static void lcm_resume(void)
{
unsigned int data_array[1];
MDELAY(5);
if(wakeup_by_swipe == false){
//reset_lcd_module(0);
//MDELAY(10); //seosc
ldo_p5m5_dsv_5v5_on();
MDELAY(5);
reset_lcd_module(0);
MDELAY(1);
reset_lcd_module(1);
MDELAY(1);
reset_lcd_module(0);
MDELAY(50);
}else{
LCM_PRINT("[LCD] lcm_resume wakeup_by_swipe\n");
}
DSI_clk_HS_mode(1);
MDELAY(120);
dsi_set_cmdq_V3(lcm_initialization_pre_sleep_out_V3, sizeof(lcm_initialization_pre_sleep_out_V3) / sizeof(LCM_setting_table_V3), 1);
MDELAY(120);
dsi_set_cmdq_V3(lcm_initialization_post_sleep_out_V3, sizeof(lcm_initialization_post_sleep_out_V3) / sizeof(LCM_setting_table_V3), 1);
need_set_lcm_addr = 1;
LCM_PRINT("[LCD] lcm_resume\n");
}
static void init_lcm_registers(void)
{
#if 1
//DSI_clk_HS_mode(DISP_MODULE_DSI0, NULL, 1);
//push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
//if ( lge_get_board_revno() > EVB_PCB_REVISION )
//dsi_set_cmdq_V3(lcm_initialization_setting_rotation_V3, sizeof(lcm_initialization_setting_rotation_V3) / sizeof(LCM_setting_table_V3), 1);
dsi_set_cmdq_V3(lcm_initialization_setting_V3, sizeof(lcm_initialization_setting_V3) / sizeof(LCM_setting_table_V3), 1);
MDELAY(120);
//dsi_set_cmdq_V3(lcm_initialization_setting_V3_Disp_On, sizeof(lcm_initialization_setting_V3_Disp_On) / sizeof(LCM_setting_table_V3), 1);
#else
unsigned int data_array[32];
dsi_set_cmdq_V3(lcm_initialization_setting_V3, sizeof(lcm_initialization_setting_V3) / sizeof(LCM_setting_table_V3), 1);
data_array[0] = 0x00290500; //Display On
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x00110500; //Sleep Out
dsi_set_cmdq(data_array, 1, 1);
MDELAY(120);
#endif
LCM_PRINT("[LCD] init_lcm_registers \n");
}
static void lcm_init(void)
{
//SET_RESET_PIN(0);
//MDELAY(20);
//SET_RESET_PIN(1);
//MDELAY(20);
lcm_is_init = true;
dct_pmic_VGP2_enable(1);
MDELAY(5);
mt_set_gpio_mode(GPIO112,GPIO_MODE_00);
mt_set_gpio_dir(GPIO112,GPIO_DIR_OUT);
mt_set_gpio_out(GPIO112,GPIO_OUT_ONE);
MDELAY(5);
//SET_RESET_PIN(0);
mt_set_gpio_out(GPIO112,GPIO_OUT_ZERO);
MDELAY(5);
//SET_RESET_PIN(1);
mt_set_gpio_out(GPIO112,GPIO_OUT_ONE);
MDELAY(20);
dsi_set_cmdq_V3(lcm_initialization_setting,sizeof(lcm_initialization_setting)/sizeof(lcm_initialization_setting[0]),1);
#ifdef BUILD_LK
printf("[LK]---cmd---hx8394_hd720_dsi_vdo_truly----%s------\n",__func__);
#else
printk("[KERNEL]---cmd---hx8394_hd720_dsi_vdo_truly----%s------\n",__func__);
#endif
}
void lcm_force_lut_update(void)
{
dsi_set_cmdq_V3(lcm_lut_update_in_V3, sizeof(lcm_lut_update_in_V3) / sizeof(LCM_setting_table_V3), 1);
MDELAY(120);
LCM_PRINT("[LCD] lut update for upgrading Touch FW \n");
}
void init_lcm_registers_sleep_2nd(void)
{
unsigned int data_array[1];
//dsi_set_cmdq_V3(lcm_initialization_for_sleep_in_pre, sizeof(lcm_initialization_for_sleep_in_pre) / sizeof(LCM_setting_table_V3), 1);
//MDELAY(150);
dsi_set_cmdq_V3(lcm_initialization_for_sleep_in_post, sizeof(lcm_initialization_for_sleep_in_post) / sizeof(LCM_setting_table_V3), 1);
LCM_PRINT("[LCD] init_lcm_registers_sleep 2nd \n");
}
static void lcm_suspend(void)
{
unsigned int data_array[16];
dsi_set_cmdq_V3(lcm_initialization_sleep_in_V3, sizeof(lcm_initialization_sleep_in_V3) / sizeof(LCM_setting_table_V3), 1);
MDELAY(120);
lcm_set_pwm_for_mix(0);
MDELAY(16);
DPI_DisableClk();
DSI_Reset();
DSI_clk_HS_mode(1);
DSI_SetMode(0);
/* MDELAY(1); */
dsi_set_cmdq_V3(lcm_suspend_ULPS_for_data0_in_V3, sizeof(lcm_suspend_ULPS_for_data0_in_V3) / sizeof(LCM_setting_table_V3), 1);
MDELAY(200);
LCM_PRINT("[LCD] lcm_suspend\n");
}
static void lcm_init(void)
{
SET_RESET_PIN(1);
SET_RESET_PIN(0);
MDELAY(10);
SET_RESET_PIN(1);
MDELAY(120);
dsi_set_cmdq_V3(lcm_initialization_setting,sizeof(lcm_initialization_setting)/sizeof(lcm_initialization_setting[0]),1);
}
static void lcm_suspend(void)
{
dsi_set_cmdq_V3(lcm_deep_sleep_mode_in_setting, sizeof(lcm_deep_sleep_mode_in_setting)/sizeof(lcm_deep_sleep_mode_in_setting[0]), 1);
SET_RESET_PIN(1);
SET_RESET_PIN(0);
MDELAY(20); // 1ms
SET_RESET_PIN(1);
MDELAY(120);
}
static void lcm_init(void)
{
SET_RESET_PIN(1);
SET_RESET_PIN(0);
MDELAY(10);
SET_RESET_PIN(1);
MDELAY(120);
dsi_set_cmdq_V3(lcm_initialization_setting,sizeof(lcm_initialization_setting)/sizeof(lcm_initialization_setting[0]),1);
//push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
}
static void lcm_suspend(void)
{
//init_lcm_registers_sleep(); //Need to use this in LPWG
dsi_set_cmdq_V3(lcm_initialization_sleep_in_V3, sizeof(lcm_initialization_sleep_in_V3) / sizeof(LCM_setting_table_V3), 1);
MDELAY(120);
#ifndef LGE_LPWG_SUPPORT
SET_RESET_PIN(0);
MDELAY(20);
//dsv low
ldo_p5m5_dsv_5v5_off();
MDELAY(10);
//VCI/IOVCC off
ldo_1v8io_off();
//ldo_ext_3v0_off();
#endif
LCM_PRINT("[LCD] lcm_suspend \n");
}
static void lcm_init(void)
{
SET_RESET_PIN(1);
MDELAY(10);
SET_RESET_PIN(0);
MDELAY(10);//Must > 10ms
SET_RESET_PIN(1);
MDELAY(120);//Must > 120ms
if (para_init_table != NULL)
{
push_table(para_init_table, para_init_size, 1);
}
else
{
dsi_set_cmdq_V3(lcm_initialization_setting,ARRAY_SIZE(lcm_initialization_setting),1);
}
//push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
}
static void lcm_init(void)
{
int i, j;
int size;
SET_RESET_PIN(1);
SET_RESET_PIN(0);
MDELAY(10);
SET_RESET_PIN(1);
MDELAY(120);
if (para_init_table != NULL)
{
push_table(para_init_table, para_init_size, 1);
}
else
{
dsi_set_cmdq_V3(lcm_initialization_setting,sizeof(lcm_initialization_setting)/sizeof(lcm_initialization_setting[0]),1);
}
}
static void lcm_init(void)
{
LCM_DBG();
#ifdef BUILD_LK
printf("%s, LK \n", __func__);
#else
printk("%s, kernel", __func__);
#endif
//lcm_compare_id();
//SET_RESET_PIN(0);
lcd_power_en(1);
MDELAY(80);
lcd_reset(1);
MDELAY(5);
lcd_reset(0);
MDELAY(5);
lcd_reset(1);
MDELAY(120);
dsi_set_cmdq_V3(lcm_initialization_setting,sizeof(lcm_initialization_setting)/sizeof(lcm_initialization_setting[0]),1);
}
static void lcm_init(void)
{
//enable VSP & VSN
lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENP_PIN, GPIO_OUT_ONE);
lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENN_PIN, GPIO_OUT_ONE);
MDELAY(50);
//reset high to low to high
SET_RESET_PIN(1);
MDELAY(20);
SET_RESET_PIN(0);
MDELAY(30);
SET_RESET_PIN(1);
MDELAY(30);
//lcm_id_pin_handle();
//lcm_register();
dsi_set_cmdq_V3(lcm_initialization_setting,sizeof(lcm_initialization_setting)/sizeof(lcm_initialization_setting[0]),1);
//push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
}
static void lcm_suspend(void)
{
//Back to MP.P7 baseline , solve LCD display abnormal On the right
// when phone sleep , config output low, disable backlight drv chip
// lcm_util.set_gpio_out(GPIO_LCD_DRV_EN_PIN, GPIO_OUT_ZERO);
dsi_set_cmdq_V3(lcm_deep_sleep_mode_in_setting, sizeof(lcm_deep_sleep_mode_in_setting) / sizeof(lcm_deep_sleep_mode_in_setting[0]), 1);
//reset low
lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ZERO);
MDELAY(5);
//disable VSP & VSN
lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENP_PIN, GPIO_OUT_ZERO);
lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENN_PIN, GPIO_OUT_ZERO);
MDELAY(5);
/*#ifdef BUILD_LK
;
#else
printk("sym lcm_suspend\n");
#endif
lcm_compare_id();*/
// printk("kernel:boe_nt35521_lcm_suspend\n");
}
static void init_lcm_registers(void)
{
dsi_set_cmdq_V3(lcm_initialization_setting_V3, sizeof(lcm_initialization_setting_V3) / sizeof(LCM_setting_table_V3), 1);
LCM_PRINT("[LCD] init_lcm_registers\n");
}
static void init_lcm_registers(void)
{
unsigned int data_array[32];
#if 1
#if 1
push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
#else
data_array[0] = 0xff513900; //Write_Display_Brightness
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x2c533900; //Write_CTRL_Display
// data_array[0] = 0x0c533900; //Write_CTRL_Display
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x40553900; //Write_CABC
// data_array[0] = 0x00553900; //Write_CABC
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x04B02900; //Test command
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x84C12900; //Test Command
data_array[1] = 0x00000061;
dsi_set_cmdq(data_array, 2, 1);
#if 0
data_array[0] = 0x00C72900; //Gamma 1
data_array[1] = 0x2C20160A;
data_array[2] = 0x36524339;
data_array[3] = 0x5A584B3E;
data_array[4] = 0x0A00675F;
data_array[5] = 0x392C2016;
data_array[6] = 0x3E365243;
data_array[7] = 0x5A584B3E;
data_array[8] = 0x00000067;
dsi_set_cmdq(data_array, 9, 1);
data_array[0] = 0x00C82900; //Gamma 2
data_array[1] = 0x00000000;
data_array[2] = 0x000000FC;
data_array[3] = 0x00FC0000;
data_array[4] = 0x00000000;
data_array[5] = 0x000000FC;
dsi_set_cmdq(data_array, 6, 1);
data_array[0] = 0x07B82900; //Backlight 1
data_array[1] = 0x40001E90;
data_array[2] = 0x00000032;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x07B92900; //Backlight 2
data_array[1] = 0x2D203C8C;
data_array[2] = 0x00000087;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x07BA2900; //Backlight 3
data_array[1] = 0x3C103C82;
data_array[2] = 0x000000B4;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x7DCE2900; //Backlight 4
data_array[1] = 0x55494340;
data_array[2] = 0x94827162;
data_array[3] = 0xDBCBB9A8;
data_array[4] = 0xFFFCF5E9;
data_array[5] = 0x040402FF;
data_array[6] = 0x0002FFFC;
data_array[7] = 0x00010444;
dsi_set_cmdq(data_array, 8, 1);
data_array[0] = 0x01BB2900; //SRE ctrl 1
data_array[0] = 0x0000141E;
dsi_set_cmdq(data_array, 2, 1);
data_array[0] = 0x01BC2900; //SRE ctrl 2
data_array[0] = 0x00003250;
dsi_set_cmdq(data_array, 2, 1);
data_array[0] = 0x00BD2900; //SRE ctrl 3
data_array[0] = 0x0000A0B4;
dsi_set_cmdq(data_array, 2, 1);
#endif
data_array[0] = 0x01D62900; //test commad
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x00361500; //set address mode
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x00290500; //Display On
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x00110500; //Sleep Out
dsi_set_cmdq(data_array, 1, 1);
#endif
#else
dsi_set_cmdq_V3(lcm_initialization_setting_V3, sizeof(lcm_initialization_setting_V3) / sizeof(LCM_setting_table_V3), 1);
data_array[0] = 0x00290500; //Display On
dsi_set_cmdq(data_array, 1, 1);
data_array[0] = 0x00110500; //Sleep Out
dsi_set_cmdq(data_array, 1, 1);
MDELAY(120);
#endif
LCM_PRINT("[LCD] init_lcm_registers \n");
}
static void init_lcm_registers_sleep(void)
{
dsi_set_cmdq_V3(lcm_initialization_for_sleep_in_pre, sizeof(lcm_initialization_for_sleep_in_pre) / sizeof(LCM_setting_table_V3), 1);
MDELAY(60);
LCM_PRINT("[LCD] init_lcm_registers_sleep \n");
}
static void init_lcm_registers(void)
{
unsigned int data_array[32];
#if 0
#if 0
push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
data_array[0] = 0x00110500; //Sleep Out
dsi_set_cmdq(data_array, 1, 1);
MDELAY(200);
data_array[0] = 0x00290500; //Display On
dsi_set_cmdq(data_array, 1, 1);
MDELAY(200);
#else
// data_array[0] = 0x00010500; //sw_reset
// dsi_set_cmdq(data_array, 1, 1);
// MDELAY(200);
#if 0
data_array[0] = 0x00062902; //vcom control
data_array[1] = 0x00A50000;
data_array[2] = 0x00000113;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x00042902; //Flip
data_array[1] = 0x02650001;
dsi_set_cmdq(data_array, 2, 1);
data_array[0] = 0x00062902; //gate bias trim
data_array[1] = 0x001F0007;
data_array[2] = 0x000001A6;
dsi_set_cmdq(data_array, 3, 1);
#endif
#if 0 //test1
data_array[0] = 0x00042902; //vcom control
data_array[1] = 0x011300A5;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x00042902; //Flip
data_array[1] = 0x02650001;
dsi_set_cmdq(data_array, 2, 1);
data_array[0] = 0x00042902; //gate bias trim
data_array[1] = 0x016A071F;
dsi_set_cmdq(data_array, 3, 1);
#endif
#if 0
data_array[0] = 0x00062902; //vcom control
data_array[1] = 0x000000A5;
data_array[2] = 0x00000113;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x00042902; //Flip
data_array[1] = 0x02650001;
dsi_set_cmdq(data_array, 2, 1);
data_array[0] = 0x00062902; //gate bias trim
data_array[1] = 0x0007001F;
data_array[2] = 0x000001A6;
dsi_set_cmdq(data_array, 3, 1);
#endif
// data_array[0] = 0x01000500; //reset
// dsi_set_cmdq(data_array, 1, 1);
// MDELAY(120);
data_array[0] = 0x00110500; //Sleep Out
dsi_set_cmdq(data_array, 1, 1);
//MDELAY(100);
data_array[0] = 0x00062902; //vcom control
data_array[1] = 0x000000A5;
data_array[2] = 0x00000113;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x00042902; //Flip
data_array[1] = 0x02650002;
dsi_set_cmdq(data_array, 2, 1);
data_array[0] = 0x00062902; //gate bias trim
data_array[1] = 0x0007001F;
data_array[2] = 0x000001A6;
dsi_set_cmdq(data_array, 3, 1);
data_array[0] = 0x00290500; //Display On
dsi_set_cmdq(data_array, 1, 1);
MDELAY(100);
#endif
#else
dsi_set_cmdq_V3(lcm_initialization_setting_V3, sizeof(lcm_initialization_setting_V3) / sizeof(LCM_setting_table_V3), 1);
#if 0
data_array[0] = 0x00110500; //Sleep Out
dsi_set_cmdq(data_array, 1, 1);
MDELAY(200);
data_array[0] = 0x00290500; //Display On
dsi_set_cmdq(data_array, 1, 1);
MDELAY(200);
#endif
#endif
LCM_PRINT("[LCD] init_lcm_registers \n");
}
