void
// do_upgrade_cgi(char *url, FILE *stream)
do_upgrade_cgi(struct mime_handler *handler, char *url, webs_t streamm, char *query) // jimmy,
// https,
// 8/6/2003
{
#ifndef ANTI_FLASH
fprintf(stderr, "do post\n");
if (upgrade_ret)
do_ej(handler, "Fail_u_s.asp", stream, NULL);
else
do_ej(handler, "Success_u_s.asp", stream, NULL);
fprintf(stderr, "websdone\n");
websDone(stream, 200);
fprintf(stderr, "reboot\n");
/*
* Reboot if successful
*/
if (upgrade_ret == 0) {
sleep(5);
sys_reboot();
}
#else
do_ej(handler, "Fail_u_s.asp", stream, NULL);
websDone(stream, 200);
#endif
}
void ej_show_index_setting(webs_t wp, int argc, char_t ** argv)
{
char *type;
type = GOZILA_GET(wp, "wan_proto");
if (type == NULL)
type = nvram_safe_get("wan_proto");
#ifdef HAVE_DSL_CPE_CONTROL
do_ej(NULL, "index_atm.asp", wp, NULL);
#endif
char ejname[32];
snprintf(ejname, 31, "index_%s.asp", type);
do_ej(NULL, ejname, wp, NULL);
}
void ej_show_status_setting(webs_t wp, int argc, char_t ** argv)
{
do_ej(NULL, "Status_Router1.asp", wp, NULL);
return;
}
void ej_atmsettings(webs_t wp, int argc, char_t ** argv)
{
#ifdef HAVE_DSL_CPE_CONTROL
char ejname[32];
snprintf(ejname, 31, "index_%s_atm.asp", argv[0]);
do_ej(NULL, ejname, wp, NULL);
#endif
}
void
als_do_ej(char *file , webs_t stream , ...)
{
char path[512],pattern[512];
char p_1[8]="1",p_2[8]="0";
sscanf(file,"%[^?]?%s",path,pattern);
sscanf(pattern,"%[^&]&%s",p_1,p_2);
do_ej(&path,stream,p_1,p_2,"");
}
// do_upload
// do the image uploading.
// return: void
//
int do_upload_pre(FILE * stream, int upload_len, int upload_type)
{
int status = WEB_STS_UPLOAD;
httpd2sysmonitor_sysledCtrol(SYSLED_STS_BUSY);
glbUploadStatus = upLoadImage(stream, upload_len, upload_type, &imagePtr, &imageType, &imageLen, &fNeedReset);
glbUploadMode = upload_type;
if (glbUploadStatus != UPLOAD_OK) // processes are not killed. no filename...
{
http2dbs_writeOptlog(-1, "upgrading firmware image");
do_ej("/webs/uploadinfo.html", stream);
status = WEB_STS_ERROR;
httpd2sysmonitor_sysledCtrol(SYSLED_STS_NORMAL);
}
return status;
}
int
ej_wlv_sec_show_setting(int eid, INPUT *input, int argc, char_t **argv)
{
char buf_sec[TMP_LEN], buf_if[TMP_LEN], buf_vif[TMP_LEN];
int if_idx, vif_idx, num;
char *secmode = NULL;
INPUT *tmp;
/* Get physical interface index */
if (ejArgs(argc, argv, "%d %d", &if_idx, &vif_idx) < 2) {
FCGI_LOG("Insufficient args");
return FALSE;
}
num = atoi(nvram_safe_get("wlv_rule_num"));
/* Get security mode rule */
snprintf(buf_if, TMP_LEN, "wl%d_ssid%d_secmode" , if_idx, vif_idx);
if ((tmp = CGI_Find_Parameter(input, buf_if))) {
secmode = tmp->val;
}
if (!secmode || !*secmode) {
snprintf(buf_if, TMP_LEN, "wl%d_sec_rule", if_idx);
ezplib_get_attr_val(buf_if, vif_idx, "secmode", buf_sec,
TMP_LEN, EZPLIB_USE_CLI);
} else{
sprintf(buf_sec, "%s", secmode);
}
/*----------------
buf_sec : security mode
buf_if : interface index
buf_vif : ssid index
-----------------*/
snprintf(buf_if, TMP_LEN, "%d", if_idx);
snprintf(buf_vif, TMP_LEN, "%d", vif_idx);
if (!strcmp(buf_sec, "wep")) {
do_ej("wlv_sec_wep.asp", input, buf_if, buf_vif, "");
} else if (!strcmp(buf_sec, "psk")) {
do_ej("wlv_sec_psk.asp", input, buf_if, buf_vif, "");
} else if (!strcmp(buf_sec, "wpa")) {
do_ej("wlv_sec_wpa.asp", input, buf_if, buf_vif, "");
} else if (!strcmp(buf_sec, "psk2")) {
do_ej("wlv_sec_psk2.asp", input, buf_if, buf_vif, "");
} else if (!strcmp(buf_sec, "wpa2")) {
do_ej("wlv_sec_wpa2.asp", input, buf_if, buf_vif, "");
}
if (appmgr_check("guest_lan") && ( vif_idx == num - 1 )) {
do_ej("guest_lan_setting.asp", input, buf_if, buf_vif, "");
}
return 0;
}
void
do_upgrade_cgi(char *url, webs_t wp, ...)
{
if (upgrade_type == FIRMWARE) { /* FIRMWARE. */
if (upgrade_result == 1) {
refuse_request = 0;
do_ej("resp_upgrade_fail.asp", wp, "");
websDone(wp, 200);
wfflush(wp);
wfclose(wp);
sleep(5);
#if defined(PLATFORM_AXA)
system("ezp-i2c gauge host booting");
#endif
system("ifconfig br0 down");
system("ifconfig ra0 down");
system("ifconfig apcli0 down");
system("ifconfig vlan1 down");
system("ifconfig vlan2 down");
system("ifconfig eth2 down");
reboot(RB_AUTOBOOT);
#if defined(PLATFORM_LIS) || defined(PLATFORM_AXA)
} else if (upgrade_result == 2) {
printf("upgrade_result=2\n");
refuse_request = 0;
do_ej("resp_upgrade_low_power.asp", wp, "");
websDone(wp, 200);
wfflush(wp);
reboot(RB_AUTOBOOT);
#endif
} else {
/* Reboot if successful. */
do_ej("/tmp/resp_upgrade_success.asp", wp, "");
websDone(wp, 200);
/* Seprate reboot from busybox, and put it into tmp */
/* EZP
* It will immediately restart the router. So we can't
* wait the processing finish and close the connection
* socket. */
wfflush(wp);
wfclose(wp);
/* Wait 5 seconds and do reboot directly from the system call. */
#if defined(PLATFORM_AXA)
system("/tmp/ezp-i2c gauge host booting");
#endif
sleep(5);
reboot(RB_AUTOBOOT);
// exit(1);
}
}
else if (upgrade_type == CONFIG) { /* Configuration.*/
if (upgrade_result) {
refuse_request = 0;
do_ej("resp_fail.asp", wp, "");
websDone(wp, 200);
} else {
nvram_commit();
do_ej("resp_reboot_wait.asp", wp, "");
websDone(wp, 200);
/* Seprate reboot from busybox, and put it into tmp */
#if defined(PLATFORM_AXA)
system("ezp-i2c gauge host booting");
#endif
system("reboot");
}
}
else { /* Unknown upgrade type */
refuse_request = 0;
do_ej("resp_unknown_fail.asp", wp, "");
websDone(wp, 200);
}
}
