static void update_motor_power()
{
digipot_current(0, motor_current_setting[0]);
digipot_current(1, motor_current_setting[1]);
digipot_current(2, motor_current_setting[2]);
Config_StoreSettings();
}
static void lcd_menu_first_run_material_select_material()
{
LED_GLOW();
uint8_t count = eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET());
lcd_scroll_menu(PSTR("MATERIAL"), count, lcd_material_select_callback, lcd_material_select_details_callback);
CLEAR_PROGRESS_NR(17);
lcd_lib_update_screen();
if (lcd_lib_button_pressed)
{
digipot_current(2, motor_current_setting[2]);//Set E motor power to default.
for(uint8_t e=0; e<EXTRUDERS; e++)
lcd_material_set_material(SELECTED_SCROLL_MENU_ITEM(), e);
SET_FIRST_RUN_DONE();
lcd_change_to_menu(lcd_menu_first_run_material_select_confirm_material);
strcat_P(card.longFilename, PSTR(" as material,"));
}
}
static void lcd_menu_change_material_insert_forward()
{
lcd_info_screen(lcd_menu_main, cancelMaterialInsert);
lcd_lib_draw_stringP(3, 20, PSTR("Forwarding material"));
if (!blocks_queued())
{
lcd_lib_beep();
led_glow_dir = led_glow = 0;
digipot_current(2, motor_current_setting[2]*2/3);//Set the E motor power lower to we skip instead of grind.
currentMenu = lcd_menu_change_material_insert;
SELECT_MAIN_MENU_ITEM(0);
}
long pos = st_get_position(E_AXIS);
long targetPos = lround(FILAMENT_FORWARD_LENGTH*axis_steps_per_unit[E_AXIS]);
uint8_t progress = (pos * 125 / targetPos);
lcd_progressbar(progress);
lcd_lib_update_screen();
}
static void lcd_menu_first_run_material_load_forward()
{
lcd_basic_screen();
DRAW_PROGRESS_NR(14);
lcd_lib_draw_string_centerP(20, PSTR("Loading material..."));
if (!blocks_queued())
{
lcd_lib_beep();
led_glow_dir = led_glow = 0;
digipot_current(2, motor_current_setting[2]*2/3);//Set E motor power lower so the motor will skip instead of grind.
currentMenu = lcd_menu_first_run_material_load_wait;
SELECT_MAIN_MENU_ITEM(0);
}
long pos = st_get_position(E_AXIS);
long targetPos = lround(FILAMENT_FORWARD_LENGTH*axis_steps_per_unit[E_AXIS]);
uint8_t progress = (pos * 125 / targetPos);
lcd_progressbar(progress);
lcd_lib_update_screen();
}
static void lcd_menu_first_run_material_select_1()
{
if (eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET()) == 1)
{
digipot_current(2, motor_current_setting[2]);//Set E motor power to default.
for(uint8_t e=0; e<EXTRUDERS; e++)
lcd_material_set_material(0, e);
SET_FIRST_RUN_DONE();
currentMenu = lcd_menu_first_run_print_1;
return;
}
SELECT_MAIN_MENU_ITEM(0);
lcd_info_screen(lcd_menu_first_run_material_select_material, doCooldown, PSTR("READY"));
DRAW_PROGRESS_NR(16);
lcd_lib_draw_string_centerP(10, PSTR("Next, select the"));
lcd_lib_draw_string_centerP(20, PSTR("material you have"));
lcd_lib_draw_string_centerP(30, PSTR("inserted in this"));
lcd_lib_draw_string_centerP(40, PSTR("Ultimaker2."));
lcd_lib_update_screen();
}
static void lcd_menu_first_run_material_select_pla_abs()
{
LED_GLOW();
lcd_tripple_menu(PSTR("PLA"), PSTR("ABS"), NULL);
DRAW_PROGRESS_NR(17);
lcd_lib_update_screen();
if (lcd_lib_button_pressed)
{
digipot_current(2, motor_current_setting[2]);//Set E motor power to default.
if (IS_SELECTED_MAIN(0))
{
lcd_material_reset_defaults();
lcd_material_set_material(0);
lcd_change_to_menu(lcd_menu_first_run_material_select_confirm_pla);
}
else if (IS_SELECTED_MAIN(1))
{
lcd_material_reset_defaults();
lcd_material_set_material(1);
lcd_change_to_menu(lcd_menu_first_run_material_select_confirm_abs);
}
}
}
static void cancelMaterialInsert()
{
digipot_current(2, motor_current_setting[2]);//Set E motor power to default.
doCooldown();
enquecommand_P(PSTR("G28 X0 Y0"));
}
static void cancelMaterialInsert()
{
set_extrude_min_temp(EXTRUDE_MINTEMP);
digipot_current(2, motor_current_setting[2]);//Set E motor power to default.
}
