Esempi in C++ (Cpp) per exynos4x12_set_abb_member

Esempio n. 1

File: mali_platform_dvfs.c Progetto: ffolkes/android_kernel_samsung_smdk4412

static mali_bool set_mali_dvfs_status(u32 step,mali_bool boostup)
{
	u32 validatedStep=step;
	int err;
	
	if (mali_step_lock > -1 && step != mali_step_lock) {
		step = mali_step_lock;
	}

#ifdef CONFIG_REGULATOR
	if (mali_regulator_get_usecount() == 0) {
		MALI_DEBUG_PRINT(1, ("regulator use_count is 0 \n"));
		return MALI_FALSE;
	}
#endif

	if (boostup) {
#ifdef CONFIG_REGULATOR
		/*change the voltage*/
		mali_regulator_set_voltage(mali_dvfs[step].vol, mali_dvfs[step].vol);
#endif
		/*change the clock*/
		mali_clk_set_rate(mali_dvfs[step].clock, mali_dvfs[step].freq);
	} else {
		/*change the clock*/
		mali_clk_set_rate(mali_dvfs[step].clock, mali_dvfs[step].freq);
#ifdef CONFIG_REGULATOR
		/*change the voltage*/
		mali_regulator_set_voltage(mali_dvfs[step].vol, mali_dvfs[step].vol);
#endif
	}

#ifdef EXYNOS4_ASV_ENABLED
#ifndef CONFIG_ABB_CONTROL
	if (samsung_rev() < EXYNOS4412_REV_2_0) {
		if (mali_dvfs[step].clock == 160)
			exynos4x12_set_abb_member(ABB_G3D, ABB_MODE_100V);
		else
			exynos4x12_set_abb_member(ABB_G3D, ABB_MODE_130V);
	}
#else
	abb_target(ABB_G3D, mali_dvfs[step].clock*1000);
#endif
#endif


	set_mali_dvfs_current_step(validatedStep);
	/*for future use*/
	maliDvfsStatus.pCurrentDvfs = &mali_dvfs[validatedStep];

#if CPUFREQ_LOCK_DURING_440
	/* lock/unlock CPU freq by Mali */
	if (mali_dvfs[step].clock == 440)
		err = cpufreq_lock_by_mali(1200);
	else
		cpufreq_unlock_by_mali();
#endif

	return MALI_TRUE;
}

Esempio n. 2

File: mali_platform_dvfs.c Progetto: plumpudding/opensgn

static mali_bool set_mali_dvfs_status(u32 step,mali_bool boostup)
{
	u32 validatedStep=step;
	int err;

#ifdef CONFIG_REGULATOR
	if (mali_regulator_get_usecount() == 0) {
		MALI_DEBUG_PRINT(1, ("regulator use_count is 0 \n"));
		return MALI_FALSE;
	}
#endif

	if (boostup) {
#ifdef CONFIG_REGULATOR
		/*change the voltage*/
		mali_regulator_set_voltage(mali_dvfs[step].vol, mali_dvfs[step].vol);
#endif
		/*change the clock*/
		mali_clk_set_rate(mali_dvfs[step].clock, mali_dvfs[step].freq);
	} else {
		/*change the clock*/
		mali_clk_set_rate(mali_dvfs[step].clock, mali_dvfs[step].freq);
#ifdef CONFIG_REGULATOR
		/*change the voltage*/
		mali_regulator_set_voltage(mali_dvfs[step].vol, mali_dvfs[step].vol);
#endif
	}

#ifdef EXYNOS4_ASV_ENABLED
	if (mali_dvfs[step].clock == 160)
		exynos4x12_set_abb_member(ABB_G3D, ABB_MODE_100V);
	else
		exynos4x12_set_abb_member(ABB_G3D, ABB_MODE_130V);
#endif


	set_mali_dvfs_current_step(validatedStep);
	/*for future use*/
	maliDvfsStatus.pCurrentDvfs = &mali_dvfs[validatedStep];

	/* lock/unlock CPU freq by Mali */
	/* if ((mali_dvfs[step].clock == 533) || (mali_dvfs[step].clock == 440))
		#if defined(CONFIG_EXYNOS4X12_1800MHZ_SUPPORT)
		err = cpufreq_lock_by_mali(1800);
		#elif defined(CONFIG_EXYNOS4X12_1600MHZ_SUPPORT)
		err = cpufreq_lock_by_mali(1600);
		#elif defined(CONFIG_EXYNOS4X12_1500MHZ_SUPPORT)
		err = cpufreq_lock_by_mali(1500);
		#elif defined(CONFIG_EXYNOS4X12_1400MHZ_SUPPORT)
		err = cpufreq_lock_by_mali(1400);
		#else
		err = cpufreq_lock_by_mali(1200);
		#endif
	else
		cpufreq_unlock_by_mali(); */

	return MALI_TRUE;
}

Esempio n. 3

File: abb_control.c Progetto: sbreen94/Zeus_N8013

void abb_target(enum exynos4x12_abb_member target, int new_freq)
{
	int voltage = get_slice_voltage(target, new_freq);
/*
	printk("%s on %s by freq %d voltage: %d\n",
		__func__, abb_label[target], new_freq, voltage);
*/
	exynos4x12_set_abb_member(target, voltage);
}

Esempio n. 4

static mali_bool set_mali_dvfs_status(u32 step,mali_bool boostup)
{
	u32 validatedStep=step;

#ifdef CONFIG_REGULATOR
	if (mali_regulator_get_usecount() == 0) {
		MALI_DEBUG_PRINT(1, ("regulator use_count is 0 \n"));
		return MALI_FALSE;
	}
#endif

	if (boostup) {
#ifdef CONFIG_REGULATOR
		/*change the voltage*/
		mali_regulator_set_voltage(mali_dvfs[step].vol, mali_dvfs[step].vol);
#endif
		/*change the clock*/
		mali_clk_set_rate(mali_dvfs[step].clock, mali_dvfs[step].freq);
	} else {
		/*change the clock*/
		mali_clk_set_rate(mali_dvfs[step].clock, mali_dvfs[step].freq);
#ifdef CONFIG_REGULATOR
		/*change the voltage*/
		mali_regulator_set_voltage(mali_dvfs[step].vol, mali_dvfs[step].vol);
#endif
	}

#ifdef EXYNOS4_ASV_ENABLED
	if (samsung_rev() < EXYNOS4412_REV_2_0) {
		if (mali_dvfs[step].clock == 160)
			exynos4x12_set_abb_member(ABB_G3D, ABB_MODE_100V);
		else
			exynos4x12_set_abb_member(ABB_G3D, ABB_MODE_130V);
	}
#endif


	set_mali_dvfs_current_step(validatedStep);
	/*for future use*/
	maliDvfsStatus.pCurrentDvfs = &mali_dvfs[validatedStep];

	return MALI_TRUE;
}