static void print_eeconfig(void)
{
print("default_layer: "); print_dec(eeconfig_read_default_layer()); print("\n");
debug_config_t dc;
dc.raw = eeconfig_read_debug();
print("debug_config.raw: "); print_hex8(dc.raw); print("\n");
print(".enable: "); print_dec(dc.enable); print("\n");
print(".matrix: "); print_dec(dc.matrix); print("\n");
print(".keyboard: "); print_dec(dc.keyboard); print("\n");
print(".mouse: "); print_dec(dc.mouse); print("\n");
keymap_config_t kc;
kc.raw = eeconfig_read_keymap();
print("keymap_config.raw: "); print_hex8(kc.raw); print("\n");
print(".swap_control_capslock: "); print_dec(kc.swap_control_capslock); print("\n");
print(".capslock_to_control: "); print_dec(kc.capslock_to_control); print("\n");
print(".swap_lalt_lgui: "); print_dec(kc.swap_lalt_lgui); print("\n");
print(".swap_ralt_rgui: "); print_dec(kc.swap_ralt_rgui); print("\n");
print(".no_gui: "); print_dec(kc.no_gui); print("\n");
print(".swap_grave_esc: "); print_dec(kc.swap_grave_esc); print("\n");
print(".swap_backslash_backspace: "); print_dec(kc.swap_backslash_backspace); print("\n");
#ifdef BACKLIGHT_ENABLE
backlight_config_t bc;
bc.raw = eeconfig_read_backlight();
print("backlight_config.raw: "); print_hex8(bc.raw); print("\n");
print(".enable: "); print_dec(bc.enable); print("\n");
print(".level: "); print_dec(bc.level); print("\n");
#endif
}
void matrix_init_user(void) {
// This keymap only has a single base layer, so reset the default if needed
if(eeconfig_read_default_layer() > 1){
eeconfig_update_default_layer(1);
default_layer_set(1);
}
}
// Call user matrix init, set default RGB colors and then
// call the keymap's init function
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
uint8_t default_layer = eeconfig_read_default_layer();
rgblight_enable();
if (true) {
if (default_layer & (1UL << _COLEMAK)) {
rgblight_set_magenta;
}
else if (default_layer & (1UL << _DVORAK)) {
rgblight_set_green;
}
else if (default_layer & (1UL << _WORKMAN)) {
rgblight_set_purple;
}
else {
rgblight_set_teal;
}
}
else
{
rgblight_set_red;
rgblight_mode(5);
}
#endif
#ifdef AUDIO_ENABLE
// wait_ms(21); // gets rid of tick
// stop_all_notes();
// PLAY_SONG(tone_hackstartup);
#endif
matrix_init_keymap();
}
// Set LED according to the default layer
void default_layer_led_set(void) {
switch (biton32(eeconfig_read_default_layer())) {
case COLEMAK:
// LED2 for COLEMAK
ergodox_right_led_2_on();
break;
case QWERTY:
// LED3 for QWERTY
ergodox_right_led_3_on();
break;
};
};
void magic(void)
{
/* check signature */
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
/* debug enable */
debug_config.raw = eeconfig_read_debug();
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
uint8_t default_layer = 0;
default_layer = eeconfig_read_default_layer();
default_layer_set((uint32_t)default_layer);
}
void keyboard_post_init_rgb(void) {
#ifdef RGBLIGHT_ENABLE
if (userspace_config.rgb_layer_change) {
rgblight_enable_noeeprom();
switch (biton32(eeconfig_read_default_layer())) {
case _COLEMAK:
rgblight_sethsv_noeeprom_magenta(); break;
case _DVORAK:
rgblight_sethsv_noeeprom_springgreen(); break;
case _WORKMAN:
rgblight_sethsv_noeeprom_goldenrod(); break;
default:
rgblight_sethsv_noeeprom_cyan(); break;
}
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
}
#endif
}
static void print_eeconfig(void)
{
// Print these variables if NO_PRINT or USER_PRINT are not defined.
#if !defined(NO_PRINT) && !defined(USER_PRINT)
print("default_layer: "); print_dec(eeconfig_read_default_layer()); print("\n");
debug_config_t dc;
dc.raw = eeconfig_read_debug();
print("debug_config.raw: "); print_hex8(dc.raw); print("\n");
print(".enable: "); print_dec(dc.enable); print("\n");
print(".matrix: "); print_dec(dc.matrix); print("\n");
print(".keyboard: "); print_dec(dc.keyboard); print("\n");
print(".mouse: "); print_dec(dc.mouse); print("\n");
keymap_config_t kc;
kc.raw = eeconfig_read_keymap();
print("keymap_config.raw: "); print_hex8(kc.raw); print("\n");
print(".swap_control_capslock: "); print_dec(kc.swap_control_capslock); print("\n");
print(".capslock_to_control: "); print_dec(kc.capslock_to_control); print("\n");
print(".swap_lalt_lgui: "); print_dec(kc.swap_lalt_lgui); print("\n");
print(".swap_ralt_rgui: "); print_dec(kc.swap_ralt_rgui); print("\n");
print(".no_gui: "); print_dec(kc.no_gui); print("\n");
print(".swap_grave_esc: "); print_dec(kc.swap_grave_esc); print("\n");
print(".swap_backslash_backspace: "); print_dec(kc.swap_backslash_backspace); print("\n");
print(".nkro: "); print_dec(kc.nkro); print("\n");
#ifdef BACKLIGHT_ENABLE
backlight_config_t bc;
bc.raw = eeconfig_read_backlight();
print("backlight_config.raw: "); print_hex8(bc.raw); print("\n");
print(".enable: "); print_dec(bc.enable); print("\n");
print(".level: "); print_dec(bc.level); print("\n");
#endif /* BACKLIGHT_ENABLE */
#endif /* !NO_PRINT */
}
void matrix_init_rgb(void) {
#ifdef INDICATOR_LIGHTS
current_mod = last_mod = get_mods();
current_led = last_led = host_keyboard_leds();
current_osm = last_osm = get_oneshot_mods();
#endif
if (userspace_config.rgb_layer_change) {
rgblight_enable_noeeprom();
switch (biton32(eeconfig_read_default_layer())) {
case _COLEMAK:
rgblight_sethsv_noeeprom_magenta(); break;
case _DVORAK:
rgblight_sethsv_noeeprom_springgreen(); break;
case _WORKMAN:
rgblight_sethsv_noeeprom_goldenrod(); break;
default:
rgblight_sethsv_noeeprom_cyan(); break;
}
rgblight_mode_noeeprom(1);
}
}
// Runs state check and changes underglow color and animation
// on layer change, no matter where the change was initiated
// Then runs keymap's layer change check
uint32_t layer_state_set_user(uint32_t state) {
#ifdef RGBLIGHT_ENABLE
uint8_t default_layer = eeconfig_read_default_layer();
if (rgb_layer_change) {
switch (biton32(state)) {
case _NAV:
rgblight_set_blue;
rgblight_mode(1);
break;
case _SYMB:
rgblight_set_blue;
rgblight_mode(2);
break;
case _MOUS:
rgblight_set_yellow;
rgblight_mode(1);
break;
case _MACROS:
rgblight_set_orange;
is_overwatch ? rgblight_mode(17) : rgblight_mode(18);
break;
case _MEDIA:
rgblight_set_green;
rgblight_mode(22);
break;
case _GAMEPAD:
rgblight_set_orange;
rgblight_mode(17);
break;
case _DIABLO:
rgblight_set_red;
rgblight_mode(5);
break;
case _RAISE:
rgblight_set_yellow;
rgblight_mode(5);
break;
case _LOWER:
rgblight_set_orange;
rgblight_mode(5);
break;
case _ADJUST:
rgblight_set_red;
rgblight_mode(23);
break;
case _COVECUBE:
rgblight_set_green;
rgblight_mode(2);
break;
default:
if (default_layer & (1UL << _COLEMAK)) {
rgblight_set_magenta;
}
else if (default_layer & (1UL << _DVORAK)) {
rgblight_set_green;
}
else if (default_layer & (1UL << _WORKMAN)) {
rgblight_set_purple;
}
else {
rgblight_set_teal;
}
rgblight_mode(1);
break;
}
}
#endif
return layer_state_set_keymap (state);
}
void bootmagic(void)
{
/* check signature */
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
/* do scans in case of bounce */
print("bootmagic scan: ... ");
uint8_t scan = 100;
while (scan--) { matrix_scan(); wait_ms(10); }
print("done.\n");
/* bootmagic skip */
if (bootmagic_scan_key(BOOTMAGIC_KEY_SKIP)) {
return;
}
/* eeconfig clear */
if (bootmagic_scan_key(BOOTMAGIC_KEY_EEPROM_CLEAR)) {
eeconfig_init();
#ifdef KEYMAP_IN_EEPROM_ENABLE
write_keymap_to_eeprom();
#endif
#ifdef LEDMAP_IN_EEPROM_ENABLE
write_ledmap_to_eeprom();
#endif
}
/* bootloader */
if (bootmagic_scan_key(BOOTMAGIC_KEY_BOOTLOADER)) {
bootloader_jump();
}
/* user-defined checks */
hook_bootmagic();
/* debug enable */
debug_config.raw = eeconfig_read_debug();
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEBUG_ENABLE)) {
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEBUG_MATRIX)) {
debug_config.matrix = !debug_config.matrix;
} else if (bootmagic_scan_key(BOOTMAGIC_KEY_DEBUG_KEYBOARD)) {
debug_config.keyboard = !debug_config.keyboard;
} else if (bootmagic_scan_key(BOOTMAGIC_KEY_DEBUG_MOUSE)) {
debug_config.mouse = !debug_config.mouse;
} else {
debug_config.enable = !debug_config.enable;
}
}
eeconfig_write_debug(debug_config.raw);
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
if (bootmagic_scan_key(BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK)) {
keymap_config.swap_control_capslock = !keymap_config.swap_control_capslock;
}
if (bootmagic_scan_key(BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL)) {
keymap_config.capslock_to_control = !keymap_config.capslock_to_control;
}
if (bootmagic_scan_key(BOOTMAGIC_KEY_SWAP_LALT_LGUI)) {
keymap_config.swap_lalt_lgui = !keymap_config.swap_lalt_lgui;
}
if (bootmagic_scan_key(BOOTMAGIC_KEY_SWAP_RALT_RGUI)) {
keymap_config.swap_ralt_rgui = !keymap_config.swap_ralt_rgui;
}
if (bootmagic_scan_key(BOOTMAGIC_KEY_NO_GUI)) {
keymap_config.no_gui = !keymap_config.no_gui;
}
if (bootmagic_scan_key(BOOTMAGIC_KEY_SWAP_GRAVE_ESC)) {
keymap_config.swap_grave_esc = !keymap_config.swap_grave_esc;
}
if (bootmagic_scan_key(BOOTMAGIC_KEY_SWAP_BACKSLASH_BACKSPACE)) {
keymap_config.swap_backslash_backspace = !keymap_config.swap_backslash_backspace;
}
if (bootmagic_scan_key(BOOTMAGIC_HOST_NKRO)) {
keymap_config.nkro = !keymap_config.nkro;
}
eeconfig_write_keymap(keymap_config.raw);
#ifdef NKRO_ENABLE
keyboard_nkro = keymap_config.nkro;
#endif
/* default layer */
uint8_t default_layer = 0;
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_0)) { default_layer |= (1<<0); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_1)) { default_layer |= (1<<1); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_2)) { default_layer |= (1<<2); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_3)) { default_layer |= (1<<3); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_4)) { default_layer |= (1<<4); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_5)) { default_layer |= (1<<5); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_6)) { default_layer |= (1<<6); }
if (bootmagic_scan_key(BOOTMAGIC_KEY_DEFAULT_LAYER_7)) { default_layer |= (1<<7); }
if (default_layer) {
eeconfig_write_default_layer(default_layer);
default_layer_set((uint32_t)default_layer);
} else {
default_layer = eeconfig_read_default_layer();
default_layer_set((uint32_t)default_layer);
}
}
void matrix_scan_user(void) { // runs frequently to update info
uint8_t modifiders = get_mods();
uint8_t layer = biton32(layer_state);
static bool has_layer_changed = true;
if (!skip_leds) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
// Since we're not using the LEDs here for layer indication anymore,
// then lets use them for modifier indicators. Shame we don't have 4...
// Also, no "else", since we want to know each, independantly.
if ( modifiders & MODS_SHIFT_MASK) {
ergodox_right_led_2_on();
}
if ( modifiders & MODS_CTRL_MASK) {
ergodox_right_led_1_on();
}
if ( modifiders & MODS_ALT_MASK) {
ergodox_right_led_3_on();
}
}
if (layer != current_layer) {
has_layer_changed = true;
current_layer = layer;
}
// Check layer, and apply color if its changed since last check
if (has_layer_changed) {
uint8_t default_layer = 0;
default_layer = eeconfig_read_default_layer();
switch (layer) {
case SYMB:
rgblight_set_blue;
rgblight_mode(2);
break;
case OVERWATCH:
rgblight_set_orange;
rgblight_mode(17);
break;
case DIABLO:
rgblight_set_red;
rgblight_mode(5);
break;
case MOUS:
rgblight_set_urine;
rgblight_mode(1);
break;
case 7:
rgblight_sethsv (255,255,255);
rgblight_mode(1);
break;
default:
if (default_layer & (1UL << COLEMAK)) {
rgblight_set_green;
}
else if (default_layer & (1UL << DVORAK)) {
rgblight_set_magenta;
}
else if (default_layer & (1UL << WORKMAN)) {
rgblight_set_purple;
}
else {
rgblight_set_teal;
}
rgblight_mode(1);
break;
}
has_layer_changed = false;
}
// Run Diablo 3 macro checking code.
run_diablo_macro_check();
#ifdef LEADER_KEYS
LEADER_DICTIONARY() {
leading = false;
leader_end();
SEQ_ONE_KEY(KC_C) {
SEND_STRING("Covecube");
}
SEQ_TWO_KEYS(KC_S, KC_D) {
SEND_STRING("StableBit DrivePool");
}
SEQ_TWO_KEYS(KC_C, KC_D) {
SEND_STRING("StableBit CloudDrive");
}