",
info.instance);
}
}
}
if (device_is_fx3_bootloader(list[i])) {
status = get_devinfo(list[i], &info);
if (status) {
log_error("Could not open bladeRF device: %s\n",
libusb_error_name(status) );
continue;
}
log_info("Found FX3 bootloader device on bus=%d addr=%d. This may "
"be a bladeRF.\nUse the bladeRF-cli command \"recover"
" %d %d <FX3 firmware>\" to boot the bladeRF firmware.\n",
info.usb_bus, info.usb_addr, info.usb_bus, info.usb_addr);
}
}
libusb_free_device_list(list, 1);
libusb_exit(context);
lusb_probe_done:
return status;
}