int main(
int argc,
char *argv[])
{
uint16_t pdu_len = 0;
/* argv has the "COM4" or some other device */
if (argc > 1) {
Network_Interface = argv[1];
}
dlmstp_set_baud_rate(38400);
dlmstp_set_mac_address(0x05);
dlmstp_set_max_info_frames(DEFAULT_MAX_INFO_FRAMES);
dlmstp_set_max_master(DEFAULT_MAX_MASTER);
dlmstp_init(Network_Interface);
/* forever task */
for (;;) {
pdu_len = dlmstp_receive(NULL, NULL, 0, INFINITE);
#if 0
MSTP_Create_And_Send_Frame(&MSTP_Port, FRAME_TYPE_TEST_REQUEST,
MSTP_Port.SourceAddress, MSTP_Port.This_Station, NULL, 0);
#endif
}
return 0;
}
/** Initialize the DataLink configuration from Environment variables,
* or else to defaults.
* @ingroup DataLink
* The items configured depend on which BACDL_ the code is built for,
* eg, BACDL_BIP.
*
* For most items, checks first for an environment variable, and, if
* found, uses that to set the item's value. Otherwise, will set
* to a default value.
*
* The Environment Variables, by BACDL_ type, are:
* - BACDL_ALL: (the general-purpose solution)
* - BACNET_DATALINK to set which BACDL_ type we are using.
* - (Any):
* - BACNET_APDU_TIMEOUT - set this value in milliseconds to change
* the APDU timeout. APDU Timeout is how much time a client
* waits for a response from a BACnet device.
* - BACNET_APDU_RETRIES - indicate the maximum number of times that
* an APDU shall be retransmitted.
* - BACNET_IFACE - set this value to dotted IP address (Windows) of
* the interface (see ipconfig command on Windows) for which you
* want to bind. On Linux, set this to the /dev interface
* (i.e. eth0, arc0). Default is eth0 on Linux, and the default
* interface on Windows. Hence, if there is only a single network
* interface on Windows, the applications will choose it, and this
* setting will not be needed.
* - BACDL_BIP: (BACnet/IP)
* - BACNET_IP_PORT - UDP/IP port number (0..65534) used for BACnet/IP
* communications. Default is 47808 (0xBAC0).
* - BACNET_BBMD_PORT - UDP/IP port number (0..65534) used for Foreign
* Device Registration. Defaults to 47808 (0xBAC0).
* - BACNET_BBMD_TIMETOLIVE - number of seconds used in Foreign Device
* Registration (0..65535). Defaults to 60000 seconds.
* - BACNET_BBMD_ADDRESS - dotted IPv4 address of the BBMD or Foreign
* Device Registrar.
* - BACDL_MSTP: (BACnet MS/TP)
* - BACNET_MAX_INFO_FRAMES
* - BACNET_MAX_MASTER
* - BACNET_MSTP_BAUD
* - BACNET_MSTP_MAC
*/
void dlenv_init(
void)
{
char *pEnv = NULL;
#if defined(BACDL_ALL)
pEnv = getenv("BACNET_DATALINK");
if (pEnv) {
datalink_set(pEnv);
} else {
datalink_set(NULL);
}
#endif
#if defined(BACDL_BIP)
#if defined(BIP_DEBUG)
BIP_Debug = true;
#endif
pEnv = getenv("BACNET_IP_PORT");
if (pEnv) {
bip_set_port(htons((uint16_t) strtol(pEnv, NULL, 0)));
} else {
/* BIP_Port is statically initialized to 0xBAC0,
* so if it is different, then it was programmatically altered,
* and we shouldn't just stomp on it here.
* Unless it is set below 1024, since:
* "The range for well-known ports managed by the IANA is 0-1023."
*/
if (ntohs(bip_get_port()) < 1024)
bip_set_port(htons(0xBAC0));
}
#elif defined(BACDL_MSTP)
pEnv = getenv("BACNET_MAX_INFO_FRAMES");
if (pEnv) {
dlmstp_set_max_info_frames(strtol(pEnv, NULL, 0));
} else {
dlmstp_set_max_info_frames(1);
}
pEnv = getenv("BACNET_MAX_MASTER");
if (pEnv) {
dlmstp_set_max_master(strtol(pEnv, NULL, 0));
} else {
dlmstp_set_max_master(127);
}
pEnv = getenv("BACNET_MSTP_BAUD");
if (pEnv) {
dlmstp_set_baud_rate(strtol(pEnv, NULL, 0));
} else {
dlmstp_set_baud_rate(38400);
}
pEnv = getenv("BACNET_MSTP_MAC");
if (pEnv) {
dlmstp_set_mac_address(strtol(pEnv, NULL, 0));
} else {
dlmstp_set_mac_address(127);
}
#endif
pEnv = getenv("BACNET_APDU_TIMEOUT");
if (pEnv) {
apdu_timeout_set((uint16_t) strtol(pEnv, NULL, 0));
} else {
#if defined(BACDL_MSTP)
apdu_timeout_set(60000);
#endif
}
pEnv = getenv("BACNET_APDU_RETRIES");
if (pEnv) {
apdu_retries_set((uint8_t) strtol(pEnv, NULL, 0));
}
if (!datalink_init(getenv("BACNET_IFACE"))) {
exit(1);
}
#if (MAX_TSM_TRANSACTIONS)
pEnv = getenv("BACNET_INVOKE_ID");
if (pEnv) {
tsm_invokeID_set((uint8_t) strtol(pEnv, NULL, 0));
}
#endif
dlenv_register_as_foreign_device();
}
