Esempio n. 1
0
Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
        unsigned long ram_size)
{
    qemu_irq cpu_irq[EXYNOS4210_NCPUS];
    int i, n;
    Exynos4210State *s = g_new(Exynos4210State, 1);
    qemu_irq *irqp;
    qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
    unsigned long mem_size;
    DeviceState *dev;
    SysBusDevice *busdev;

    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        s->cpu[n] = cpu_arm_init("cortex-a9");
        if (!s->cpu[n]) {
            fprintf(stderr, "Unable to find CPU %d definition\n", n);
            exit(1);
        }

        /* Create PIC controller for each processor instance */
        irqp = arm_pic_init_cpu(s->cpu[n]);

        /*
         * Get GICs gpio_in cpu_irq to connect a combiner to them later.
         * Use only IRQ for a while.
         */
        cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
    }

    /*** IRQs ***/

    s->irq_table = exynos4210_init_irq(&s->irqs);

    /* IRQ Gate */
    for (i = 0; i < EXYNOS4210_NCPUS; i++) {
        dev = qdev_create(NULL, "exynos4210.irq_gate");
        qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
        qdev_init_nofail(dev);
        /* Get IRQ Gate input in gate_irq */
        for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
            gate_irq[i][n] = qdev_get_gpio_in(dev, n);
        }
        busdev = SYS_BUS_DEVICE(dev);

        /* Connect IRQ Gate output to cpu_irq */
        sysbus_connect_irq(busdev, 0, cpu_irq[i]);
    }

    /* Private memory region and Internal GIC */
    dev = qdev_create(NULL, "a9mpcore_priv");
    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        sysbus_connect_irq(busdev, n, gate_irq[n][0]);
    }
    for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
        s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
    }

    /* Cache controller */
    sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);

    /* External GIC */
    dev = qdev_create(NULL, "exynos4210.gic");
    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    /* Map CPU interface */
    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
    /* Map Distributer interface */
    sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        sysbus_connect_irq(busdev, n, gate_irq[n][1]);
    }
    for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
        s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
    }

    /* Internal Interrupt Combiner */
    dev = qdev_create(NULL, "exynos4210.combiner");
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
        sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
    }
    exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);

    /* External Interrupt Combiner */
    dev = qdev_create(NULL, "exynos4210.combiner");
    qdev_prop_set_uint32(dev, "external", 1);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
        sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
    }
    exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);

    /* Initialize board IRQs. */
    exynos4210_init_board_irqs(&s->irqs);

    /*** Memory ***/

    /* Chip-ID and OMR */
    memory_region_init_ram_ptr(&s->chipid_mem, "exynos4210.chipid",
            sizeof(chipid_and_omr), chipid_and_omr);
    memory_region_set_readonly(&s->chipid_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
                                &s->chipid_mem);

    /* Internal ROM */
    memory_region_init_ram(&s->irom_mem, "exynos4210.irom",
                           EXYNOS4210_IROM_SIZE);
    memory_region_set_readonly(&s->irom_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
                                &s->irom_mem);
    /* mirror of iROM */
    memory_region_init_alias(&s->irom_alias_mem, "exynos4210.irom_alias",
                             &s->irom_mem,
                             0,
                             EXYNOS4210_IROM_SIZE);
    memory_region_set_readonly(&s->irom_alias_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
                                &s->irom_alias_mem);

    /* Internal RAM */
    memory_region_init_ram(&s->iram_mem, "exynos4210.iram",
                           EXYNOS4210_IRAM_SIZE);
    vmstate_register_ram_global(&s->iram_mem);
    memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
                                &s->iram_mem);

    /* DRAM */
    mem_size = ram_size;
    if (mem_size > EXYNOS4210_DRAM_MAX_SIZE) {
        memory_region_init_ram(&s->dram1_mem, "exynos4210.dram1",
                mem_size - EXYNOS4210_DRAM_MAX_SIZE);
        vmstate_register_ram_global(&s->dram1_mem);
        memory_region_add_subregion(system_mem, EXYNOS4210_DRAM1_BASE_ADDR,
                &s->dram1_mem);
        mem_size = EXYNOS4210_DRAM_MAX_SIZE;
    }
    memory_region_init_ram(&s->dram0_mem, "exynos4210.dram0", mem_size);
    vmstate_register_ram_global(&s->dram0_mem);
    memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
            &s->dram0_mem);

   /* PMU.
    * The only reason of existence at the moment is that secondary CPU boot
    * loader uses PMU INFORM5 register as a holding pen.
    */
    sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);

    /* PWM */
    sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
                          s->irq_table[exynos4210_get_irq(22, 0)],
                          s->irq_table[exynos4210_get_irq(22, 1)],
                          s->irq_table[exynos4210_get_irq(22, 2)],
                          s->irq_table[exynos4210_get_irq(22, 3)],
                          s->irq_table[exynos4210_get_irq(22, 4)],
                          NULL);
    /* RTC */
    sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
                          s->irq_table[exynos4210_get_irq(23, 0)],
                          s->irq_table[exynos4210_get_irq(23, 1)],
                          NULL);

    /* Multi Core Timer */
    dev = qdev_create(NULL, "exynos4210.mct");
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < 4; n++) {
        /* Connect global timer interrupts to Combiner gpio_in */
        sysbus_connect_irq(busdev, n,
                s->irq_table[exynos4210_get_irq(1, 4 + n)]);
    }
    /* Connect local timer interrupts to Combiner gpio_in */
    sysbus_connect_irq(busdev, 4,
            s->irq_table[exynos4210_get_irq(51, 0)]);
    sysbus_connect_irq(busdev, 5,
            s->irq_table[exynos4210_get_irq(35, 3)]);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);

    /*** I2C ***/
    for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
        uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
        qemu_irq i2c_irq;

        if (n < 8) {
            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
        } else {
            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
        }

        dev = qdev_create(NULL, "exynos4210.i2c");
        qdev_init_nofail(dev);
        busdev = SYS_BUS_DEVICE(dev);
        sysbus_connect_irq(busdev, 0, i2c_irq);
        sysbus_mmio_map(busdev, 0, addr);
        s->i2c_if[n] = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
    }


    /*** UARTs ***/
    exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
                           EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);

    exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
                           EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);

    exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
                           EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);

    exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
                           EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);

    /*** Display controller (FIMD) ***/
    sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
            s->irq_table[exynos4210_get_irq(11, 0)],
            s->irq_table[exynos4210_get_irq(11, 1)],
            s->irq_table[exynos4210_get_irq(11, 2)],
            NULL);

    sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
            s->irq_table[exynos4210_get_irq(28, 3)]);

    return s;
}
Esempio n. 2
0
Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
        unsigned long ram_size)
{
    int i, n;
    Exynos4210State *s = g_new(Exynos4210State, 1);
    qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
    unsigned long mem_size;
    DeviceState *dev;
    SysBusDevice *busdev;
    ObjectClass *cpu_oc;

    cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, "cortex-a9");
    assert(cpu_oc);

    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        Object *cpuobj = object_new(object_class_get_name(cpu_oc));
        Error *err = NULL;

        /* By default A9 CPUs have EL3 enabled.  This board does not currently
         * support EL3 so the CPU EL3 property is disabled before realization.
         */
        if (object_property_find(cpuobj, "has_el3", NULL)) {
            object_property_set_bool(cpuobj, false, "has_el3", &err);
            if (err) {
                error_report("%s", error_get_pretty(err));
                exit(1);
            }
        }

        s->cpu[n] = ARM_CPU(cpuobj);
        object_property_set_int(cpuobj, EXYNOS4210_SMP_PRIVATE_BASE_ADDR,
                                "reset-cbar", &error_abort);
        object_property_set_bool(cpuobj, true, "realized", &err);
        if (err) {
            error_report("%s", error_get_pretty(err));
            exit(1);
        }
    }

    /*** IRQs ***/

    s->irq_table = exynos4210_init_irq(&s->irqs);

    /* IRQ Gate */
    for (i = 0; i < EXYNOS4210_NCPUS; i++) {
        dev = qdev_create(NULL, "exynos4210.irq_gate");
        qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
        qdev_init_nofail(dev);
        /* Get IRQ Gate input in gate_irq */
        for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
            gate_irq[i][n] = qdev_get_gpio_in(dev, n);
        }
        busdev = SYS_BUS_DEVICE(dev);

        /* Connect IRQ Gate output to CPU's IRQ line */
        sysbus_connect_irq(busdev, 0,
                           qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ));
    }

    /* Private memory region and Internal GIC */
    dev = qdev_create(NULL, "a9mpcore_priv");
    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        sysbus_connect_irq(busdev, n, gate_irq[n][0]);
    }
    for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
        s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
    }

    /* Cache controller */
    sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);

    /* External GIC */
    dev = qdev_create(NULL, "exynos4210.gic");
    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    /* Map CPU interface */
    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
    /* Map Distributer interface */
    sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        sysbus_connect_irq(busdev, n, gate_irq[n][1]);
    }
    for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
        s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
    }

    /* Internal Interrupt Combiner */
    dev = qdev_create(NULL, "exynos4210.combiner");
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
        sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
    }
    exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);

    /* External Interrupt Combiner */
    dev = qdev_create(NULL, "exynos4210.combiner");
    qdev_prop_set_uint32(dev, "external", 1);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
        sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
    }
    exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);

    /* Initialize board IRQs. */
    exynos4210_init_board_irqs(&s->irqs);

    /*** Memory ***/

    /* Chip-ID and OMR */
    memory_region_init_io(&s->chipid_mem, NULL, &exynos4210_chipid_and_omr_ops,
        NULL, "exynos4210.chipid", sizeof(chipid_and_omr));
    memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
                                &s->chipid_mem);

    /* Internal ROM */
    memory_region_init_ram(&s->irom_mem, NULL, "exynos4210.irom",
                           EXYNOS4210_IROM_SIZE, &error_abort);
    vmstate_register_ram_global(&s->irom_mem);
    memory_region_set_readonly(&s->irom_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
                                &s->irom_mem);
    /* mirror of iROM */
    memory_region_init_alias(&s->irom_alias_mem, NULL, "exynos4210.irom_alias",
                             &s->irom_mem,
                             0,
                             EXYNOS4210_IROM_SIZE);
    memory_region_set_readonly(&s->irom_alias_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
                                &s->irom_alias_mem);

    /* Internal RAM */
    memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram",
                           EXYNOS4210_IRAM_SIZE, &error_abort);
    vmstate_register_ram_global(&s->iram_mem);
    memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
                                &s->iram_mem);

    /* DRAM */
    mem_size = ram_size;
    if (mem_size > EXYNOS4210_DRAM_MAX_SIZE) {
        memory_region_init_ram(&s->dram1_mem, NULL, "exynos4210.dram1",
                mem_size - EXYNOS4210_DRAM_MAX_SIZE, &error_abort);
        vmstate_register_ram_global(&s->dram1_mem);
        memory_region_add_subregion(system_mem, EXYNOS4210_DRAM1_BASE_ADDR,
                &s->dram1_mem);
        mem_size = EXYNOS4210_DRAM_MAX_SIZE;
    }
    memory_region_init_ram(&s->dram0_mem, NULL, "exynos4210.dram0", mem_size,
                           &error_abort);
    vmstate_register_ram_global(&s->dram0_mem);
    memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
            &s->dram0_mem);

   /* PMU.
    * The only reason of existence at the moment is that secondary CPU boot
    * loader uses PMU INFORM5 register as a holding pen.
    */
    sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);

    /* PWM */
    sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
                          s->irq_table[exynos4210_get_irq(22, 0)],
                          s->irq_table[exynos4210_get_irq(22, 1)],
                          s->irq_table[exynos4210_get_irq(22, 2)],
                          s->irq_table[exynos4210_get_irq(22, 3)],
                          s->irq_table[exynos4210_get_irq(22, 4)],
                          NULL);
    /* RTC */
    sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
                          s->irq_table[exynos4210_get_irq(23, 0)],
                          s->irq_table[exynos4210_get_irq(23, 1)],
                          NULL);

    /* Multi Core Timer */
    dev = qdev_create(NULL, "exynos4210.mct");
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < 4; n++) {
        /* Connect global timer interrupts to Combiner gpio_in */
        sysbus_connect_irq(busdev, n,
                s->irq_table[exynos4210_get_irq(1, 4 + n)]);
    }
    /* Connect local timer interrupts to Combiner gpio_in */
    sysbus_connect_irq(busdev, 4,
            s->irq_table[exynos4210_get_irq(51, 0)]);
    sysbus_connect_irq(busdev, 5,
            s->irq_table[exynos4210_get_irq(35, 3)]);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);

    /*** I2C ***/
    for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
        uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
        qemu_irq i2c_irq;

        if (n < 8) {
            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
        } else {
            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
        }

        dev = qdev_create(NULL, "exynos4210.i2c");
        qdev_init_nofail(dev);
        busdev = SYS_BUS_DEVICE(dev);
        sysbus_connect_irq(busdev, 0, i2c_irq);
        sysbus_mmio_map(busdev, 0, addr);
        s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c");
    }


    /*** UARTs ***/
    exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
                           EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);

    exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
                           EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);

    exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
                           EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);

    exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
                           EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);

    /*** Display controller (FIMD) ***/
    sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
            s->irq_table[exynos4210_get_irq(11, 0)],
            s->irq_table[exynos4210_get_irq(11, 1)],
            s->irq_table[exynos4210_get_irq(11, 2)],
            NULL);

    sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
            s->irq_table[exynos4210_get_irq(28, 3)]);

    return s;
}
Esempio n. 3
0
Exynos4210State *exynos4210_init(MemoryRegion *system_mem)
{
    Exynos4210State *s = g_new(Exynos4210State, 1);
    qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
    SysBusDevice *busdev;
    DeviceState *dev;
    int i, n;

    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        Object *cpuobj = object_new(ARM_CPU_TYPE_NAME("cortex-a9"));

        /* By default A9 CPUs have EL3 enabled.  This board does not currently
         * support EL3 so the CPU EL3 property is disabled before realization.
         */
        if (object_property_find(cpuobj, "has_el3", NULL)) {
            object_property_set_bool(cpuobj, false, "has_el3", &error_fatal);
        }

        s->cpu[n] = ARM_CPU(cpuobj);
        object_property_set_int(cpuobj, exynos4210_calc_affinity(n),
                                "mp-affinity", &error_abort);
        object_property_set_int(cpuobj, EXYNOS4210_SMP_PRIVATE_BASE_ADDR,
                                "reset-cbar", &error_abort);
        object_property_set_bool(cpuobj, true, "realized", &error_fatal);
    }

    /*** IRQs ***/

    s->irq_table = exynos4210_init_irq(&s->irqs);

    /* IRQ Gate */
    for (i = 0; i < EXYNOS4210_NCPUS; i++) {
        dev = qdev_create(NULL, "exynos4210.irq_gate");
        qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
        qdev_init_nofail(dev);
        /* Get IRQ Gate input in gate_irq */
        for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
            gate_irq[i][n] = qdev_get_gpio_in(dev, n);
        }
        busdev = SYS_BUS_DEVICE(dev);

        /* Connect IRQ Gate output to CPU's IRQ line */
        sysbus_connect_irq(busdev, 0,
                           qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ));
    }

    /* Private memory region and Internal GIC */
    dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        sysbus_connect_irq(busdev, n, gate_irq[n][0]);
    }
    for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
        s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
    }

    /* Cache controller */
    sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);

    /* External GIC */
    dev = qdev_create(NULL, "exynos4210.gic");
    qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    /* Map CPU interface */
    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
    /* Map Distributer interface */
    sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
    for (n = 0; n < EXYNOS4210_NCPUS; n++) {
        sysbus_connect_irq(busdev, n, gate_irq[n][1]);
    }
    for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
        s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
    }

    /* Internal Interrupt Combiner */
    dev = qdev_create(NULL, "exynos4210.combiner");
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
        sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
    }
    exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);

    /* External Interrupt Combiner */
    dev = qdev_create(NULL, "exynos4210.combiner");
    qdev_prop_set_uint32(dev, "external", 1);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
        sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
    }
    exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);

    /* Initialize board IRQs. */
    exynos4210_init_board_irqs(&s->irqs);

    /*** Memory ***/

    /* Chip-ID and OMR */
    memory_region_init_io(&s->chipid_mem, NULL, &exynos4210_chipid_and_omr_ops,
        NULL, "exynos4210.chipid", sizeof(chipid_and_omr));
    memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
                                &s->chipid_mem);

    /* Internal ROM */
    memory_region_init_ram(&s->irom_mem, NULL, "exynos4210.irom",
                           EXYNOS4210_IROM_SIZE, &error_fatal);
    memory_region_set_readonly(&s->irom_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
                                &s->irom_mem);
    /* mirror of iROM */
    memory_region_init_alias(&s->irom_alias_mem, NULL, "exynos4210.irom_alias",
                             &s->irom_mem,
                             0,
                             EXYNOS4210_IROM_SIZE);
    memory_region_set_readonly(&s->irom_alias_mem, true);
    memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
                                &s->irom_alias_mem);

    /* Internal RAM */
    memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram",
                           EXYNOS4210_IRAM_SIZE, &error_fatal);
    memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
                                &s->iram_mem);

   /* PMU.
    * The only reason of existence at the moment is that secondary CPU boot
    * loader uses PMU INFORM5 register as a holding pen.
    */
    sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);

    sysbus_create_simple("exynos4210.clk", EXYNOS4210_CLK_BASE_ADDR, NULL);
    sysbus_create_simple("exynos4210.rng", EXYNOS4210_RNG_BASE_ADDR, NULL);

    /* PWM */
    sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
                          s->irq_table[exynos4210_get_irq(22, 0)],
                          s->irq_table[exynos4210_get_irq(22, 1)],
                          s->irq_table[exynos4210_get_irq(22, 2)],
                          s->irq_table[exynos4210_get_irq(22, 3)],
                          s->irq_table[exynos4210_get_irq(22, 4)],
                          NULL);
    /* RTC */
    sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
                          s->irq_table[exynos4210_get_irq(23, 0)],
                          s->irq_table[exynos4210_get_irq(23, 1)],
                          NULL);

    /* Multi Core Timer */
    dev = qdev_create(NULL, "exynos4210.mct");
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    for (n = 0; n < 4; n++) {
        /* Connect global timer interrupts to Combiner gpio_in */
        sysbus_connect_irq(busdev, n,
                s->irq_table[exynos4210_get_irq(1, 4 + n)]);
    }
    /* Connect local timer interrupts to Combiner gpio_in */
    sysbus_connect_irq(busdev, 4,
            s->irq_table[exynos4210_get_irq(51, 0)]);
    sysbus_connect_irq(busdev, 5,
            s->irq_table[exynos4210_get_irq(35, 3)]);
    sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);

    /*** I2C ***/
    for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
        uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
        qemu_irq i2c_irq;

        if (n < 8) {
            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
        } else {
            i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
        }

        dev = qdev_create(NULL, "exynos4210.i2c");
        qdev_init_nofail(dev);
        busdev = SYS_BUS_DEVICE(dev);
        sysbus_connect_irq(busdev, 0, i2c_irq);
        sysbus_mmio_map(busdev, 0, addr);
        s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c");
    }


    /*** UARTs ***/
    exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
                           EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);

    exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
                           EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);

    exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
                           EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);

    exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
                           EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
                  s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);

    /*** SD/MMC host controllers ***/
    for (n = 0; n < EXYNOS4210_SDHCI_NUMBER; n++) {
        DeviceState *carddev;
        BlockBackend *blk;
        DriveInfo *di;

        /* Compatible with:
         * - SD Host Controller Specification Version 2.0
         * - SDIO Specification Version 2.0
         * - MMC Specification Version 4.3
         * - SDMA
         * - ADMA2
         *
         * As this part of the Exynos4210 is not publically available,
         * we used the "HS-MMC Controller S3C2416X RISC Microprocessor"
         * public datasheet which is very similar (implementing
         * MMC Specification Version 4.0 being the only difference noted)
         */
        dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI);
        qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES);
        qdev_init_nofail(dev);

        busdev = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(busdev, 0, EXYNOS4210_SDHCI_ADDR(n));
        sysbus_connect_irq(busdev, 0, s->irq_table[exynos4210_get_irq(29, n)]);

        di = drive_get(IF_SD, 0, n);
        blk = di ? blk_by_legacy_dinfo(di) : NULL;
        carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
        qdev_prop_set_drive(carddev, "drive", blk, &error_abort);
        qdev_init_nofail(carddev);
    }

    /*** Display controller (FIMD) ***/
    sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
            s->irq_table[exynos4210_get_irq(11, 0)],
            s->irq_table[exynos4210_get_irq(11, 1)],
            s->irq_table[exynos4210_get_irq(11, 2)],
            NULL);

    sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
            s->irq_table[exynos4210_get_irq(28, 3)]);

    return s;
}