/**
* et131x_close - Close the device
* @netdev: device to be closed
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*/
int et131x_close(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
DBG_ENTER(et131x_dbginfo);
/* First thing is to stop the queue */
netif_stop_queue(netdev);
/* Stop the Tx and Rx DMA engines */
et131x_rx_dma_disable(adapter);
et131x_tx_dma_disable(adapter);
/* Disable device interrupts */
et131x_disable_interrupts(adapter);
/* Deregistering ISR */
MP_CLEAR_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE);
DBG_TRACE(et131x_dbginfo, "Deregistering ISR...\n");
free_irq(netdev->irq, netdev);
/* Stop the error timer */
del_timer_sync(&adapter->ErrorTimer);
DBG_LEAVE(et131x_dbginfo);
return 0;
}
/**
* et131x_change_mtu - The handler called to change the MTU for the device
* @netdev: device whose MTU is to be changed
* @new_mtu: the desired MTU
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*/
int et131x_change_mtu(struct net_device *netdev, int new_mtu)
{
int result = 0;
struct et131x_adapter *adapter = netdev_priv(netdev);
/* Make sure the requested MTU is valid */
if (new_mtu < 64 || new_mtu > 9216)
return -EINVAL;
/* Stop the netif queue */
netif_stop_queue(netdev);
/* Stop the Tx and Rx DMA engines */
et131x_rx_dma_disable(adapter);
et131x_tx_dma_disable(adapter);
/* Disable device interrupts */
et131x_disable_interrupts(adapter);
et131x_handle_send_interrupt(adapter);
et131x_handle_recv_interrupt(adapter);
/* Set the new MTU */
netdev->mtu = new_mtu;
/* Free Rx DMA memory */
et131x_adapter_memory_free(adapter);
/* Set the config parameter for Jumbo Packet support */
adapter->RegistryJumboPacket = new_mtu + 14;
et131x_soft_reset(adapter);
/* Alloc and init Rx DMA memory */
result = et131x_adapter_memory_alloc(adapter);
if (result != 0) {
dev_warn(&adapter->pdev->dev,
"Change MTU failed; couldn't re-alloc DMA memory\n");
return result;
}
et131x_init_send(adapter);
et131x_hwaddr_init(adapter);
memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
/* Init the device with the new settings */
et131x_adapter_setup(adapter);
/* Enable interrupts */
if (adapter->Flags & fMP_ADAPTER_INTERRUPT_IN_USE)
et131x_enable_interrupts(adapter);
/* Restart the Tx and Rx DMA engines */
et131x_rx_dma_enable(adapter);
et131x_tx_dma_enable(adapter);
/* Restart the netif queue */
netif_wake_queue(netdev);
return result;
}
/**
* et131x_close - Close the device
* @netdev: device to be closed
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*/
int et131x_close(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
/* First thing is to stop the queue */
netif_stop_queue(netdev);
/* Stop the Tx and Rx DMA engines */
et131x_rx_dma_disable(adapter);
et131x_tx_dma_disable(adapter);
/* Disable device interrupts */
et131x_disable_interrupts(adapter);
/* Deregistering ISR */
adapter->Flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE;
free_irq(netdev->irq, netdev);
/* Stop the error timer */
del_timer_sync(&adapter->ErrorTimer);
return 0;
}
/**
* et131x_set_mac_addr - handler to change the MAC address for the device
* @netdev: device whose MAC is to be changed
* @new_mac: the desired MAC address
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*
* IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
*/
int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
{
int result = 0;
struct et131x_adapter *adapter = netdev_priv(netdev);
struct sockaddr *address = new_mac;
/* begin blux */
if (adapter == NULL)
return -ENODEV;
/* Make sure the requested MAC is valid */
if (!is_valid_ether_addr(address->sa_data))
return -EINVAL;
/* Stop the netif queue */
netif_stop_queue(netdev);
/* Stop the Tx and Rx DMA engines */
et131x_rx_dma_disable(adapter);
et131x_tx_dma_disable(adapter);
/* Disable device interrupts */
et131x_disable_interrupts(adapter);
et131x_handle_send_interrupt(adapter);
et131x_handle_recv_interrupt(adapter);
/* Set the new MAC */
/* netdev->set_mac_address = &new_mac; */
/* netdev->mtu = new_mtu; */
memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
printk(KERN_INFO "%s: Setting MAC address to %pM\n",
netdev->name, netdev->dev_addr);
/* Free Rx DMA memory */
et131x_adapter_memory_free(adapter);
/* Set the config parameter for Jumbo Packet support */
/* adapter->RegistryJumboPacket = new_mtu + 14; */
/* blux: not needet here, we'll change the MAC */
et131x_soft_reset(adapter);
/* Alloc and init Rx DMA memory */
result = et131x_adapter_memory_alloc(adapter);
if (result != 0) {
dev_err(&adapter->pdev->dev,
"Change MAC failed; couldn't re-alloc DMA memory\n");
return result;
}
et131x_init_send(adapter);
et131x_hwaddr_init(adapter);
/* Init the device with the new settings */
et131x_adapter_setup(adapter);
/* Enable interrupts */
if (adapter->Flags & fMP_ADAPTER_INTERRUPT_IN_USE)
et131x_enable_interrupts(adapter);
/* Restart the Tx and Rx DMA engines */
et131x_rx_dma_enable(adapter);
et131x_tx_dma_enable(adapter);
/* Restart the netif queue */
netif_wake_queue(netdev);
return result;
}
/**
* et131x_set_mac_addr - handler to change the MAC address for the device
* @netdev: device whose MAC is to be changed
* @new_mac: the desired MAC address
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*
* IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
*/
int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
{
int result = 0;
struct et131x_adapter *adapter = netdev_priv(netdev);
struct sockaddr *address = new_mac;
DBG_ENTER(et131x_dbginfo);
// begin blux
// DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" );
if (adapter == NULL) {
DBG_LEAVE(et131x_dbginfo);
return -ENODEV;
}
/* Make sure the requested MAC is valid */
if (!is_valid_ether_addr(address->sa_data)) {
DBG_LEAVE(et131x_dbginfo);
return -EINVAL;
}
/* Stop the netif queue */
netif_stop_queue(netdev);
/* Stop the Tx and Rx DMA engines */
et131x_rx_dma_disable(adapter);
et131x_tx_dma_disable(adapter);
/* Disable device interrupts */
et131x_disable_interrupts(adapter);
et131x_handle_send_interrupt(adapter);
et131x_handle_recv_interrupt(adapter);
/* Set the new MAC */
// netdev->set_mac_address = &new_mac;
// netdev->mtu = new_mtu;
memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
printk("%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
netdev->name, netdev->dev_addr[0], netdev->dev_addr[1],
netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4],
netdev->dev_addr[5]);
/* Free Rx DMA memory */
et131x_adapter_memory_free(adapter);
/* Set the config parameter for Jumbo Packet support */
// adapter->RegistryJumboPacket = new_mtu + 14;
// blux: not needet here, w'll change the MAC
et131x_soft_reset(adapter);
/* Alloc and init Rx DMA memory */
result = et131x_adapter_memory_alloc(adapter);
if (result != 0) {
DBG_WARNING(et131x_dbginfo,
"Change MAC failed; couldn't re-alloc DMA memory\n");
return result;
}
et131x_init_send(adapter);
et131x_setup_hardware_properties(adapter);
// memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN );
// blux: no, do not override our nice address
/* Init the device with the new settings */
et131x_adapter_setup(adapter);
/* Enable interrupts */
if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
et131x_enable_interrupts(adapter);
}
/* Restart the Tx and Rx DMA engines */
et131x_rx_dma_enable(adapter);
et131x_tx_dma_enable(adapter);
/* Restart the netif queue */
netif_wake_queue(netdev);
DBG_LEAVE(et131x_dbginfo);
return result;
}
