static struct drm_plane *sti_hqvdp_create(struct drm_device *drm_dev,
struct device *dev, int desc)
{
struct sti_hqvdp *hqvdp = dev_get_drvdata(dev);
int res;
hqvdp->plane.desc = desc;
hqvdp->plane.status = STI_PLANE_DISABLED;
sti_hqvdp_init(hqvdp);
res = drm_universal_plane_init(drm_dev, &hqvdp->plane.drm_plane, 1,
&sti_hqvdp_plane_helpers_funcs,
hqvdp_supported_formats,
ARRAY_SIZE(hqvdp_supported_formats),
DRM_PLANE_TYPE_OVERLAY, NULL);
if (res) {
DRM_ERROR("Failed to initialize universal plane\n");
return NULL;
}
drm_plane_helper_add(&hqvdp->plane.drm_plane, &sti_hqvdp_helpers_funcs);
sti_plane_init_property(&hqvdp->plane, DRM_PLANE_TYPE_OVERLAY);
return &hqvdp->plane.drm_plane;
}
static struct sun4i_layer *sun4i_layer_init_one(struct drm_device *drm,
enum drm_plane_type type)
{
struct sun4i_drv *drv = drm->dev_private;
struct sun4i_layer *layer;
int ret;
layer = devm_kzalloc(drm->dev, sizeof(*layer), GFP_KERNEL);
if (!layer)
return ERR_PTR(-ENOMEM);
ret = drm_universal_plane_init(drm, &layer->plane, BIT(0),
&sun4i_backend_layer_funcs,
sun4i_backend_layer_formats,
ARRAY_SIZE(sun4i_backend_layer_formats),
type,
NULL);
if (ret) {
dev_err(drm->dev, "Couldn't initialize layer\n");
return ERR_PTR(ret);
}
drm_plane_helper_add(&layer->plane,
&sun4i_backend_layer_helper_funcs);
layer->drv = drv;
if (type == DRM_PLANE_TYPE_PRIMARY)
drv->primary = &layer->plane;
return layer;
}
struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev)
{
struct drm_plane *primary;
int ret;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (!primary) {
DRM_DEBUG_KMS("Failed to allocate primary plane\n");
return NULL;
}
/* possible_crtc's will be filled in later by crtc_init */
ret = drm_universal_plane_init(dev, primary, 0,
&fsl_dcu_drm_plane_funcs,
fsl_dcu_drm_plane_formats,
ARRAY_SIZE(fsl_dcu_drm_plane_formats),
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
kfree(primary);
primary = NULL;
}
drm_plane_helper_add(primary, &fsl_dcu_drm_plane_helper_funcs);
return primary;
}
static struct drm_plane *hdlcd_plane_init(struct drm_device *drm)
{
struct hdlcd_drm_private *hdlcd = drm->dev_private;
struct drm_plane *plane = NULL;
u32 formats[ARRAY_SIZE(supported_formats)], i;
int ret;
plane = devm_kzalloc(drm->dev, sizeof(*plane), GFP_KERNEL);
if (!plane)
return ERR_PTR(-ENOMEM);
for (i = 0; i < ARRAY_SIZE(supported_formats); i++)
formats[i] = supported_formats[i].fourcc;
ret = drm_universal_plane_init(drm, plane, 0xff, &hdlcd_plane_funcs,
formats, ARRAY_SIZE(formats),
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
return ERR_PTR(ret);
}
drm_plane_helper_add(plane, &hdlcd_plane_helper_funcs);
hdlcd->plane = plane;
return plane;
}
struct drm_plane *virtio_gpu_plane_init(struct virtio_gpu_device *vgdev,
int index)
{
struct drm_device *dev = vgdev->ddev;
struct drm_plane *plane;
int ret;
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
if (!plane)
return ERR_PTR(-ENOMEM);
ret = drm_universal_plane_init(dev, plane, 1 << index,
&virtio_gpu_plane_funcs,
virtio_gpu_formats,
ARRAY_SIZE(virtio_gpu_formats),
DRM_PLANE_TYPE_PRIMARY);
if (ret)
goto err_plane_init;
drm_plane_helper_add(plane, &virtio_gpu_plane_helper_funcs);
return plane;
err_plane_init:
kfree(plane);
return ERR_PTR(ret);
}
static struct sun4i_layer *sun4i_layer_init_one(struct drm_device *drm,
struct sun4i_backend *backend,
const struct sun4i_plane_desc *plane)
{
struct sun4i_layer *layer;
int ret;
layer = devm_kzalloc(drm->dev, sizeof(*layer), GFP_KERNEL);
if (!layer)
return ERR_PTR(-ENOMEM);
/* possible crtcs are set later */
ret = drm_universal_plane_init(drm, &layer->plane, 0,
&sun4i_backend_layer_funcs,
plane->formats, plane->nformats,
plane->type, NULL);
if (ret) {
dev_err(drm->dev, "Couldn't initialize layer\n");
return ERR_PTR(ret);
}
drm_plane_helper_add(&layer->plane,
&sun4i_backend_layer_helper_funcs);
layer->backend = backend;
return layer;
}
/**
* drm_plane_init - Initialize a legacy plane
* @dev: DRM device
* @plane: plane object to init
* @possible_crtcs: bitmask of possible CRTCs
* @funcs: callbacks for the new plane
* @formats: array of supported formats (DRM_FORMAT\_\*)
* @format_count: number of elements in @formats
* @is_primary: plane type (primary vs overlay)
*
* Legacy API to initialize a DRM plane.
*
* New drivers should call drm_universal_plane_init() instead.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
uint32_t possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
bool is_primary)
{
enum drm_plane_type type;
type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
return drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
formats, format_count, type, NULL);
}
/* initialize plane */
struct drm_plane *omap_plane_init(struct drm_device *dev,
int idx, enum drm_plane_type type,
u32 possible_crtcs)
{
struct omap_drm_private *priv = dev->dev_private;
unsigned int num_planes = priv->dispc_ops->get_num_ovls(priv->dispc);
struct drm_plane *plane;
struct omap_plane *omap_plane;
enum omap_plane_id id;
int ret;
u32 nformats;
const u32 *formats;
if (WARN_ON(idx >= ARRAY_SIZE(plane_idx_to_id)))
return ERR_PTR(-EINVAL);
id = plane_idx_to_id[idx];
DBG("%s: type=%d", plane_id_to_name[id], type);
omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL);
if (!omap_plane)
return ERR_PTR(-ENOMEM);
formats = priv->dispc_ops->ovl_get_color_modes(priv->dispc, id);
for (nformats = 0; formats[nformats]; ++nformats)
;
omap_plane->id = id;
omap_plane->name = plane_id_to_name[id];
plane = &omap_plane->base;
ret = drm_universal_plane_init(dev, plane, possible_crtcs,
&omap_plane_funcs, formats,
nformats, NULL, type, NULL);
if (ret < 0)
goto error;
drm_plane_helper_add(plane, &omap_plane_helper_funcs);
omap_plane_install_properties(plane, &plane->base);
drm_plane_create_zpos_property(plane, 0, 0, num_planes - 1);
return plane;
error:
dev_err(dev->dev, "%s(): could not create plane: %s\n",
__func__, plane_id_to_name[id]);
kfree(omap_plane);
return NULL;
}
int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
unsigned long possible_crtcs, enum drm_plane_type type)
{
int err;
err = drm_universal_plane_init(dev, plane, possible_crtcs,
&mtk_plane_funcs, formats,
ARRAY_SIZE(formats), NULL, type, NULL);
if (err) {
DRM_ERROR("failed to initialize plane\n");
return err;
}
drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
return 0;
}
/* initialize plane */
struct drm_plane *mdp5_plane_init(struct drm_device *dev,
enum mdp5_pipe pipe, bool private_plane, uint32_t reg_offset)
{
struct drm_plane *plane = NULL;
struct mdp5_plane *mdp5_plane;
int ret;
enum drm_plane_type type;
mdp5_plane = kzalloc(sizeof(*mdp5_plane), GFP_KERNEL);
if (!mdp5_plane) {
ret = -ENOMEM;
goto fail;
}
plane = &mdp5_plane->base;
mdp5_plane->pipe = pipe;
mdp5_plane->name = pipe2name(pipe);
mdp5_plane->nformats = mdp5_get_formats(pipe, mdp5_plane->formats,
ARRAY_SIZE(mdp5_plane->formats));
mdp5_plane->flush_mask = mdp_ctl_flush_mask_pipe(pipe);
mdp5_plane->reg_offset = reg_offset;
spin_lock_init(&mdp5_plane->pipe_lock);
type = private_plane ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
ret = drm_universal_plane_init(dev, plane, 0xff, &mdp5_plane_funcs,
mdp5_plane->formats, mdp5_plane->nformats,
type);
if (ret)
goto fail;
drm_plane_helper_add(plane, &mdp5_plane_helper_funcs);
mdp5_plane_install_properties(plane, &plane->base);
return plane;
fail:
if (plane)
mdp5_plane_destroy(plane);
return ERR_PTR(ret);
}
/* initialize plane */
struct drm_plane *mdp4_plane_init(struct drm_device *dev,
enum mdp4_pipe pipe_id, bool private_plane)
{
struct drm_plane *plane = NULL;
struct mdp4_plane *mdp4_plane;
int ret;
enum drm_plane_type type;
mdp4_plane = kzalloc(sizeof(*mdp4_plane), GFP_KERNEL);
if (!mdp4_plane) {
ret = -ENOMEM;
goto fail;
}
plane = &mdp4_plane->base;
mdp4_plane->pipe = pipe_id;
mdp4_plane->name = pipe_names[pipe_id];
mdp4_plane->caps = mdp4_pipe_caps(pipe_id);
mdp4_plane->nformats = mdp_get_formats(mdp4_plane->formats,
ARRAY_SIZE(mdp4_plane->formats),
!pipe_supports_yuv(mdp4_plane->caps));
type = private_plane ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
ret = drm_universal_plane_init(dev, plane, 0xff, &mdp4_plane_funcs,
mdp4_plane->formats, mdp4_plane->nformats,
type, NULL);
if (ret)
goto fail;
drm_plane_helper_add(plane, &mdp4_plane_helper_funcs);
mdp4_plane_install_properties(plane, &plane->base);
return plane;
fail:
if (plane)
mdp4_plane_destroy(plane);
return ERR_PTR(ret);
}
/**
* drm_simple_display_pipe_init - Initialize a simple display pipeline
* @dev: DRM device
* @pipe: simple display pipe object to initialize
* @funcs: callbacks for the display pipe (optional)
* @formats: array of supported formats (DRM_FORMAT\_\*)
* @format_count: number of elements in @formats
* @format_modifiers: array of formats modifiers
* @connector: connector to attach and register (optional)
*
* Sets up a display pipeline which consist of a really simple
* plane-crtc-encoder pipe.
*
* If a connector is supplied, the pipe will be coupled with the provided
* connector. You may supply a NULL connector when using drm bridges, that
* handle connectors themselves (see drm_simple_display_pipe_attach_bridge()).
*
* Teardown of a simple display pipe is all handled automatically by the drm
* core through calling drm_mode_config_cleanup(). Drivers afterwards need to
* release the memory for the structure themselves.
*
* Returns:
* Zero on success, negative error code on failure.
*/
int drm_simple_display_pipe_init(struct drm_device *dev,
struct drm_simple_display_pipe *pipe,
const struct drm_simple_display_pipe_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
const uint64_t *format_modifiers,
struct drm_connector *connector)
{
struct drm_encoder *encoder = &pipe->encoder;
struct drm_plane *plane = &pipe->plane;
struct drm_crtc *crtc = &pipe->crtc;
int ret;
pipe->connector = connector;
pipe->funcs = funcs;
drm_plane_helper_add(plane, &drm_simple_kms_plane_helper_funcs);
ret = drm_universal_plane_init(dev, plane, 0,
&drm_simple_kms_plane_funcs,
formats, format_count,
format_modifiers,
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret)
return ret;
drm_crtc_helper_add(crtc, &drm_simple_kms_crtc_helper_funcs);
ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
&drm_simple_kms_crtc_funcs, NULL);
if (ret)
return ret;
encoder->possible_crtcs = drm_crtc_mask(crtc);
ret = drm_encoder_init(dev, encoder, &drm_simple_kms_encoder_funcs,
DRM_MODE_ENCODER_NONE, NULL);
if (ret || !connector)
return ret;
return drm_connector_attach_encoder(connector, encoder);
}
static int ade_plane_init(struct drm_device *dev, struct ade_plane *aplane,
enum drm_plane_type type)
{
const u32 *fmts;
u32 fmts_cnt;
int ret = 0;
/* get properties */
fmts_cnt = ade_get_channel_formats(aplane->ch, &fmts);
if (ret)
return ret;
ret = drm_universal_plane_init(dev, &aplane->base, 1, &ade_plane_funcs,
fmts, fmts_cnt, type, NULL);
if (ret) {
DRM_ERROR("fail to init plane, ch=%d\n", aplane->ch);
return ret;
}
drm_plane_helper_add(&aplane->base, &ade_plane_helper_funcs);
return 0;
}
struct drm_plane *vkms_plane_init(struct vkms_device *vkmsdev,
enum drm_plane_type type)
{
struct drm_device *dev = &vkmsdev->drm;
const struct drm_plane_helper_funcs *funcs;
struct drm_plane *plane;
const u32 *formats;
int ret, nformats;
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
if (!plane)
return ERR_PTR(-ENOMEM);
if (type == DRM_PLANE_TYPE_CURSOR) {
formats = vkms_cursor_formats;
nformats = ARRAY_SIZE(vkms_cursor_formats);
funcs = &vkms_primary_helper_funcs;
} else {
formats = vkms_formats;
nformats = ARRAY_SIZE(vkms_formats);
funcs = &vkms_primary_helper_funcs;
}
ret = drm_universal_plane_init(dev, plane, 0,
&vkms_plane_funcs,
formats, nformats,
NULL, type, NULL);
if (ret) {
kfree(plane);
return ERR_PTR(ret);
}
drm_plane_helper_add(plane, funcs);
return plane;
}
/**
* drm_primary_helper_update() - Helper for primary plane update
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
* @fb: framebuffer to flip onto plane
* @crtc_x: x offset of primary plane on crtc
* @crtc_y: y offset of primary plane on crtc
* @crtc_w: width of primary plane rectangle on crtc
* @crtc_h: height of primary plane rectangle on crtc
* @src_x: x offset of @fb for panning
* @src_y: y offset of @fb for panning
* @src_w: width of source rectangle in @fb
* @src_h: height of source rectangle in @fb
*
* Provides a default plane update handler for primary planes. This is handler
* is called in response to a userspace SetPlane operation on the plane with a
* non-NULL framebuffer. We call the driver's modeset handler to update the
* framebuffer.
*
* SetPlane() on a primary plane of a disabled CRTC is not supported, and will
* return an error.
*
* Note that we make some assumptions about hardware limitations that may not be
* true for all hardware --
*
* 1. Primary plane cannot be repositioned.
* 2. Primary plane cannot be scaled.
* 3. Primary plane must cover the entire CRTC.
* 4. Subpixel positioning is not supported.
*
* Drivers for hardware that don't have these restrictions can provide their
* own implementation rather than using this helper.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_mode_set set = {
.crtc = crtc,
.fb = fb,
.mode = &crtc->mode,
.x = src_x >> 16,
.y = src_y >> 16,
};
struct drm_rect src = {
.x1 = src_x,
.y1 = src_y,
.x2 = src_x + src_w,
.y2 = src_y + src_h,
};
struct drm_rect dest = {
.x1 = crtc_x,
.y1 = crtc_y,
.x2 = crtc_x + crtc_w,
.y2 = crtc_y + crtc_h,
};
const struct drm_rect clip = {
.x2 = crtc->mode.hdisplay,
.y2 = crtc->mode.vdisplay,
};
struct drm_connector **connector_list;
int num_connectors, ret;
bool visible;
ret = drm_plane_helper_check_update(plane, crtc, fb,
&src, &dest, &clip,
BIT(DRM_ROTATE_0),
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
false, false, &visible);
if (ret)
return ret;
if (!visible)
/*
* Primary plane isn't visible. Note that unless a driver
* provides their own disable function, this will just
* wind up returning -EINVAL to userspace.
*/
return plane->funcs->disable_plane(plane);
/* Find current connectors for CRTC */
num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
BUG_ON(num_connectors == 0);
connector_list = kzalloc(num_connectors * sizeof(*connector_list),
GFP_KERNEL);
if (!connector_list)
return -ENOMEM;
get_connectors_for_crtc(crtc, connector_list, num_connectors);
set.connectors = connector_list;
set.num_connectors = num_connectors;
/*
* We call set_config() directly here rather than using
* drm_mode_set_config_internal. We're reprogramming the same
* connectors that were already in use, so we shouldn't need the extra
* cross-CRTC fb refcounting to accomodate stealing connectors.
* drm_mode_setplane() already handles the basic refcounting for the
* framebuffers involved in this operation.
*/
ret = crtc->funcs->set_config(&set);
kfree(connector_list);
return ret;
}
EXPORT_SYMBOL(drm_primary_helper_update);
/**
* drm_primary_helper_disable() - Helper for primary plane disable
* @plane: plane to disable
*
* Provides a default plane disable handler for primary planes. This is handler
* is called in response to a userspace SetPlane operation on the plane with a
* NULL framebuffer parameter. It unconditionally fails the disable call with
* -EINVAL the only way to disable the primary plane without driver support is
* to disable the entier CRTC. Which does not match the plane ->disable hook.
*
* Note that some hardware may be able to disable the primary plane without
* disabling the whole CRTC. Drivers for such hardware should provide their
* own disable handler that disables just the primary plane (and they'll likely
* need to provide their own update handler as well to properly re-enable a
* disabled primary plane).
*
* RETURNS:
* Unconditionally returns -EINVAL.
*/
int drm_primary_helper_disable(struct drm_plane *plane)
{
return -EINVAL;
}
EXPORT_SYMBOL(drm_primary_helper_disable);
/**
* drm_primary_helper_destroy() - Helper for primary plane destruction
* @plane: plane to destroy
*
* Provides a default plane destroy handler for primary planes. This handler
* is called during CRTC destruction. We disable the primary plane, remove
* it from the DRM plane list, and deallocate the plane structure.
*/
void drm_primary_helper_destroy(struct drm_plane *plane)
{
drm_plane_cleanup(plane);
kfree(plane);
}
EXPORT_SYMBOL(drm_primary_helper_destroy);
const struct drm_plane_funcs drm_primary_helper_funcs = {
.update_plane = drm_primary_helper_update,
.disable_plane = drm_primary_helper_disable,
.destroy = drm_primary_helper_destroy,
};
EXPORT_SYMBOL(drm_primary_helper_funcs);
static struct drm_plane *create_primary_plane(struct drm_device *dev)
{
struct drm_plane *primary;
int ret;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (primary == NULL) {
DRM_DEBUG_KMS("Failed to allocate primary plane\n");
return NULL;
}
/*
* Remove the format_default field from drm_plane when dropping
* this helper.
*/
primary->format_default = true;
/* possible_crtc's will be filled in later by crtc_init */
ret = drm_universal_plane_init(dev, primary, 0,
&drm_primary_helper_funcs,
safe_modeset_formats,
ARRAY_SIZE(safe_modeset_formats),
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
kfree(primary);
primary = NULL;
}
return primary;
}
/**
* drm_crtc_init - Legacy CRTC initialization function
* @dev: DRM device
* @crtc: CRTC object to init
* @funcs: callbacks for the new CRTC
*
* Initialize a CRTC object with a default helper-provided primary plane and no
* cursor plane.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
const struct drm_crtc_funcs *funcs)
{
struct drm_plane *primary;
primary = create_primary_plane(dev);
return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs,
NULL);
}
EXPORT_SYMBOL(drm_crtc_init);
int drm_plane_helper_commit(struct drm_plane *plane,
struct drm_plane_state *plane_state,
struct drm_framebuffer *old_fb)
{
const struct drm_plane_helper_funcs *plane_funcs;
struct drm_crtc *crtc[2];
const struct drm_crtc_helper_funcs *crtc_funcs[2];
int i, ret = 0;
plane_funcs = plane->helper_private;
/* Since this is a transitional helper we can't assume that plane->state
* is always valid. Hence we need to use plane->crtc instead of
* plane->state->crtc as the old crtc. */
crtc[0] = plane->crtc;
crtc[1] = crtc[0] != plane_state->crtc ? plane_state->crtc : NULL;
for (i = 0; i < 2; i++)
crtc_funcs[i] = crtc[i] ? crtc[i]->helper_private : NULL;
if (plane_funcs->atomic_check) {
ret = plane_funcs->atomic_check(plane, plane_state);
if (ret)
goto out;
}
if (plane_funcs->prepare_fb && plane_state->fb &&
plane_state->fb != old_fb) {
ret = plane_funcs->prepare_fb(plane,
plane_state);
if (ret)
goto out;
}
/* Point of no return, commit sw state. */
swap(plane->state, plane_state);
for (i = 0; i < 2; i++) {
if (crtc_funcs[i] && crtc_funcs[i]->atomic_begin)
crtc_funcs[i]->atomic_begin(crtc[i], crtc[i]->state);
}
/*
* Drivers may optionally implement the ->atomic_disable callback, so
* special-case that here.
*/
if (drm_atomic_plane_disabling(plane, plane_state) &&
plane_funcs->atomic_disable)
plane_funcs->atomic_disable(plane, plane_state);
else
plane_funcs->atomic_update(plane, plane_state);
for (i = 0; i < 2; i++) {
if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush)
crtc_funcs[i]->atomic_flush(crtc[i], crtc[i]->state);
}
/*
* If we only moved the plane and didn't change fb's, there's no need to
* wait for vblank.
*/
if (plane->state->fb == old_fb)
goto out;
for (i = 0; i < 2; i++) {
if (!crtc[i])
continue;
if (crtc[i]->cursor == plane)
continue;
/* There's no other way to figure out whether the crtc is running. */
ret = drm_crtc_vblank_get(crtc[i]);
if (ret == 0) {
drm_crtc_wait_one_vblank(crtc[i]);
drm_crtc_vblank_put(crtc[i]);
}
ret = 0;
}
if (plane_funcs->cleanup_fb)
plane_funcs->cleanup_fb(plane, plane_state);
out:
if (plane_state) {
if (plane->funcs->atomic_destroy_state)
plane->funcs->atomic_destroy_state(plane, plane_state);
else
drm_atomic_helper_plane_destroy_state(plane, plane_state);
}
return ret;
}
/**
* drm_plane_helper_update() - Transitional helper for plane update
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
* @fb: framebuffer to flip onto plane
* @crtc_x: x offset of primary plane on crtc
* @crtc_y: y offset of primary plane on crtc
* @crtc_w: width of primary plane rectangle on crtc
* @crtc_h: height of primary plane rectangle on crtc
* @src_x: x offset of @fb for panning
* @src_y: y offset of @fb for panning
* @src_w: width of source rectangle in @fb
* @src_h: height of source rectangle in @fb
*
* Provides a default plane update handler using the atomic plane update
* functions. It is fully left to the driver to check plane constraints and
* handle corner-cases like a fully occluded or otherwise invisible plane.
*
* This is useful for piecewise transitioning of a driver to the atomic helpers.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_plane_state *plane_state;
if (plane->funcs->atomic_duplicate_state)
plane_state = plane->funcs->atomic_duplicate_state(plane);
else {
if (!plane->state)
drm_atomic_helper_plane_reset(plane);
plane_state = drm_atomic_helper_plane_duplicate_state(plane);
}
if (!plane_state)
return -ENOMEM;
plane_state->plane = plane;
plane_state->crtc = crtc;
drm_atomic_set_fb_for_plane(plane_state, fb);
plane_state->crtc_x = crtc_x;
plane_state->crtc_y = crtc_y;
plane_state->crtc_h = crtc_h;
plane_state->crtc_w = crtc_w;
plane_state->src_x = src_x;
plane_state->src_y = src_y;
plane_state->src_h = src_h;
plane_state->src_w = src_w;
return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_update);
/**
* drm_plane_helper_disable() - Transitional helper for plane disable
* @plane: plane to disable
*
* Provides a default plane disable handler using the atomic plane update
* functions. It is fully left to the driver to check plane constraints and
* handle corner-cases like a fully occluded or otherwise invisible plane.
*
* This is useful for piecewise transitioning of a driver to the atomic helpers.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_plane_helper_disable(struct drm_plane *plane)
{
struct drm_plane_state *plane_state;
/* crtc helpers love to call disable functions for already disabled hw
* functions. So cope with that. */
if (!plane->crtc)
return 0;
if (plane->funcs->atomic_duplicate_state)
plane_state = plane->funcs->atomic_duplicate_state(plane);
else {
if (!plane->state)
drm_atomic_helper_plane_reset(plane);
plane_state = drm_atomic_helper_plane_duplicate_state(plane);
}
if (!plane_state)
return -ENOMEM;
plane_state->plane = plane;
plane_state->crtc = NULL;
drm_atomic_set_fb_for_plane(plane_state, NULL);
return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_disable);
/* create a plane */
static struct xilinx_drm_plane *
xilinx_drm_plane_create(struct xilinx_drm_plane_manager *manager,
unsigned int possible_crtcs, bool primary)
{
struct xilinx_drm_plane *plane;
struct device *dev = manager->drm->dev;
char name[16];
struct device_node *plane_node;
struct device_node *sub_node;
enum drm_plane_type type;
uint32_t fmt_in = -1;
uint32_t fmt_out = -1;
const char *fmt;
int i;
int ret;
for (i = 0; i < manager->num_planes; i++)
if (!manager->planes[i])
break;
if (i >= manager->num_planes) {
DRM_ERROR("failed to allocate plane\n");
return ERR_PTR(-ENODEV);
}
snprintf(name, sizeof(name), "plane%d", i);
plane_node = of_get_child_by_name(manager->node, name);
if (!plane_node) {
DRM_ERROR("failed to find a plane node\n");
return ERR_PTR(-ENODEV);
}
plane = devm_kzalloc(dev, sizeof(*plane), GFP_KERNEL);
if (!plane) {
ret = -ENOMEM;
goto err_out;
}
plane->primary = primary;
plane->id = i;
plane->prio = i;
plane->zpos = i;
plane->alpha = manager->default_alpha;
plane->dpms = DRM_MODE_DPMS_OFF;
plane->format = -1;
DRM_DEBUG_KMS("plane->id: %d\n", plane->id);
for (i = 0; i < MAX_NUM_SUB_PLANES; i++) {
snprintf(name, sizeof(name), "dma%d", i);
plane->dma[i].chan = of_dma_request_slave_channel(plane_node,
name);
if (PTR_ERR(plane->dma[i].chan) == -ENODEV) {
plane->dma[i].chan = NULL;
continue;
}
if (IS_ERR(plane->dma[i].chan)) {
DRM_ERROR("failed to request dma channel\n");
ret = PTR_ERR(plane->dma[i].chan);
plane->dma[i].chan = NULL;
goto err_dma;
}
}
/* probe color space converter */
sub_node = of_parse_phandle(plane_node, "xlnx,rgb2yuv", i);
if (sub_node) {
plane->rgb2yuv = xilinx_rgb2yuv_probe(dev, sub_node);
of_node_put(sub_node);
if (IS_ERR(plane->rgb2yuv)) {
DRM_ERROR("failed to probe a rgb2yuv\n");
ret = PTR_ERR(plane->rgb2yuv);
goto err_dma;
}
/* rgb2yuv input format */
plane->format = DRM_FORMAT_XRGB8888;
/* rgb2yuv output format */
fmt_out = DRM_FORMAT_YUV444;
}
/* probe chroma resampler */
sub_node = of_parse_phandle(plane_node, "xlnx,cresample", i);
if (sub_node) {
plane->cresample = xilinx_cresample_probe(dev, sub_node);
of_node_put(sub_node);
if (IS_ERR(plane->cresample)) {
DRM_ERROR("failed to probe a cresample\n");
ret = PTR_ERR(plane->cresample);
goto err_dma;
}
/* cresample input format */
fmt = xilinx_cresample_get_input_format_name(plane->cresample);
ret = xilinx_drm_format_by_name(fmt, &fmt_in);
if (ret)
goto err_dma;
/* format sanity check */
if ((fmt_out != -1) && (fmt_out != fmt_in)) {
DRM_ERROR("input/output format mismatch\n");
ret = -EINVAL;
goto err_dma;
}
if (plane->format == -1)
plane->format = fmt_in;
/* cresample output format */
fmt = xilinx_cresample_get_output_format_name(plane->cresample);
ret = xilinx_drm_format_by_name(fmt, &fmt_out);
if (ret)
goto err_dma;
}
/* create an OSD layer when OSD is available */
if (manager->osd) {
/* format sanity check */
if ((fmt_out != -1) && (fmt_out != manager->format)) {
DRM_ERROR("input/output format mismatch\n");
ret = -EINVAL;
goto err_dma;
}
/* create an osd layer */
plane->osd_layer = xilinx_osd_layer_get(manager->osd);
if (IS_ERR(plane->osd_layer)) {
DRM_ERROR("failed to create a osd layer\n");
ret = PTR_ERR(plane->osd_layer);
plane->osd_layer = NULL;
goto err_dma;
}
if (plane->format == -1)
plane->format = manager->format;
}
if (manager->dp_sub) {
plane->dp_layer = xilinx_drm_dp_sub_layer_get(manager->dp_sub,
primary);
if (IS_ERR(plane->dp_layer)) {
DRM_ERROR("failed to create a dp_sub layer\n");
ret = PTR_ERR(plane->dp_layer);
plane->dp_layer = NULL;
goto err_dma;
}
if (primary) {
ret = xilinx_drm_dp_sub_layer_set_fmt(manager->dp_sub,
plane->dp_layer,
manager->format);
if (ret) {
DRM_ERROR("failed to set dp_sub layer fmt\n");
goto err_dma;
}
}
plane->format =
xilinx_drm_dp_sub_layer_get_fmt(manager->dp_sub,
plane->dp_layer);
}
/* If there's no IP other than VDMA, pick the manager's format */
if (plane->format == -1)
plane->format = manager->format;
/* initialize drm plane */
type = primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
ret = drm_universal_plane_init(manager->drm, &plane->base,
possible_crtcs, &xilinx_drm_plane_funcs,
&plane->format, 1, type, NULL);
if (ret) {
DRM_ERROR("failed to initialize plane\n");
goto err_init;
}
plane->manager = manager;
manager->planes[plane->id] = plane;
xilinx_drm_plane_attach_property(&plane->base);
of_node_put(plane_node);
return plane;
err_init:
if (manager->dp_sub) {
xilinx_drm_dp_sub_layer_disable(manager->dp_sub,
plane->dp_layer);
xilinx_drm_dp_sub_layer_put(plane->manager->dp_sub,
plane->dp_layer);
}
if (manager->osd) {
xilinx_osd_layer_disable(plane->osd_layer);
xilinx_osd_layer_put(plane->osd_layer);
}
err_dma:
for (i = 0; i < MAX_NUM_SUB_PLANES; i++)
if (plane->dma[i].chan)
dma_release_channel(plane->dma[i].chan);
err_out:
of_node_put(plane_node);
return ERR_PTR(ret);
}
/**
* drm_primary_helper_update() - Helper for primary plane update
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
* @fb: framebuffer to flip onto plane
* @crtc_x: x offset of primary plane on crtc
* @crtc_y: y offset of primary plane on crtc
* @crtc_w: width of primary plane rectangle on crtc
* @crtc_h: height of primary plane rectangle on crtc
* @src_x: x offset of @fb for panning
* @src_y: y offset of @fb for panning
* @src_w: width of source rectangle in @fb
* @src_h: height of source rectangle in @fb
*
* Provides a default plane update handler for primary planes. This is handler
* is called in response to a userspace SetPlane operation on the plane with a
* non-NULL framebuffer. We call the driver's modeset handler to update the
* framebuffer.
*
* SetPlane() on a primary plane of a disabled CRTC is not supported, and will
* return an error.
*
* Note that we make some assumptions about hardware limitations that may not be
* true for all hardware --
* 1) Primary plane cannot be repositioned.
* 2) Primary plane cannot be scaled.
* 3) Primary plane must cover the entire CRTC.
* 4) Subpixel positioning is not supported.
* Drivers for hardware that don't have these restrictions can provide their
* own implementation rather than using this helper.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_mode_set set = {
.crtc = crtc,
.fb = fb,
.mode = &crtc->mode,
.x = src_x >> 16,
.y = src_y >> 16,
};
struct drm_rect src = {
.x1 = src_x,
.y1 = src_y,
.x2 = src_x + src_w,
.y2 = src_y + src_h,
};
struct drm_rect dest = {
.x1 = crtc_x,
.y1 = crtc_y,
.x2 = crtc_x + crtc_w,
.y2 = crtc_y + crtc_h,
};
const struct drm_rect clip = {
.x2 = crtc->mode.hdisplay,
.y2 = crtc->mode.vdisplay,
};
struct drm_connector **connector_list;
struct drm_framebuffer *tmpfb;
int num_connectors, ret;
bool visible;
ret = drm_plane_helper_check_update(plane, crtc, fb,
&src, &dest, &clip,
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
false, false, &visible);
if (ret)
return ret;
if (!visible)
/*
* Primary plane isn't visible. Note that unless a driver
* provides their own disable function, this will just
* wind up returning -EINVAL to userspace.
*/
return plane->funcs->disable_plane(plane);
/* Find current connectors for CRTC */
num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
BUG_ON(num_connectors == 0);
connector_list = kzalloc(num_connectors * sizeof(*connector_list),
GFP_KERNEL);
if (!connector_list)
return -ENOMEM;
get_connectors_for_crtc(crtc, connector_list, num_connectors);
set.connectors = connector_list;
set.num_connectors = num_connectors;
/*
* set_config() adjusts crtc->primary->fb; however the DRM setplane
* code that called us expects to handle the framebuffer update and
* reference counting; save and restore the current fb before
* calling it.
*
* N.B., we call set_config() directly here rather than using
* drm_mode_set_config_internal. We're reprogramming the same
* connectors that were already in use, so we shouldn't need the extra
* cross-CRTC fb refcounting to accomodate stealing connectors.
* drm_mode_setplane() already handles the basic refcounting for the
* framebuffers involved in this operation.
*/
tmpfb = plane->fb;
ret = crtc->funcs->set_config(&set);
plane->fb = tmpfb;
kfree(connector_list);
return ret;
}
EXPORT_SYMBOL(drm_primary_helper_update);
/**
* drm_primary_helper_disable() - Helper for primary plane disable
* @plane: plane to disable
*
* Provides a default plane disable handler for primary planes. This is handler
* is called in response to a userspace SetPlane operation on the plane with a
* NULL framebuffer parameter. It unconditionally fails the disable call with
* -EINVAL the only way to disable the primary plane without driver support is
* to disable the entier CRTC. Which does not match the plane ->disable hook.
*
* Note that some hardware may be able to disable the primary plane without
* disabling the whole CRTC. Drivers for such hardware should provide their
* own disable handler that disables just the primary plane (and they'll likely
* need to provide their own update handler as well to properly re-enable a
* disabled primary plane).
*
* RETURNS:
* Unconditionally returns -EINVAL.
*/
int drm_primary_helper_disable(struct drm_plane *plane)
{
return -EINVAL;
}
EXPORT_SYMBOL(drm_primary_helper_disable);
/**
* drm_primary_helper_destroy() - Helper for primary plane destruction
* @plane: plane to destroy
*
* Provides a default plane destroy handler for primary planes. This handler
* is called during CRTC destruction. We disable the primary plane, remove
* it from the DRM plane list, and deallocate the plane structure.
*/
void drm_primary_helper_destroy(struct drm_plane *plane)
{
drm_plane_cleanup(plane);
kfree(plane);
}
EXPORT_SYMBOL(drm_primary_helper_destroy);
const struct drm_plane_funcs drm_primary_helper_funcs = {
.update_plane = drm_primary_helper_update,
.disable_plane = drm_primary_helper_disable,
.destroy = drm_primary_helper_destroy,
};
EXPORT_SYMBOL(drm_primary_helper_funcs);
/**
* drm_primary_helper_create_plane() - Create a generic primary plane
* @dev: drm device
* @formats: pixel formats supported, or NULL for a default safe list
* @num_formats: size of @formats; ignored if @formats is NULL
*
* Allocates and initializes a primary plane that can be used with the primary
* plane helpers. Drivers that wish to use driver-specific plane structures or
* provide custom handler functions may perform their own allocation and
* initialization rather than calling this function.
*/
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
const uint32_t *formats,
int num_formats)
{
struct drm_plane *primary;
int ret;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (primary == NULL) {
DRM_DEBUG_KMS("Failed to allocate primary plane\n");
return NULL;
}
if (formats == NULL) {
formats = safe_modeset_formats;
num_formats = ARRAY_SIZE(safe_modeset_formats);
}
/* possible_crtc's will be filled in later by crtc_init */
ret = drm_universal_plane_init(dev, primary, 0,
&drm_primary_helper_funcs,
formats, num_formats,
DRM_PLANE_TYPE_PRIMARY);
if (ret) {
kfree(primary);
primary = NULL;
}
return primary;
}
EXPORT_SYMBOL(drm_primary_helper_create_plane);
/**
* drm_crtc_init - Legacy CRTC initialization function
* @dev: DRM device
* @crtc: CRTC object to init
* @funcs: callbacks for the new CRTC
*
* Initialize a CRTC object with a default helper-provided primary plane and no
* cursor plane.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
const struct drm_crtc_funcs *funcs)
{
struct drm_plane *primary;
primary = drm_primary_helper_create_plane(dev, NULL, 0);
return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs);
}
EXPORT_SYMBOL(drm_crtc_init);
static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
{
struct vmw_screen_object_unit *sou;
struct drm_device *dev = dev_priv->dev;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_plane *primary, *cursor;
struct drm_crtc *crtc;
int ret;
sou = kzalloc(sizeof(*sou), GFP_KERNEL);
if (!sou)
return -ENOMEM;
sou->base.unit = unit;
crtc = &sou->base.crtc;
encoder = &sou->base.encoder;
connector = &sou->base.connector;
primary = &sou->base.primary;
cursor = &sou->base.cursor;
sou->base.active_implicit = false;
sou->base.pref_active = (unit == 0);
sou->base.pref_width = dev_priv->initial_width;
sou->base.pref_height = dev_priv->initial_height;
sou->base.pref_mode = NULL;
/*
* Remove this after enabling atomic because property values can
* only exist in a state object
*/
sou->base.is_implicit = false;
/* Initialize primary plane */
vmw_du_plane_reset(primary);
ret = drm_universal_plane_init(dev, &sou->base.primary,
0, &vmw_sou_plane_funcs,
vmw_primary_plane_formats,
ARRAY_SIZE(vmw_primary_plane_formats),
NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
DRM_ERROR("Failed to initialize primary plane");
goto err_free;
}
drm_plane_helper_add(primary, &vmw_sou_primary_plane_helper_funcs);
/* Initialize cursor plane */
vmw_du_plane_reset(cursor);
ret = drm_universal_plane_init(dev, &sou->base.cursor,
0, &vmw_sou_cursor_funcs,
vmw_cursor_plane_formats,
ARRAY_SIZE(vmw_cursor_plane_formats),
NULL, DRM_PLANE_TYPE_CURSOR, NULL);
if (ret) {
DRM_ERROR("Failed to initialize cursor plane");
drm_plane_cleanup(&sou->base.primary);
goto err_free;
}
drm_plane_helper_add(cursor, &vmw_sou_cursor_plane_helper_funcs);
vmw_du_connector_reset(connector);
ret = drm_connector_init(dev, connector, &vmw_sou_connector_funcs,
DRM_MODE_CONNECTOR_VIRTUAL);
if (ret) {
DRM_ERROR("Failed to initialize connector\n");
goto err_free;
}
drm_connector_helper_add(connector, &vmw_sou_connector_helper_funcs);
connector->status = vmw_du_connector_detect(connector, true);
vmw_connector_state_to_vcs(connector->state)->is_implicit = false;
ret = drm_encoder_init(dev, encoder, &vmw_screen_object_encoder_funcs,
DRM_MODE_ENCODER_VIRTUAL, NULL);
if (ret) {
DRM_ERROR("Failed to initialize encoder\n");
goto err_free_connector;
}
(void) drm_connector_attach_encoder(connector, encoder);
encoder->possible_crtcs = (1 << unit);
encoder->possible_clones = 0;
ret = drm_connector_register(connector);
if (ret) {
DRM_ERROR("Failed to register connector\n");
goto err_free_encoder;
}
vmw_du_crtc_reset(crtc);
ret = drm_crtc_init_with_planes(dev, crtc, &sou->base.primary,
&sou->base.cursor,
&vmw_screen_object_crtc_funcs, NULL);
if (ret) {
DRM_ERROR("Failed to initialize CRTC\n");
goto err_free_unregister;
}
drm_crtc_helper_add(crtc, &vmw_sou_crtc_helper_funcs);
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
dev_priv->hotplug_mode_update_property, 1);
drm_object_attach_property(&connector->base,
dev->mode_config.suggested_x_property, 0);
drm_object_attach_property(&connector->base,
dev->mode_config.suggested_y_property, 0);
if (dev_priv->implicit_placement_property)
drm_object_attach_property
(&connector->base,
dev_priv->implicit_placement_property,
sou->base.is_implicit);
return 0;
err_free_unregister:
drm_connector_unregister(connector);
err_free_encoder:
drm_encoder_cleanup(encoder);
err_free_connector:
drm_connector_cleanup(connector);
err_free:
kfree(sou);
return ret;
}
