/**
* @brief Trigger decoding happens here
* This method changes the state of trigger_state_s data structure according to the trigger event
*/
void TriggerState::decodeTriggerEvent(trigger_event_e const signal, efitime_t nowNt DECLARE_ENGINE_PARAMETER_S) {
efiAssertVoid(signal <= SHAFT_3RD_UP, "unexpected signal");
trigger_wheel_e triggerWheel = eventIndex[signal];
if (!engineConfiguration->useOnlyFrontForTrigger && curSignal == prevSignal) {
orderingErrorCounter++;
}
prevSignal = curSignal;
curSignal = signal;
eventCount[triggerWheel]++;
eventCountExt[signal]++;
efitime_t currentDurationLong = getCurrentGapDuration(nowNt);
/**
* For performance reasons, we want to work with 32 bit values. If there has been more then
* 10 seconds since previous trigger event we do not really care.
*/
currentDuration =
currentDurationLong > 10 * US2NT(US_PER_SECOND_LL) ? 10 * US2NT(US_PER_SECOND_LL) : currentDurationLong;
if (isLessImportant(signal)) {
#if EFI_UNIT_TEST
if (printTriggerDebug) {
printf("%s isLessImportant %s\r\n",
getTrigger_type_e(engineConfiguration->trigger.type),
getTrigger_event_e(signal));
}
#endif
/**
* For less important events we simply increment the index.
*/
nextTriggerEvent()
;
if (TRIGGER_SHAPE(gapBothDirections)) {
toothed_previous_duration = currentDuration;
isFirstEvent = false;
toothed_previous_time = nowNt;
}
return;
}
isFirstEvent = false;
// todo: skip a number of signal from the beginning
#if EFI_PROD_CODE
// scheduleMsg(&logger, "from %f to %f %d %d", triggerConfig->syncRatioFrom, triggerConfig->syncRatioTo, currentDuration, shaftPositionState->toothed_previous_duration);
// scheduleMsg(&logger, "ratio %f", 1.0 * currentDuration/ shaftPositionState->toothed_previous_duration);
#else
if (toothed_previous_duration != 0) {
// printf("ratio %f: cur=%d pref=%d\r\n", 1.0 * currentDuration / shaftPositionState->toothed_previous_duration,
// currentDuration, shaftPositionState->toothed_previous_duration);
}
#endif
bool_t isSynchronizationPoint;
if (TRIGGER_SHAPE(isSynchronizationNeeded)) {
isSynchronizationPoint = currentDuration > toothed_previous_duration * TRIGGER_SHAPE(syncRatioFrom)
&& currentDuration < toothed_previous_duration * TRIGGER_SHAPE(syncRatioTo);
#if EFI_PROD_CODE
if (engineConfiguration->isPrintTriggerSynchDetails) {
#else
if (printTriggerDebug) {
#endif /* EFI_PROD_CODE */
float gap = 1.0 * currentDuration / toothed_previous_duration;
#if EFI_PROD_CODE
scheduleMsg(logger, "gap=%f @ %d", gap, current_index);
#else
actualSynchGap = gap;
print("current gap %f\r\n", gap);
#endif /* EFI_PROD_CODE */
}
} else {
/**
* in case of noise the counter could be above the expected number of events
*/
int d = engineConfiguration->useOnlyFrontForTrigger ? 2 : 1;
isSynchronizationPoint = !shaft_is_synchronized || (current_index >= TRIGGER_SHAPE(size) - d);
}
#if EFI_UNIT_TEST
if (printTriggerDebug) {
printf("%s isSynchronizationPoint=%d index=%d %s\r\n",
getTrigger_type_e(engineConfiguration->trigger.type),
isSynchronizationPoint, current_index,
getTrigger_event_e(signal));
}
#endif
if (isSynchronizationPoint) {
/**
* We can check if things are fine by comparing the number of events in a cycle with the expected number of event.
*/
bool isDecodingError = eventCount[0] != TRIGGER_SHAPE(expectedEventCount[0])
|| eventCount[1] != TRIGGER_SHAPE(expectedEventCount[1])
|| eventCount[2] != TRIGGER_SHAPE(expectedEventCount[2]);
triggerDecoderErrorPin.setValue(isDecodingError);
if (isDecodingError) {
lastDecodingErrorTime = getTimeNowNt();
totalTriggerErrorCounter++;
if (engineConfiguration->isPrintTriggerSynchDetails) {
#if EFI_PROD_CODE
scheduleMsg(logger, "error: synchronizationPoint @ index %d expected %d/%d/%d got %d/%d/%d", current_index,
TRIGGER_SHAPE(expectedEventCount[0]), TRIGGER_SHAPE(expectedEventCount[1]),
TRIGGER_SHAPE(expectedEventCount[2]), eventCount[0], eventCount[1], eventCount[2]);
#endif /* EFI_PROD_CODE */
}
}
errorDetection.add(isDecodingError);
if (isTriggerDecoderError()) {
warning(OBD_PCM_Processor_Fault, "trigger decoding issue. expected %d/%d/%d got %d/%d/%d",
TRIGGER_SHAPE(expectedEventCount[0]), TRIGGER_SHAPE(expectedEventCount[1]),
TRIGGER_SHAPE(expectedEventCount[2]), eventCount[0], eventCount[1], eventCount[2]);
}
shaft_is_synchronized = true;
// this call would update duty cycle values
nextTriggerEvent()
;
nextRevolution();
} else {
nextTriggerEvent()
;
}
toothed_previous_duration = currentDuration;
toothed_previous_time = nowNt;
}
float getEngineCycle(operation_mode_e operationMode) {
return operationMode == TWO_STROKE ? 360 : 720;
}
void addSkippedToothTriggerEvents(trigger_wheel_e wheel, TriggerShape *s,
int totalTeethCount, int skippedCount,
float toothWidth,
float offset, float engineCycle, float filterLeft, float filterRight) {
efiAssertVoid(totalTeethCount > 0, "total count");
efiAssertVoid(skippedCount >= 0, "skipped count");
for (int i = 0; i < totalTeethCount - skippedCount - 1; i++) {
float angleDown = engineCycle / totalTeethCount * (i + (1 - toothWidth));
float angleUp = engineCycle / totalTeethCount * (i + 1);
s->addEvent(offset + angleDown, wheel, TV_HIGH, filterLeft, filterRight);
s->addEvent(offset + angleUp, wheel, TV_LOW, filterLeft, filterRight);
}
float angleDown = engineCycle / totalTeethCount * (totalTeethCount - skippedCount - 1 + (1 - toothWidth) );
s->addEvent(offset + angleDown, wheel, TV_HIGH, filterLeft, filterRight);
s->addEvent(offset + engineCycle, wheel, TV_LOW, filterLeft, filterRight);
}
/**
* @brief Prints current engine configuration to human-readable console.
*/
void printConfiguration(engine_configuration_s *engineConfiguration) {
scheduleMsg(&logger, "Template %s/%d trigger %s/%s/%d", getConfigurationName(engineConfiguration->engineType),
engineConfiguration->engineType, getTrigger_type_e(engineConfiguration->trigger.type),
getEngine_load_mode_e(engineConfiguration->algorithm), engineConfiguration->algorithm);
scheduleMsg(&logger, "configurationVersion=%d", getGlobalConfigurationVersion());
for (int k = 0; k < FUEL_LOAD_COUNT; k++) {
// print("line %d (%f): ", k, engineConfiguration->fuelKeyBins[k]);
// for (int r = 0; r < FUEL_RPM_COUNT; r++) {
// print("%f ", engineConfiguration->fuelTable[k][r]);
// }
// print("\r\n");
}
// printFloatArray("RPM bin: ", config->fuelRpmBins, FUEL_RPM_COUNT);
//
// printFloatArray("Y bin: ", config->fuelLoadBins, FUEL_LOAD_COUNT);
//
// printFloatArray("CLT: ", config->cltFuelCorr, CLT_CURVE_SIZE);
// printFloatArray("CLT bins: ", config->cltFuelCorrBins, CLT_CURVE_SIZE);
//
// printFloatArray("IAT: ", config->iatFuelCorr, IAT_CURVE_SIZE);
// printFloatArray("IAT bins: ", config->iatFuelCorrBins, IAT_CURVE_SIZE);
//
// printFloatArray("vBatt: ", engineConfiguration->injector.battLagCorr, VBAT_INJECTOR_CURVE_SIZE);
// printFloatArray("vBatt bins: ", engineConfiguration->injector.battLagCorrBins, VBAT_INJECTOR_CURVE_SIZE);
scheduleMsg(&logger, "rpmHardLimit: %d/operationMode=%d", engineConfiguration->rpmHardLimit,
engineConfiguration->operationMode);
scheduleMsg(&logger, "globalTriggerAngleOffset=%f", engineConfiguration->globalTriggerAngleOffset);
scheduleMsg(&logger, "=== cranking ===");
scheduleMsg(&logger, "crankingRpm: %d", engineConfiguration->cranking.rpm);
scheduleMsg(&logger, "cranking injection %s", getInjection_mode_e(engineConfiguration->crankingInjectionMode));
if (engineConfiguration->useConstantDwellDuringCranking) {
scheduleMsg(&logger, "ignitionDwellForCrankingMs=%f", engineConfiguration->ignitionDwellForCrankingMs);
} else {
scheduleMsg(&logger, "cranking charge charge angle=%f fire at %f", engineConfiguration->crankingChargeAngle,
engineConfiguration->crankingTimingAngle);
}
scheduleMsg(&logger, "=== ignition ===");
scheduleMsg(&logger, "ignitionMode: %s/enabled=%s", getIgnition_mode_e(engineConfiguration->ignitionMode),
boolToString(engineConfiguration->isIgnitionEnabled));
scheduleMsg(&logger, "timingMode: %s", getTiming_mode_e(engineConfiguration->timingMode));
if (engineConfiguration->timingMode == TM_FIXED) {
scheduleMsg(&logger, "fixedModeTiming: %d", (int) engineConfiguration->fixedModeTiming);
}
scheduleMsg(&logger, "ignitionOffset=%f", engineConfiguration->ignitionOffset);
scheduleMsg(&logger, "=== injection ===");
scheduleMsg(&logger, "injection %s offset=%f/enabled=%s", getInjection_mode_e(engineConfiguration->injectionMode),
(double) engineConfiguration->injectionOffset, boolToString(engineConfiguration->isInjectionEnabled));
printOutputs(engineConfiguration);
scheduleMsg(&logger, "map_avg=%s/mil=%s/fp=%s/ts=%s/wa=%s/it=%s/fastAdc=%s",
boolToString(engineConfiguration->isMapAveragingEnabled), boolToString(engineConfiguration->isMilEnabled),
boolToString(engineConfiguration->isFuelPumpEnabled),
boolToString(engineConfiguration->isTunerStudioEnabled),
boolToString(engineConfiguration->isWaveAnalyzerEnabled),
boolToString(engineConfiguration->isIdleThreadEnabled), boolToString(boardConfiguration->isFastAdcEnabled));
scheduleMsg(&logger, "isManualSpinningMode=%s/isCylinderCleanupEnabled=%s",
boolToString(engineConfiguration->isManualSpinningMode),
boolToString(engineConfiguration->isCylinderCleanupEnabled));
scheduleMsg(&logger, "clutchUp@%s: %s", hwPortname(boardConfiguration->clutchUpPin),
boolToString(engine->clutchUpState));
scheduleMsg(&logger, "clutchDown@%s: %s", hwPortname(boardConfiguration->clutchDownPin),
boolToString(engine->clutchDownState));
scheduleMsg(&logger, "boardTestModeJumperPin: %s/nesting=%d",
hwPortname(boardConfiguration->boardTestModeJumperPin), maxNesting);
scheduleMsg(&logger, "digitalPotentiometerSpiDevice %d", boardConfiguration->digitalPotentiometerSpiDevice);
for (int i = 0; i < DIGIPOT_COUNT; i++) {
scheduleMsg(&logger, "digitalPotentiometer CS%d %s", i,
hwPortname(boardConfiguration->digitalPotentiometerChipSelect[i]));
}
#if EFI_PROD_CODE
printSpiState(&logger, boardConfiguration);
#endif /* EFI_PROD_CODE */
}
/**
* @brief Trigger decoding happens here
* This method is invoked every time we have a fall or rise on one of the trigger sensors.
* This method changes the state of trigger_state_s data structure according to the trigger event
* @param signal type of event which just happened
* @param nowNt current time
*/
void TriggerState::decodeTriggerEvent(trigger_event_e const signal, efitime_t nowNt DECLARE_ENGINE_PARAMETER_S) {
efiAssertVoid(signal <= SHAFT_3RD_UP, "unexpected signal");
trigger_wheel_e triggerWheel = eventIndex[signal];
if (!engineConfiguration->useOnlyFrontForTrigger && curSignal == prevSignal) {
orderingErrorCounter++;
}
prevSignal = curSignal;
curSignal = signal;
currentCycle.eventCount[triggerWheel]++;
efitime_t currentDurationLong = getCurrentGapDuration(nowNt);
/**
* For performance reasons, we want to work with 32 bit values. If there has been more then
* 10 seconds since previous trigger event we do not really care.
*/
currentDuration =
currentDurationLong > 10 * US2NT(US_PER_SECOND_LL) ? 10 * US2NT(US_PER_SECOND_LL) : currentDurationLong;
bool isPrimary = triggerWheel == T_PRIMARY;
if (isLessImportant(signal)) {
#if EFI_UNIT_TEST || defined(__DOXYGEN__)
if (printTriggerDebug) {
printf("%s isLessImportant %s %d\r\n",
getTrigger_type_e(engineConfiguration->trigger.type),
getTrigger_event_e(signal),
nowNt);
}
#endif
/**
* For less important events we simply increment the index.
*/
nextTriggerEvent()
;
if (TRIGGER_SHAPE(gapBothDirections) && considerEventForGap()) {
isFirstEvent = false;
thirdPreviousDuration = durationBeforePrevious;
durationBeforePrevious = toothed_previous_duration;
toothed_previous_duration = currentDuration;
toothed_previous_time = nowNt;
}
} else {
#if EFI_UNIT_TEST || defined(__DOXYGEN__)
if (printTriggerDebug) {
printf("%s event %s %d\r\n",
getTrigger_type_e(engineConfiguration->trigger.type),
getTrigger_event_e(signal),
nowNt);
}
#endif
isFirstEvent = false;
// todo: skip a number of signal from the beginning
#if EFI_PROD_CODE || defined(__DOXYGEN__)
// scheduleMsg(&logger, "from %f to %f %d %d", triggerConfig->syncRatioFrom, triggerConfig->syncRatioTo, currentDuration, shaftPositionState->toothed_previous_duration);
// scheduleMsg(&logger, "ratio %f", 1.0 * currentDuration/ shaftPositionState->toothed_previous_duration);
#else
if (toothed_previous_duration != 0) {
// printf("ratio %f: cur=%d pref=%d\r\n", 1.0 * currentDuration / shaftPositionState->toothed_previous_duration,
// currentDuration, shaftPositionState->toothed_previous_duration);
}
#endif
bool isSynchronizationPoint;
if (TRIGGER_SHAPE(isSynchronizationNeeded)) {
/**
* Here I prefer to have two multiplications instead of one division, that's a micro-optimization
*/
isSynchronizationPoint =
currentDuration > toothed_previous_duration * TRIGGER_SHAPE(syncRatioFrom)
&& currentDuration < toothed_previous_duration * TRIGGER_SHAPE(syncRatioTo)
&& toothed_previous_duration > durationBeforePrevious * TRIGGER_SHAPE(secondSyncRatioFrom)
&& toothed_previous_duration < durationBeforePrevious * TRIGGER_SHAPE(secondSyncRatioTo)
// this is getting a little out of hand, any ideas?
&& durationBeforePrevious > thirdPreviousDuration * TRIGGER_SHAPE(thirdSyncRatioFrom)
&& durationBeforePrevious < thirdPreviousDuration * TRIGGER_SHAPE(thirdSyncRatioTo)
;
#if EFI_PROD_CODE || defined(__DOXYGEN__)
if (engineConfiguration->isPrintTriggerSynchDetails || someSortOfTriggerError) {
#else
if (printTriggerDebug) {
#endif /* EFI_PROD_CODE */
float gap = 1.0 * currentDuration / toothed_previous_duration;
float prevGap = 1.0 * toothed_previous_duration / durationBeforePrevious;
float gap3 = 1.0 * durationBeforePrevious / thirdPreviousDuration;
#if EFI_PROD_CODE || defined(__DOXYGEN__)
scheduleMsg(logger, "gap=%f/%f/%f @ %d while expected %f/%f and %f/%f error=%d",
gap, prevGap, gap3,
currentCycle.current_index,
TRIGGER_SHAPE(syncRatioFrom), TRIGGER_SHAPE(syncRatioTo),
TRIGGER_SHAPE(secondSyncRatioFrom), TRIGGER_SHAPE(secondSyncRatioTo), someSortOfTriggerError);
#else
actualSynchGap = gap;
print("current gap %f/%f/%f c=%d prev=%d\r\n", gap, prevGap, gap3, currentDuration, toothed_previous_duration);
#endif /* EFI_PROD_CODE */
}
} else {
/**
* in case of noise the counter could be above the expected number of events
*/
int d = engineConfiguration->useOnlyFrontForTrigger ? 2 : 1;
isSynchronizationPoint = !shaft_is_synchronized || (currentCycle.current_index >= TRIGGER_SHAPE(size) - d);
}
#if EFI_UNIT_TEST || defined(__DOXYGEN__)
if (printTriggerDebug) {
printf("%s isSynchronizationPoint=%d index=%d %s\r\n",
getTrigger_type_e(engineConfiguration->trigger.type),
isSynchronizationPoint, currentCycle.current_index,
getTrigger_event_e(signal));
}
#endif
if (isSynchronizationPoint) {
/**
* We can check if things are fine by comparing the number of events in a cycle with the expected number of event.
*/
bool isDecodingError = currentCycle.eventCount[0] != TRIGGER_SHAPE(expectedEventCount[0])
|| currentCycle.eventCount[1] != TRIGGER_SHAPE(expectedEventCount[1])
|| currentCycle.eventCount[2] != TRIGGER_SHAPE(expectedEventCount[2]);
triggerDecoderErrorPin.setValue(isDecodingError);
if (isDecodingError) {
lastDecodingErrorTime = getTimeNowNt();
someSortOfTriggerError = true;
totalTriggerErrorCounter++;
if (engineConfiguration->isPrintTriggerSynchDetails || someSortOfTriggerError) {
#if EFI_PROD_CODE || defined(__DOXYGEN__)
scheduleMsg(logger, "error: synchronizationPoint @ index %d expected %d/%d/%d got %d/%d/%d",
currentCycle.current_index, TRIGGER_SHAPE(expectedEventCount[0]),
TRIGGER_SHAPE(expectedEventCount[1]), TRIGGER_SHAPE(expectedEventCount[2]),
currentCycle.eventCount[0], currentCycle.eventCount[1], currentCycle.eventCount[2]);
#endif /* EFI_PROD_CODE */
}
}
errorDetection.add(isDecodingError);
if (isTriggerDecoderError()) {
warning(OBD_PCM_Processor_Fault, "trigger decoding issue. expected %d/%d/%d got %d/%d/%d",
TRIGGER_SHAPE(expectedEventCount[0]), TRIGGER_SHAPE(expectedEventCount[1]),
TRIGGER_SHAPE(expectedEventCount[2]), currentCycle.eventCount[0], currentCycle.eventCount[1],
currentCycle.eventCount[2]);
}
shaft_is_synchronized = true;
// this call would update duty cycle values
nextTriggerEvent()
;
nextRevolution();
} else {
nextTriggerEvent()
;
}
thirdPreviousDuration = durationBeforePrevious;
durationBeforePrevious = toothed_previous_duration;
toothed_previous_duration = currentDuration;
toothed_previous_time = nowNt;
}
if (!isValidIndex(PASS_ENGINE_PARAMETER_F)) {
warning(OBD_PCM_Processor_Fault, "unexpected eventIndex=%d while size %d", currentCycle.current_index, TRIGGER_SHAPE(size));
lastDecodingErrorTime = getTimeNowNt();
someSortOfTriggerError = true;
}
if (someSortOfTriggerError) {
if (getTimeNowNt() - lastDecodingErrorTime > US2NT(US_PER_SECOND_LL)) {
someSortOfTriggerError = false;
}
}
if (ENGINE(sensorChartMode) == SC_RPM_ACCEL || ENGINE(sensorChartMode) == SC_DETAILED_RPM) {
angle_t currentAngle = TRIGGER_SHAPE(eventAngles[currentCycle.current_index]);
// todo: make this '90' depend on cylinder count?
angle_t prevAngle = currentAngle - 90;
fixAngle(prevAngle);
// todo: prevIndex should be pre-calculated
int prevIndex = TRIGGER_SHAPE(triggerIndexByAngle[(int)prevAngle]);
// now let's get precise angle for that event
prevAngle = TRIGGER_SHAPE(eventAngles[prevIndex]);
// todo: re-implement this as a subclass. we need two instances of
// uint32_t time = nowNt - timeOfLastEvent[prevIndex];
angle_t angleDiff = currentAngle - prevAngle;
// todo: angle diff should be pre-calculated
fixAngle(angleDiff);
// float r = (60000000.0 / 360 * US_TO_NT_MULTIPLIER) * angleDiff / time;
#if EFI_SENSOR_CHART || defined(__DOXYGEN__)
if (boardConfiguration->sensorChartMode == SC_DETAILED_RPM) {
// scAddData(currentAngle, r);
} else {
// scAddData(currentAngle, r / instantRpmValue[prevIndex]);
}
#endif
// instantRpmValue[currentCycle.current_index] = r;
// timeOfLastEvent[currentCycle.current_index] = nowNt;
}
}
angle_t getEngineCycle(operation_mode_e operationMode) {
return operationMode == TWO_STROKE ? 360 : 720;
}
void addSkippedToothTriggerEvents(trigger_wheel_e wheel, TriggerShape *s, int totalTeethCount, int skippedCount,
float toothWidth, float offset, float engineCycle, float filterLeft, float filterRight) {
efiAssertVoid(totalTeethCount > 0, "total count");
efiAssertVoid(skippedCount >= 0, "skipped count");
for (int i = 0; i < totalTeethCount - skippedCount - 1; i++) {
float angleDown = engineCycle / totalTeethCount * (i + (1 - toothWidth));
float angleUp = engineCycle / totalTeethCount * (i + 1);
s->addEvent(offset + angleDown, wheel, TV_RISE, filterLeft, filterRight);
s->addEvent(offset + angleUp, wheel, TV_FALL, filterLeft, filterRight);
}
float angleDown = engineCycle / totalTeethCount * (totalTeethCount - skippedCount - 1 + (1 - toothWidth));
s->addEvent(offset + angleDown, wheel, TV_RISE, filterLeft, filterRight);
s->addEvent(offset + engineCycle, wheel, TV_FALL, filterLeft, filterRight);
}
void triggerInfo(Engine *engine) {
#if (EFI_PROD_CODE || EFI_SIMULATOR) || defined(__DOXYGEN__)
TriggerShape *ts = &engine->triggerShape;
scheduleMsg(logger, "Template %s (%d) trigger %s (%d) useRiseEdge=%s onlyFront=%s",
getConfigurationName(engineConfiguration->engineType), engineConfiguration->engineType,
getTrigger_type_e(engineConfiguration->trigger.type), engineConfiguration->trigger.type,
boolToString(TRIGGER_SHAPE(useRiseEdge)), boolToString(engineConfiguration->useOnlyFrontForTrigger));
scheduleMsg(logger, "trigger#1 event counters up=%d/down=%d", triggerCentral.getHwEventCounter(0),
triggerCentral.getHwEventCounter(1));
if (engine->triggerShape.needSecondTriggerInput) {
scheduleMsg(logger, "trigger#2 event counters up=%d/down=%d", triggerCentral.getHwEventCounter(2),
triggerCentral.getHwEventCounter(3));
}
scheduleMsg(logger, "expected cycle events %d/%d/%d", ts->expectedEventCount[0],
engine->triggerShape.expectedEventCount[1], ts->expectedEventCount[2]);
scheduleMsg(logger, "trigger type=%d/need2ndChannel=%s", engineConfiguration->trigger.type,
boolToString(engine->triggerShape.needSecondTriggerInput));
scheduleMsg(logger, "expected duty #0=%f/#1=%f", ts->dutyCycle[0], ts->dutyCycle[1]);
scheduleMsg(logger, "isError %s/total errors=%d ord_err=%d/total revolutions=%d/self=%s",
boolToString(isTriggerDecoderError()), triggerCentral.triggerState.totalTriggerErrorCounter,
triggerCentral.triggerState.orderingErrorCounter, triggerCentral.triggerState.getTotalRevolutionCounter(),
boolToString(engineConfiguration->directSelfStimulation));
if (ts->isSynchronizationNeeded) {
scheduleMsg(logger, "gap from %f to %f", ts->syncRatioFrom, ts->syncRatioTo);
}
#endif
#if EFI_PROD_CODE
scheduleMsg(logger,
"sn=%s ignitionMathTime=%d schTime=%d injectonSchTime=%d zeroTestTime=%d advanceTime=%d triggerMaxDuration=%d",
boolToString(ts->isSynchronizationNeeded), engine->m.ignitionMathTime, engine->m.ignitionSchTime,
engine->m.injectonSchTime, engine->m.zeroTestTime, engine->m.advanceTime, triggerMaxDuration);
triggerMaxDuration = 0;
scheduleMsg(logger, "maxLockTime=%d / maxTriggerReentraint=%d", maxLockTime, maxTriggerReentraint);
scheduleMsg(logger, "maxEventQueueTime=%d", maxEventQueueTime);
scheduleMsg(logger, "primary trigger input: %s", hwPortname(boardConfiguration->triggerInputPins[0]));
scheduleMsg(logger, "primary trigger simulator: %s %s freq=%d",
hwPortname(boardConfiguration->triggerSimulatorPins[0]),
getPin_output_mode_e(boardConfiguration->triggerSimulatorPinModes[0]),
boardConfiguration->triggerSimulatorFrequency);
if (engine->triggerShape.needSecondTriggerInput) {
scheduleMsg(logger, "secondary trigger input: %s", hwPortname(boardConfiguration->triggerInputPins[1]));
#if EFI_EMULATE_POSITION_SENSORS || defined(__DOXYGEN__)
scheduleMsg(logger, "secondary trigger simulator: %s %s phase=%d",
hwPortname(boardConfiguration->triggerSimulatorPins[1]),
getPin_output_mode_e(boardConfiguration->triggerSimulatorPinModes[1]), triggerSignal.safe.phaseIndex);
#endif /* EFI_EMULATE_POSITION_SENSORS */
}
// scheduleMsg(logger, "3rd trigger simulator: %s %s", hwPortname(boardConfiguration->triggerSimulatorPins[2]),
// getPin_output_mode_e(boardConfiguration->triggerSimulatorPinModes[2]));
scheduleMsg(logger, "trigger error extra LED: %s %s", hwPortname(boardConfiguration->triggerErrorPin),
getPin_output_mode_e(boardConfiguration->triggerErrorPinMode));
scheduleMsg(logger, "primary logic input: %s", hwPortname(boardConfiguration->logicAnalyzerPins[0]));
scheduleMsg(logger, "secondary logic input: %s", hwPortname(boardConfiguration->logicAnalyzerPins[1]));
#endif /* EFI_PROD_CODE */
}
addSkippedToothTriggerEvents(T_SECONDARY, s, totalTeethCount, skippedCount, 0.5, 360, 360, NO_LEFT_FILTER,
NO_RIGHT_FILTER);
s->isSynchronizationNeeded = false;
}
static TriggerState state CCM_OPTIONAL;
/**
* External logger is needed because at this point our logger is not yet initialized
*/
void TriggerShape::initializeTriggerShape(Logging *logger DECLARE_ENGINE_PARAMETER_S) {
const trigger_config_s *triggerConfig = &engineConfiguration->trigger;
#if EFI_PROD_CODE || defined(__DOXYGEN__)
efiAssertVoid(getRemainingStack(chThdSelf()) > 256, "init t");
scheduleMsg(logger, "initializeTriggerShape(%s/%d)", getTrigger_type_e(triggerConfig->type), (int) triggerConfig->type);
#endif
TriggerShape *triggerShape = this;
switch (triggerConfig->type) {
case TT_TOOTHED_WHEEL:
initializeSkippedToothTriggerShapeExt(triggerShape, triggerConfig->customTotalToothCount,
triggerConfig->customSkippedToothCount, engineConfiguration->operationMode);
break;
case TT_MAZDA_MIATA_NA:
initializeMazdaMiataNaShape(triggerShape PASS_ENGINE_PARAMETER);
break;
