static bool cmd_jtag_scan(target *t, int argc, char **argv)
{
(void)t;
uint8_t *irlens = NULL;
gdb_outf("Target voltage: %s\n", platform_target_voltage());
if (argc > 1) {
/* Accept a list of IR lengths on command line */
irlens = alloca(argc);
for (int i = 1; i < argc; i++)
irlens[i-1] = atoi(argv[i]);
irlens[argc-1] = 0;
}
int devs = jtag_scan(irlens);
if(devs < 0) {
gdb_out("JTAG device scan failed!\n");
return false;
}
if(devs == 0) {
gdb_out("JTAG scan found no devices!\n");
return false;
}
gdb_outf("Device IR Len IDCODE Description\n");
for(int i = 0; i < jtag_dev_count; i++)
gdb_outf("%d\t%d\t0x%08lX %s\n", i,
jtag_devs[i].ir_len, jtag_devs[i].idcode,
jtag_devs[i].descr);
gdb_out("\n");
cmd_targets(NULL);
return true;
}
static bool cmd_traceswo(void)
{
extern char serial_no[9];
traceswo_init();
gdb_outf("%s:%02X:%02X\n", serial_no, 5, 0x85);
return true;
}
static bool stm32f4_cmd_erase_mass(target *t)
{
const char spinner[] = "|/-\\";
int spinindex = 0;
gdb_out("Erasing flash... This may take a few seconds. ");
stm32f4_flash_unlock(t);
/* Flash mass erase start instruction */
target_mem_write32(t, FLASH_CR, FLASH_CR_MER);
target_mem_write32(t, FLASH_CR, FLASH_CR_STRT | FLASH_CR_MER);
/* Read FLASH_SR to poll for BSY bit */
while (target_mem_read32(t, FLASH_SR) & FLASH_SR_BSY) {
gdb_outf("\b%c", spinner[spinindex++ % 4]);
if(target_check_error(t)) {
gdb_out("\n");
return false;
}
}
gdb_out("\n");
/* Check for error */
uint16_t sr = target_mem_read32(t, FLASH_SR);
if ((sr & SR_ERROR_MASK) || !(sr & SR_EOP))
return false;
return true;
}
static bool nrf51_cmd_read_hwid(target *t)
{
uint32_t hwid = target_mem_read32(t, NRF51_FICR_CONFIGID) & 0xFFFF;
gdb_outf("Hardware ID: 0x%04X\n", hwid);
return true;
}
static bool stm32f4_cmd_option(target *t, int argc, char *argv[])
{
uint32_t start, val;
int len;
if (t->idcode == 0x449) {
start = 0x1FFF0000;
len = 0x20;
}
else {
start = 0x1FFFC000;
len = 0x10;
}
if ((argc == 2) && !strcmp(argv[1], "erase")) {
stm32f4_option_write(t, 0x0fffaaed);
}
else if ((argc == 3) && !strcmp(argv[1], "write")) {
val = strtoul(argv[2], NULL, 0);
stm32f4_option_write(t, val);
} else {
gdb_out("usage: monitor option erase\n");
gdb_out("usage: monitor option write <value>\n");
}
for (int i = 0; i < len; i += 8) {
uint32_t addr = start + i;
val = target_mem_read32(t, addr);
gdb_outf("0x%08X: 0x%04X\n", addr, val & 0xFFFF);
}
return true;
}
bool cmd_version(void)
{
gdb_outf("Black Magic Probe (Firmware " FIRMWARE_VERSION ") (Hardware Version %d)\n", platform_hwversion());
gdb_out("Copyright (C) 2015 Black Sphere Technologies Ltd.\n");
gdb_out("License GPLv3+: GNU GPL version 3 or later "
"<http://gnu.org/licenses/gpl.html>\n\n");
return true;
}
bool cmd_help(target *t)
{
struct target_command_s *tc;
const struct command_s *c;
gdb_out("General commands:\n");
for(c = cmd_list; c->cmd; c++)
gdb_outf("\t%s -- %s\n", c->cmd, c->help);
if (!t)
return -1;
for (tc = t->commands; tc; tc = tc->next) {
gdb_outf("%s specific commands:\n", tc->specific_name);
for(c = tc->cmds; c->cmd; c++)
gdb_outf("\t%s -- %s\n", c->cmd, c->help);
}
return true;
}
static bool stm32f1_cmd_option(target *t, int argc, char *argv[])
{
uint32_t addr, val;
uint32_t flash_obp_rdp_key;
ADIv5_AP_t *ap = adiv5_target_ap(t);
uint32_t rdprt;
switch(t->idcode) {
case 0x422: /* STM32F30x */
case 0x432: /* STM32F37x */
case 0x440: /* STM32F0 */
flash_obp_rdp_key = FLASH_OBP_RDP_KEY_F3;
break;
default: flash_obp_rdp_key = FLASH_OBP_RDP_KEY;
}
rdprt = (adiv5_ap_mem_read(ap, FLASH_OBR) & FLASH_OBR_RDPRT);
stm32f1_flash_unlock(ap);
adiv5_ap_mem_write(ap, FLASH_OPTKEYR, KEY1);
adiv5_ap_mem_write(ap, FLASH_OPTKEYR, KEY2);
if ((argc == 2) && !strcmp(argv[1], "erase")) {
stm32f1_option_erase(t);
stm32f1_option_write_erased(t, FLASH_OBP_RDP, flash_obp_rdp_key);
} else if (rdprt) {
gdb_out("Device is Read Protected\n");
gdb_out("Use \"monitor option erase\" to unprotect, erasing device\n");
return true;
} else if (argc == 3) {
addr = strtol(argv[1], NULL, 0);
val = strtol(argv[2], NULL, 0);
stm32f1_option_write(t, addr, val);
} else {
gdb_out("usage: monitor option erase\n");
gdb_out("usage: monitor option <addr> <value>\n");
}
if (0 && flash_obp_rdp_key == FLASH_OBP_RDP_KEY_F3) {
/* Reload option bytes on F0 and F3*/
val = adiv5_ap_mem_read(ap, FLASH_CR);
val |= FLASH_CR_OBL_LAUNCH;
stm32f1_option_write(t, FLASH_CR, val);
val &= ~FLASH_CR_OBL_LAUNCH;
stm32f1_option_write(t, FLASH_CR, val);
}
for (int i = 0; i < 0xf; i += 4) {
addr = 0x1ffff800 + i;
val = adiv5_ap_mem_read(ap, addr);
gdb_outf("0x%08X: 0x%04X\n", addr, val & 0xFFFF);
gdb_outf("0x%08X: 0x%04X\n", addr + 2, val >> 16);
}
return true;
}
bool cmd_swdp_scan(void)
{
gdb_outf("Target voltage: %s\n", platform_target_voltage());
if(adiv5_swdp_scan() < 0) {
gdb_out("SW-DP scan failed!\n");
return false;
}
//gdb_outf("SW-DP detected IDCODE: 0x%08X\n", adiv5_dp_list->idcode);
cmd_targets(NULL);
return true;
}
bool cmd_help(target *t)
{
const struct command_s *c;
gdb_out("General commands:\n");
for(c = cmd_list; c->cmd; c++)
gdb_outf("\t%s -- %s\n", c->cmd, c->help);
if (!t)
return -1;
target_command_help(t);
return true;
}
bool cmd_targets(target *cur_target)
{
struct target_s *t;
int i;
if(!target_list) {
gdb_out("No usable targets found.\n");
return false;
}
gdb_out("Available Targets:\n");
gdb_out("No. Att Driver\n");
for(t = target_list, i = 1; t; t = t->next, i++)
gdb_outf("%2d %c %s\n", i, t==cur_target?'*':' ',
t->driver);
return true;
}
static bool cmd_jtag_scan(target *t, int argc, char **argv)
{
(void)t;
uint8_t irlens[argc];
gdb_outf("Target voltage: %s\n", platform_target_voltage());
if (argc > 1) {
/* Accept a list of IR lengths on command line */
for (int i = 1; i < argc; i++)
irlens[i-1] = atoi(argv[i]);
irlens[argc-1] = 0;
}
if(connect_assert_srst)
platform_srst_set_val(true); /* will be deasserted after attach */
int devs = -1;
volatile struct exception e;
TRY_CATCH (e, EXCEPTION_ALL) {
devs = jtag_scan(argc > 1 ? irlens : NULL);
}
bool cmd_morse(void)
{
if(morse_msg)
gdb_outf("%s\n", morse_msg);
return true;
}
bool stm32f1_probe(target *t)
{
size_t flash_size;
size_t block_size = 0x400;
t->idcode = target_mem_read32(t, DBGMCU_IDCODE) & 0xfff;
switch(t->idcode) {
case 0x410: /* Medium density */
case 0x412: /* Low denisty */
case 0x420: /* Value Line, Low-/Medium density */
t->driver = "STM32F1 medium density";
target_add_ram(t, 0x20000000, 0x5000);
stm32f1_add_flash(t, 0x8000000, 0x20000, 0x400);
target_add_commands(t, stm32f1_cmd_list, "STM32 LD/MD");
return true;
case 0x414: /* High density */
case 0x418: /* Connectivity Line */
case 0x428: /* Value Line, High Density */
t->driver = "STM32F1 high density";
target_add_ram(t, 0x20000000, 0x10000);
stm32f1_add_flash(t, 0x8000000, 0x80000, 0x800);
target_add_commands(t, stm32f1_cmd_list, "STM32 HD/CL");
return true;
case 0x422: /* STM32F30x */
case 0x432: /* STM32F37x */
t->driver = "STM32F3";
target_add_ram(t, 0x20000000, 0x10000);
stm32f1_add_flash(t, 0x8000000, 0x80000, 0x800);
target_add_commands(t, stm32f1_cmd_list, "STM32F3");
return true;
}
t->idcode = target_mem_read32(t, DBGMCU_IDCODE_F0) & 0xfff;
switch(t->idcode) {
case 0x444: /* STM32F03 RM0091 Rev.7 */
t->driver = "STM32F03";
break;
case 0x445: /* STM32F04 RM0091 Rev.7 */
t->driver = "STM32F04";
break;
case 0x440: /* STM32F05 RM0091 Rev.7 */
t->driver = "STM32F05";
break;
case 0x448: /* STM32F07 RM0091 Rev.7 */
t->driver = "STM32F07";
block_size = 0x800;
break;
case 0x442: /* STM32F09 RM0091 Rev.7 */
t->driver = "STM32F09";
block_size = 0x800;
break;
default: /* NONE */
return false;
}
flash_size = (target_mem_read32(t, FLASHSIZE_F0) & 0xffff) *0x400;
gdb_outf("flash size %d block_size %d\n", flash_size, block_size);
target_add_ram(t, 0x20000000, 0x5000);
stm32f1_add_flash(t, 0x8000000, flash_size, block_size);
target_add_commands(t, stm32f1_cmd_list, "STM32F0");
return true;
}
