/* * Write out process accounting information, on process exit. * Data to be written out is specified in Leffler, et al. * and are enumerated below. (They're also noted in the system * "acct.h" header file.) */ int acct_process(struct proc *p) { struct acct acct; struct process *pr = p->p_p; struct rusage *r; struct timespec ut, st, tmp; int t; struct vnode *vp; int error; /* If accounting isn't enabled, don't bother */ vp = acctp; if (vp == NULL) return (0); /* * Get process accounting information. */ /* (1) The name of the command that ran */ memcpy(acct.ac_comm, p->p_comm, sizeof acct.ac_comm); /* (2) The amount of user and system time that was used */ calctsru(&pr->ps_tu, &ut, &st, NULL); acct.ac_utime = encode_comp_t(ut.tv_sec, ut.tv_nsec); acct.ac_stime = encode_comp_t(st.tv_sec, st.tv_nsec); /* (3) The elapsed time the command ran (and its starting time) */ acct.ac_btime = pr->ps_start.tv_sec; getnanotime(&tmp); timespecsub(&tmp, &pr->ps_start, &tmp); acct.ac_etime = encode_comp_t(tmp.tv_sec, tmp.tv_nsec); /* (4) The average amount of memory used */ r = &p->p_ru; timespecadd(&ut, &st, &tmp); t = tmp.tv_sec * hz + tmp.tv_nsec / (1000 * tick); if (t) acct.ac_mem = (r->ru_ixrss + r->ru_idrss + r->ru_isrss) / t; else acct.ac_mem = 0; /* (5) The number of disk I/O operations done */ acct.ac_io = encode_comp_t(r->ru_inblock + r->ru_oublock, 0); /* (6) The UID and GID of the process */ acct.ac_uid = pr->ps_ucred->cr_ruid; acct.ac_gid = pr->ps_ucred->cr_rgid; /* (7) The terminal from which the process was started */ if ((pr->ps_flags & PS_CONTROLT) && pr->ps_pgrp->pg_session->s_ttyp) acct.ac_tty = pr->ps_pgrp->pg_session->s_ttyp->t_dev; else acct.ac_tty = NODEV; /* (8) The boolean flags that tell how the process terminated, etc. */ acct.ac_flag = pr->ps_acflag; /* * Now, just write the accounting information to the file. */ error = vn_rdwr(UIO_WRITE, vp, (caddr_t)&acct, sizeof (acct), (off_t)0, UIO_SYSSPACE, IO_APPEND|IO_UNIT|IO_NOLIMIT, p->p_ucred, NULL, p); return error; }
/* * Write out process accounting information, on process exit. * Data to be written out is specified in Leffler, et al. * and are enumerated below. (They're also noted in the system * "acct.h" header file.) */ int acct_process(struct proc *p) { struct acct acct; struct process *pr = p->p_p; struct rusage *r; struct timeval ut, st, tmp; int t; struct vnode *vp; struct plimit *oplim = NULL; int error; /* If accounting isn't enabled, don't bother */ vp = acctp; if (vp == NULL) return (0); /* * Raise the file limit so that accounting can't be stopped by the * user. (XXX - we should think about the cpu limit too). */ if (pr->ps_limit->p_refcnt > 1) { oplim = pr->ps_limit; pr->ps_limit = limcopy(pr->ps_limit); } p->p_rlimit[RLIMIT_FSIZE].rlim_cur = RLIM_INFINITY; /* * Get process accounting information. */ /* (1) The name of the command that ran */ bcopy(p->p_comm, acct.ac_comm, sizeof acct.ac_comm); /* (2) The amount of user and system time that was used */ calcru(&pr->ps_tu, &ut, &st, NULL); acct.ac_utime = encode_comp_t(ut.tv_sec, ut.tv_usec); acct.ac_stime = encode_comp_t(st.tv_sec, st.tv_usec); /* (3) The elapsed time the command ran (and its starting time) */ acct.ac_btime = pr->ps_start.tv_sec; getmicrotime(&tmp); timersub(&tmp, &pr->ps_start, &tmp); acct.ac_etime = encode_comp_t(tmp.tv_sec, tmp.tv_usec); /* (4) The average amount of memory used */ r = &p->p_ru; timeradd(&ut, &st, &tmp); t = tmp.tv_sec * hz + tmp.tv_usec / tick; if (t) acct.ac_mem = (r->ru_ixrss + r->ru_idrss + r->ru_isrss) / t; else acct.ac_mem = 0; /* (5) The number of disk I/O operations done */ acct.ac_io = encode_comp_t(r->ru_inblock + r->ru_oublock, 0); /* (6) The UID and GID of the process */ acct.ac_uid = p->p_cred->p_ruid; acct.ac_gid = p->p_cred->p_rgid; /* (7) The terminal from which the process was started */ if ((pr->ps_flags & PS_CONTROLT) && pr->ps_pgrp->pg_session->s_ttyp) acct.ac_tty = pr->ps_pgrp->pg_session->s_ttyp->t_dev; else acct.ac_tty = NODEV; /* (8) The boolean flags that tell how the process terminated, etc. */ acct.ac_flag = pr->ps_acflag; /* * Now, just write the accounting information to the file. */ error = vn_rdwr(UIO_WRITE, vp, (caddr_t)&acct, sizeof (acct), (off_t)0, UIO_SYSSPACE, IO_APPEND|IO_UNIT, p->p_ucred, NULL, p); if (oplim) { limfree(pr->ps_limit); pr->ps_limit = oplim; } return error; }
/* * Write out process accounting information, on process exit. * Data to be written out is specified in Leffler, et al. * and are enumerated below. (They're also noted in the system * "acct.h" header file.) */ int acct_process(proc_t p) { struct acct an_acct; struct rusage rup, *r; struct timeval ut, st, tmp; int t; int error; struct vnode *vp; kauth_cred_t safecred; struct session * sessp; boolean_t fstate; /* If accounting isn't enabled, don't bother */ vp = acctp; if (vp == NULLVP) return (0); /* * Get process accounting information. */ /* (1) The name of the command that ran */ bcopy(p->p_comm, an_acct.ac_comm, sizeof an_acct.ac_comm); /* (2) The amount of user and system time that was used */ calcru(p, &ut, &st, NULL); an_acct.ac_utime = encode_comp_t(ut.tv_sec, ut.tv_usec); an_acct.ac_stime = encode_comp_t(st.tv_sec, st.tv_usec); /* (3) The elapsed time the commmand ran (and its starting time) */ an_acct.ac_btime = p->p_start.tv_sec; microtime(&tmp); timevalsub(&tmp, &p->p_start); an_acct.ac_etime = encode_comp_t(tmp.tv_sec, tmp.tv_usec); /* (4) The average amount of memory used */ proc_lock(p); rup = p->p_stats->p_ru; proc_unlock(p); r = &rup; tmp = ut; timevaladd(&tmp, &st); t = tmp.tv_sec * hz + tmp.tv_usec / tick; if (t) an_acct.ac_mem = (r->ru_ixrss + r->ru_idrss + r->ru_isrss) / t; else an_acct.ac_mem = 0; /* (5) The number of disk I/O operations done */ an_acct.ac_io = encode_comp_t(r->ru_inblock + r->ru_oublock, 0); /* (6) The UID and GID of the process */ safecred = kauth_cred_proc_ref(p); an_acct.ac_uid = safecred->cr_ruid; an_acct.ac_gid = safecred->cr_rgid; /* (7) The terminal from which the process was started */ sessp = proc_session(p); if ((p->p_flag & P_CONTROLT) && (sessp != SESSION_NULL) && (sessp->s_ttyp != TTY_NULL)) { fstate = thread_funnel_set(kernel_flock, TRUE); an_acct.ac_tty = sessp->s_ttyp->t_dev; (void) thread_funnel_set(kernel_flock, fstate); }else an_acct.ac_tty = NODEV; if (sessp != SESSION_NULL) session_rele(sessp); /* (8) The boolean flags that tell how the process terminated, etc. */ an_acct.ac_flag = p->p_acflag; /* * Now, just write the accounting information to the file. */ if ((error = vnode_getwithref(vp)) == 0) { error = vn_rdwr(UIO_WRITE, vp, (caddr_t)&an_acct, sizeof (an_acct), (off_t)0, UIO_SYSSPACE32, IO_APPEND|IO_UNIT, safecred, (int *)0, p); vnode_put(vp); } kauth_cred_unref(&safecred); return (error); }