Esempio n. 1
0
void unwrap_phase(int n, float w, float *phase)
/************************************************************************
unwrap_phase - unwrap the phase
*************************************************************************
Input:
n		number of samples
w		unwrapping flag; returns an error if w=0
phase		array[n] of input phase values

Output:
phase		array[n] of output phase values
*************************************************************************
Notes:
The phase is assumed to be continuously increasing. The strategy is
to look at the change in phase (dphase) with each time step. If it is larger
than PI/w, then use the previous value of dphase. No attempt is
made at smoothing the dphase curve.
*************************************************************************
Author: John Stockwell, CWP, 1994
************************************************************************/
{
	int i;
	float pibyw=0.0;
	float *dphase;
	float *temp;

	/* prevent division by zero in PI/w */
	if (w==0)  err("wrapping parameter is zero");
	else       pibyw = PI/w;

	/* allocate space */
	dphase = ealloc1float(n);
	temp = ealloc1float(n);

	/* initialize */
	temp[0]=phase[0];
	dphase[0]=0.0;

	/* compute unwrapped phase at each time step */
	for (i = 1; i < n; ++i) {

		/* compute jump in phase */
		dphase[i] = ABS(phase[i] - phase[i-1]);

		/* if dphase >= PI/w, use previous dphase value */
		if (ABS(dphase[i] - dphase[i-1]) >= pibyw )
			dphase[i] = dphase[i-1];

		/* sum up values in temporary vector */
		temp[i] = temp[i-1] + dphase[i];
	}

	/* assign values of temporary vector to phase[i] */
	for (i=0; i<n; ++i) phase[i] = temp[i];

	/* free space */
	free1float(temp);
	free1float(dphase);
}
Esempio n. 2
0
void integ(float **mig,int nz,float dz,int nx,int m,float **migi) 
/* integration of a two-dimensional array	 
  input: 
    mig[nx][nz]		two-dimensional array
  output:
    migi[nx][nz+2*m] 	integrated array 
*/
{
	int nfft, nw, ix, iz, iw;
	float  *amp, dw, *rt;
	complex *ct;


        /* Set up FFT parameters */
        nfft = npfaro(nz+m, 2 * (nz+m));
        if (nfft >= SU_NFLTS || nfft >= 720720)
                err("Padded nt=%d -- too big", nfft);

        nw = nfft/2 + 1;
	dw = 2.0*PI/(nfft*dz);

	amp = ealloc1float(nw);
	for(iw=1; iw<nw; ++iw) 
		amp[iw] = 0.5/(nfft*(1-cos(iw*dw*dz)));
	amp[0] = amp[1];

        /* Allocate fft arrays */
        rt   = ealloc1float(nfft);
        ct   = ealloc1complex(nw);

	for(ix=0; ix<nx; ++ix) {
        	memcpy(rt, mig[ix], nz*FSIZE);
       	 	memset((void *) (rt + nz), 0, (nfft-nz)*FSIZE); 
        	pfarc(1, nfft, rt, ct);

        	/* Integrate traces   */
		for(iw=0; iw<nw; ++iw){
			ct[iw].i = ct[iw].i*amp[iw];
			ct[iw].r = ct[iw].r*amp[iw];
		}

        	pfacr(-1, nfft, ct, rt);

        	for (iz=0; iz<m; ++iz)  migi[ix][iz] = rt[nfft-m+iz];
        	for (iz=0; iz<nz+m; ++iz)  migi[ix][iz+m] = rt[iz];
	}

	free1float(amp);
	free1float(rt);
	free1complex(ct);
}
Esempio n. 3
0
/* Break up reflectors by duplicating interior (x,z) points */
void breakReflectors (int *nr, float **ar, 
	int **nu, float ***xu, float ***zu)
{
	int nri,nro,*nui,*nuo,ir,jr,iu;
	float *ari,*aro,**xui,**zui,**xuo,**zuo;

	/* input reflectors */
	nri = *nr;
	ari = *ar;
	nui = *nu;
	xui = *xu;
	zui = *zu;

	/* number of output reflectors */
	for (ir=0,nro=0; ir<nri; ++ir)
		nro += nui[ir]-1;

	/* make output reflectors and free space for input reflectors */
	aro = ealloc1float(nro);
	nuo = ealloc1int(nro);
	xuo = ealloc1(nro,sizeof(float*));
	zuo = ealloc1(nro,sizeof(float*));
	for (ir=0,jr=0; ir<nri; ++ir) {
		for (iu=0; iu<nui[ir]-1; ++iu,++jr) {
			aro[jr] = ari[ir];
			nuo[jr] = 2;
			xuo[jr] = ealloc1float(2);
			zuo[jr] = ealloc1float(2);
			xuo[jr][0] = xui[ir][iu];
			zuo[jr][0] = zui[ir][iu];
			xuo[jr][1] = xui[ir][iu+1];
			zuo[jr][1] = zui[ir][iu+1];
		}
		free1float(xui[ir]);
		free1float(zui[ir]);
	}
	free1float(ari);
	free1int(nui);
	free1(xui);
	free1(zui);

	/* output reflectors */
	*nr = nro;
	*ar = aro;
	*nu = nuo;
	*xu = xuo;
	*zu = zuo;
}
Esempio n. 4
0
void makericker (float fpeak, float dt, Wavelet **w)
/*****************************************************************************
Make Ricker wavelet
******************************************************************************
Input:
fpeak		peak frequency of wavelet
dt		time sampling interval

Output:
w		Ricker wavelet
*****************************************************************************/
{
	int iw,lw,it,jt;
	float t,x,*wv;
	
	iw = -(1+1.0/(fpeak*dt));
	lw = 1-2*iw;
	wv = ealloc1float(lw);
	for (it=iw,jt=0,t=it*dt; jt<lw; ++it,++jt,t+=dt) {
		x = PI*fpeak*t;
		x = x*x;
		wv[jt] = exp(-x)*(1.0-2.0*x);
	}
	*w = ealloc1(1,sizeof(Wavelet));
	(*w)->lw = lw;
	(*w)->iw = iw;
	(*w)->wv = wv;
}
Esempio n. 5
0
static void mkvrms (int ndmo, float *tdmo, float *vdmo,
	int nt, float dt, float ft, float *vrms)
/*****************************************************************************
make uniformly sampled vrms(t) for DMO
******************************************************************************
Input:
ndmo		number of tdmo,vdmo pairs
tdmo		array[ndmo] of times
vdmo		array[ndmo] of rms velocities
nt		number of time samples
dt		time sampling interval
ft		first time sample

Output:
vrms		array[nt] of rms velocities
******************************************************************************
Author:  Dave Hale, Colorado School of Mines, 10/03/91
*****************************************************************************/
{
	int it;
	float t,(*vdmod)[4];

		vdmod = (float(*)[4])ealloc1float(ndmo*4);
	cmonot(ndmo,tdmo,vdmo,vdmod);
	for (it=0,t=ft; it<nt; ++it,t+=dt)
		intcub(0,ndmo,tdmo,vdmod,1,&t,&vrms[it]);
	free1float((float*)vdmod);
}
Esempio n. 6
0
void twindow(int nt, int wtime, float *data)
/************************************************************
twindow - simple time gating
*************************************************************
Input:
nt	number of time samples
wtime	= n*dt   where n are integer ex=1,2,3,4,5,...
          wtime=3 as default
 used for Frequency Weighted and Thin-bed attributes
*************************************************************
Author:	UGM (Geophysics Students): Agung Wiyono, 2005
************************************************************/
{
	float val;
	float *temp;
	int i;
	float sum;
	int nwin;
	
	nwin=2*wtime+1;
	temp = ealloc1float(nt);
	sum=0.0;
	for (i = 0; i< wtime+1; ++i) {
		val = data[i];
		sum +=val;
	}
	/* weighted */
	temp[0] = sum/nwin;
	
	/* dt<wtime */
	for (i = 1; i < wtime; ++i) {
		val = data[i+wtime];
		sum+=val;
		++nwin;
		temp[i] = sum/nwin;
		}
	/*wtime<dt<dt-wtime */
	for (i = wtime ; i < nt-wtime; ++i) {
		val = data[i+wtime];
		sum += val;
		val = data[i-wtime];
		sum -=val;
		temp[i] = sum/nwin;
	}

	/*dt-wtime<dt*/
	for (i = nt - wtime; i < nt; ++i) {
		val = data[i-wtime];
		sum -= val;
		--nwin;
		temp[i] = sum/nwin;
	}
	
	
	for (i=0; i<nt; ++i) data[i] = temp[i];

	/* Memori free */
	free1float(temp);
}
Esempio n. 7
0
int
main(int argc, char **argv)
{
	int j,nt,flag,ntout;
	float *buf,*ttn,dt,dtout=0.0,tmin,tmax;

	/* Initialize */
	initargs(argc, argv);
	requestdoc(1);

	/* Get information from the first header */
	if (!gettr(&tr)) err("can't get first trace");
	nt = tr.ns;
	dt = (float) tr.dt/1000000.0;

	if (!getparfloat("tmin", &tmin)) tmin=0.1*nt*dt;
	if (!getparint("flag", &flag)) flag=1;
	if(flag==1) {
		dtout=tmin*2.*dt;
		tmax=nt*dt;
		ntout=1+tmax*tmax/dtout; CHECK_NT("ntout",ntout);
		ttn=ealloc1float(ntout);
		for(j=0;j<ntout;j++) ttn[j]=sqrt(j*dtout);
	}else{
		if (!getparfloat("dt", &dt)) dtout=0.004;
		ntout=1+sqrt(nt*dt)/dtout; CHECK_NT("ntout",ntout);
		ttn=ealloc1float(ntout);
		for(j=0;j<ntout;j++) ttn[j]=j*j*dtout*dtout;
	}
	buf = ealloc1float(nt);

	fprintf(stderr,"sutsq: ntin=%d dtin=%f ntout=%d dtout=%f\n",
		nt,dt,ntout,dtout);

	/* Main loop over traces */
	do {
		for(j=0;j<nt;j++) buf[j]=tr.data[j];
		tr.ns = ntout;
		tr.dt = dtout*1000000.;			
		ints8r(nt,dt,0.,buf,0.0,0.0,
			ntout,ttn,tr.data);
		puttr(&tr);
	} while (gettr(&tr));
	
	return(CWP_Exit());
}
Esempio n. 8
0
void tabtrcoefs(int ninf, float *rho, float *v, float **theta,
					float *dip, float *trcoefs)
/*****************************************************************************
table transmission coefficients
******************************************************************************
Input:
ninf		x coordinate of source (must be within x samples)
xxxx

Output:
trcoefs		array[1..ninf] containing transmission coefficients
******************************************************************************
Notes:
The parameters are exactly the same as in the main program.
This is a subroutine so that the temporary arrays may be disposed
of after exit. This routine is only called once.
******************************************************************************
Author:  Brian Sumner, Colorado School of Mines, 1985
******************************************************************************/
{
/**
* Local variables:
*    TEMP, TMP - temporary arrays
*    I, J - loop variables
*    T1, T2 - temporaries
*    R, P - more temporaries
**/

	int i,j;
	float t1, t2, r, p, *temp, **tmp;

	temp = ealloc1float(ninf+1);
	tmp = ealloc2float(ninf+1, ninf+1);
	
	for (i = 0; i <= ninf; ++i)  temp[i] = rho[i]*v[i];

	for (j = 1; j <= ninf; ++j) {
		for (i = 1; i < j; ++i) {
			t1 = temp[i]*cos(theta[j][i-1]+dip[i]);
			t2 = temp[i-1]*cos(theta[j][i]+dip[i]);
			r = (t1 - t2)/(t1 + t2);
			tmp[j][i] = 1.0 - r*r;
		}
	}

	for (j = 1; j <= ninf; ++j) {
		t1 = temp[j];
		t2 = temp[j-1];
		p = (t1 - t2)/(t1 + t2);
		for (i = 1; i < j; ++i)  p *= tmp[j][i];
		trcoefs[j] = p;
	}
	
	/* free space */
	free1float(temp);
	free2float(tmp);
}
Esempio n. 9
0
void remove_fb(float *yp,float *ym,int n,short *scaler,short *shft)
/* Find Scale and timeshift 

	Yp = data trace
	Ym = wavelet
	
	F=min(Yp(x) - Ym(x)*a)^2 is a function to minimize for scaler
	
	find shift first with xcorrelation then
	
	solve for a - scaler 
*/



{

#define RAMPR 5

	void find_p(float *ym,float *yp,float *a,int *b,int n);
	
	int it,ir;
	
	float a=1.0;
	int b=0;
	int ramps;
	float *a_ramp;
	
	ramps=NINT(n-n/RAMPR);
	
	find_p(ym,yp,&a,&b,n);
	
	a_ramp = ealloc1float(n);
	
	for(it=0;it<ramps;it++)
		a_ramp[it]=1.0;
	
	for(it=ramps,ir=0;it<n;it++,ir++) {
		a_ramp[it]=1.0-(float)ir/(float)(n-ramps-1);
	}
	
	
	
	if (b<0) {
		for(it=0;it<n+b;it++) 
			yp[it-b] -=ym[it]*a*a_ramp[it-b];
	} else {
		for(it=0;it<n-b;it++) 
			yp[it] -=ym[it-b]*a*a_ramp[it+b];
	}
	
	*scaler = NINT((1.0-a)*100.0);
	*shft = b;
	
	free1float(a_ramp);
}
Esempio n. 10
0
void find_p(float *ym,float *yp,float *a,int *b,int n)
{
#define NP 1

	float *y,**x;
	int n_s;
	
	int k;
	float *res;
	int jpvt[NP];
	float qraux[NP];
	float work[NP]; 
	
														
	x = ealloc2float(n,1);
	y = ealloc1float(n);
	res = ealloc1float(n);
	
	memcpy((void *) &x[0][0], (const void *) &ym[0], n*FSIZE);
	memset((void *) y, (int) '\0', n*FSIZE);	
	
	/* Solve for shift */
 	xcor (n,0,ym,n,0,yp,n,-n/2,y);
	/* pick the maximum */
	*b = -max_index(n,y,1)+n/2;

	n_s = n-abs(*b);
 	
	if (*b < 0) {
		memcpy((void *) &x[0][0], (const void *) &ym[*b], n_s*FSIZE);
	} else {
		memcpy((void *) &x[0][*b], (const void *) &ym[0], n_s*FSIZE);
													
	}
	/* Solve for scaler */
	sqrst(x, n_s, 1,yp,0.0,a,res,&k,&jpvt[0],&qraux[0],&work[0]);
	
	
	
	free2float(x);
	free1float(res);
	free1float(y);
}
Esempio n. 11
0
int main( int argc, char *argv[] )
{
	int n1;		/* number of x y values */
	int stinc;	/* x increment  */
	int f;		/* filter length */
	int m;		/* filter method flag */
	float *x;	/* array of x index values */
	float *y; 	/* array of y values */

        /* Initialize */
        initargs(argc, argv);
        requestdoc(1);

    
	MUSTGETPARINT("n1",&n1);
	if( !getparint("stinc",&stinc)) stinc=1;
	if( !getparint("f",&f)) f=5;
	if( !getparint("m",&m)) m=1;
	
	/* allocate arrays */
	x = ealloc1float(n1);
	y = ealloc1float(n1);
	
	/* Read data into the arrays */
	{ int i;
		for(i=0;i<n1;i++) {
			fscanf(stdin," %f %f\n",&x[i],&y[i]);
		}
	}
	/* smooth */
	sm_st(x,y,n1,f,stinc,m);
	
	/* Write out */
	{ int i;
		for(i=0;i<n1;i++) {
			fprintf(stdout," %10.3f %10.3f\n",x[i],y[i]);
		}
	}
	
	free1float(x);
	free1float(y);
   	return EXIT_SUCCESS;
}
Esempio n. 12
0
int
main(int argc, char **argv)
{
	int nt;				/* number of samples on input */
	int ntout;			/* number of samples on output */
	int it;				/* counter */
	int istart;			/* beginning sample */
	int izero;			/* - istart */
	int norm;			/* user defined normalization value */
	int sym;			/* symmetric plot? */
	float scale;			/* scale factor computed from norm */
	float *temp=NULL;		/* temporary array */
	float dt;			/* time sampling interval (sec) */

	/* hook up getpar */
	initargs(argc, argv);
	requestdoc(1);

	/* get information from the first header */
	if (!gettr(&tr)) err("can't get first trace");
	nt = tr.ns;
	dt = tr.dt/1000000.0;

	/* get parameters */
	if (!getparint("ntout",&ntout)) ntout=101;
	if (!getparint("norm",&norm)) norm = 1;
	if (!getparint("sym",&sym)) sym = 1;
        checkpars();
	
	/* allocate workspace */
	temp = ealloc1float(ntout);
	
	/* index of first sample */
	if (sym == 0) istart = 0;
	else istart = -(ntout-1)/2;

	/* index of sample at time zero */
	izero = -istart;
	
	/* loop over traces */
	do {
		xcor(nt,0,tr.data,nt,0,tr.data,ntout,istart,temp);
		if (norm) {
			scale = 1.0/(temp[izero]==0.0?1.0:temp[izero]);
			for (it=0; it<ntout; ++it)  temp[it] *= scale;
		}
		memcpy((void *) tr.data, (const void *) temp, ntout*FSIZE);
		tr.ns = ntout;
		tr.f1 = -dt*ntout/2.0;
		tr.delrt = 0;
		puttr(&tr);
	} while(gettr(&tr));

	return(CWP_Exit());
}
Esempio n. 13
0
int main( int argc, char *argv[] )
{
	/* Segy data constans */
	int nt;                 /* number of time samples               */
        int ntr=0;              /* number of traces                     */
	
	float *filter;
	int fnl,fnr;
	int fnp;
	int fld;
	int fm;
        float dt;               /* sample interval in secs              */
	float prw;		/* pre-withening */
	
	initargs(argc, argv);
   	requestdoc(1);
	
        /* get information from the first header */
        if (!gettr(&tr)) err("can't get first trace");
        nt = tr.ns;

        if (!getparfloat("dt", &dt)) dt = ((double) tr.dt)/1000000.0;
        if (!dt) {
                dt = .002;
                warn("dt not set, assumed to be .002");
        }
	
	if(!getparint ("fnl", &fnl)) fnl=15;
	fnr=fnl;
	if(!getparint ("fnp", &fnp)) fnp=fnr+fnl+fnr/2;
	if(!getparfloat ("prw", &prw)) prw=1.0;
		
	if(fnl!=0) {
		fld=0; fm=0; fnr=fnl;
		filter = ealloc1float(fnp);
		SG_smoothing_filter(fnp,fnl,fnr,fld,fm,filter); 
/*		rwa_smoothing_filter(1,fnl,fnr,filter); */ 
	} else {
		filter= NULL;
	}
	
	do {
		do_minphdec(tr.data,nt,filter,fnl,fnr,prw);
		
		tr.ns=nt;
		ntr++;		
		puttr(&tr);
	} while(gettr(&tr));
	
   return EXIT_SUCCESS;
}
Esempio n. 14
0
int
main(int argc, char **argv)
{
	char *outpar;		/* name of file holding output parfile	*/
	FILE *outparfp;		/* ... its file pointer			*/
	int n1;			/* number of floats per line		*/
	size_t n1read;		/* number of items read			*/
	size_t n2 = 0;		/* number of lines in input file 	*/
	float *z;		/* binary floats			*/

	/* Hook up getpar */
	initargs(argc, argv);
	requestdoc(1);

	/* Get parameters and do set up */
	if (!getparstring("outpar", &outpar))	outpar = "/dev/tty" ;
	outparfp = efopen(outpar, "w");
	MUSTGETPARINT("n1",&n1);

	z = ealloc1float(n1);

	/* Loop over data converting to ascii */
	while ((n1read = efread(z, FSIZE, n1, stdin))) {
		register int i1;

		if (n1read != n1)
			err("out of data in forming line #%d", n2+1);
		for (i1 = 0; i1 < n1; ++i1)
/* z2xyz.c:70: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘size_t’ */
/* 			printf("%d %d %11.4e \n",n2,i1,z[i1]); */
#if __WORDSIZE == 64
			printf("%lu %d %11.4e \n",n2,i1,z[i1]);
#else
			printf("%u %d %11.4e \n",n2,i1,z[i1]);
#endif
		++n2;
	}


	/* Make par file */
/* z2xyz.c:76: warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘size_t’ */
/* 	fprintf(outparfp, "n2=%d\n", n2); */
#if __WORDSIZE == 64
	fprintf(outparfp, "n2=%lu\n", n2);
#else
	fprintf(outparfp, "n2=%u\n", n2);
#endif

	return(CWP_Exit());
}
Esempio n. 15
0
int
main (int argc, char **argv)
{
	int n1,n2,i2;
	float f1,f2,d1,d2,*x;
	char *label2="Trace",label[256];
	FILE *infp=stdin,*outfp=stdout;

	/* hook up getpar to handle the parameters */
	initargs(argc,argv);
	requestdoc(0);

	/* get optional parameters */
	if (!getparint("n1",&n1)) {
		if (efseeko(infp,(off_t) 0,SEEK_END)==-1)
			err("input file size is unknown; specify n1!\n");
		if ((n1=((int) (eftello(infp)/((off_t) sizeof(float)))))<=0)
			err("input file size is unknown; specify n1!\n");
		efseeko(infp,(off_t) 0,SEEK_SET);
	}

	if (!getparfloat("d1",&d1)) d1 = 1.0;
	if (!getparfloat("f1",&f1)) f1 = d1;
	if (!getparint("n2",&n2)) n2 = -1;
	if (!getparfloat("d2",&d2)) d2 = 1.0;
	if (!getparfloat("f2",&f2)) f2 = d2;
	getparstring("label2",&label2);

	/* allocate space */
	x = ealloc1float(n1);

	/* loop over 2nd dimension */
	for (i2=0; i2<n2 || n2<0; i2++) {

		/* read input array, watching for end of file */
		if (efread(x,sizeof(float),n1,infp)!=n1) break;
			
		/* make plot label */
		sprintf(label,"%s %0.4g",label2,f2+i2*d2);

		/* plot the array */
		prp1d(outfp,label,n1,d1,f1,x);
	}
	
	return(CWP_Exit());
}
Esempio n. 16
0
void differentiate(int n, float h, float *f)
/************************************************************************
differentiate - compute the 1st derivative of a function f[]
************************************************************************
Input:
n		number of samples
h		sample rate
f		array[n] of input values

Output:
f		array[n], the derivative of f
************************************************************************
Notes:
This is a simple 2 point centered-difference differentiator.
The derivatives at the endpoints are computed via 2 point leading and
lagging differences. 
************************************************************************
Author: John Stockwell, CWP, 1994
************************************************************************/
{
	int i;	
	float *temp;
	float h2=2*h;

	/* allocate space in temporary vector */
	temp = ealloc1float(n);

	/* do first as a leading difference */
	temp[0] = (f[1] - f[0])/h;

	/* do the middle values as a centered difference */
	for (i=1; i<n-1; ++i) temp[i] = (f[i+1] - f[i-1])/h2;

	/* do last value as a lagging difference */
	temp[n-1] = (f[n-1] - f[n-2])/h;

	for (i=0 ; i < n ; ++i) f[i] = temp[i];

	free1float(temp);
}
Esempio n. 17
0
static void makezt (int nz, float dz, float fz, float v[], 
	int nt, float dt, float ft, float z[])
/************************************************************************
makezt - compute z(t) from v(z)
*************************************************************************
Input:
nz	number of z values (output)
dz	depth sampling interval (output)
fz	first depth value (output)
v[]	array of velocities as a function of time t
nt	number of time samples
dt	time sampling interval
ft	first time sample
Output:
z[]	array of z values as a function of t
*************************************************************************
Author: CWP: based on maketz by Dave Hale (c. 1992)
*************************************************************************/
{
	int iz;			/* counter */
	float vfz;		/* velocity at the first depth sample */
	float vlz;		/* velocity at the last depth sample */
	float *t=NULL;		/* array of time values as a function of z */

	/* allocate space */
	t = ealloc1float(nz);

	/* calculate t(z) from v(z) */
	t[0] = 2.0*fz/v[0];
	for (iz=1; iz<nz; ++iz)
		t[iz] = t[iz-1]+2.0*dz/v[iz-1];
	vfz = v[0];
	vlz = v[nz-1];

	/* compute z(t) from t(z) */
	tzzt(nz,dz,fz,t,vfz,vlz,nt,dt,ft,z);
	free1float(t);
}
Esempio n. 18
0
void bandpass(float *data, int nt, int nfft, int nfreq,
		float *filterj, float *ftracej)
{
	float *rt;
	complex *ct;
	int i;

	rt  = ealloc1float(nfft);
	ct  = ealloc1complex(nfreq);
        /* Load trace into rt (zero-padded) */
        memcpy((char*) rt, (char*) data, nt*FSIZE);
        bzero(rt + nt, (nfft-nt)*FSIZE);

        /* FFT, filter, inverse FFT */
        pfarc(1, nfft, rt, ct);
        for (i = 0; i < nfreq; ++i)  ct[i] = crmul(ct[i], filterj[i]);
        pfacr(-1, nfft, ct, rt);

        /* Load traces back in, recall filter had nfft factor */
        for (i = 0; i < nt; ++i)  ftracej[i] = rt[i]; /* ftracej = rt ?? */
	free(rt);
	free(ct);
}
Esempio n. 19
0
void do_smooth(float *data, int nt, int isl)
/**********************************************************************
do_smooth - smooth data in a window of length isl samples
**********************************************************************
Input:
data[]		array of floats of size nt
nt		size of array
isl		integerized window length
Output:
returns smoothed data.

**********************************************************************
Author: Nils Maercklin,
 	 GeoForschungsZentrum (GFZ) Potsdam, Germany, 2001.
 	 E-mail: [email protected]
**********************************************************************/
{
	register int it,jt;
	float *tmpdata, sval;

	tmpdata=ealloc1float(nt);
	for (it=0;it<nt;it++) {
	sval=0.0;
	if ( (it >= isl/2) && (it < nt-isl/2) ) {
		for (jt=it-isl/2;jt<it+isl/2;jt++) {
			sval += data[jt];
		}
		tmpdata[it] = sval / (float) isl;
		} else {
			tmpdata[it] = data[it];
		}
	}

	memcpy((void *) data, (const void *) tmpdata, nt*FSIZE);

	free1float(tmpdata);
}
Esempio n. 20
0
void do_smooth(float *data, int nt, int isl)
{
    int it,jt;
    float *tmpdata, sval;
    
    tmpdata=ealloc1float(nt);

    for (it=0;it<nt;it++) {
          sval=0.0;
          if ( (it >= isl/2) && (it < nt-isl/2) ) {
            for (jt=it-isl/2;jt<it+isl/2;jt++) {
                  sval += data[jt];
            }
            tmpdata[it] = sval / (float) isl;
      }
      else {
            tmpdata[it] = 0.0;
      }
    }
    for (it=0;it<nt;it++) {
          data[it] = tmpdata[it];
    }
    free1float(tmpdata);
}
Esempio n. 21
0
int
main(int argc, char **argv)
{
	register float *rt;	/* real trace				*/
	register float *mt;	/* magnitude trace			*/
	register float *ct;	/* resampled centroid trace 		*/

	int nt;			/* number of points on input trace	*/
	int verbose;		/* flag to get advisory messages	*/
	float dt;		/* sampling interval in secs		*/
	float invdt;		/* inverse dt				*/
	float hdt;		/* half dt				*/

	cwp_Bool inflect=cwp_false;	/* inflection point flag	  */
	cwp_Bool zero_cross=cwp_false; /* zero-crossing flag		*/
	cwp_Bool max_passed=cwp_false; /* maximum value passed flag	*/

	float *time;		/* array of trace sample time values	*/
	float sum_amp;	  /* sum of amplitudes in lobe		*/
	float t_cen;		/* centroid about amplitude axis	*/

	int isamp;		/* t_cen time sample number		*/

	float a_cen;		/* centroid about time axis		*/
	float a_mom;		/* moment about time axis		*/
	float t_mom;		/* moment about amplitude axis	  */
	float a_height;	 /* height of region for moment calc	*/
	float t_width;	  /* width of region for moment calc	*/

	int first;		/* number of first sample in lobe	*/
	int last;		/* number of last sample in lobe	*/
	int prev;		/* number of past sample in amp moment  */

	int small;		/* sample number of current smaller mag */
	int nvals;		/* number of samples in current lobe	*/
	int nvals_min;	  /* minimum samples in lobe for inclusion*/

	int i,k;		/* counter indices			*/

	/* Initialize */
	initargs(argc, argv);
	requestdoc(1);
	if (!getparint("verbose", &verbose))	verbose=1;

	if (!getparint("nvals_min", &nvals_min))	nvals_min = 1;

	/* Get info from first trace */ 
	if (!gettr(&tr))  err("can't get first trace");
	nt = tr.ns;


	/* dt is used only to set output header value d1 */
	if (!getparfloat("dt", &dt))	dt = ((double) tr.dt)/1000000.0;
	if (!dt) {
		dt = .004;
		if (verbose) warn("dt not set, assumed to be .004");
	}
	invdt = 1.0 / dt;
	hdt = 0.5 * dt;


	/* Allocate space */
	rt = ealloc1float(nt);
	ct = ealloc1float(nt);
	mt = ealloc1float(nt);
	time = ealloc1float(nt);

	/* create an array of times */
	for (i = 0; i < nt; ++i) {
		time[i] = (float)(i + 1) * dt;
	}

	/* Main loop over traces */
	do {
	 	register int i;

		/* Load trace into rt and zero ct */
		memcpy((void *) rt, (const void *) tr.data, nt*FSIZE);
		memset((void *) ct, 0, nt*FSIZE);

		first = 0;
		mt[0] = fabs(rt[0]);
		sum_amp = rt[0];
		t_mom = time[0] * mt[0];

		for (i = 1; i < nt; ++i) {
			mt[i] = fabs(rt[i]);

			/* test for zero-crossing or inflection point */
			if(rt[i] * rt[i-1] > (float)0) {
				if(mt[i] > mt[i-1]) {
					if(max_passed) inflect = cwp_true;
			} else {
				max_passed = cwp_true;
			}
		} else {
			zero_cross = cwp_true;
		}

		/* if a zero-crossing or inflection point is not	*/
		/* encountered on the current trace sample,		*/
		/* accumulate the time moment				*/
		/* and sum of the lobe amplitude			*/
		if(!zero_cross && !inflect) {
			sum_amp = sum_amp + rt[i];
			t_mom = t_mom + (time[i] * mt[i]);
		} else {

			/* otherwise a zero-crossing or inflection has	*/
			/* occured, so stop and determine amplitude 	*/
			/* centroid and store results as a centroid	*/
			/* sample for the current lobe		   */

			/* determine the amplitude centroid */
			last = i - 1;

			/* if inflection point has been found divide it */
			/* between the calcs for this lobe and the next */
			if (inflect) {
				last = i;
				rt[last] = rt[last] * 0.5;
				mt[last] = fabs(rt[last]);
				sum_amp = sum_amp + rt[last];
				t_mom = t_mom + (time[last] * mt[last]);
			}

			nvals = last - first + 1;

			if(nvals == 1) {

				/* check to see if lobe is big enough	*/
				/* to be included			*/
				if(nvals >= nvals_min) {
		  			ct[i] = rt[i] * 0.5;
				}

				first = i;

				inflect = cwp_false;
				max_passed = cwp_false;
				zero_cross = cwp_false;

				sum_amp = rt[i];
				t_mom = time[i] * mt[i];
			} else {
				a_height = mt[first];

				if(mt[first] > mt[last]) {
		  			a_height = mt[last];
				}

				t_width = time[last] - time[first] + dt;
				a_mom = a_height * 0.5;
				a_cen = t_width * a_height * a_mom;
				small = first;

				if (mt[first] > mt[last]) small = last;
				for (k = 1; k < nvals; k ++) {
					prev = small;

		  			if (prev == first) first = first + 1;
		  			else last = last - 1; 

		  			small = first;
		  			if(mt[first] > mt[last]) small = last;

		  			a_height = rt[small] - rt[prev];
					a_mom = rt[prev] + (a_height * 0.5);
		  			t_width = t_width - dt;
		  			a_cen = a_cen + a_mom*t_width*a_height;
				}
				if(sum_amp == 0.0) {
					warn("i = %d, sum_amp = %f,divide by zero !",
						i,sum_amp);
				}
				a_cen = a_cen / (sum_amp * dt);

				/* determine the time centroid */
				t_cen = t_mom / fabs(sum_amp);

				/* start accumulating amplitude sum	*/
				/* and time moment for next lobe	*/
				sum_amp = rt[i];
				t_mom = time[i] * mt[i];
 
				/* set sample corresponding to t_cen	*/
				/* to amplitude a_cen 			*/
				isamp = (int) ((t_cen * invdt) + hdt);
		
				/* check to see if lobe is big enough	*/
				/* to be included			*/
				if(nvals >= nvals_min) {
					ct[isamp] = a_cen;
				}

				first = i;
				inflect = cwp_false;
				max_passed = cwp_false;
				zero_cross = cwp_false;
			}  /* end if block for case of nvals > 1 */
		}  /* end calc of new centroid */
	  }  /* end of loop down input trace */
		
	  /* Store values */

	  for (i = 0; i < nt; ++i) {
		tr.data[i] = ct[i];
	  }

	  /* Set header values  and write centroid trace */
	  tr.ns = nt;
	  puttr(&tr);

	} while (gettr(&tr));


	return(CWP_Exit());
}
Esempio n. 22
0
int main(int argc, char **argv)
{
	char *plotcmd;		/* build pswigb command for popen	*/
	float *trbuf;		/* trace buffer				*/
	FILE *plotfp;		/* fp for plot data			*/
	int nt;			/* number of samples on trace	  	*/
	int ntr;		/* number of traces			*/
	int verbose;		/* verbose flag				*/
	float d1;		/* time/depth sample rate		*/
	float d2;		/* trace/dx sample rate			*/
	float f1;		/* tmin/zmin			   	*/
	float f2;		/* tracemin/xmin			*/
	cwp_Bool seismic;	/* is this seismic data?		*/
	cwp_Bool have_ntr=cwp_false;/* is ntr known from header or user?	*/
	char *tmpdir;		/* directory path for tmp files		*/
	cwp_Bool istmpdir=cwp_false;/* true for user given path		*/

	char *cwproot;		/* value of CWPROOT environment variable*/
	char *bindir;		/* directory path for tmp files		*/

	/* Support for irregularly spaced data */
	cwp_String key;		/* header key word with x2 information  */
	cwp_String type1=NULL;	/* ... its type				*/
	int index1=0;		/* ... its index			*/
	Value val;		/* value of key				*/
	Value scale;		/* Value of scaler			*/
	cwp_String type2=NULL;	/* ... its type				*/
	int index2=0;		/* ... its index			*/
	cwp_Bool isDepth=cwp_false;	/* Is this key a type of depth?		*/
	cwp_Bool isCoord=cwp_false;	/* Is this key a type of coordinate?	*/
	cwp_Bool irregular=cwp_false;  /* if true, reading x2 from header	*/ 
	cwp_String x2string;	/* string of x2 values			*/
	off_t x2len;		/* ... its length 			*/
	cwp_String style;	/* style parameter			*/


	/* Initialize */
	initargs(argc, argv);
	requestdoc(1);
	
	/* Get info from first trace */
	if (!gettr(&tr)) err("can't get first trace");
	seismic = ISSEISMIC(tr.trid); 
	nt = tr.ns;
	ntr = tr.ntr;
	if (ntr) have_ntr = cwp_true; 

	if (!getparint("verbose", &verbose))    verbose=0;
	if (!getparfloat("d1", &d1)) {
		if      (tr.d1)  d1 = tr.d1;
		else if (tr.dt)  d1 = ((double) tr.dt)/1000000.0;
		else {
			if (seismic) {
				d1 = 0.004;
				warn("tr.dt not set, assuming dt=0.004");
			} else { /* non-seismic data */
				d1 = 1.0;
				warn("tr.d1 not set, assuming d1=1.0");
			}
		}
	}


	if (!getparfloat("f1", &f1)) {
		if      (tr.f1)     f1 = tr.f1;
		else if (tr.delrt)  f1 = (float) tr.delrt/1000.0;
		else		f1 = 0.0;
	}

	/* Get or set ntr */
	if (getparint("n2", &ntr) || getparint("ntr", &ntr)) have_ntr = cwp_true;
	if (!getparfloat("d2", &d2)) d2 = (tr.d2) ? tr.d2 : 1.0;


	if (!getparfloat("f2", &f2)) {
		if	(tr.f2)	f2 = tr.f2;
		else if (tr.tracr)  f2 = (float) tr.tracr;
		else if (tr.tracl)  f2 = (float) tr.tracl;
		else if (seismic)   f2 = 1.0;
		else		    f2 = 0.0;
	}

	if (!getparstring("style", &style)) style = "seismic";
	 	
	if (getparstring("key", &key)) {
		type1 = hdtype(key);
		if ( (index1 = getindex(key)) == -1 )
			err("%s: keyword not in segy.h: '%s'", __FILE__, key);
		irregular = cwp_true;
		isDepth = IS_DEPTH(key);
		isCoord = IS_COORD(key);
		if (isDepth) {
		   index2 = getindex("scalel");
		   type2 = hdtype("scalel");
		} else if (isCoord) {
		   index2 = getindex("scalco");
		   type2 = hdtype("scalco");
		}
	}


	/* Look for user-supplied tmpdir */
	if (!getparstring("tmpdir",&tmpdir) &&
	    !(tmpdir = getenv("CWP_TMPDIR"))) tmpdir="";
	if (!STREQ(tmpdir, "") && access(tmpdir, WRITE_OK))
		err("you can't write in %s (or it doesn't exist)", tmpdir);

	/* See if CWPBIN environment variable is not set */
	if (!(bindir = getenv("CWPBIN"))) { /* construct bindir from CWPROOT */

		bindir = (char *) emalloc(BUFSIZ);

		/* Get value of CWPROOT environment variable */
		if (!(cwproot = getenv("CWPROOT"))) cwproot ="" ;
		if (STREQ(cwproot, "")) {
			warn("CWPROOT environment variable is not set! ");
			err("Set CWPROOT in shell environment as per instructions in CWP/SU Installation README files");
		}
		/* then bindir = $CWPROOT/bin */
		sprintf(bindir, "%s/bin", cwproot);
	}
	strcat(bindir,"/");   /* put / at the end of bindir */


	/* Allocate trace buffer */
	trbuf = ealloc1float(nt);


	if (!have_ntr || irregular ) { /* count traces */
		if (verbose) {
			if (irregular) {
				warn("trace spacing from header field %s",key);
				warn("... getting positions");

			} else {
				warn("n2 not getparred and "
				     "ntr header field not set");
				warn("....  counting traces");
			}
		}

		/* Create temporary "file" to hold data */
		if (STREQ(tmpdir,"")) {
			datafp = etmpfile();
			if (irregular) x2fp = etmpfile();
			if (verbose) warn("using tmpfile() call");
		} else { /* user-supplied tmpdir */
			char directory[BUFSIZ];
			strcpy(directory, tmpdir);
			strcpy(datafile, temporary_filename(directory));
			strcpy(x2file, temporary_filename(directory));
			/* Handle user interrupts */
			signal(SIGINT, (void (*) (int)) closefiles);
			signal(SIGQUIT, (void (*) (int)) closefiles);
			signal(SIGHUP,  (void (*) (int)) closefiles);
			signal(SIGTERM, (void (*) (int)) closefiles);
			datafp = efopen(datafile, "w+");
			if (irregular) x2fp = efopen(x2file, "w+");
			istmpdir=cwp_true;		
			if (verbose)
			      warn("putting temporary files in %s", directory);
		}

		/* Loop over input data and read to temporary file */
		ntr = 0;
		if(irregular ) {
		     float x,xmin=FLT_MAX,xmax=-FLT_MAX;

		     fprintf(x2fp,"x2=");
		     do {
			if(ntr) fprintf(x2fp,",");
			++ntr;
			gethval(&tr,index1,&val);
			if (isDepth || isCoord) {
			   gethval(&tr,index2,&scale);
			   x = (float) (vtod(type1,val) *
				 pow(10.0,vtod(type2,scale)));
			} else
			   x = vtof(type1,val);
			fprintf(x2fp,"%g",x);
			xmin = MIN(xmin,x);
			xmax = MAX(xmax,x);
			if (isDepth && STREQ(style,"vsp")) {
				int i;
				for (i = 0; i < nt; ++i) tr.data[i] *= -1.0;
			}
			efwrite(tr.data, FSIZE, nt, datafp);
		     } while (gettr(&tr));

		     /* Flip vertical axis if style = vsp */
		     if (isDepth && STREQ(style,"vsp")) {
			fprintf(x2fp," x2beg=%g x2end=%g",xmax,xmin);
			style = "normal";
		     }

		     if(xmin==xmax) {
			warn("values in header %s all equal,",key);
			warn("using f2=%f d2=%f",f2,d2);
			irregular=cwp_false;
			have_ntr=cwp_false;
			efclose(x2fp);
			if (istmpdir) eremove(x2file);
		     }

		} else {
			do {
				++ntr;
				efwrite(tr.data, FSIZE, nt, datafp);
			} while (gettr(&tr));
			/* Save naive user */
			if (STREQ(style,"vsp")) {
				style = "normal";
				warn("style=vsp requires key= to be set");
			}
		}


	}

	/* Set up pswigb command line */
	if (irregular ) {
		x2len = (off_t) eftell( x2fp );
		x2string = (char *) emalloc( ++x2len );
		rewind(x2fp);
		fread(x2string,sizeof(char),x2len,x2fp);
		plotcmd = (char *) emalloc(x2len+BUFSIZ);
		if (STREQ(style,"vsp")) {
			style = "normal";
		}
		sprintf(plotcmd, "%spswigb n1=%d d1=%f f1=%f %s style=%s", bindir,
			   nt, d1, f1, x2string, style);
		free(x2string);
	} else {
		if (STREQ(style,"vsp")) {
			style = "normal";
		}
		plotcmd = (char *) emalloc(BUFSIZ);
		sprintf(plotcmd,
			"%spswigb n1=%d n2=%d d1=%f d2=%f f1=%f f2=%f style=%s", bindir,
			   nt, ntr, d1, d2, f1, f2, style);
	}


	for (--argc, ++argv; argc; --argc, ++argv) {
		if (strncmp(*argv, "d1=", 3) && /* skip those already set */
		    strncmp(*argv, "d2=", 3) &&
		    strncmp(*argv, "f1=", 3) &&
		    strncmp(*argv, "f2=", 3) &&
		    strncmp(*argv, "style=", 6)){
		    
			strcat(plotcmd, " ");   /* put a space between args */
			strcat(plotcmd, "\"");  /* user quotes are stripped */
			strcat(plotcmd, *argv); /* add the arg */
			strcat(plotcmd, "\"");  /* user quotes are stripped */
		}
	}


	/* Open pipe to pswigb and send the traces */
	plotfp = epopen(plotcmd, "w");
	free(plotcmd);

	if (!have_ntr || irregular) { /* send out stored traces one by one */
		rewind(datafp);
		{ register int itr;
			for (itr = 0; itr < ntr; ++itr) {
				efread (trbuf, FSIZE, nt, datafp);
				efwrite(trbuf, FSIZE, nt, plotfp);
			}
		}
	} else { /* just pump out traces and let pswigb do the work */
		do {
			efwrite(tr.data, FSIZE, nt, plotfp);
		} while (gettr(&tr));
	}


	/* Clean up */
	epclose(plotfp);
	if (!have_ntr) {
		efclose(datafp);
		if (istmpdir) eremove(datafile);
	}
	if (irregular) {
		efclose(x2fp);
		if (istmpdir) eremove(x2file);
	}

	return EXIT_SUCCESS;
}
Esempio n. 23
0
int
main(int argc, char **argv)
{
	char *key=NULL;		/* header key word from segy.h		*/
	char *type=NULL;	/* ... its type				*/
	int index;		/* ... its index			*/
	Value val;		/* ... its value			*/
	float fval;		/* ... its value cast to float		*/

	float *xshift=NULL;	/* array of key shift curve values	*/
	float *tshift=NULL;	/* ...		shift curve time values */

	int nxshift;		/* number of key shift values		*/
	int ntshift;		/* ...		shift time values 	*/

	int nxtshift;		/* number of shift values 		*/

	int it;			/* sample counter			*/
	int itr;		/* trace counter			*/
	int nt;			/* number of time samples 		*/
	int ntr=0;		/* number of traces			*/
	int *inshift=NULL;	/* array of (integer) time shift values
				   used for positioning shifted trace in
				   data[][]				*/

	float dt;		/* time sampling interval		*/

	cwp_String xfile="";	/* file containing positions by key	*/
	FILE *xfilep=NULL;	/* ... its file pointer			*/
	cwp_String tfile="";	/* file containing times	 	*/
	FILE *tfilep=NULL;	/* ... its file pointer			*/

	int verbose;		/* flag for printing information	*/
	char *tmpdir=NULL;	/* directory path for tmp files		*/
	cwp_Bool istmpdir=cwp_false;/* true for user-given path		*/

	int median;		/* flag for median filter		*/
	int nmed;		/* no. of traces to median filter	*/
	int nmix;		/* number of traces to mix over		*/
	int imix;		/* mixing counter			*/
	float *mix=NULL;	/* array of mix values			*/
	int sign;		/* flag for up/down shift		*/
	int shiftmin=0;		/* minimum time shift (in samples)	*/
	int shiftmax=0;		/* maximum time shift (in samples)	*/
	int ntdshift;		/* nt + shiftmax			*/

	size_t mixbytes;	/* size of mixing array			*/
	size_t databytes;	/* size of data array			*/
	size_t shiftbytes;	/* size of data array			*/
	float *temp=NULL;	/* temporary array			*/
	float *dtemp=NULL;	/* temporary array			*/
	float *stemp=NULL;	/* rwh median sort array		*/
	float **data=NULL;	/* mixing array 			*/
	int subtract;		/* flag for subtracting shifted data	*/

	/* rwh extra pointers for median sort */
	int first;		/* start pointer in ring buffer */
	int middle;		/* middle pointer in ring buffer */
	int last;		/* last pointer in ring buffer */
	int halfwidth;		/* mid point */
	int trcount;		/* pointer to current start trace number */
	float tmp;		/* temp storage for bubble sort */
	int rindex;		/* wrap around index for ring buffer */
	int jmix;		/* internal pointer for bubble sort */
	

	/* Initialize */
	initargs(argc, argv);
	requestdoc(1);

	/* Get parameters */
	if (!(getparstring("xfile",&xfile) && getparstring("tfile",&tfile))) {
		if (!(nxshift = countparval("xshift")))
			err("must give xshift= vector");
		if (!(ntshift = countparval("tshift")))
			err("must give tshift= vector");
		if (nxshift != ntshift)
			err("lengths of xshift, tshift must be the same");
		xshift = ealloc1float(nxshift);	getparfloat("xshift", xshift);
		tshift = ealloc1float(nxshift);	getparfloat("tshift", tshift);
	} else {
		MUSTGETPARINT("nshift",&nxtshift);
		nxshift = nxtshift;
		xshift = ealloc1float(nxtshift);
		tshift = ealloc1float(nxtshift);

		if((xfilep=fopen(xfile,"r"))==NULL)
			err("cannot open xfile=%s\n",xfile);
		if (fread(xshift,sizeof(float),nxtshift,xfilep)!=nxtshift)
			err("error reading xfile=%s\n",xfile);
		fclose(xfilep);

		if((tfilep=fopen(tfile,"r"))==NULL)
			err("cannot open tfile=%s\n",tfile);
		if (fread(tshift,sizeof(float),nxtshift,tfilep)!=nxtshift)
			err("error reading tfile=%s\n",tfile);
		fclose(tfilep);
	}
	if (!getparstring("key", &key))		key = "tracl";

	/* Get key type and index */
	type = hdtype(key);
	index = getindex(key);   

	/* Get mix weighting values values */
	if ((nmix = countparval("mix"))!=0) {
		mix = ealloc1float(nmix);
		getparfloat("mix",mix);
		/* rwh check nmix is odd */
		if (nmix%2==0) {
			err("number of mixing coefficients must be odd");
		}		
	} else {
		nmix = 5;
		mix = ealloc1float(nmix);
		mix[0] = VAL0;
		mix[1] = VAL1;
		mix[2] = VAL2;
		mix[3] = VAL3;
		mix[4] = VAL4;
	}
	
	/* Get remaning parameters */
	if (!getparint("median",&median))	median = 0;
	if (!getparint("nmed",&nmed) && median)	nmed = 5;
	if (!getparint("sign",&sign))		sign = -1;
	if (!getparint("subtract",&subtract))	subtract = 1;
	if (!getparint("verbose", &verbose))	verbose = 0;

	/* rwh check nmed is odd */
	if (median && nmed%2==0) {
		nmed=nmed+1;
		warn("increased nmed by 1 to ensure it is odd");
	}

	/* Look for user-supplied tmpdir */
	if (!getparstring("tmpdir",&tmpdir) &&
	    !(tmpdir = getenv("CWP_TMPDIR"))) tmpdir="";
	if (!STREQ(tmpdir, "") && access(tmpdir, WRITE_OK))
		err("you can't write in %s (or it doesn't exist)", tmpdir);

	/* rwh fix for median filter if median true set nmix=nmed */
	if (!median) {
		/* Divide mixing weights by number of traces to mix */
		for (imix = 0; imix < nmix; ++imix)
			mix[imix]=mix[imix]/((float) nmix);
	} else {
		nmix=nmed;
	}

	/* Get info from first trace */
	if (!gettr(&tr)) err("can't read first trace");
	if (!tr.dt) err("dt header field must be set");
	dt   = ((double) tr.dt)/1000000.0;
	nt = (int) tr.ns;
	databytes = FSIZE*nt;

	/* Tempfiles */
	if (STREQ(tmpdir,"")) {
		tracefp = etmpfile();
		headerfp = etmpfile();
		if (verbose) warn("using tmpfile() call");
	} else { /* user-supplied tmpdir */
		char directory[BUFSIZ];
		strcpy(directory, tmpdir);
		strcpy(tracefile, temporary_filename(directory));
		strcpy(headerfile, temporary_filename(directory));
		/* Trap signals so can remove temp files */
		signal(SIGINT,  (void (*) (int)) closefiles);
		signal(SIGQUIT, (void (*) (int)) closefiles);
		signal(SIGHUP,  (void (*) (int)) closefiles);
		signal(SIGTERM, (void (*) (int)) closefiles);
		tracefp = efopen(tracefile, "w+");
		headerfp = efopen(headerfile, "w+");
      		istmpdir=cwp_true;		
		if (verbose) warn("putting temporary files in %s", directory);
	}

	/* Read headers and data while getting a count */
	do {
		++ntr;
		efwrite(&tr, 1, HDRBYTES, headerfp);
		efwrite(tr.data, 1, databytes, tracefp);   

	} while (gettr(&tr));
	rewind(headerfp);
	rewind(tracefp);
	
	/* Allocate space for inshift vector */
	inshift = ealloc1int(ntr);

	/* Loop over headers */
 	for (itr=0; itr<ntr; ++itr) {
		float tmin=tr.delrt/1000.0;
		float t;

		/* Read header values */
		efread(&tr, 1, HDRBYTES, headerfp);

		/* Get value of key and convert to float */
		gethval(&tr, index, &val);
		fval = vtof(type,val);

		/* Linearly interpolate between (xshift,tshift) values */
		intlin(nxshift,xshift,tshift,tmin,tshift[nxshift-1],1,&fval,&t);
		
		/* allow for fractional shifts -> requires interpolation */ 
		inshift[itr] = NINT((t - tmin)/dt);
		
		/* Find minimum and maximum shifts */
		if (itr==0) {
			 shiftmax=inshift[0];
			 shiftmin=inshift[0];
		} else {
			shiftmax = MAX(inshift[itr],shiftmax);
			shiftmin = MIN(inshift[itr],shiftmin);
		}
	}
	rewind(headerfp);
	rewind(tracefp);

	if (verbose) {
		for (itr=0;itr<ntr;itr++)
			warn("inshift[%d]=%d",itr,inshift[itr]);
	}

	/* Compute databytes per trace and bytes in mixing panel */
	ntdshift = nt + shiftmax;
	shiftbytes = FSIZE*ntdshift;
	mixbytes = shiftbytes*nmix;
	if (verbose) {
		warn("nt=%d  shiftmax=%d  shiftmin=%d",nt,shiftmax,shiftmin);
		warn("ntdshift=%d  shiftbytes=%d  mixbytes=%d",
						ntdshift,shiftbytes,mixbytes);
	}
	
	/* Allocate space and zero  data array */
	data = ealloc2float(ntdshift,nmix);
	temp = ealloc1float(ntdshift);
	dtemp = ealloc1float(nt);
	memset( (void *) data[0], 0, mixbytes);

	/* rwh array for out of place bubble sort (so we do not corrupt order in ring buffer */ 
	stemp = ealloc1float(nmix);

	/* rwh first preload ring buffer symmetrically (now you know why nmix must be odd) */
	trcount=-1;
	halfwidth=(nmix-1)/2+1;
	first = 0;
	last  = nmix-1;
	middle = (nmix-1)/2;

	for (itr=0; itr<halfwidth; itr++) {
		efread(tr.data, 1, databytes, tracefp);
		trcount++;
		for(it=0; it<nt; ++it) {
			/* sign to account for positive or negative shift */
			/* tr.data needs to be interpolated for non-integer shifts */
			data[middle-itr][it + shiftmax + sign*inshift[itr]] = tr.data[it];
			data[middle+itr][it + shiftmax + sign*inshift[itr]] = tr.data[it];
		}
	}
	
	/* Loop over traces performing median filtering  */
 	for (itr=0; itr<ntr; ++itr) {

		/* paste header and data on output trace */
		efread(&tr, 1, HDRBYTES, headerfp);

		/* Zero out temp and dtemp */
		memset((void *) temp, 0, shiftbytes);
		memset((void *) dtemp, 0, databytes);

		/* Loop over time samples */
		for (it=0; it<nt; ++it) {

			/* Weighted moving average (mix) ? */
			if (!median) {
				for(imix=0; imix<nmix; ++imix) {
					temp[it] += data[imix][it] * mix[imix];
				}
			} else {
			
			/* inlcude median stack */
			/* rwh do bubble sort and choose median value */
				for(imix=0; imix<nmix; ++imix) {
					stemp[imix]=data[imix][it];
				}
				for (imix=0; imix<nmix-1; imix++) {
					for (jmix=0; jmix<nmix-1-imix; jmix++) {
						if (stemp[jmix+1] < stemp[jmix]) {
							tmp = stemp[jmix];
							stemp[jmix] = stemp[jmix+1];
							stemp[jmix+1] = tmp;
						}
					}
				}
				temp[it] = stemp[middle];
			}

			/* shift back mixed data and put into dtemp */
			if (subtract) {
				if ((it - shiftmax - sign*inshift[itr])>=0)
					dtemp[it - shiftmax - sign*inshift[itr]] = data[middle][it]-temp[it];
			} else {
				if ((it - shiftmax)>=0)
				dtemp[it - shiftmax - sign*inshift[itr]] = temp[it];
			}
		}
		memcpy((void *) tr.data,(const void *) dtemp,databytes);
			
		/* Bump rows of data[][] over by 1 to free first row for next tr.data */
		for (imix=nmix-1; 0<imix; --imix)
			memcpy((void *) data[imix],(const void *) data[imix-1],shiftbytes);
			/*for (it=0; it<nt; ++it)
				data[imix][it] = data[imix-1][it];*/

		/* Write output trace */
		tr.ns = nt;
		puttr(&tr);

		/* read next trace into buffer */
		if (trcount < ntr) {
			efread(tr.data, 1, databytes, tracefp);
			trcount++;

			/* read tr.data into first row of mixing array */
			/* WMH: changed ntdshift to nt */
			for(it=0; it<nt; ++it) {
				/* sign to account for positive or negative shift */
				/* tr.data needs to be interpolated for non-integer shifts */
				data[0][it + shiftmax + sign*inshift[trcount]] = tr.data[it];
			}
		} else {
			rindex=2*(trcount-ntr);
			memcpy((void *) data[0],(const void *) data[rindex],shiftbytes);
			trcount++;
		}

	}

	if (verbose && subtract)	warn("filtered data subtracted from input");

	/* Clean up */
	efclose(headerfp);
	if (istmpdir) eremove(headerfile);
	efclose(tracefp);
	if (istmpdir) eremove(tracefile);

	return(CWP_Exit());
}
Esempio n. 24
0
int
main(int argc, char **argv)
{
   char *tmpdir ;                 /* directory path for tmp files */
   cwp_Bool istmpdir=cwp_false ;  /* true for user given path */
   float *hedr ;                  /* the headers */
   float *data ;                  /* the data */

   int nt ;                       /* number of trace samples */
   float dt ;                     /* sample interval, sec */
   float delrt ;                  /* delay recording time, sec */
   cwp_String key[SU_NKEYS] ;     /* array of keywords */
   cwp_String type ;              /* key string type */
   int nkeys ;                    /* number of keywords */
   int ikey,ntr = 0 ;	          /* counters */
   int num ;                      /* number of traces to dump */
   int numtr = 4 ;                /* number of traces to dump */
   int hpf ;                      /* header print format */

   /* Initialize */
   initargs(argc, argv) ;
   requestdoc(1) ;

   /* Look for user-supplied tmpdir */
   if (!getparstring("tmpdir",&tmpdir) &&
       !(tmpdir = getenv("CWP_TMPDIR"))) tmpdir="";
   if (!STREQ(tmpdir, "") && access(tmpdir, WRITE_OK))
       err("you can't write in %s (or it doesn't exist)", tmpdir);

   /* Get values from first trace */
   if (!gettr(&tr)) err("can't get first trace");
   nt = (int) tr.ns ;                  /* Get nt */
   dt = ((double) tr.dt)/1000000.0 ;   /* microsecs to secs */
   if (!dt) getparfloat("dt", &dt) ;
   if (!dt) MUSTGETPARFLOAT("dt", &dt) ;
   delrt = ((double) tr.delrt)/1000.0 ; /* millisecs to secs */

   /* Get parameters */
   if (getparint ("num", &num)) numtr = num ;
   if ((nkeys=countparval("key"))!=0) getparstringarray("key",key) ;
   hedr = ealloc1float(nkeys*numtr) ;  /* make space for headers */
   if (!getparint ("hpf", &hpf)) hpf = 0 ;

   /* Store traces, headers in tempfiles */
   if (STREQ(tmpdir,""))
   {
      tracefp = etmpfile();
      headerfp = etmpfile();

      do
      {
         ++ntr;
         efwrite(&tr, HDRBYTES, 1, headerfp);
         efwrite(tr.data, FSIZE, nt, tracefp);

         /* Get header values */
         for (ikey=0; ikey<nkeys; ++ikey)
         {
            Value val;
            float fval;

            gethdval(&tr, key[ikey], &val) ;
            type = hdtype(key[ikey]) ;
            fval = vtof(type,val) ;
            hedr[(ntr-1)*nkeys+ikey] = fval ;
         }

      }
      while (ntr<numtr  &&  gettr(&tr)) ;

   }
   else  /* user-supplied tmpdir */
   {
      char directory[BUFSIZ];
      strcpy(directory, tmpdir);
      strcpy(tracefile, temporary_filename(directory));
      strcpy(headerfile, temporary_filename(directory));
      /* Handle user interrupts */
      signal(SIGINT, (void (*) (int)) closefiles);
      signal(SIGQUIT, (void (*) (int)) closefiles);
      signal(SIGHUP,  (void (*) (int)) closefiles);
      signal(SIGTERM, (void (*) (int)) closefiles);
      tracefp = efopen(tracefile, "w+");
      headerfp = efopen(headerfile, "w+");
      istmpdir=cwp_true;      

      do
      {
         ++ntr;
         efwrite(&tr, HDRBYTES, 1, headerfp);
         efwrite(tr.data, FSIZE, nt, tracefp);

         /* Get header values */
         for (ikey=0; ikey<nkeys; ++ikey)
         {
            Value val;
            float fval;

            gethdval(&tr, key[ikey], &val) ;
            type = hdtype(key[ikey]) ;
            fval = vtof(type,val) ;
            hedr[(ntr-1)*nkeys+ikey] = fval ;
         }

      }
      while (ntr<numtr  &&  gettr(&tr)) ;

   }

   /* Rewind after read, allocate space */
   erewind(tracefp);
   erewind(headerfp);
   data = ealloc1float(nt*ntr);

   /* Load traces into data and close tmpfile */
   efread(data, FSIZE, nt*ntr, tracefp);
   efclose(tracefp);
   if (istmpdir) eremove(tracefile);

   rewind(headerfp);
   rewind(tracefp);

   /* Do trace work */
   dump(data, dt, hedr, key, delrt, nkeys, ntr, nt, hpf) ;

   /* close */
   efclose(headerfp);
   if (istmpdir) eremove(headerfile);

   free1(hedr) ;
   free1(data) ;

   return(CWP_Exit()) ;
}
Esempio n. 25
0
int main( int argc, char *argv[] )
{
	cwp_String keyg;	/* header key word from segy.h		*/
	cwp_String typeg;	/* ... its type				*/
	Value valg;
	cwp_String key[SU_NKEYS];	/* array of keywords		 */
	cwp_String type[SU_NKEYS];	/* array of keywords		 */
	int index[SU_NKEYS];	/* name of type of getparred key	 */
	
	segy **rec_o;		/* trace header+data matrix */	
	
	int first=0;	/* true when we passed the first gather */
	int ng=0;
	float dt;	/* time sampling interval		*/
	int nt;		/* number of time samples per trace	*/
	int ntr;	/* number of traces per ensemble	*/
	
	int nfft=0;		/* lenghth of padded array		*/
	float snfft;		/* scale factor for inverse fft		*/
	int nf=0;		/* number of frequencies		*/
	float d1;		/* frequency sampling int.		*/
	float *rt;		/* real trace				*/
	complex *ctmix;		/* complex trace			*/
	complex **fd;		/* frequency domain data		*/

	
	float padd;
	
	int nd;			/* number of dimensions */
	float *dx=NULL;
	float fac;
	float vmin;
	int vf;
	
	/* Trimming arrays */
	float *itrm=NULL;
	float *rtrm=NULL;
	float *wht=NULL;
	float trimp=15;
		
	/* Initialize */
	initargs(argc, argv);
	requestdoc(1);
	
	if (!getparstring("keyg", &keyg)) keyg ="ep";
	if (!getparint("vf", &vf)) vf = 1;
	if (!getparfloat("vmin", &vmin)) vmin = 5000;
	if (!getparfloat("padd", &padd)) padd = 25.0;
	padd = 1.0+padd/100.0;
	
	/* Get "key" values */
	nd=countparval("key");
	getparstringarray("key",key);

	/* get types and indexes corresponding to the keys */
	{ int ikey;
		for (ikey=0; ikey<nd; ++ikey) {
			type[ikey]=hdtype(key[ikey]);
			index[ikey]=getindex(key[ikey]);
		}
	}

	dx = ealloc1float(nd);
	MUSTGETPARFLOAT("dx",(float *)dx);
	
	if (!getparfloat("fac", &fac)) fac = 1.0;
	fac = MAX(fac,1.0);

	/* get the first record */
	rec_o = get_gather(&keyg,&typeg,&valg,&nt,&ntr,&dt,&first);
	if(ntr==0) err("Can't get first record\n");
	
	/* set up the fft */
	nfft = npfar(nt*padd);
	if (nfft >= SU_NFLTS || nfft >= PFA_MAX)
		 	err("Padded nt=%d--too big", nfft);
	nf = nfft/2 + 1;
	snfft=1.0/nfft;
	d1 = 1.0/(nfft*dt);
	
	rt = ealloc1float(nfft);
	ctmix = ealloc1complex(nf);
	
	
	do {
		ng++;
		 	
		fd = ealloc2complex(nf,ntr); 
		memset( (void *) ctmix, (int) '\0', nf*sizeof(complex));
		
		itrm = ealloc1float(ntr);
		rtrm = ealloc1float(ntr);
		wht = ealloc1float(ntr);

		/* transform the data into FX domain */
		{ unsigned int itr;
			for(itr=0;itr<ntr;itr++) {
				memcpy( (void *) rt, (const void *) (*rec_o[itr]).data,nt*FSIZE);
				memset( (void *) &rt[nt], (int) '\0', (nfft - nt)*FSIZE);
				pfarc(1, nfft, rt, fd[itr]);
			
			}
		}
		
		/* Do the mixing */
		{ unsigned int imx=0,itr,ifr;
		  float dist;
		  
		  	
			/* Find the trace to mix */
			for(itr=0;itr<ntr;itr++) 
				if((*rec_o[itr]).mark) {
					imx = itr;
					break;
				}
			
			memcpy( (void *) ctmix, (const void *) fd[imx],nf*sizeof(complex));
			
			/* Save the header */
			memcpy( (void *) &tr, (const void *) rec_o[imx],HDRBYTES);
 		  	
			/* weights */
			wht[imx] = 1.0;
			for(itr=0;itr<imx;itr++) {
				 dist=n_distance(rec_o,index,type,dx,nd,imx,itr);
				 wht[itr] = MIN(1.0/dist,1.0);
				 wht[itr] = 1.0;
			}
			
			for(itr=imx+1;itr<ntr;itr++) {
				 dist=n_distance(rec_o,index,type,dx,nd,imx,itr);
				 wht[itr] = MIN(1.0/dist,1.0);
				 wht[itr] = 1.0;
			}
				 
			
			/* Do the alpha trim for each trace */			
			for(ifr=0;ifr<nf;ifr++) {
 		  		for(itr=0;itr<ntr;itr++) {
					itrm[itr] = fd[itr][ifr].i;
					rtrm[itr] = fd[itr][ifr].r;
				}
				ctmix[ifr].i = alpha_trim_w(itrm,wht,ntr,trimp);
				ctmix[ifr].r = alpha_trim_w(rtrm,wht,ntr,trimp);
			}
			
					
		}
		
		
		{ unsigned int it;
			pfacr(-1, nfft, ctmix, rt);
				for(it=0;it<nt;it++) 		
					tr.data[it]=rt[it]*snfft;
		}
			
		free2complex(fd);

		{ unsigned int itr;
			for(itr=0;itr<ntr;itr++) {
				free1((void *)rec_o[itr]);
			}
		}
		
		puttr(&tr);
		
	    	rec_o = get_gather(&keyg,&typeg,&valg,&nt,&ntr,&dt,&first);
		
		fprintf(stderr," %d %d\n",ng,ntr);
		
		free1float(rtrm);
		free1float(itrm);
		free1float(wht);
		
	} while(ntr);
		
	
	free1float(rt);

	warn("Number of gathers %10d\n",ng);
	 
	return EXIT_SUCCESS;
}
Esempio n. 26
0
main(int argc, char **argv)
{
	char plotcmd[BUFSIZ];	/* build ximage command for popen 	*/
	float *trbuf;		/* trace buffer			 	*/
	FILE *datafp;		/* fp for trace data file		*/
	FILE *plotfp;		/* fp for plot data			*/
	int nt;			/* number of samples on trace		*/
	int ntr;		/* number of traces			*/
	float d1;		/* time/depth sample rate 		*/
	float d2;		/* trace/dx sample rate 		*/
	float f1;		/* tmin/zmin				*/
	float f2;		/* tracemin/xmin	 		*/
	bool seismic;		/* is this seismic data?		*/
	int panel;		/* panel to pick			*/
	int dtype;		/* type of display 			*/
	int ppos;		/* position of the panel		*/
	FILE *infp=stdin;
	int n3,n2,n1;
	


	/* Initialize */
	initargs(argc, argv);
	askdoc(1);
	

	/* Get info from headers and first trace */
      	fgethdr(infp,&ch,&bh);
	n1 = bh.hns;
	if(!getparint("ntpp",&n2)) {
		if (bh.tsort==2) {
	  		 n2 = bh.fold;
		} else {
	   		n2 = bh.ntrpr;
		} 
	}
	if (!fgettr(infp,&tr)) err("can't get first trace");
	nt = tr.ns;
	if ( n1!=nt ) 
	   warn("samples/trace in bhdr and trhdr different; trhdr used! \n");
	n1 = nt;
	fseek(infp,0L,2);
	n3=(ftell(infp)-EBCBYTES-BNYBYTES)/(n1*sizeof(float)+HDRBYTES)/n2;
        if(n3==0) {
	   n3=1;
	   n2=(ftell(infp)-EBCBYTES-BNYBYTES)/(n1*sizeof(float)+HDRBYTES);
	   warn("less traces were found in input! \n");
	}
	fseek(infp,0L,0);
 
	seismic =  (tr.trid == 0 || tr.trid == TREAL);

	if (!getparint("panel", &panel)) panel=1;
	if (!getparint("dtype", &dtype)) dtype=0;
	if (!getparfloat("d1", &d1)) {
		if (seismic) {
			/* sampling interval in ms or in m (ft) */
			if ( tr.dz!=0. ) { 
				d1 = tr.dz;	
			} else if (tr.dt) {
				d1 = (float) tr.dt / 1000.0;
				if (tr.dt<1000) d1 = tr.dt;
			} else {
				d1 = 0.004 * 1000.;
				warn("tr.dt not set, assuming dt=4");
			}
		} else { /* non-seismic data */
			if (tr.d1) {
				d1 = tr.d1;
			} else {
				d1 = 1.0;
				warn("tr.d1 not set, assuming d1=1.0");
			}
		}
	}

	if (!getparfloat("d2", &d2)) {
	   if(bh.tsort==2) {
	      d2 = tr.offset;
	   }
	   else {
	      d2 = tr.cdp;
	   }
	}

	if (!getparfloat("f1", &f1)) {
		if (seismic) {
			f1 = (tr.delrt) ? (float) tr.delrt/1000.0 : 0.0;
		        if(tr.delrt<1000) f1=tr.delrt;
			if(tr.dz!=0.) f1=tr.fz;
		} else {
			f1 = (tr.f1) ? tr.f1 : 0.0;
		}
	}

	if (!getparfloat("f2", &f2)) {
		if (bh.tsort==2) {
	           f2 = tr.offset;
		}
		else {
	           f2 = tr.cdp;
		}
	}


	/* Allocate trace buffer */
	trbuf = ealloc1float(nt);


	/* Create temporary "file" to hold data */
	datafp = etempfile(NULL);


	/* Loop over input traces & put them into the data file */
	ntr = 0;
     fseek(infp,EBCBYTES+BNYBYTES+(panel-1)*n2*(n1*sizeof(float)+HDRBYTES),0);


	for(ntr=0;ntr<n2;ntr++) {
	    	if(!fgettr(infp,&tr)) err("get trace error \n");
	    	efwrite(tr.data, FSIZE, nt, datafp);
	    	if(ntr==1) {
			if (bh.tsort==2) {
	       			if(!getparfloat("d2",&d2)) d2 = tr.offset-d2;
		  		if (!getparint("ppos", &ppos)) ppos = tr.cdp;
			} else {
	       			if(!getparfloat("d2",&d2)) d2 = tr.cdp-d2;
		  		if (!getparint("ppos", &ppos)) ppos = tr.offset;
			}
	    	}
	}



	/* Set up xipick or xwpick command line */
	if ( dtype == 0 ) {
	   sprintf(plotcmd,
"mipick n1=%d n2=%d d1=%f d2=%f f1=%f f2=%f ppos=%d",
		    n1, n2, d1, d2, f1, f2, ppos);
	} else {
	   sprintf(plotcmd,
"mwpick n1=%d n2=%d d1=%f d2=%f f1=%f f2=%f ppos=%d",
		    n1, n2, d1, d2, f1, f2, ppos);
	}

	for (--argc, ++argv; argc; --argc, ++argv) {
		if (strncmp(*argv, "d1=", 3) && /* skip those already set */
		    strncmp(*argv, "d2=", 3) &&
		    strncmp(*argv, "f1=", 3) &&
		    strncmp(*argv, "f2=", 3)) {
		    
			strcat(plotcmd, " ");   /* put a space between args */
			strcat(plotcmd, "\"");  /* user quotes are stripped */
			strcat(plotcmd, *argv); /* add the arg */
			strcat(plotcmd, "\"");  /* user quotes are stripped */
		}
	}


	/* Open pipe; read data to buf; write buf to plot program */
	plotfp = epopen(plotcmd, "w");
	rewind(datafp);
	{ register int itr;
		for (itr = 0; itr < ntr; ++itr) {
			efread (trbuf, FSIZE, nt, datafp);
			efwrite(trbuf, FSIZE, nt, plotfp);
		}
	}


	/* Clean up */
	epclose(plotfp);
	efclose(datafp);


	return EXIT_SUCCESS;
}
Esempio n. 27
0
static void makeone (float **ts, float **as, float **sgs, 
	float **tg, float **ag, float **sgg, float ex, float ez, float dx, 
	float dz, float fx, float vs0, float vg0, int ls, Wavelet *w,
	int nr, Reflector *r, int nt, float dt, float ft, float *trace)
/*****************************************************************************
Make one synthetic seismogram 
******************************************************************************
Input:
**v		array[nx][nz] containing velocities 
nz		number of z samples
dz		z sampling interval
nx		number of x samples
dx		x sampling interval
fx		first x sample
ls		=1 for line source amplitudes; =0 for point source
w		wavelet to convolve with trace
xs		x coordinate of source
xg		x coordinate of receiver group
nr		number of reflectors
r		array[nr] of reflectors
nt		number of time samples
dt		time sampling interval
ft		first time sample

Output:
trace		array[nt] containing synthetic seismogram
*****************************************************************************/
{
	int it,ir,is,ns,ix,iz;
	float ar,ds,xd,zd,cd,sd,xi,zi,ci,cr,time,amp,sx,sz,
		tsd,asd,sgsd,tgd,agd,sggd,
		*temp;
	ReflectorSegment *rs;
	int lhd=LHD,nhd=NHD;
	static float hd[NHD];
	static int madehd=0;

	/* if half-derivative filter not yet made, make it */
	if (!madehd) {
		mkhdiff(dt,lhd,hd);
		madehd = 1;
	}
 
	/* zero trace */
	for (it=0; it<nt; ++it)
		trace[it] = 0.0;
	
	/* loop over reflectors */
	for (ir=0; ir<nr; ++ir) {

		/* amplitude, number of segments, segment length */
		ar = r[ir].a;
		ns = r[ir].ns;
		ds = r[ir].ds;
		rs = r[ir].rs;
	
		/* loop over diffracting segments */
		for (is=0; is<ns; ++is) {
		
			/* diffractor midpoint, unit-normal, and length */
			xd = rs[is].x;
			zd = rs[is].z;
			cd = rs[is].c;
			sd = rs[is].s;
			
			/* check range of reflector */
			if(xd<fx || xd>=ex || zd>=ez)
				continue;
			/* determine sample indices */
			xi = (xd-fx)/dx;
			ix = xi;
			zi = zd/dz;
			iz = zi;
			/* bilinear interpolation */
			sx = xi-ix;
			sz = zi-iz;
			tsd = (1.0-sz)*((1.0-sx)*ts[ix][iz] + 
						sx*ts[ix+1][iz]) +
					sz*((1.0-sx)*ts[ix][iz+1] +
						sx*ts[ix+1][iz+1]);
			asd = (1.0-sz)*((1.0-sx)*as[ix][iz] + 
						sx*as[ix+1][iz]) +
					sz*((1.0-sx)*as[ix][iz+1] +
						sx*as[ix+1][iz+1]);
			sgsd = (1.0-sz)*((1.0-sx)*sgs[ix][iz] + 
						sx*sgs[ix+1][iz]) +
					sz*((1.0-sx)*sgs[ix][iz+1] +
						sx*sgs[ix+1][iz+1]);
			tgd = (1.0-sz)*((1.0-sx)*tg[ix][iz] + 
						sx*tg[ix+1][iz]) +
					sz*((1.0-sx)*tg[ix][iz+1] +
						sx*tg[ix+1][iz+1]);
			agd = (1.0-sz)*((1.0-sx)*ag[ix][iz] + 
						sx*ag[ix+1][iz]) +
					sz*((1.0-sx)*ag[ix][iz+1] +
						sx*ag[ix+1][iz+1]);
			sggd = (1.0-sz)*((1.0-sx)*sgg[ix][iz] + 
						sx*sgg[ix+1][iz]) +
					sz*((1.0-sx)*sgg[ix][iz+1] +
						sx*sgg[ix+1][iz+1]);
			
			/* cosines of incidence and reflection angles */
			ci = cd*cos(asd)+sd*sin(asd);
			cr = cd*cos(agd)+sd*sin(agd);

			/* two-way time and amplitude */
			time = tsd+tgd;

			if (ls)
			     amp = sqrt(vs0*vg0/(sgsd*sggd));
			else
			     amp = sqrt(vs0*vg0/(sgsd*sggd*(sgsd+sggd)));
					   
			amp *= ABS(ci+cr)*ar*ds;
		
			/* add sinc wavelet to trace */
			addsinc(time,amp,nt,dt,ft,trace);
		}
	}
	
	/* allocate workspace */
	temp = ealloc1float(nt);
	
	/* apply half-derivative filter to trace */
	conv(nhd,-lhd,hd,nt,0,trace,nt,0,temp);

	/* convolve wavelet with trace */
	conv(w->lw,w->iw,w->wv,nt,0,temp,nt,0,trace);
	
	/* free workspace */
	free1float(temp);
}
Esempio n. 28
0
int
main(int argc, char **argv)
{
	int nz;		/* numer of depth samples */
	int iz;		/* counter */
	int nt;		/* number of time samples */

	int nzpar;	/* number of getparred depth values for velocities */
	int nvpar;	/* number of getparred velocity values */
	int izpar;	/* counter */

	int verbose;	/* verbose flag, =0 silent, =1 chatty */

	float dz=0.0;	/* depth sampling interval */
	float fz=0.0;	/* first depth value */
	float dt=0.0;	/* time sampling interval for velocities */
	float ft=0.0;	/* first time value */
	float z=0.0;	/* depth values for times */
	float vmin=0.0;	/* minimum velocity */
	float vmax=0.0;	/* maximum velocity */

	float *zpar=NULL;	/* values of z getparred */
	float *vpar=NULL;	/* values of v getparred */
	float *vz=NULL;		/* v(z) velocity as a function of z */
	float *zt=NULL;		/* z(t) depth as a function of t */
	float *temp=NULL;	/* temporary storage array */
	char *vfile="";		/* name of the velocity file */

	/* hook up getpar */
	initargs(argc,argv);
	requestdoc(1);

	/* get time sampling from first header */
	if (!gettr(&tr)) err("can't get first trace");
	nz = tr.ns;

	/* get depth sampling */
	if (!getparfloat("dz",&dz)) dz = ((float) tr.d1);

	/* determine velocity function v(t) */
	vz = ealloc1float(nz);
	if (!getparstring("vfile",&vfile)) {
		nzpar = countparval("z");
		if (nzpar==0) nzpar = 1;
		zpar = ealloc1float(nzpar);
		if (!getparfloat("z",zpar)) zpar[0] = 0.0;
		nvpar = countparval("v");
		if (nvpar==0) nvpar = 1;
		if (nvpar!=nzpar)err("number of t and v values must be equal");
		vpar = ealloc1float(nvpar);
		if (!getparfloat("v",vpar)) vpar[0] = 1500.0;
		for (izpar=1; izpar<nzpar; ++izpar)
			if (zpar[izpar]<=zpar[izpar-1])
				err("zpar must increase monotonically");
		for (iz=0,z=0.0; iz<nz; ++iz,z+=dz)
			intlin(nzpar,zpar,vpar,vpar[0],vpar[nzpar-1],
				1,&z,&vz[iz]);
	} else { /* read from a file */
		if (fread(vz,sizeof(float),nz,fopen(vfile,"r"))!=nz)
			err("cannot read %d velocities from file %s",nz,vfile);
	}

	/* determine minimum and maximum velocities */
	for (iz=1,vmin=vmax=vz[0]; iz<nz; ++iz) {
		if (vz[iz]<vmin) vmin = vz[iz];
		if (vz[iz]>vmax) vmax = vz[iz];
	}

	/* get parameters */
	if (!getparfloat("dt",&dt)) dt = 2.0*dz/vmin;
	if (!getparfloat("ft",&ft)) ft = 2.0*ft/vz[0];
	if (!getparint("nt",&nt)) nt = 1+(nz-1)*dz*2.0/(dt*vmax);
	if (!getparint("verbose",&verbose)) verbose = 0;
	CHECK_NT("nt",nt);

	/* if requested, print time sampling, etc */
	if (verbose) {
		warn("Input:");
		warn("\tnumber of depth samples = %d",nz);
		warn("\tdepth sampling interval = %g",dz);
		warn("\tfirst depth sample = %g",fz);
		warn("Output:");
		warn("\tnumber of time samples = %d",nt);
		warn("\ttime sampling interval = %g",dt);
		warn("\tfirst time sample = %g",ft);
	}

	/* allocate workspace */
	zt = ealloc1float(nt);
	temp = ealloc1float(nz);

	/* make z(t) function */
	makezt(nz,dz,fz,vz,nt,dt,ft,zt);
	
	/* loop over traces */
	do {
		/* update header fields */
		tr.trid = TREAL;
		tr.ns = nt;
		tr.dt = dt*1000000.0;
		tr.f1 = ft;
		tr.d1 = 0.0;

		/* resample */
		memcpy((void *) temp, (const void *) tr.data,nz*sizeof(float));
		ints8r(nz,dz,fz,temp,0.0,0.0,nt,zt,tr.data);

		/* put this trace before getting another */
		puttr(&tr);

	} while(gettr(&tr));

	return(CWP_Exit());
}
Esempio n. 29
0
int main (int argc, char **argv) {

   char *coeff_x, *coeff_x2, *coeff_x3, file[BUFSIZ];
   cwp_Bool active = TRUE;
	
   struct GRD_HEADER grd_x, grd_x2, grd_x3;
   struct GMT_EDGEINFO edgeinfo_x, edgeinfo_x2, edgeinfo_x3;
   struct GMT_BCR bcr_x, bcr_x2, bcr_x3;

   short  check, verbose;
   int    nz, ntr, ns;
   double value, scale_factor, dz, x_loc, y_loc;
   double weight_x, weight_x2, weight_x3;
   double value_coeff_x, value_coeff_x2, value_coeff_x3, tr_sec, dt_sec;
   float  depth_input, amp_output, *tr_amp, *depth;
   register int k, n;

   initargs(argc, argv);
   argc = GMT_begin (argc, argv);

   if (!getparstring("coeff_x", &coeff_x)) {
      fprintf ( stderr, "Must supply Coefficient_X GMT grid (COEFF_X Parameter) --> exiting\n" );
      return EXIT_FAILURE;
   }

   if (!getparstring("coeff_x2", &coeff_x2)) {
      fprintf ( stderr, "Must supply Coefficient_X2 GMT grid (COEFF_X2 Parameter)--> exiting\n" );
      return EXIT_FAILURE;
   }

   if (!getparstring("coeff_x3", &coeff_x3)) {
      fprintf ( stderr, "Must supply Coefficient_X3 GMT grid (COEFF_X3 Parameter)--> exiting\n" );
      return EXIT_FAILURE;
   }

   if (!getparshort("verbose" , &verbose)) verbose = 0;
   if (!getpardouble("weight_x", &weight_x)) weight_x  = 1.0;
   if (!getpardouble("weight_x2", &weight_x2)) weight_x2  = 1.0;
   if (!getpardouble("weight_x3", &weight_x3)) weight_x3  = 1.0;

   if ( verbose ) {
      fprintf ( stderr, "\n" );
      fprintf ( stderr, "X1 Coefficient GMT grid file name = %s\n", coeff_x );
      fprintf ( stderr, "X2 Coefficient GMT grid file name = %s\n", coeff_x2 );
      fprintf ( stderr, "X3 Coefficient GMT grid file name = %s\n", coeff_x3 );
      fprintf ( stderr, "X1 Grid Weighting Value = %f\n", weight_x );
      fprintf ( stderr, "X2 Grid Weighting Value = %f\n", weight_x2 );
      fprintf ( stderr, "X3 Grid Weighting Value = %f\n", weight_x3 );
      fprintf ( stderr, "\n" );
   }

   weight_x  = 1.0 / weight_x;
   weight_x2 = 1.0 / weight_x2;
   weight_x3 = 1.0 / weight_x3;

   GMT_boundcond_init (&edgeinfo_x);
   GMT_boundcond_init (&edgeinfo_x2);
   GMT_boundcond_init (&edgeinfo_x3);

   GMT_grd_init (&grd_x,  argc, argv, FALSE);
   GMT_grd_init (&grd_x2, argc, argv, FALSE);
   GMT_grd_init (&grd_x3, argc, argv, FALSE);

   if (GMT_read_grd_info (coeff_x,  &grd_x))  fprintf (stderr, "%s: Error opening file %s\n", GMT_program, file);
   if (GMT_read_grd_info (coeff_x2, &grd_x2)) fprintf (stderr, "%s: Error opening file %s\n", GMT_program, file);
   if (GMT_read_grd_info (coeff_x3, &grd_x3)) fprintf (stderr, "%s: Error opening file %s\n", GMT_program, file);
		
   f1 = (float *) GMT_memory (VNULL, (size_t)((grd_x.nx  + 4) * (grd_x.ny  + 4)), sizeof(float), GMT_program);
   f2 = (float *) GMT_memory (VNULL, (size_t)((grd_x2.nx + 4) * (grd_x2.ny + 4)), sizeof(float), GMT_program);
   f3 = (float *) GMT_memory (VNULL, (size_t)((grd_x3.nx + 4) * (grd_x3.ny + 4)), sizeof(float), GMT_program);

   GMT_pad[0] = GMT_pad[1] = GMT_pad[2] = GMT_pad[3] = 2;

   GMT_boundcond_param_prep (&grd_x,  &edgeinfo_x);
   GMT_boundcond_param_prep (&grd_x2, &edgeinfo_x2);
   GMT_boundcond_param_prep (&grd_x3, &edgeinfo_x3);

   GMT_boundcond_set (&grd_x,  &edgeinfo_x,  GMT_pad, f1);
   GMT_boundcond_set (&grd_x2, &edgeinfo_x2, GMT_pad, f2);
   GMT_boundcond_set (&grd_x3, &edgeinfo_x3, GMT_pad, f3);

   value = 0.0;
   GMT_bcr_init (&grd_x,  GMT_pad, active, value, &bcr_x);
   GMT_bcr_init (&grd_x2, GMT_pad, active, value, &bcr_x2);
   GMT_bcr_init (&grd_x3, GMT_pad, active, value, &bcr_x3);

   GMT_read_grd (coeff_x,  &grd_x,  f1, 0.0, 0.0, 0.0, 0.0, GMT_pad, FALSE);
   GMT_read_grd (coeff_x2, &grd_x2, f2, 0.0, 0.0, 0.0, 0.0, GMT_pad, FALSE);
   GMT_read_grd (coeff_x3, &grd_x3, f3, 0.0, 0.0, 0.0, 0.0, GMT_pad, FALSE);

   /* Get info from first trace */
   ntr     = gettra (&tr, 0);
   ns      = tr.ns;
   dt_sec  = tr.dt * 0.000001;
   scale_factor = tr.scalco;
   if (scale_factor < 0.0 ) scale_factor *= -1.0;
   if (scale_factor == 0.0 ) scale_factor = 1.0;

   if (!getpardouble ("dz",&dz)) dz = 2.0;
   if (!getparint    ("nz",&nz)) nz = ns;

   if ( verbose ) {
      fprintf ( stderr, "Output depth sample rate = %f\n", dz );
      fprintf ( stderr, "Coordinate scale factor = %f\n", scale_factor );
      fprintf ( stderr, "Number of output depth samples per trace = %d\n", nz );
      fprintf ( stderr, "number of traces = %d, number of samples per trace = %d\n", ntr, ns );
      fprintf ( stderr, "time sample rate (seconds) = %f\n", dt_sec );
   }

   rewind (stdin);

   depth  = ealloc1float ( ns );
   tr_amp = ealloc1float ( nz );

   /* Main loop over traces */
   for ( k = 0; k < ntr; ++k ) {
      gettr (&tr);
      x_loc = tr.sx / scale_factor;
      y_loc = tr.sy / scale_factor;

      check = 0;
      if ( x_loc >= grd_x.x_min && x_loc <= grd_x.x_max && y_loc >= grd_x.y_min && y_loc <= grd_x.y_max ) check = 1;

      if ( check ) {
         value_coeff_x  = GMT_get_bcr_z (&grd_x,  x_loc, y_loc, f1, &edgeinfo_x,  &bcr_x);
         value_coeff_x2 = GMT_get_bcr_z (&grd_x2, x_loc, y_loc, f2, &edgeinfo_x2, &bcr_x2);
         value_coeff_x3 = GMT_get_bcr_z (&grd_x3, x_loc, y_loc, f3, &edgeinfo_x3, &bcr_x3);

	 if ( verbose ) fprintf ( stderr, "Trace num = %d, X-Loc = %f, Y-Loc = %f, X Coefficient = %0.10f, X2 Coefficient = %0.10f, X3 Coefficient = %0.10f\n", 
         k+1, x_loc, y_loc, value_coeff_x, value_coeff_x2, value_coeff_x3 );

	 for ( n=0; n < ns; ++n ) {
            tr_amp[n] = tr.data[n];
	    tr_sec   = n * dt_sec;
	    depth[n] = (((value_coeff_x*tr_sec)*weight_x) + ((value_coeff_x2*pow(tr_sec,2))*weight_x2) + ((value_coeff_x3*pow(tr_sec,3))*weight_x3)) * -1.0;
            if ( verbose == 2 ) fprintf ( stderr, "Trace no. = %5d, Sample = %5d, TWT (secs.) = %.4f, Depth (feet) = %.4f\n", k, n, tr_sec, depth[n] ); 
	 }
	 for ( n=0; n < nz; ++n ) {
	    depth_input = n * dz;
	    intlin ( ns, depth, tr_amp, tr_amp[0], tr_amp[ns-1], 1, &depth_input, &amp_output );
	    dtr.data[n] = amp_output; 
         }
	 dtr.tracl  = tr.tracl;
	 dtr.tracr  = tr.tracr;
	 dtr.ep     = tr.ep;
	 dtr.ns     = nz;
	 dtr.dt     = nint (dz * 1000.0);
	 dtr.sx     = tr.sx;
	 dtr.sy     = tr.sy;
	 dtr.trid   = 1;
	 dtr.fldr   = tr.fldr;
	 dtr.cdp    = tr.cdp ;
	 puttr (&dtr);
      } else {
         fprintf ( stderr, "input trace = %d, xloc = %.0f yloc = %.0f is out of bounds\n", k, x_loc, y_loc);
      }
   }

   GMT_free ((void *)f1);
   GMT_free ((void *)f2);
   GMT_free ((void *)f3);
   GMT_end  (argc, argv);

   free1float (depth);
   free1float (tr_amp);

   return (0);
}
Esempio n. 30
0
main(int argc, char **argv)
{
	int nt;			/* number of points on trace		*/
	float dt;		/* time sample interval (sec)		*/
	float *wiener;		/* Wiener error filter coefficients	*/
	float pnoise;		/* pef additive noise level		*/
	float minlag;		/* start of error filter (sec)		*/
	int iminlag;		/* ... in samples			*/
	float maxlag;		/* end of error filter (sec)		*/
	int imaxlag;		/* ... in samples			*/
	int nlag;		/* length of error filter in samples	*/
	int ncorr;		/* length of corr window in samples	*/
	float *crosscorr;	/* right hand side of Wiener eqs	*/
	float *autocorr;	/* vector of autocorrelations		*/
	float *spiker;		/* spiking decon filter			*/
	float mincorr;		/* start time of correlation window	*/
	int imincorr;		/* .. in samples			*/
	float maxcorr;		/* end time of correlation window	*/
	int imaxcorr;		/* .. in samples			*/
	int showspiker;		/* flag to display spiking filter	*/
	int showwiener;		/* flag to display pred. error filter	*/



	/* Initialize */
	initargs(argc, argv);
	askdoc(1);


	/* Get info from first trace */ 
	if (!gettr(&intrace)) err("can't get first trace");
	nt = intrace.ns;
	dt = (float)intrace.dt/1000000.0; if (!dt) MUSTGETPARFLOAT ("dt", &dt);


	/* Get parameters */
	if (!getparint("showwiener",  &showwiener))	showwiener = 0;
	if (!getparint("showspiker",  &showspiker))	showspiker = 0;

	if (!getparfloat("pnoise",  &pnoise))	pnoise = PNOISE;

	if (getparfloat("minlag", &minlag))	iminlag = NINT(minlag/dt);
	else					iminlag = 1;
	if (iminlag < 1) err("minlag=%g too small", minlag);

	if (getparfloat("maxlag", &maxlag))	imaxlag = NINT(maxlag/dt);
	else					imaxlag = NINT(0.05 * nt);
	if (imaxlag >= nt) err("maxlag=%g too large", maxlag);
	
	if (iminlag >= imaxlag)
		err("minlag=%g, maxlag=%g", minlag, maxlag);
	
	if (getparfloat("mincorr", &mincorr))	imincorr = NINT(mincorr/dt);
	else					imincorr = 0;
	if (imincorr < 0) err("mincorr=%g too small", mincorr);
	
	if (getparfloat("maxcorr", &maxcorr))	imaxcorr = NINT(maxcorr/dt);
	else					imaxcorr = nt-1;
	if (imaxcorr >= nt) err("maxcorr=%g too large", maxcorr);

	if (imincorr >= imaxcorr)
		err("mincorr=%g, maxcorr=%g", mincorr, maxcorr);
	
	nlag  = imaxlag - iminlag + 1;
	ncorr = imaxcorr - imincorr + 1;


	/* Allocate memory */
	wiener	 = ealloc1float(nlag);
	spiker	 = ealloc1float(nlag);
	autocorr = ealloc1float(imaxlag);


	/* Set pointer to "cross" correlation */
	crosscorr = autocorr + iminlag;



	/* Main loop over traces */
	do {
		static int itr = 0;
		++itr;

		/* Form autocorrelation vector */
		xcor(ncorr, imincorr, intrace.data,
		     ncorr, imincorr, intrace.data,
		     imaxlag, 0, autocorr);


		/* Leave trace alone if autocorr[0] vanishes */
		if (autocorr[0] == 0.0) {
			puttr(&intrace);
			if (showwiener)
				warn("NO Wiener filter, trace: %d", itr);
			if (showspiker)
				warn("NO spiking decon filter, trace: %d", itr);

			continue;
		}


		/* Whiten */
		autocorr[0] *= 1.0 + pnoise;


		/* Get inverse filter by Wiener-Levinson */
		stoepf(nlag, autocorr, crosscorr, wiener, spiker);
		

		/* Convolve pefilter with trace - don't do zero multiplies */
		{ register int i;
		  for (i = 0; i < nt; ++i) {
			register int j;
			register int n = MIN(i, imaxlag); 
			register float sum = intrace.data[i];

			for (j = iminlag; j <= n; ++j)
				sum -= wiener[j-iminlag] * intrace.data[i-j];

			outtrace.data[i] = sum;
		  }
		}


		/* Output filtered trace */
		memcpy((char*)&outtrace, (char*)&intrace, HDRBYTES);
		puttr(&outtrace);


		/* Show pefilter and/or spiker on request */
		if (showwiener) {
			register int i;
			warn("Wiener filter, trace: %d", itr);
			for (i = 0; i < imaxlag; ++i)
				fprintf(stderr, "%10g%c", wiener[i],
					(i%6==5 || i==nlag-1) ? '\n' : ' ');
		}
		
		if (showspiker) {
			register int i;
			warn("spiking decon filter, trace: %d", itr);
			for (i = 0; i < nlag; ++i)
				fprintf(stderr, "%10g%c", spiker[i],
					(i%6==5 || i==nlag-1) ? '\n' : ' ');
		}

	} while (gettr(&intrace));


	return EXIT_SUCCESS;
}