/** * @brief FlightDataModel::data Fetch the data from the model * @param index Specifies the row and column to fetch * @param role Either use Qt::DisplayRole or Qt::EditRole * @return The data as a variant or QVariant::Invalid for a bad role */ QVariant FlightDataModel::data(const QModelIndex &index, int role) const { if (role == Qt::DisplayRole || role==Qt::EditRole || role==Qt::UserRole) { if(!index.isValid() || index.row() > dataStorage.length()-1) return QVariant::Invalid; PathPlanData * row=dataStorage.at(index.row()); // For the case of mode we want the model to normally return the string value // associated with that enum for display purposes. However in the case of // Qt::UserRole this should fall through and return the numerical value of // the enum if (index.column() == (int) FlightDataModel::MODE && role == Qt::DisplayRole) { return modeNames.value(row->mode); } struct FlightDataModel::NED NED; switch(index.column()) { case WPDESCRIPTION: return row->wpDescription; case LATPOSITION: return row->latPosition; case LNGPOSITION: return row->lngPosition; case ALTITUDE: return row->altitude; case NED_NORTH: NED = getNED(index.row()); return NED.North; case NED_EAST: NED = getNED(index.row()); return NED.East; case NED_DOWN: NED = getNED(index.row()); return NED.Down; case VELOCITY: return row->velocity; case MODE: return row->mode; case MODE_PARAMS: return row->mode_params; case LOCKED: return row->locked; } } return QVariant::Invalid; }
/** * @brief Use the INSGPS fusion algorithm in either indoor or outdoor mode (use GPS) * @params[in] first_run This is the first run so trigger reinitialization * @params[in] outdoor_mode If true use the GPS for position, if false weakly pull to (0,0) * @return 0 for success, -1 for failure */ static int32_t updateAttitudeINSGPS(bool first_run, bool outdoor_mode) { UAVObjEvent ev; GyrosData gyrosData; AccelsData accelsData; MagnetometerData magData; BaroAltitudeData baroData; GPSPositionData gpsData; GPSVelocityData gpsVelData; GyrosBiasData gyrosBias; static bool mag_updated = false; static bool baro_updated; static bool gps_updated; static bool gps_vel_updated; static float baroOffset = 0; static uint32_t ins_last_time = 0; static bool inited; float NED[3] = {0.0f, 0.0f, 0.0f}; float vel[3] = {0.0f, 0.0f, 0.0f}; float zeros[3] = {0.0f, 0.0f, 0.0f}; // Perform the update uint16_t sensors = 0; float dT; // Wait until the gyro and accel object is updated, if a timeout then go to failsafe if ( (xQueueReceive(gyroQueue, &ev, FAILSAFE_TIMEOUT_MS / portTICK_RATE_MS) != pdTRUE) || (xQueueReceive(accelQueue, &ev, 1 / portTICK_RATE_MS) != pdTRUE) ) { // Do not set attitude timeout warnings in simulation mode if (!AttitudeActualReadOnly()){ AlarmsSet(SYSTEMALARMS_ALARM_ATTITUDE,SYSTEMALARMS_ALARM_WARNING); return -1; } } if (inited) { mag_updated = 0; baro_updated = 0; gps_updated = 0; gps_vel_updated = 0; } if (first_run) { inited = false; init_stage = 0; mag_updated = 0; baro_updated = 0; gps_updated = 0; gps_vel_updated = 0; ins_last_time = PIOS_DELAY_GetRaw(); return 0; } mag_updated |= (xQueueReceive(magQueue, &ev, 0 / portTICK_RATE_MS) == pdTRUE); baro_updated |= xQueueReceive(baroQueue, &ev, 0 / portTICK_RATE_MS) == pdTRUE; gps_updated |= (xQueueReceive(gpsQueue, &ev, 0 / portTICK_RATE_MS) == pdTRUE) && outdoor_mode; gps_vel_updated |= (xQueueReceive(gpsVelQueue, &ev, 0 / portTICK_RATE_MS) == pdTRUE) && outdoor_mode; // Get most recent data GyrosGet(&gyrosData); AccelsGet(&accelsData); MagnetometerGet(&magData); BaroAltitudeGet(&baroData); GPSPositionGet(&gpsData); GPSVelocityGet(&gpsVelData); GyrosBiasGet(&gyrosBias); // Discard mag if it has NAN (normally from bad calibration) mag_updated &= (magData.x == magData.x && magData.y == magData.y && magData.z == magData.z); // Don't require HomeLocation.Set to be true but at least require a mag configuration (allows easily // switching between indoor and outdoor mode with Set = false) mag_updated &= (homeLocation.Be[0] != 0 || homeLocation.Be[1] != 0 || homeLocation.Be[2]); // Have a minimum requirement for gps usage gps_updated &= (gpsData.Satellites >= 7) && (gpsData.PDOP <= 4.0f) && (homeLocation.Set == HOMELOCATION_SET_TRUE); if (!inited) AlarmsSet(SYSTEMALARMS_ALARM_ATTITUDE,SYSTEMALARMS_ALARM_ERROR); else if (outdoor_mode && gpsData.Satellites < 7) AlarmsSet(SYSTEMALARMS_ALARM_ATTITUDE,SYSTEMALARMS_ALARM_ERROR); else AlarmsClear(SYSTEMALARMS_ALARM_ATTITUDE); if (!inited && mag_updated && baro_updated && (gps_updated || !outdoor_mode)) { // Don't initialize until all sensors are read if (init_stage == 0 && !outdoor_mode) { float Pdiag[16]={25.0f,25.0f,25.0f,5.0f,5.0f,5.0f,1e-5f,1e-5f,1e-5f,1e-5f,1e-5f,1e-5f,1e-5f,1e-4f,1e-4f,1e-4f}; float q[4]; float pos[3] = {0.0f, 0.0f, 0.0f}; // Initialize barometric offset to homelocation altitude baroOffset = -baroData.Altitude; pos[2] = -(baroData.Altitude + baroOffset); // Reset the INS algorithm INSGPSInit(); INSSetMagVar(revoCalibration.mag_var); INSSetAccelVar(revoCalibration.accel_var); INSSetGyroVar(revoCalibration.gyro_var); INSSetBaroVar(revoCalibration.baro_var); // Initialize the gyro bias from the settings float gyro_bias[3] = {gyrosBias.x * F_PI / 180.0f, gyrosBias.y * F_PI / 180.0f, gyrosBias.z * F_PI / 180.0f}; INSSetGyroBias(gyro_bias); xQueueReceive(magQueue, &ev, 100 / portTICK_RATE_MS); MagnetometerGet(&magData); // Set initial attitude AttitudeActualData attitudeActual; attitudeActual.Roll = atan2f(-accelsData.y, -accelsData.z) * 180.0f / F_PI; attitudeActual.Pitch = atan2f(accelsData.x, -accelsData.z) * 180.0f / F_PI; attitudeActual.Yaw = atan2f(-magData.y, magData.x) * 180.0f / F_PI; RPY2Quaternion(&attitudeActual.Roll,&attitudeActual.q1); AttitudeActualSet(&attitudeActual); q[0] = attitudeActual.q1; q[1] = attitudeActual.q2; q[2] = attitudeActual.q3; q[3] = attitudeActual.q4; INSSetState(pos, zeros, q, zeros, zeros); INSResetP(Pdiag); } else if (init_stage == 0 && outdoor_mode) { float Pdiag[16]={25.0f,25.0f,25.0f,5.0f,5.0f,5.0f,1e-5f,1e-5f,1e-5f,1e-5f,1e-5f,1e-5f,1e-5f,1e-4f,1e-4f,1e-4f}; float q[4]; float NED[3]; // Reset the INS algorithm INSGPSInit(); INSSetMagVar(revoCalibration.mag_var); INSSetAccelVar(revoCalibration.accel_var); INSSetGyroVar(revoCalibration.gyro_var); INSSetBaroVar(revoCalibration.baro_var); INSSetMagNorth(homeLocation.Be); // Initialize the gyro bias from the settings float gyro_bias[3] = {gyrosBias.x * F_PI / 180.0f, gyrosBias.y * F_PI / 180.0f, gyrosBias.z * F_PI / 180.0f}; INSSetGyroBias(gyro_bias); GPSPositionData gpsPosition; GPSPositionGet(&gpsPosition); // Transform the GPS position into NED coordinates getNED(&gpsPosition, NED); // Initialize barometric offset to cirrent GPS NED coordinate baroOffset = -NED[2] - baroData.Altitude; xQueueReceive(magQueue, &ev, 100 / portTICK_RATE_MS); MagnetometerGet(&magData); // Set initial attitude AttitudeActualData attitudeActual; attitudeActual.Roll = atan2f(-accelsData.y, -accelsData.z) * 180.0f / F_PI; attitudeActual.Pitch = atan2f(accelsData.x, -accelsData.z) * 180.0f / F_PI; attitudeActual.Yaw = atan2f(-magData.y, magData.x) * 180.0f / F_PI; RPY2Quaternion(&attitudeActual.Roll,&attitudeActual.q1); AttitudeActualSet(&attitudeActual); q[0] = attitudeActual.q1; q[1] = attitudeActual.q2; q[2] = attitudeActual.q3; q[3] = attitudeActual.q4; INSSetState(NED, zeros, q, zeros, zeros); INSResetP(Pdiag); } else if (init_stage > 0) { // Run prediction a bit before any corrections dT = PIOS_DELAY_DiffuS(ins_last_time) / 1.0e6f; GyrosBiasGet(&gyrosBias); float gyros[3] = {(gyrosData.x + gyrosBias.x) * F_PI / 180.0f, (gyrosData.y + gyrosBias.y) * F_PI / 180.0f, (gyrosData.z + gyrosBias.z) * F_PI / 180.0f}; INSStatePrediction(gyros, &accelsData.x, dT); AttitudeActualData attitude; AttitudeActualGet(&attitude); attitude.q1 = Nav.q[0]; attitude.q2 = Nav.q[1]; attitude.q3 = Nav.q[2]; attitude.q4 = Nav.q[3]; Quaternion2RPY(&attitude.q1,&attitude.Roll); AttitudeActualSet(&attitude); } init_stage++; if(init_stage > 10) inited = true; ins_last_time = PIOS_DELAY_GetRaw(); return 0; } if (!inited) return 0; dT = PIOS_DELAY_DiffuS(ins_last_time) / 1.0e6f; ins_last_time = PIOS_DELAY_GetRaw(); // This should only happen at start up or at mode switches if(dT > 0.01f) dT = 0.01f; else if(dT <= 0.001f) dT = 0.001f; // If the gyro bias setting was updated we should reset // the state estimate of the EKF if(gyroBiasSettingsUpdated) { float gyro_bias[3] = {gyrosBias.x * F_PI / 180.0f, gyrosBias.y * F_PI / 180.0f, gyrosBias.z * F_PI / 180.0f}; INSSetGyroBias(gyro_bias); gyroBiasSettingsUpdated = false; } // Because the sensor module remove the bias we need to add it // back in here so that the INS algorithm can track it correctly float gyros[3] = {gyrosData.x * F_PI / 180.0f, gyrosData.y * F_PI / 180.0f, gyrosData.z * F_PI / 180.0f}; if (revoCalibration.BiasCorrectedRaw == REVOCALIBRATION_BIASCORRECTEDRAW_TRUE) { gyros[0] += gyrosBias.x * F_PI / 180.0f; gyros[1] += gyrosBias.y * F_PI / 180.0f; gyros[2] += gyrosBias.z * F_PI / 180.0f; } // Advance the state estimate INSStatePrediction(gyros, &accelsData.x, dT); // Copy the attitude into the UAVO AttitudeActualData attitude; AttitudeActualGet(&attitude); attitude.q1 = Nav.q[0]; attitude.q2 = Nav.q[1]; attitude.q3 = Nav.q[2]; attitude.q4 = Nav.q[3]; Quaternion2RPY(&attitude.q1,&attitude.Roll); AttitudeActualSet(&attitude); // Advance the covariance estimate INSCovariancePrediction(dT); if(mag_updated) sensors |= MAG_SENSORS; if(baro_updated) sensors |= BARO_SENSOR; INSSetMagNorth(homeLocation.Be); if (gps_updated && outdoor_mode) { INSSetPosVelVar(revoCalibration.gps_var[REVOCALIBRATION_GPS_VAR_POS], revoCalibration.gps_var[REVOCALIBRATION_GPS_VAR_VEL]); sensors |= POS_SENSORS; if (0) { // Old code to take horizontal velocity from GPS Position update sensors |= HORIZ_SENSORS; vel[0] = gpsData.Groundspeed * cosf(gpsData.Heading * F_PI / 180.0f); vel[1] = gpsData.Groundspeed * sinf(gpsData.Heading * F_PI / 180.0f); vel[2] = 0; } // Transform the GPS position into NED coordinates getNED(&gpsData, NED); // Track barometric altitude offset with a low pass filter baroOffset = BARO_OFFSET_LOWPASS_ALPHA * baroOffset + (1.0f - BARO_OFFSET_LOWPASS_ALPHA ) * ( -NED[2] - baroData.Altitude ); } else if (!outdoor_mode) { INSSetPosVelVar(1e2f, 1e2f); vel[0] = vel[1] = vel[2] = 0; NED[0] = NED[1] = 0; NED[2] = -(baroData.Altitude + baroOffset); sensors |= HORIZ_SENSORS | HORIZ_POS_SENSORS; sensors |= POS_SENSORS |VERT_SENSORS; } if (gps_vel_updated && outdoor_mode) { sensors |= HORIZ_SENSORS | VERT_SENSORS; vel[0] = gpsVelData.North; vel[1] = gpsVelData.East; vel[2] = gpsVelData.Down; } /* * TODO: Need to add a general sanity check for all the inputs to make sure their kosher * although probably should occur within INS itself */ if (sensors) INSCorrection(&magData.x, NED, vel, ( baroData.Altitude + baroOffset ), sensors); // Copy the position and velocity into the UAVO PositionActualData positionActual; PositionActualGet(&positionActual); positionActual.North = Nav.Pos[0]; positionActual.East = Nav.Pos[1]; positionActual.Down = Nav.Pos[2]; PositionActualSet(&positionActual); VelocityActualData velocityActual; VelocityActualGet(&velocityActual); velocityActual.North = Nav.Vel[0]; velocityActual.East = Nav.Vel[1]; velocityActual.Down = Nav.Vel[2]; VelocityActualSet(&velocityActual); if (revoCalibration.BiasCorrectedRaw == REVOCALIBRATION_BIASCORRECTEDRAW_TRUE && !gyroBiasSettingsUpdated) { // Copy the gyro bias into the UAVO except when it was updated // from the settings during the calculation, then consume it // next cycle gyrosBias.x = Nav.gyro_bias[0] * 180.0f / F_PI; gyrosBias.y = Nav.gyro_bias[1] * 180.0f / F_PI; gyrosBias.z = Nav.gyro_bias[2] * 180.0f / F_PI; GyrosBiasSet(&gyrosBias); } return 0; }
/** * @brief FlightDataModel::setData Set the data at a given location * @param index Specifies both the row (waypoint) and column (field0 * @param value The new value * @param role Used by the Qt MVC to determine what to do. Should be Qt::EditRole * @return True if setting data succeeded, otherwise false */ bool FlightDataModel::setData(const QModelIndex &index, const QVariant &value, int role) { if (index.isValid() && role == Qt::EditRole) { PathPlanData *row = dataStorage.at(index.row()); // Do not allow changing any values except locked when the column is locked if (row->locked && index.column() != (int) FlightDataModel::LOCKED) return false; struct FlightDataModel::NED NED; QModelIndex otherIndex; switch(index.column()) { case WPDESCRIPTION: row->wpDescription=value.toString(); break; case LATPOSITION: row->latPosition=value.toDouble(); // Indicate this also changed the north otherIndex = this->index(index.row(), FlightDataModel::NED_NORTH); emit dataChanged(otherIndex,otherIndex); break; case LNGPOSITION: row->lngPosition=value.toDouble(); // Indicate this also changed the east otherIndex = this->index(index.row(), FlightDataModel::NED_EAST); emit dataChanged(otherIndex,otherIndex); break; case ALTITUDE: row->altitude=value.toDouble(); // Indicate this also changed the NED down otherIndex = this->index(index.row(), FlightDataModel::NED_DOWN); emit dataChanged(otherIndex,otherIndex); break; case NED_NORTH: NED = getNED(index.row()); NED.North = value.toDouble(); setNED(index.row(), NED); // Indicate this also changed the latitude otherIndex = this->index(index.row(), FlightDataModel::LATPOSITION); emit dataChanged(otherIndex,otherIndex); break; case NED_EAST: NED = getNED(index.row()); NED.East = value.toDouble(); setNED(index.row(), NED); // Indicate this also changed the longitude otherIndex = this->index(index.row(), FlightDataModel::LNGPOSITION); emit dataChanged(otherIndex,otherIndex); break; case NED_DOWN: NED = getNED(index.row()); NED.Down = value.toDouble(); setNED(index.row(), NED); // Indicate this also changed the altitude otherIndex = this->index(index.row(), FlightDataModel::ALTITUDE); emit dataChanged(otherIndex,otherIndex); break; case VELOCITY: row->velocity=value.toFloat(); break; case MODE: row->mode=value.toInt(); break; case MODE_PARAMS: row->mode_params=value.toFloat(); break; case LOCKED: row->locked = value.toBool(); break; default: return false; } emit dataChanged(index,index); return true; } return false; }
static int32_t updateAttitudeComplementary(bool first_run) { UAVObjEvent ev; GyrosData gyrosData; AccelsData accelsData; static int32_t timeval; float dT; static uint8_t init = 0; // Wait until the AttitudeRaw object is updated, if a timeout then go to failsafe if ( xQueueReceive(gyroQueue, &ev, FAILSAFE_TIMEOUT_MS / portTICK_RATE_MS) != pdTRUE || xQueueReceive(accelQueue, &ev, 1 / portTICK_RATE_MS) != pdTRUE ) { // When one of these is updated so should the other // Do not set attitude timeout warnings in simulation mode if (!AttitudeActualReadOnly()){ AlarmsSet(SYSTEMALARMS_ALARM_ATTITUDE,SYSTEMALARMS_ALARM_WARNING); return -1; } } AccelsGet(&accelsData); // During initialization and FlightStatusData flightStatus; FlightStatusGet(&flightStatus); if(first_run) { #if defined(PIOS_INCLUDE_HMC5883) // To initialize we need a valid mag reading if ( xQueueReceive(magQueue, &ev, 0 / portTICK_RATE_MS) != pdTRUE ) return -1; MagnetometerData magData; MagnetometerGet(&magData); #else MagnetometerData magData; magData.x = 100; magData.y = 0; magData.z = 0; #endif AttitudeActualData attitudeActual; AttitudeActualGet(&attitudeActual); init = 0; attitudeActual.Roll = atan2f(-accelsData.y, -accelsData.z) * 180.0f / F_PI; attitudeActual.Pitch = atan2f(accelsData.x, -accelsData.z) * 180.0f / F_PI; attitudeActual.Yaw = atan2f(-magData.y, magData.x) * 180.0f / F_PI; RPY2Quaternion(&attitudeActual.Roll,&attitudeActual.q1); AttitudeActualSet(&attitudeActual); timeval = PIOS_DELAY_GetRaw(); return 0; } if((init == 0 && xTaskGetTickCount() < 7000) && (xTaskGetTickCount() > 1000)) { // For first 7 seconds use accels to get gyro bias attitudeSettings.AccelKp = 1; attitudeSettings.AccelKi = 0.9; attitudeSettings.YawBiasRate = 0.23; magKp = 1; } else if ((attitudeSettings.ZeroDuringArming == ATTITUDESETTINGS_ZERODURINGARMING_TRUE) && (flightStatus.Armed == FLIGHTSTATUS_ARMED_ARMING)) { attitudeSettings.AccelKp = 1; attitudeSettings.AccelKi = 0.9; attitudeSettings.YawBiasRate = 0.23; magKp = 1; init = 0; } else if (init == 0) { // Reload settings (all the rates) AttitudeSettingsGet(&attitudeSettings); magKp = 0.01f; init = 1; } GyrosGet(&gyrosData); // Compute the dT using the cpu clock dT = PIOS_DELAY_DiffuS(timeval) / 1000000.0f; timeval = PIOS_DELAY_GetRaw(); float q[4]; AttitudeActualData attitudeActual; AttitudeActualGet(&attitudeActual); float grot[3]; float accel_err[3]; // Get the current attitude estimate quat_copy(&attitudeActual.q1, q); // Rotate gravity to body frame and cross with accels grot[0] = -(2 * (q[1] * q[3] - q[0] * q[2])); grot[1] = -(2 * (q[2] * q[3] + q[0] * q[1])); grot[2] = -(q[0] * q[0] - q[1]*q[1] - q[2]*q[2] + q[3]*q[3]); CrossProduct((const float *) &accelsData.x, (const float *) grot, accel_err); // Account for accel magnitude accel_mag = accelsData.x*accelsData.x + accelsData.y*accelsData.y + accelsData.z*accelsData.z; accel_mag = sqrtf(accel_mag); accel_err[0] /= accel_mag; accel_err[1] /= accel_mag; accel_err[2] /= accel_mag; if ( xQueueReceive(magQueue, &ev, 0) != pdTRUE ) { // Rotate gravity to body frame and cross with accels float brot[3]; float Rbe[3][3]; MagnetometerData mag; Quaternion2R(q, Rbe); MagnetometerGet(&mag); // If the mag is producing bad data don't use it (normally bad calibration) if (mag.x == mag.x && mag.y == mag.y && mag.z == mag.z) { rot_mult(Rbe, homeLocation.Be, brot); float mag_len = sqrtf(mag.x * mag.x + mag.y * mag.y + mag.z * mag.z); mag.x /= mag_len; mag.y /= mag_len; mag.z /= mag_len; float bmag = sqrtf(brot[0] * brot[0] + brot[1] * brot[1] + brot[2] * brot[2]); brot[0] /= bmag; brot[1] /= bmag; brot[2] /= bmag; // Only compute if neither vector is null if (bmag < 1 || mag_len < 1) mag_err[0] = mag_err[1] = mag_err[2] = 0; else CrossProduct((const float *) &mag.x, (const float *) brot, mag_err); } } else { mag_err[0] = mag_err[1] = mag_err[2] = 0; } // Accumulate integral of error. Scale here so that units are (deg/s) but Ki has units of s GyrosBiasData gyrosBias; GyrosBiasGet(&gyrosBias); gyrosBias.x -= accel_err[0] * attitudeSettings.AccelKi; gyrosBias.y -= accel_err[1] * attitudeSettings.AccelKi; gyrosBias.z -= mag_err[2] * magKi; GyrosBiasSet(&gyrosBias); // Correct rates based on error, integral component dealt with in updateSensors gyrosData.x += accel_err[0] * attitudeSettings.AccelKp / dT; gyrosData.y += accel_err[1] * attitudeSettings.AccelKp / dT; gyrosData.z += accel_err[2] * attitudeSettings.AccelKp / dT + mag_err[2] * magKp / dT; // Work out time derivative from INSAlgo writeup // Also accounts for the fact that gyros are in deg/s float qdot[4]; qdot[0] = (-q[1] * gyrosData.x - q[2] * gyrosData.y - q[3] * gyrosData.z) * dT * F_PI / 180 / 2; qdot[1] = (q[0] * gyrosData.x - q[3] * gyrosData.y + q[2] * gyrosData.z) * dT * F_PI / 180 / 2; qdot[2] = (q[3] * gyrosData.x + q[0] * gyrosData.y - q[1] * gyrosData.z) * dT * F_PI / 180 / 2; qdot[3] = (-q[2] * gyrosData.x + q[1] * gyrosData.y + q[0] * gyrosData.z) * dT * F_PI / 180 / 2; // Take a time step q[0] = q[0] + qdot[0]; q[1] = q[1] + qdot[1]; q[2] = q[2] + qdot[2]; q[3] = q[3] + qdot[3]; if(q[0] < 0) { q[0] = -q[0]; q[1] = -q[1]; q[2] = -q[2]; q[3] = -q[3]; } // Renomalize qmag = sqrtf(q[0]*q[0] + q[1]*q[1] + q[2]*q[2] + q[3]*q[3]); q[0] = q[0] / qmag; q[1] = q[1] / qmag; q[2] = q[2] / qmag; q[3] = q[3] / qmag; // If quaternion has become inappropriately short or is nan reinit. // THIS SHOULD NEVER ACTUALLY HAPPEN if((fabs(qmag) < 1.0e-3f) || (qmag != qmag)) { q[0] = 1; q[1] = 0; q[2] = 0; q[3] = 0; } quat_copy(q, &attitudeActual.q1); // Convert into eueler degrees (makes assumptions about RPY order) Quaternion2RPY(&attitudeActual.q1,&attitudeActual.Roll); AttitudeActualSet(&attitudeActual); // Flush these queues for avoid errors xQueueReceive(baroQueue, &ev, 0); if ( xQueueReceive(gpsQueue, &ev, 0) == pdTRUE && homeLocation.Set == HOMELOCATION_SET_TRUE ) { float NED[3]; // Transform the GPS position into NED coordinates GPSPositionData gpsPosition; GPSPositionGet(&gpsPosition); getNED(&gpsPosition, NED); PositionActualData positionActual; PositionActualGet(&positionActual); positionActual.North = NED[0]; positionActual.East = NED[1]; positionActual.Down = NED[2]; PositionActualSet(&positionActual); } if ( xQueueReceive(gpsVelQueue, &ev, 0) == pdTRUE ) { // Transform the GPS position into NED coordinates GPSVelocityData gpsVelocity; GPSVelocityGet(&gpsVelocity); VelocityActualData velocityActual; VelocityActualGet(&velocityActual); velocityActual.North = gpsVelocity.North; velocityActual.East = gpsVelocity.East; velocityActual.Down = gpsVelocity.Down; VelocityActualSet(&velocityActual); } AlarmsClear(SYSTEMALARMS_ALARM_ATTITUDE); return 0; }