/*
* ex_aci --
* Append, change, insert in ex.
*/
static int
ex_aci(SCR *sp, EXCMD *cmdp, enum which cmd)
{
CHAR_T *p, *t;
GS *gp;
TEXT *tp;
TEXTH tiq;
db_recno_t cnt, lno;
size_t len;
u_int32_t flags;
int need_newline;
gp = sp->gp;
NEEDFILE(sp, cmdp);
/*
* If doing a change, replace lines for as long as possible. Then,
* append more lines or delete remaining lines. Changes to an empty
* file are appends, inserts are the same as appends to the previous
* line.
*
* !!!
* Set the address to which we'll append. We set sp->lno to this
* address as well so that autoindent works correctly when get text
* from the user.
*/
lno = cmdp->addr1.lno;
sp->lno = lno;
if ((cmd == CHANGE || cmd == INSERT) && lno != 0)
--lno;
/*
* !!!
* If the file isn't empty, cut changes into the unnamed buffer.
*/
if (cmd == CHANGE && cmdp->addr1.lno != 0 &&
(cut(sp, NULL, &cmdp->addr1, &cmdp->addr2, CUT_LINEMODE) ||
del(sp, &cmdp->addr1, &cmdp->addr2, 1)))
return (1);
/*
* !!!
* Anything that was left after the command separator becomes part
* of the inserted text. Apparently, it was common usage to enter:
*
* :g/pattern/append|stuff1
*
* and append the line of text "stuff1" to the lines containing the
* pattern. It was also historically legal to enter:
*
* :append|stuff1
* stuff2
* .
*
* and the text on the ex command line would be appended as well as
* the text inserted after it. There was an historic bug however,
* that the user had to enter *two* terminating lines (the '.' lines)
* to terminate text input mode, in this case. This whole thing
* could be taken too far, however. Entering:
*
* :append|stuff1\
* stuff2
* stuff3
* .
*
* i.e. mixing and matching the forms confused the historic vi, and,
* not only did it take two terminating lines to terminate text input
* mode, but the trailing backslashes were retained on the input. We
* match historic practice except that we discard the backslashes.
*
* Input lines specified on the ex command line lines are separated by
* <newline>s. If there is a trailing delimiter an empty line was
* inserted. There may also be a leading delimiter, which is ignored
* unless it's also a trailing delimiter. It is possible to encounter
* a termination line, i.e. a single '.', in a global command, but not
* necessary if the text insert command was the last of the global
* commands.
*/
if (cmdp->save_cmdlen != 0) {
for (p = cmdp->save_cmd,
len = cmdp->save_cmdlen; len > 0; p = t) {
for (t = p; len > 0 && t[0] != '\n'; ++t, --len);
if (t != p || len == 0) {
if (F_ISSET(sp, SC_EX_GLOBAL) &&
t - p == 1 && p[0] == '.') {
++t;
if (len > 0)
--len;
break;
}
if (db_append(sp, 1, lno++, p, t - p))
return (1);
}
if (len != 0) {
++t;
if (--len == 0 &&
db_append(sp, 1, lno++, NULL, 0))
return (1);
}
}
/*
* If there's any remaining text, we're in a global, and
* there's more command to parse.
*
* !!!
* We depend on the fact that non-global commands will eat the
* rest of the command line as text input, and before getting
* any text input from the user. Otherwise, we'd have to save
* off the command text before or during the call to the text
* input function below.
*/
if (len != 0)
cmdp->save_cmd = t;
cmdp->save_cmdlen = len;
}
if (F_ISSET(sp, SC_EX_GLOBAL)) {
if ((sp->lno = lno) == 0 && db_exist(sp, 1))
sp->lno = 1;
return (0);
}
/*
* If not in a global command, read from the terminal.
*
* If this code is called by vi, we want to reset the terminal and use
* ex's line get routine. It actually works fine if we use vi's get
* routine, but it doesn't look as nice. Maybe if we had a separate
* window or something, but getting a line at a time looks awkward.
* However, depending on the screen that we're using, that may not
* be possible.
*/
if (F_ISSET(sp, SC_VI)) {
if (gp->scr_screen(sp, SC_EX)) {
ex_wemsg(sp, cmdp->cmd->name, EXM_NOCANON);
return (1);
}
/* If we're still in the vi screen, move out explicitly. */
need_newline = !F_ISSET(sp, SC_SCR_EXWROTE);
F_SET(sp, SC_SCR_EX | SC_SCR_EXWROTE);
if (need_newline)
(void)ex_puts(sp, "\n");
/*
* !!!
* Users of historical versions of vi sometimes get confused
* when they enter append mode, and can't seem to get out of
* it. Give them an informational message.
*/
(void)ex_puts(sp,
msg_cat(sp, "273|Entering ex input mode.", NULL));
(void)ex_puts(sp, "\n");
(void)ex_fflush(sp);
}
/*
* Set input flags; the ! flag turns off autoindent for append,
* change and insert.
*/
LF_INIT(TXT_DOTTERM | TXT_NUMBER);
if (!FL_ISSET(cmdp->iflags, E_C_FORCE) && O_ISSET(sp, O_AUTOINDENT))
LF_SET(TXT_AUTOINDENT);
if (O_ISSET(sp, O_BEAUTIFY))
LF_SET(TXT_BEAUTIFY);
/*
* This code can't use the common screen TEXTH structure (sp->tiq),
* as it may already be in use, e.g. ":append|s/abc/ABC/" would fail
* as we are only halfway through the text when the append code fires.
* Use a local structure instead. (The ex code would have to use a
* local structure except that we're guaranteed to finish remaining
* characters in the common TEXTH structure when they were inserted
* into the file, above.)
*/
memset(&tiq, 0, sizeof(TEXTH));
TAILQ_INIT(&tiq);
if (ex_txt(sp, &tiq, 0, flags))
return (1);
for (cnt = 0, tp = TAILQ_FIRST(&tiq); tp != NULL;
++cnt, tp = TAILQ_NEXT(tp, q))
if (db_append(sp, 1, lno++, tp->lb, tp->len))
return (1);
/*
* Set sp->lno to the final line number value (correcting for a
* possible 0 value) as that's historically correct for the final
* line value, whether or not the user entered any text.
*/
if ((sp->lno = lno) == 0 && db_exist(sp, 1))
sp->lno = 1;
return (0);
}
static int
s(SCR *sp, EXCMD *cmdp, char *s, regex_t *re, u_int flags)
{
EVENT ev;
MARK from, to;
TEXTH tiq;
recno_t elno, lno, slno;
regmatch_t match[10];
size_t blen, cnt, last, lbclen, lblen, len, llen;
size_t offset, saved_offset, scno;
int lflag, nflag, pflag, rflag;
int didsub, do_eol_match, eflags, empty_ok, eval;
int linechanged, matched, quit, rval;
unsigned long ul;
char *bp, *lb;
NEEDFILE(sp, cmdp);
slno = sp->lno;
scno = sp->cno;
/*
* !!!
* Historically, the 'g' and 'c' suffices were always toggled as flags,
* so ":s/A/B/" was the same as ":s/A/B/ccgg". If O_EDCOMPATIBLE was
* not set, they were initialized to 0 for all substitute commands. If
* O_EDCOMPATIBLE was set, they were initialized to 0 only if the user
* specified substitute/replacement patterns (see ex_s()).
*/
if (!O_ISSET(sp, O_EDCOMPATIBLE))
sp->c_suffix = sp->g_suffix = 0;
/*
* Historic vi permitted the '#', 'l' and 'p' options in vi mode, but
* it only displayed the last change. I'd disallow them, but they are
* useful in combination with the [v]global commands. In the current
* model the problem is combining them with the 'c' flag -- the screen
* would have to flip back and forth between the confirm screen and the
* ex print screen, which would be pretty awful. We do display all
* changes, though, for what that's worth.
*
* !!!
* Historic vi was fairly strict about the order of "options", the
* count, and "flags". I'm somewhat fuzzy on the difference between
* options and flags, anyway, so this is a simpler approach, and we
* just take it them in whatever order the user gives them. (The ex
* usage statement doesn't reflect this.)
*/
lflag = nflag = pflag = rflag = 0;
if (s == NULL)
goto noargs;
for (lno = OOBLNO; *s != '\0'; ++s)
switch (*s) {
case ' ':
case '\t':
continue;
case '+':
++cmdp->flagoff;
break;
case '-':
--cmdp->flagoff;
break;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
if (lno != OOBLNO)
goto usage;
errno = 0;
if ((ul = strtoul(s, &s, 10)) >= UINT_MAX)
errno = ERANGE;
if (*s == '\0') /* Loop increment correction. */
--s;
if (errno == ERANGE) {
if (ul >= UINT_MAX)
msgq(sp, M_ERR, "Count overflow");
else
msgq(sp, M_SYSERR, NULL);
return (1);
}
lno = (recno_t)ul;
/*
* In historic vi, the count was inclusive from the
* second address.
*/
cmdp->addr1.lno = cmdp->addr2.lno;
cmdp->addr2.lno += lno - 1;
if (!db_exist(sp, cmdp->addr2.lno) &&
db_last(sp, &cmdp->addr2.lno))
return (1);
break;
case '#':
nflag = 1;
break;
case 'c':
sp->c_suffix = !sp->c_suffix;
/* Ex text structure initialization. */
if (F_ISSET(sp, SC_EX)) {
memset(&tiq, 0, sizeof(TEXTH));
TAILQ_INIT(&tiq);
}
break;
case 'g':
sp->g_suffix = !sp->g_suffix;
break;
case 'l':
lflag = 1;
break;
case 'p':
pflag = 1;
break;
case 'r':
if (LF_ISSET(SUB_FIRST)) {
msgq(sp, M_ERR,
"Regular expression specified; r flag meaningless");
return (1);
}
if (!F_ISSET(sp, SC_RE_SEARCH)) {
ex_emsg(sp, NULL, EXM_NOPREVRE);
return (1);
}
rflag = 1;
re = &sp->re_c;
break;
default:
goto usage;
}
if (*s != '\0' || (!rflag && LF_ISSET(SUB_MUSTSETR))) {
usage: ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE);
return (1);
}
noargs: if (F_ISSET(sp, SC_VI) && sp->c_suffix && (lflag || nflag || pflag)) {
msgq(sp, M_ERR,
"The #, l and p flags may not be combined with the c flag in vi mode");
return (1);
}
/*
* bp: if interactive, line cache
* blen: if interactive, line cache length
* lb: build buffer pointer.
* lbclen: current length of built buffer.
* lblen; length of build buffer.
*/
bp = lb = NULL;
blen = lbclen = lblen = 0;
/* For each line... */
for (matched = quit = 0, lno = cmdp->addr1.lno,
elno = cmdp->addr2.lno; !quit && lno <= elno; ++lno) {
/* Someone's unhappy, time to stop. */
if (INTERRUPTED(sp))
break;
/* Get the line. */
if (db_get(sp, lno, DBG_FATAL, &s, &llen))
goto err;
/*
* Make a local copy if doing confirmation -- when calling
* the confirm routine we're likely to lose the cached copy.
*/
if (sp->c_suffix) {
if (bp == NULL) {
GET_SPACE_RET(sp, bp, blen, llen);
} else
ADD_SPACE_RET(sp, bp, blen, llen);
memcpy(bp, s, llen);
s = bp;
}
/* Start searching from the beginning. */
offset = 0;
len = llen;
/* Reset the build buffer offset. */
lbclen = 0;
/* Reset empty match flag. */
empty_ok = 1;
/*
* We don't want to have to do a setline if the line didn't
* change -- keep track of whether or not this line changed.
* If doing confirmations, don't want to keep setting the
* line if change is refused -- keep track of substitutions.
*/
didsub = linechanged = 0;
/* New line, do an EOL match. */
do_eol_match = 1;
/* It's not nul terminated, but we pretend it is. */
eflags = REG_STARTEND;
/*
* The search area is from s + offset to the EOL.
*
* Generally, match[0].rm_so is the offset of the start
* of the match from the start of the search, and offset
* is the offset of the start of the last search.
*/
nextmatch: match[0].rm_so = 0;
match[0].rm_eo = len;
/* Get the next match. */
eval = regexec(re, (char *)s + offset, 10, match, eflags);
/*
* There wasn't a match or if there was an error, deal with
* it. If there was a previous match in this line, resolve
* the changes into the database. Otherwise, just move on.
*/
if (eval == REG_NOMATCH)
goto endmatch;
if (eval != 0) {
re_error(sp, eval, re);
goto err;
}
matched = 1;
/* Only the first search can match an anchored expression. */
eflags |= REG_NOTBOL;
/*
* !!!
* It's possible to match 0-length strings -- for example, the
* command s;a*;X;, when matched against the string "aabb" will
* result in "XbXbX", i.e. the matches are "aa", the space
* between the b's and the space between the b's and the end of
* the string. There is a similar space between the beginning
* of the string and the a's. The rule that we use (because vi
* historically used it) is that any 0-length match, occurring
* immediately after a match, is ignored. Otherwise, the above
* example would have resulted in "XXbXbX". Another example is
* incorrectly using " *" to replace groups of spaces with one
* space.
*
* The way we do this is that if we just had a successful match,
* the starting offset does not skip characters, and the match
* is empty, ignore the match and move forward. If there's no
* more characters in the string, we were attempting to match
* after the last character, so quit.
*/
if (!empty_ok && match[0].rm_so == 0 && match[0].rm_eo == 0) {
empty_ok = 1;
if (len == 0)
goto endmatch;
BUILD(sp, s + offset, 1)
++offset;
--len;
goto nextmatch;
}
/* Confirm change. */
if (sp->c_suffix) {
/*
* Set the cursor position for confirmation. Note,
* if we matched on a '$', the cursor may be past
* the end of line.
*/
from.lno = to.lno = lno;
from.cno = match[0].rm_so + offset;
to.cno = match[0].rm_eo + offset;
/*
* Both ex and vi have to correct for a change before
* the first character in the line.
*/
if (llen == 0)
from.cno = to.cno = 0;
if (F_ISSET(sp, SC_VI)) {
/*
* Only vi has to correct for a change after
* the last character in the line.
*
* XXX
* It would be nice to change the vi code so
* that we could display a cursor past EOL.
*/
if (to.cno >= llen)
to.cno = llen - 1;
if (from.cno >= llen)
from.cno = llen - 1;
sp->lno = from.lno;
sp->cno = from.cno;
if (vs_refresh(sp, 1))
goto err;
vs_update(sp, "Confirm change? [n]", NULL);
if (v_event_get(sp, &ev, 0, 0))
goto err;
switch (ev.e_event) {
case E_CHARACTER:
break;
case E_EOF:
case E_ERR:
case E_INTERRUPT:
goto lquit;
default:
v_event_err(sp, &ev);
goto lquit;
}
} else {
if (ex_print(sp, cmdp, &from, &to, 0) ||
ex_scprint(sp, &from, &to))
goto lquit;
if (ex_txt(sp, &tiq, 0, TXT_CR))
goto err;
ev.e_c = TAILQ_FIRST(&tiq)->lb[0];
}
switch (ev.e_c) {
case CH_YES:
break;
default:
case CH_NO:
didsub = 0;
BUILD(sp, s +offset, match[0].rm_eo);
goto skip;
case CH_QUIT:
/* Set the quit/interrupted flags. */
lquit: quit = 1;
F_SET(sp->gp, G_INTERRUPTED);
/*
* Resolve any changes, then return to (and
* exit from) the main loop.
*/
goto endmatch;
}
}
/*
* Set the cursor to the last position changed, converting
* from 1-based to 0-based.
*/
sp->lno = lno;
sp->cno = match[0].rm_so;
/* Copy the bytes before the match into the build buffer. */
BUILD(sp, s + offset, match[0].rm_so);
/* Substitute the matching bytes. */
didsub = 1;
if (re_sub(sp, s + offset, &lb, &lbclen, &lblen, match))
goto err;
/* Set the change flag so we know this line was modified. */
linechanged = 1;
/* Move past the matched bytes. */
skip: offset += match[0].rm_eo;
len -= match[0].rm_eo;
/* A match cannot be followed by an empty pattern. */
empty_ok = 0;
/*
* If doing a global change with confirmation, we have to
* update the screen. The basic idea is to store the line
* so the screen update routines can find it, and restart.
*/
if (didsub && sp->c_suffix && sp->g_suffix) {
/*
* The new search offset will be the end of the
* modified line.
*/
saved_offset = lbclen;
/* Copy the rest of the line. */
if (len)
BUILD(sp, s + offset, len)
/* Set the new offset. */
offset = saved_offset;
/* Store inserted lines, adjusting the build buffer. */
last = 0;
if (sp->newl_cnt) {
for (cnt = 0;
cnt < sp->newl_cnt; ++cnt, ++lno, ++elno) {
if (db_insert(sp, lno,
lb + last, sp->newl[cnt] - last))
goto err;
last = sp->newl[cnt] + 1;
++sp->rptlines[L_ADDED];
}
lbclen -= last;
offset -= last;
sp->newl_cnt = 0;
}
/* Store and retrieve the line. */
if (db_set(sp, lno, lb + last, lbclen))
goto err;
if (db_get(sp, lno, DBG_FATAL, &s, &llen))
goto err;
ADD_SPACE_RET(sp, bp, blen, llen)
memcpy(bp, s, llen);
s = bp;
len = llen - offset;
/* Restart the build. */
lbclen = 0;
BUILD(sp, s, offset);
/*
* If we haven't already done the after-the-string
* match, do one. Set REG_NOTEOL so the '$' pattern
* only matches once.
*/
if (!do_eol_match)
goto endmatch;
if (offset == len) {
do_eol_match = 0;
eflags |= REG_NOTEOL;
}
goto nextmatch;
}
/*
* If it's a global:
*
* If at the end of the string, do a test for the after
* the string match. Set REG_NOTEOL so the '$' pattern
* only matches once.
*/
if (sp->g_suffix && do_eol_match) {
if (len == 0) {
do_eol_match = 0;
eflags |= REG_NOTEOL;
}
goto nextmatch;
}
endmatch: if (!linechanged)
continue;
/* Copy any remaining bytes into the build buffer. */
if (len)
BUILD(sp, s + offset, len)
/* Store inserted lines, adjusting the build buffer. */
last = 0;
if (sp->newl_cnt) {
for (cnt = 0;
cnt < sp->newl_cnt; ++cnt, ++lno, ++elno) {
if (db_insert(sp,
lno, lb + last, sp->newl[cnt] - last))
goto err;
last = sp->newl[cnt] + 1;
++sp->rptlines[L_ADDED];
}
lbclen -= last;
sp->newl_cnt = 0;
}
/* Store the changed line. */
if (db_set(sp, lno, lb + last, lbclen))
goto err;
/* Update changed line counter. */
if (sp->rptlchange != lno) {
sp->rptlchange = lno;
++sp->rptlines[L_CHANGED];
}
/*
* !!!
* Display as necessary. Historic practice is to only
* display the last line of a line split into multiple
* lines.
*/
if (lflag || nflag || pflag) {
from.lno = to.lno = lno;
from.cno = to.cno = 0;
if (lflag)
(void)ex_print(sp, cmdp, &from, &to, E_C_LIST);
if (nflag)
(void)ex_print(sp, cmdp, &from, &to, E_C_HASH);
if (pflag)
(void)ex_print(sp, cmdp, &from, &to, E_C_PRINT);
}
}
/*
* !!!
* Historically, vi attempted to leave the cursor at the same place if
* the substitution was done at the current cursor position. Otherwise
* it moved it to the first non-blank of the last line changed. There
* were some problems: for example, :s/$/foo/ with the cursor on the
* last character of the line left the cursor on the last character, or
* the & command with multiple occurrences of the matching string in the
* line usually left the cursor in a fairly random position.
*
* We try to do the same thing, with the exception that if the user is
* doing substitution with confirmation, we move to the last line about
* which the user was consulted, as opposed to the last line that they
* actually changed. This prevents a screen flash if the user doesn't
* change many of the possible lines.
*/
if (!sp->c_suffix && (sp->lno != slno || sp->cno != scno)) {
sp->cno = 0;
(void)nonblank(sp, sp->lno, &sp->cno);
}
/*
* If not in a global command, and nothing matched, say so.
* Else, if none of the lines displayed, put something up.
*/
rval = 0;
if (!matched) {
if (!F_ISSET(sp, SC_EX_GLOBAL)) {
msgq(sp, M_ERR, "No match found");
goto err;
}
} else if (!lflag && !nflag && !pflag)
F_SET(cmdp, E_AUTOPRINT);
if (0) {
err: rval = 1;
}
if (bp != NULL)
FREE_SPACE(sp, bp, blen);
if (lb != NULL)
free(lb);
return (rval);
}
