int main(int argc, char *argv[])
{
char *cmdName;
const char *opts="DvqSt:l:h:o:m:C:i:s:";
char parameter[100];
char strParameter[100];
int32 integerParameter = 0;
char *p;
EUI64 destPortGuid = -1;
int c;
int i;
uint8 hfi = 1;
uint8 port = -1;
IB_PATH_RECORD path;
uint16 sessionID = 0;
int32 metaIndex = -1;
uint32 numPorts;
uint32 linkWidth;
uint32 linkSpeed;
uint32 port1LinkWidth;
uint32 fmEnabled;
uint32 linkCRCMode;
uint32 vCU;
uint32 extLoopbackAllowed;
VENDOR_MAD mad;
FSTATUS status = FSUCCESS;
uint8 nodeDescription[NODE_DESC_SIZE];
struct oib_port *oib_port_session = NULL;
// determine how we've been invoked
cmdName = strrchr(argv[0], '/'); // Find last '/' in path
if (cmdName != NULL) {
cmdName++; // Skip over last '/'
} else {
cmdName = argv[0];
}
// Initialize
strParameter[0] = '\0';
// parse options and parameters
while (-1 != (c = getopt(argc, argv, opts))) {
switch (c) {
case 'D':
g_debugMode = 1;
oib_set_dbg(stderr);
break;
case 't':
errno = 0;
strncpy(parameter, optarg, sizeof(parameter)-1);
parameter[sizeof(parameter)-1] = 0;
if ((p = strchr(parameter, ',')) != NULL) {
*p = '\0';
}
if (FSUCCESS != StringToUint64(&destPortGuid, parameter, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid GUID: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
case 'l':
#if !LIST_FILE_SUPPORTED
fprintf(stderr, "Error: l option is not supported at this time\n");
exit(1);
#endif
break;
case 'v':
oib_set_dbg(stderr);
g_verbose = 1;
break;
case 'q':
g_quiet = 1;
break;
case 'h':
if (FSUCCESS != StringToUint8(&hfi, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid HFI Number: %s\n", cmdName, optarg);
usage(cmdName);
}
g_gotHfi = 1;
break;
case 'o':
if (FSUCCESS != StringToUint8(&port, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid Port Number: %s\n", cmdName, optarg);
usage(cmdName);
}
g_gotPort = 1;
break;
case 'C':
if (!g_configNum) {
if (FSUCCESS != StringToUint8(&g_configNum, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid Config-option Number: %s\n", cmdName, optarg);
usage(cmdName);
}
} else {
fprintf(stderr, "%s: Error: Only one instance of -C allowed\n\n", cmdName);
usage(cmdName);
}
break;
case 's':
g_gotStrParam = 1;
strcpy(strParameter, optarg);
break;
case 'i':
g_gotIntParam = 1;
if (FSUCCESS != StringToInt32(&integerParameter, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid integer parameter: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
case 'S':
g_gotSave = 1;
break;
default:
usage(cmdName);
break;
}
}
// user has requested display of help
if (argc == 1) {
usage(cmdName);
exit(0);
}
if (-1 == destPortGuid) {
fprintf(stderr, "%s: Error: Must specify a target GUID\n", cmdName);
exit(1);
}
if (g_configNum == 0) {
fprintf(stderr, "%s: Error: must enter a configuration option number\n", cmdName);
exit(1);
}
if (g_quiet && (g_debugMode || g_verbose)) {
fprintf(stderr, "%s: Error: Can not specify both -q and -D|-v\n", cmdName);
exit(1);
}
if (!port) {
fprintf(stderr, "%s: Error: Invalid port number, First Port is 1\n", cmdName);
exit(1);
}
if (port == (uint8)-1)
port = 0; // first active port
// Get the LID
status = oib_open_port_by_num(&oib_port_session, hfi, port);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Unable to open fabric interface.\n", cmdName);
exit(1);
}
if (getDestPath(oib_port_session, destPortGuid, cmdName, &path) != FSUCCESS) {
fprintf(stderr, "%s: Error finding destination path\n", cmdName);
status = FERROR;
goto err_exit;
}
// Send a ClassPortInfo to see if the switch is responding
status = sendClassPortInfoMad(oib_port_session, &path, &mad);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv ClassPortInfo\n", cmdName);
goto err_exit;
}
// Get a session ID
sessionID = getSessionID(oib_port_session, &path);
if (sessionID == (uint16)-1) {
fprintf(stderr, "%s: Error: Failed to obtain sessionID\n", cmdName);
status = FERROR;
goto err_exit;
}
// Perform the config option
switch (g_configNum) {
case 1:
if (!g_gotStrParam) {
fprintf(stderr, "%s: Error: must enter a string parameter (-s) with configuration option 1\n", cmdName);
status = FERROR;
} else if (strlen(strParameter) > 63) {
fprintf(stderr, "%s: Error: Invalid node description: %s\n", cmdName, strParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(systemMetaData, systemMetaDataSize, "NODE_STRING");
}
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find NODE_STRING in metaData table\n", cmdName);
status = FERROR;
}
if (status == FSUCCESS) {
strncpy((char*)nodeDescription, strParameter, NODE_DESC_SIZE);
nodeDescription[NODE_DESC_SIZE-1]=0;
status = sendSysTableAccessSetMad(oib_port_session, &path, &mad, sessionID, (uint8)metaIndex,
(uint8)NODE_DESC_SIZE, nodeDescription);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv SysTableAccessSet MAD\n", cmdName);
status = FERROR;
}
}
break;
case 2:
fprintf(stderr, "%s: Error: vendor key no longer supported\n", cmdName);
status = FERROR;
break;
case 3:
fprintf(stderr, "%s: Error: MTU Capability no longer supported\n", cmdName);
status = FERROR;
break;
case 4:
fprintf(stderr, "%s: Error: VL Capability no longer supported\n", cmdName);
status = FERROR;
break;
case 5:
if (!g_gotIntParam) {
fprintf(stderr, "%s: Error: must enter a integer parameter (-i) with configuration option 5\n", cmdName);
status = FERROR;
} else if ((integerParameter < 1) || (integerParameter > 15)) {
fprintf(stderr, "%s: Error: bad integer value %d; must be 1-1X, 2-2X, 3-2X_1X, 4-3X, 5-3_1X, 6-3X_2X, 7-3X_2X_1X, 8-4X, 9-4X_1X, 10-4X_2X, 11-4X_2X_1X, 12-4X_3X, 13-4X_3X_1X, 14-4X_3X_2X, 15-4X_3X_2X_1X\n", cmdName, integerParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(&portMetaData[0], portMetaDataSize, "LINK_WIDTH_SUPPORTED");
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find LINK WIDTH SUPPORTED in metaData table\n", cmdName);
status = FERROR;
}
}
if (status == FSUCCESS) {
numPorts = getNumPorts(oib_port_session, &path, sessionID);
linkWidth = integerParameter;
// make sure that port1 always has 4x enabled
port1LinkWidth = linkWidth | 0x8;
linkWidth = ntoh32(linkWidth);
port1LinkWidth = ntoh32(port1LinkWidth);
// first set port 1
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, 1, 4, (uint8 *)&port1LinkWidth);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, 1);
status = FERROR;
}
// now set ports 2 through numPorts
for (i = 2; i <= numPorts; i++) {
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, i, 4, (uint8 *)&linkWidth);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, i);
status = FERROR;
}
}
}
break;
case 7:
if (!g_gotIntParam) {
fprintf(stderr, "%s: Error: must enter a integer parameter (-i) with configuration option 7\n", cmdName);
status = FERROR;
} else if ((integerParameter < 1) || (integerParameter > 3)) {
fprintf(stderr, "%s: Error: bad integer value %d; must be 1 for 12G, 2 for 25G, 3 for 12G/25G\n", cmdName, integerParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(&portMetaData[0], portMetaDataSize, "LINK_SPEED_SUPPORTED");
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find LINK SPEED SUPPORTED in metaData table\n", cmdName);
status = FERROR;
}
}
if (status == FSUCCESS) {
numPorts = getNumPorts(oib_port_session, &path, sessionID);
linkSpeed = integerParameter;
linkSpeed = ntoh32(linkSpeed);
// set ports 1 through numPorts
for (i = 1; i <= numPorts; i++) {
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, i, 4, (uint8 *)&linkSpeed);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, i);
status = FERROR;
}
}
}
break;
case 8:
if (!g_gotIntParam) {
fprintf(stderr, "%s: Error: must enter an integer paramemter (-i) with configuration option 8\n", cmdName);
status = FERROR;
} else if ((integerParameter < 0) || (integerParameter > 1)) {
fprintf(stderr, "%s: Error: bad integer value %d; must be 0 for disable or 1 for enable\n", cmdName, integerParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(&portMetaData[0], portMetaDataSize, "FM_ENABLED");
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find FM ENABLED in metaData table\n", cmdName);
status = FERROR;
}
}
if (status == FSUCCESS) {
numPorts = getNumPorts(oib_port_session, &path, sessionID);
fmEnabled = integerParameter;
fmEnabled = ntoh32(fmEnabled);
// set ports 1 through numPorts
for (i = 1; i <= numPorts; i++) {
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, i, 4, (uint8 *)&fmEnabled);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, i);
status = FERROR;
}
}
}
break;
case 9:
if (!g_gotIntParam) {
fprintf(stderr, "%s: Error: must enter an integer paramemter (-i) with configuration option 9\n", cmdName);
status = FERROR;
} else if ((integerParameter < 0) || (integerParameter > 7)) {
fprintf(stderr, "%s: Error: bad integer value %d; must be 0-16b, 1-14b/16b, 2-48b/16b, 3-48b/14b/16b, 4-per lane/16b, 5-per lane/14b/16b, 6-per lane/48b/16b, 7-per lane/48b/14b/16b\n", cmdName, integerParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(&portMetaData[0], portMetaDataSize, "LTP_CRC_MODE_SUPPORTED");
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find CRC in metaData table\n", cmdName);
status = FERROR;
}
}
if (status == FSUCCESS) {
numPorts = getNumPorts(oib_port_session, &path, sessionID);
linkCRCMode = integerParameter;
linkCRCMode = ntoh32(linkCRCMode);
// set ports 1 through numPorts
for (i = 1; i <= numPorts; i++) {
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, i, 4, (uint8 *)&linkCRCMode);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, i);
status = FERROR;
}
}
}
break;
case 10:
if (!g_gotIntParam) {
fprintf(stderr, "%s: Error: must enter an integer paramemter (-i) with configuration option 10\n", cmdName);
status = FERROR;
} else if (integerParameter < 0 || integerParameter > 7) {
fprintf(stderr, "%s: Error: bad integer value %d; Must be 0-7", cmdName, integerParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(&portMetaData[0], portMetaDataSize, "VCU");
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find vCU in metaData table\n", cmdName);
status = FERROR;
}
}
if (status == FSUCCESS) {
numPorts = getNumPorts(oib_port_session, &path, sessionID);
vCU = integerParameter;
vCU = ntoh32(vCU);
// set ports 1 through numPorts
for (i = 1; i <= numPorts; i++) {
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, i, 4, (uint8 *)&vCU);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, i);
status = FERROR;
}
}
}
break;
case 11:
if (!g_gotIntParam) {
fprintf(stderr, "%s: Error: must enter an integer paramemter (-i) with configuration option 11\n", cmdName);
status = FERROR;
} else if (integerParameter < 0 || integerParameter > 1) {
fprintf(stderr, "%s: Error: bad integer value %d; must be 0 for disable or 1 for enable\n", cmdName, integerParameter);
status = FERROR;
} else {
metaIndex = getMetaDataIndexByField(&portMetaData[0], portMetaDataSize, "EXTERNAL_LOOPBACK_ALLOWED");
if (metaIndex < 0) {
fprintf(stderr, "%s: Error: can not find EXTERNAL LOOPBACK ALLOWED in metaData table\n", cmdName);
status = FERROR;
}
}
if (status == FSUCCESS) {
numPorts = getNumPorts(oib_port_session, &path, sessionID);
extLoopbackAllowed = integerParameter;
extLoopbackAllowed = ntoh32(extLoopbackAllowed);
// set ports 1 through numPorts
for (i = 1; i <= numPorts; i++) {
status = sendPortTableAccessSetMad(oib_port_session, &path, &mad, sessionID,
(uint8)metaIndex, i, 4, (uint8 *)&extLoopbackAllowed);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv PortTableAccessSet MAD for port %d\n", cmdName, i);
status = FERROR;
}
}
}
break;
default:
if (sessionID>0) releaseSession(oib_port_session, &path, sessionID);
fprintf(stderr, "Error: Invalid configuration option number %d\n", g_configNum);
usage(cmdName);
break;
}
if (g_gotSave) {
// save configuration to make change permanent
status = sendSaveConfigMad(oib_port_session, &path, &mad, sessionID);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv SaveConfig MAD\n", cmdName);
status = FERROR;
}
}
if (sessionID>0) releaseSession(oib_port_session, &path, sessionID);
printf("opaswconfigure completed\n");
err_exit:
if (oib_port_session != NULL) {
oib_close_port(oib_port_session);
}
if (status == FSUCCESS)
exit(0);
else
exit(1);
}
int main(int argc, char *argv[])
{
char *cmdName;
const char *opts="Dvqt:l:h:o:m:Q:i:";
char parameter[100];
char *p;
EUI64 destPortGuid = -1;
int c;
int i;
uint8 hfi = 0;
uint8 port = 0;
IB_PATH_RECORD path;
uint16 sessionID;
uint32 regValue;
uint32 fanSpeed[OPASW_PSOC_FAN_CTRL_TACHS];
char tempStrs[I2C_OPASW_TEMP_SENSOR_COUNT][TEMP_STR_LENGTH];
uint32 psStatus;
uint8 fwVersion[40];
vpd_fruInfo_rec_t vpdInfo;
char mfgID[10];
char mfgDate[20];
char mfgTime[10];
uint8 nodeDesc[80];
opasw_ini_descriptor_get_t tableDescriptors;
table_parsed_data_t *portParsedDataTable=NULL;
uint32 numPorts;
uint32 portEntrySize;
uint8 memoryData[200];
uint8 boardID;
VENDOR_MAD mad;
FSTATUS status = FSUCCESS;
uint32 asicVersion;
uint8 chipStep;
uint8 chipRev;
table_parsed_data_t *portPtrs=NULL;
uint32 portLinkWidthSupportedIndex;
uint32 portLinkSpeedSupportedIndex;
uint32 portFMEnabledIndex;
uint32 portLinkCRCModeIndex;
uint32 portvCUIndex;
uint32 portExternalLoopbackAllowedIndex;
char portLinkCRCModeValue[35];
char portLinkWidthSupportedText[20];
char portLinkSpeedSupportedText[20];
struct oib_port *oib_port_session = NULL;
// determine how we've been invoked
cmdName = strrchr(argv[0], '/'); // Find last '/' in path
if (cmdName != NULL) {
cmdName++; // Skip over last '/'
} else {
cmdName = argv[0];
}
// Initialize
// parse options and parameters
while (-1 != (c = getopt(argc, argv, opts))) {
switch (c) {
case 'D':
g_debugMode = 1;
oib_set_dbg(stderr);
break;
case 't':
errno = 0;
strncpy(parameter, optarg, sizeof(parameter)-1);
parameter[sizeof(parameter)-1] = 0;
if ((p = strchr(parameter, ',')) != NULL) {
*p = '\0';
}
if (FSUCCESS != StringToUint64(&destPortGuid, parameter, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid GUID: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
case 'l':
#if !LIST_FILE_SUPPORTED
fprintf(stderr, "Error: l option is not supported at this time\n");
exit(1);
#endif
break;
case 'v':
oib_set_dbg(stderr);
g_verbose = 1;
break;
case 'q':
g_quiet = 1;
break;
case 'h':
if (FSUCCESS != StringToUint8(&hfi, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid HFI Number: %s\n", cmdName, optarg);
usage(cmdName);
}
g_gotHfi = 1;
break;
case 'o':
if (FSUCCESS != StringToUint8(&port, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid Port Number: %s\n", cmdName, optarg);
usage(cmdName);
}
g_gotPort = 1;
break;
case 'Q':
if (FSUCCESS != StringToUint8(&g_queryNum, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid Query Number: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
case 'i':
if (FSUCCESS != StringToInt8(&g_intParam, optarg, NULL, 0, TRUE)
|| g_intParam < 0) {
fprintf(stderr, "%s: Error: Invalid integer parameter: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
default:
usage(cmdName);
break;
}
}
// user has requested display of help
if (argc == 1) {
usage(cmdName);
exit(0);
}
if (-1 == destPortGuid) {
fprintf(stderr, "%s: Error: Must specify a target GUID\n", cmdName);
exit(1);
}
if (g_queryNum == 0) {
fprintf(stderr, "%s: Error: must enter a query number\n", cmdName);
exit(1);
}
if ((g_queryNum == 8) && ((g_intParam > MAX_PS) || (g_intParam < MIN_PS))) {
fprintf(stderr, "%s: Error: Query number 8 - must use -i for valid Power Supply number %d - %d\n", cmdName, MIN_PS, MAX_PS);
usage(cmdName);
}
if (g_quiet && (g_debugMode || g_verbose)) {
fprintf(stderr, "%s: Error: Can not specify both -q and -D|-v\n", cmdName);
exit(1);
}
// Get the path
status = oib_open_port_by_num(&oib_port_session, hfi, port);
if (status != 0) {
fprintf(stderr, "%s: Error: Unable to open fabric interface.\n", cmdName);
exit(1);
}
if (getDestPath(oib_port_session, destPortGuid, cmdName, &path) != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to get destination path\n", cmdName);
goto err_exit;
}
// Send a ClassPortInfo to see if the switch is responding
status = sendClassPortInfoMad(oib_port_session, &path, &mad);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv ClassPortInfo\n", cmdName);
goto err_exit;
}
// Get a session ID
sessionID = getSessionID(oib_port_session, &path);
if (sessionID == (uint16)-1) {
fprintf(stderr, "%s: Error: Failed to obtain sessionID\n", cmdName);
status = FERROR;
goto err_exit;
}
// Send the test mad
switch (g_queryNum) {
case 1:
fprintf(stderr, "Error: Module type query no longer supported.\n");
status = FERROR;
break;
case 2:
status = sendRegisterAccessMad(oib_port_session, &path, &mad, sessionID,
(uint8)0x6f, ®Value, 1);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to access register - status %d\n", status);
break;
}
printf("Switch has booted from %s firmware image\n", (regValue & EEPROM_MASK) ? "failsafe" : "primary");
break;
case 3:
status = getFwVersion(oib_port_session, &path, &mad, sessionID, fwVersion);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to acquire fw version - status %d\n", status);
break;
}
printf("FW Version is %s\n", fwVersion);
break;
case 4:
status = getVPDInfo(oib_port_session, &path, &mad, sessionID, OPASW_MODULE, &vpdInfo);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to access vpd info - status %d\n", status);
break;
}
snprintf(mfgID, sizeof(mfgID), "%02x%02x%02x", vpdInfo.mfgID[0] & 0xff, vpdInfo.mfgID[1] & 0xff, vpdInfo.mfgID[2] & 0xff);
snprintf(mfgDate, sizeof(mfgDate), "%d-%02d-%d", vpdInfo.mfgMonth, vpdInfo.mfgDay, vpdInfo.mfgYear + 2000);
snprintf(mfgTime, sizeof(mfgTime), "%02d:%02d", vpdInfo.mfgHours, vpdInfo.mfgMins);
printf("VPD \"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\"\n",
vpdInfo.serialNum,
vpdInfo.partNum,
vpdInfo.model,
vpdInfo.version,
vpdInfo.mfgName,
vpdInfo.productName,
mfgID,
mfgDate,
mfgTime);
break;
case 5:
status = getNodeDescription(oib_port_session, &path, sessionID, nodeDesc);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to acquire node description - status %d\n", status);
break;
}
printf("Node description is %s\n", nodeDesc);
break;
case 6:
status = getTempReadings(oib_port_session, &path, &mad, sessionID, tempStrs);
for (i=0; i<I2C_OPASW_TEMP_SENSOR_COUNT; i++) {
printf("SENSOR %d: %s ", i, tempStrs[i]);
}
printf("\n");
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get one or more temperature readings - status %s\n",
iba_fstatus_msg(status & 0xFF));
}
break;
case 7:
for (i = 0; i < OPASW_PSOC_FAN_CTRL_TACHS; i++) {
status = getFanSpeed(oib_port_session, &path, &mad, sessionID,
(uint32)i, &fanSpeed[i]);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get fan speed for fan %d - status %d\n", i, status);
break;
}
if (g_verbose) {
printf("Fan speed is %d\n", fanSpeed[i]);
}
// TODO: stl1baseboard.c only reports the speed itself, not FAST/SLOW/NORMAL, so I can't confirm that this matches
if (fanSpeed[i] > MAX_FAN_SPEED)
printf("FAN %d:FAST ", i);
else if (fanSpeed[i] < MIN_FAN_SPEED)
printf("FAN %d:SLOW ", i);
else
printf("FAN %d:NORMAL ", i);
}
printf("\n");
break;
case 8:
status = getPowerSupplyStatus(oib_port_session, &path, &mad, sessionID, g_intParam,
&psStatus);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get power supply status for ps %d - status %d\n", g_intParam, status);
break;
}
switch (psStatus) {
case PS_ONLINE:
printf("PS %d: ONLINE\n", g_intParam);
break;
case PS_OFFLINE:
printf("PS %d: OFFLINE\n", g_intParam);
break;
case PS_NOT_PRESENT:
printf("PS %d: NOT PRESENT\n", g_intParam);
break;
case PS_INVALID:
printf("PS %d: INVALID\n", g_intParam);
break;
default:
fprintf(stderr, "Error: Failed to get power supply status for ps %d\n", g_intParam);
break;
}
break;
case 9:
status = getAsicVersion(oib_port_session, &path, &mad, sessionID, &asicVersion);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get ASIC version - status %d\n", status);
break;
}
chipStep = (asicVersion & ASIC_CHIP_STEP_MASK) >> ASIC_CHIP_STEP_SHFT;
chipRev = (asicVersion & ASIC_CHIP_REV_MASK) >> ASIC_CHIP_REV_SHFT;
printf("ASIC Version: V");
if (chipRev == 0) {
switch (chipStep) {
case ASIC_CHIP_STEP_A:
printf("1\n");
break;
case ASIC_CHIP_STEP_B:
printf("2\n");
break;
case ASIC_CHIP_STEP_C:
printf("3\n");
break;
default:
printf("0\n");
break;
}
} else {
printf("0\n");
}
break;
case 10:
printf("Session ID: %d\n", sessionID);
break;
case 11:
{
/* query port 2 */
int dest_port_query=1;
printf("Switch configuration values\n");
status = sendIniDescriptorGetMad(oib_port_session, &path, &mad, sessionID, &tableDescriptors);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to get ini descriptors - status %d\n", cmdName, status);
goto retErr;
}
numPorts = getNumPorts(oib_port_session, &path, sessionID);
if( numPorts <= 0){
fprintf(stderr,"error in fetching port records\n");
goto retErr;
}
portEntrySize = tableDescriptors.portDataLen / numPorts;
status = sendMemAccessGetMad(oib_port_session, &path, &mad, sessionID, tableDescriptors.portDataAddr + (dest_port_query * portEntrySize), portEntrySize*4, memoryData);
if (status != FSUCCESS) {
printf("Mem Access MAD Failed \n");
goto retErr;
}
if (g_verbose) {
printf("MemoryData dump:\n");
opaswDisplayBuffer((char *)memoryData, portEntrySize * 4);
}
portParsedDataTable = malloc(tableDescriptors.portMetaDataLen * sizeof(table_parsed_data_t));
if(portParsedDataTable == NULL)
{
fprintf(stderr,"Not enough memory \n");
goto retErr;
}
status = parseDataTable(&portMetaData[0], memoryData, portMetaDataSize, portParsedDataTable, 0);
if(status != FSUCCESS) {
fprintf(stderr," failed: parseDataTable \n");
goto retErr;
}
portPtrs = portParsedDataTable;
portLinkWidthSupportedIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "LINK_WIDTH_SUPPORTED");
portLinkSpeedSupportedIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "LINK_SPEED_SUPPORTED");
portFMEnabledIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "FM_ENABLED");
portLinkCRCModeIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "LTP_CRC_MODE_SUPPORTED");
portvCUIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "VCU");
portExternalLoopbackAllowedIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "EXTERNAL_LOOPBACK_ALLOWED");
status = getNodeDescription(oib_port_session, &path, sessionID, nodeDesc);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to acquire node description - status %d\n", status);
goto retErr;
}
#define PRINT_REC(str,fmt,arg...) printf(" %-*s : "fmt,35,str,arg);
StlLinkWidthToText(portPtrs[portLinkWidthSupportedIndex].val.intVal, portLinkWidthSupportedText, 20);
StlLinkSpeedToText(portPtrs[portLinkSpeedSupportedIndex].val.intVal, portLinkSpeedSupportedText, 20);
PRINT_REC("Link Width"," %s\n", portLinkWidthSupportedText);
PRINT_REC("Link Speed"," %s\n", portLinkSpeedSupportedText);
PRINT_REC("FM Enabled"," %s\n", portPtrs[portFMEnabledIndex].val.intVal ? "Yes" : "No");
PRINT_REC("Link CRC Mode"," %s\n", StlPortLtpCrcModeVMAToText(portPtrs[portLinkCRCModeIndex].val.intVal,portLinkCRCModeValue,sizeof(portLinkCRCModeValue)));
PRINT_REC("vCU"," %d\n", portPtrs[portvCUIndex].val.intVal);
PRINT_REC("External Loopback Allowed"," %s\n", portPtrs[portExternalLoopbackAllowedIndex].val.intVal ? "Yes" : "No");
PRINT_REC("Node Description"," %s\n", strlen((const char *)nodeDesc)==0?(const char *)"no description":(char *)nodeDesc);
retErr:
if(portParsedDataTable)
free(portParsedDataTable);
break;
}
case 12:
status = getBoardID(oib_port_session, &path, &mad, sessionID, &boardID);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get board id - status %d\n", status);
break;
}
printf("BoardID: 0x%02x\n", boardID);
break;
default:
fprintf(stderr, "Error: Invalid query number %d\n", g_queryNum);
releaseSession(oib_port_session, &path, sessionID);
usage(cmdName);
break;
}
releaseSession(oib_port_session, &path, sessionID);
printf("opaswquery completed\n");
err_exit:
if (oib_port_session != NULL) {
oib_close_port(oib_port_session);
}
if (status == FSUCCESS)
exit(0);
else
exit(1);
}