void
/* Flag = 0x0000 = default */
/* Flag & 0x0001 = list ChromCast's */
/* Flag & 0x0002 = list Technology choice */
usage(int flag, char *diag, ...) {
disppath **dp;
icompaths *icmps = new_icompaths(0);
inst2_capability cap = 0;
fprintf(stderr,"Create CCMX or CCSS, Version %s\n",ARGYLL_VERSION_STR);
fprintf(stderr,"Author: Graeme W. Gill, licensed under the AGPL Version 3\n");
if (diag != NULL) {
va_list args;
fprintf(stderr,"Diagnostic: ");
va_start(args, diag);
vfprintf(stderr, diag, args);
va_end(args);
fprintf(stderr,"\n");
}
fprintf(stderr,"usage: ccmxmake -t dtech [-options] output.ccmx\n");
fprintf(stderr," -v Verbose mode\n");
fprintf(stderr," -S Create CCSS rather than CCMX\n");
fprintf(stderr," -f ref.ti3[,targ.ti3] Create from one or two .ti3 files rather than measure.\n");
#if defined(UNIX_X11)
fprintf(stderr," -display displayname Choose X11 display name\n");
fprintf(stderr," -d n[,m] Choose the display n from the following list (default 1)\n");
fprintf(stderr," Optionally choose different display m for VideoLUT access\n");
#else
fprintf(stderr," -d n Choose the display from the following list (default 1)\n");
#endif
dp = get_displays();
if (dp == NULL || dp[0] == NULL)
fprintf(stderr," ** No displays found **\n");
else {
int i;
for (i = 0; ; i++) {
if (dp[i] == NULL)
break;
fprintf(stderr," %d name = '%s'\n",i+1,dp[i]->name);
fprintf(stderr," %d = '%s'\n",i+1,dp[i]->description);
}
}
free_disppaths(dp);
fprintf(stderr," -dweb[:port] Display via a web server at port (default 8080)\n");
fprintf(stderr," -dcc[:n] Display via n'th ChromeCast (default 1, ? for list)\n");
if (flag & 0x001) {
ccast_id **ids;
if ((ids = get_ccids()) == NULL) {
fprintf(stderr," ** Error discovering ChromCasts **\n");
} else {
if (ids[0] == NULL)
fprintf(stderr," ** No ChromCasts found **\n");
else {
int i;
for (i = 0; ids[i] != NULL; i++)
fprintf(stderr," %d = '%s'\n",i+1,ids[i]->name);
free_ccids(ids);
}
}
}
#ifdef NT
fprintf(stderr," -dmadvr Display via MadVR Video Renderer\n");
#endif
// fprintf(stderr," -d fake Use a fake display device for testing, fake%s if present\n",ICC_FILE_EXT);
fprintf(stderr," -p Use telephoto mode (ie. for a projector) (if available)\n");
cap = inst_show_disptype_options(stderr, " -y c|l ", icmps, 1);
fprintf(stderr," -z disptype Different display type for spectrometer (see -y)\n");
fprintf(stderr," -P ho,vo,ss[,vs] Position test window and scale it\n");
fprintf(stderr," ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc.\n");
fprintf(stderr," ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.\n");
fprintf(stderr," -F Fill whole screen with black background\n");
#if defined(UNIX_X11)
fprintf(stderr," -n Don't set override redirect on test window\n");
#endif
fprintf(stderr," -N Disable initial calibration of instrument if possible\n");
fprintf(stderr," -H Use high resolution spectrum mode (if available)\n");
// fprintf(stderr," -V Use adaptive measurement mode (if available)\n");
fprintf(stderr," -C \"command\" Invoke shell \"command\" each time a color is set\n");
fprintf(stderr," -o observ Choose CIE Observer for CCMX spectrometer data:\n");
fprintf(stderr," 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2\n");
fprintf(stderr," -s steps Override default patch sequence combination steps (default %d)\n",DEFAULT_MSTEPS);
fprintf(stderr," -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff\n");
fprintf(stderr," -D [level] Print debug diagnostics to stderr\n");
fprintf(stderr," -E desciption Override the default overall description\n");
fprintf(stderr," -I displayname Set display make and model description (optional)\n");
if (flag & 0x0002) {
int i;
disptech_info *list = disptech_get_list();
for (i = 0; list[i].dtech != disptech_end; i++)
fprintf(stderr," %s %s %s\n",i == 0 ? "-t" : " ", list[i].lsel,list[i].desc);
} else {
fprintf(stderr," -t dtech Set display technology type\n");
fprintf(stderr," (Use -?? to list technology choices)\n");
}
fprintf(stderr," -U c Set UI selection character(s)\n");
fprintf(stderr," -Y r|n Set or override refresh/non-refresh display type\n");
fprintf(stderr," -Y R:rate Override measured refresh rate with rate Hz\n");
fprintf(stderr," -Y A Use non-adaptive integration time mode (if available).\n");
fprintf(stderr," correction.ccmx | calibration.ccss\n");
fprintf(stderr," File to save result to\n");
if (icmps != NULL)
icmps->del(icmps);
exit(1);
}
manager_t::manager_t()
{
init();
get_displays();
}
void usage(char *diag, ...) {
disppath **dp;
icoms *icom;
fprintf(stderr,"Read a Display, Version %s\n",ARGYLL_VERSION_STR);
fprintf(stderr,"Author: Graeme W. Gill, licensed under the GPL Version 3\n");
if (setup_spyd2(NULL) == 2)
fprintf(stderr,"WARNING: This file contains a proprietary firmware image, and may not be freely distributed !\n");
if (diag != NULL) {
va_list args;
fprintf(stderr,"Diagnostic: ");
va_start(args, diag);
vfprintf(stderr, diag, args);
va_end(args);
fprintf(stderr,"\n");
}
fprintf(stderr,"usage: dispread [options] outfile\n");
fprintf(stderr," -v Verbose mode\n");
#if defined(UNIX) && !defined(__APPLE__)
fprintf(stderr," -display displayname Choose X11 display name\n");
fprintf(stderr," -d n[,m] Choose the display n from the following list (default 1)\n");
fprintf(stderr," Optionally choose different display m for VideoLUT access\n");
#else
fprintf(stderr," -d n Choose the display from the following list (default 1)\n");
#endif
// fprintf(stderr," -d fake Use a fake display device for testing, fake%s if present\n",ICC_FILE_EXT);
dp = get_displays();
if (dp == NULL || dp[0] == NULL)
fprintf(stderr," ** No displays found **\n");
else {
int i;
for (i = 0; ; i++) {
if (dp[i] == NULL)
break;
fprintf(stderr," %d = '%s'\n",i+1,dp[i]->description);
}
}
free_disppaths(dp);
fprintf(stderr," -c listno Set communication port from the following list (default %d)\n",COMPORT);
if ((icom = new_icoms()) != NULL) {
icompath **paths;
if ((paths = icom->get_paths(icom)) != NULL) {
int i;
for (i = 0; ; i++) {
if (paths[i] == NULL)
break;
if (strlen(paths[i]->path) >= 8
&& strcmp(paths[i]->path+strlen(paths[i]->path)-8, "Spyder2)") == 0
&& setup_spyd2(NULL) == 0)
fprintf(stderr," %d = '%s' !! Disabled - no firmware !!\n",i+1,paths[i]->path);
else
fprintf(stderr," %d = '%s'\n",i+1,paths[i]->path);
}
} else
fprintf(stderr," ** No ports found **\n");
icom->del(icom);
}
fprintf(stderr," -p Use projector mode (if available)\n");
fprintf(stderr," -y c|l Display type, c = CRT, l = LCD\n");
fprintf(stderr," -k file.cal Apply display calibration file while reading\n");
fprintf(stderr," -s Save spectral information (default don't save)\n");
fprintf(stderr," -P ho,vo,ss Position test window and scale it\n");
fprintf(stderr," ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc.\n");
fprintf(stderr," ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.\n");
fprintf(stderr," -F Fill whole screen with black background\n");
#if defined(UNIX) && !defined(__APPLE__)
fprintf(stderr," -n Don't set override redirect on test window\n");
#endif
fprintf(stderr," -K Run instrument calibration first (used rarely)\n");
fprintf(stderr," -N Disable auto calibration of instrument\n");
fprintf(stderr," -H Use high resolution spectrum mode (if available)\n");
fprintf(stderr," -C \"command\" Invoke shell \"command\" each time a color is set\n");
fprintf(stderr," -M \"command\" Invoke shell \"command\" each time a color is measured\n");
fprintf(stderr," -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff\n");
fprintf(stderr," -D [level] Print debug diagnostics to stderr\n");
fprintf(stderr," outfile Base name for input[ti1]/output[ti3] file\n");
exit(1);
}