int main(int argc, char **argv)
{
int mgmt_classes[3] =
{ IB_SMI_CLASS, IB_SMI_DIRECT_CLASS, IB_SA_CLASS };
ib_portid_t portid = { 0 };
int port_op = -1;
int is_switch, is_peer_switch, espeed_cap, peer_espeed_cap;
int state, physstate, lwe, lws, lwa, lse, lss, lsa, lsee, lses, lsea,
fdr10s, fdr10e, fdr10a;
int peerlocalportnum, peerlwe, peerlws, peerlwa, peerlse, peerlss,
peerlsa, peerlsee, peerlses, peerlsea, peerfdr10s, peerfdr10e,
peerfdr10a;
int peerwidth, peerspeed, peerespeed;
uint8_t data[IB_SMP_DATA_SIZE] = { 0 };
uint8_t data2[IB_SMP_DATA_SIZE] = { 0 };
ib_portid_t peerportid = { 0 };
int portnum = 0;
ib_portid_t selfportid = { 0 };
int selfport = 0;
int changed = 0;
int i;
uint32_t vendorid, rem_vendorid;
uint16_t devid, rem_devid;
uint64_t val;
char *endp;
char usage_args[] = "<dest dr_path|lid|guid> <portnum> [<op>]\n"
"\nSupported ops: enable, disable, on, off, reset, speed, espeed, fdr10,\n"
"\twidth, query, down, arm, active, vls, mtu, lid, smlid, lmc,\n"
"\tmkey, mkeylease, mkeyprot\n";
const char *usage_examples[] = {
"3 1 disable\t\t\t# by lid",
"-G 0x2C9000100D051 1 enable\t# by guid",
"-D 0 1\t\t\t# (query) by direct route",
"3 1 reset\t\t\t# by lid",
"3 1 speed 1\t\t\t# by lid",
"3 1 width 1\t\t\t# by lid",
"-D 0 1 lid 0x1234 arm\t\t# by direct route",
NULL
};
ibdiag_process_opts(argc, argv, NULL, NULL, NULL, NULL,
usage_args, usage_examples);
argc -= optind;
argv += optind;
if (argc < 2)
ibdiag_show_usage();
srcport = mad_rpc_open_port(ibd_ca, ibd_ca_port, mgmt_classes, 3);
if (!srcport)
IBEXIT("Failed to open '%s' port '%d'", ibd_ca, ibd_ca_port);
smp_mkey_set(srcport, ibd_mkey);
if (resolve_portid_str(ibd_ca, ibd_ca_port, &portid, argv[0],
ibd_dest_type, ibd_sm_id, srcport) < 0)
IBEXIT("can't resolve destination port %s", argv[0]);
if (argc > 1)
portnum = strtol(argv[1], 0, 0);
for (i = 2; i < argc; i++) {
int j;
for (j = 0; j < NPORT_ARGS; j++) {
if (strcmp(argv[i], port_args[j].name))
continue;
port_args[j].set = 1;
if (!port_args[j].val) {
if (port_op >= 0)
IBEXIT("%s only one of: ",
"query, enable, disable, "
"reset, down, arm, active, "
"can be specified",
port_args[j].name);
port_op = j;
break;
}
if (++i >= argc)
IBEXIT("%s requires an additional parameter",
port_args[j].name);
val = strtoull(argv[i], 0, 0);
switch (j) {
case SPEED:
if (val > 15)
IBEXIT("invalid speed value %ld", val);
break;
case ESPEED:
if (val > 31)
IBEXIT("invalid extended speed value %ld", val);
break;
case FDR10SPEED:
if (val > 1)
IBEXIT("invalid fdr10 speed value %ld", val);
break;
case WIDTH:
if ((val > 31 && val != 255))
IBEXIT("invalid width value %ld", val);
break;
case VLS:
if (val == 0 || val > 5)
IBEXIT("invalid vls value %ld", val);
break;
case MTU:
if (val == 0 || val > 5)
IBEXIT("invalid mtu value %ld", val);
break;
case LID:
if (val == 0 || val >= 0xC000)
IBEXIT("invalid lid value 0x%lx", val);
break;
case SMLID:
if (val == 0 || val >= 0xC000)
IBEXIT("invalid smlid value 0x%lx",
val);
break;
case LMC:
if (val > 7)
IBEXIT("invalid lmc value %ld", val);
break;
case MKEY:
errno = 0;
val = strtoull(argv[i], &endp, 0);
if (errno || *endp != '\0') {
errno = 0;
val = strtoull(getpass("New M_Key: "),
&endp, 0);
if (errno || *endp != '\0') {
IBEXIT("Bad new M_Key\n");
}
}
/* All 64-bit values are legal */
break;
case MKEYLEASE:
if (val > 0xFFFF)
IBEXIT("invalid mkey lease time %ld", val);
break;
case MKEYPROT:
if (val > 3)
IBEXIT("invalid mkey protection bit setting %ld", val);
}
*port_args[j].val = val;
changed = 1;
break;
}
if (j == NPORT_ARGS)
IBEXIT("invalid operation: %s", argv[i]);
}
if (port_op < 0)
port_op = QUERY;
is_switch = get_node_info(&portid, data);
vendorid = (uint32_t) mad_get_field(data, 0, IB_NODE_VENDORID_F);
devid = (uint16_t) mad_get_field(data, 0, IB_NODE_DEVID_F);
if ((port_args[MKEY].set || port_args[MKEYLEASE].set ||
port_args[MKEYPROT].set) && is_switch && portnum != 0)
IBEXIT("Can't set M_Key fields on switch port != 0");
if (port_op != QUERY || changed)
printf("Initial %s PortInfo:\n", is_switch ? "Switch" : "CA/RT");
else
printf("%s PortInfo:\n", is_switch ? "Switch" : "CA/RT");
espeed_cap = get_port_info(&portid, data, portnum, is_switch);
show_port_info(&portid, data, portnum, espeed_cap, is_switch);
if (is_mlnx_ext_port_info_supported(vendorid, devid)) {
get_mlnx_ext_port_info(&portid, data2, portnum);
show_mlnx_ext_port_info(&portid, data2, portnum);
}
if (port_op != QUERY || changed) {
/*
* If we aren't setting the LID and the LID is the default,
* the SMA command will fail due to an invalid LID.
* Set it to something unlikely but valid.
*/
physstate = mad_get_field(data, 0, IB_PORT_PHYS_STATE_F);
val = mad_get_field(data, 0, IB_PORT_LID_F);
if (!port_args[LID].set && (!val || val == 0xFFFF))
mad_set_field(data, 0, IB_PORT_LID_F, 0x1234);
val = mad_get_field(data, 0, IB_PORT_SMLID_F);
if (!port_args[SMLID].set && (!val || val == 0xFFFF))
mad_set_field(data, 0, IB_PORT_SMLID_F, 0x1234);
mad_set_field(data, 0, IB_PORT_STATE_F, 0); /* NOP */
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 0); /* NOP */
switch (port_op) {
case ON:
/* Enable only if state is Disable */
if(physstate != 3) {
printf("Port is already in enable state\n");
goto close_port;
}
case ENABLE:
case RESET:
/* Polling */
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 2);
break;
case OFF:
case DISABLE:
printf("Disable may be irreversible\n");
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 3);
break;
case DOWN:
mad_set_field(data, 0, IB_PORT_STATE_F, 1);
break;
case ARM:
mad_set_field(data, 0, IB_PORT_STATE_F, 3);
break;
case ACTIVE:
mad_set_field(data, 0, IB_PORT_STATE_F, 4);
break;
}
/* always set enabled speeds/width - defaults to NOP */
mad_set_field(data, 0, IB_PORT_LINK_SPEED_ENABLED_F, speed);
mad_set_field(data, 0, IB_PORT_LINK_SPEED_EXT_ENABLED_F, espeed);
mad_set_field(data, 0, IB_PORT_LINK_WIDTH_ENABLED_F, width);
if (port_args[VLS].set)
mad_set_field(data, 0, IB_PORT_OPER_VLS_F, vls);
if (port_args[MTU].set)
mad_set_field(data, 0, IB_PORT_NEIGHBOR_MTU_F, mtu);
if (port_args[LID].set)
mad_set_field(data, 0, IB_PORT_LID_F, lid);
if (port_args[SMLID].set)
mad_set_field(data, 0, IB_PORT_SMLID_F, smlid);
if (port_args[LMC].set)
mad_set_field(data, 0, IB_PORT_LMC_F, lmc);
if (port_args[FDR10SPEED].set) {
mad_set_field(data2, 0,
IB_MLNX_EXT_PORT_STATE_CHG_ENABLE_F,
FDR10);
mad_set_field(data2, 0,
IB_MLNX_EXT_PORT_LINK_SPEED_ENABLED_F,
fdr10);
set_mlnx_ext_port_info(&portid, data2, portnum);
}
if (port_args[MKEY].set)
mad_set_field64(data, 0, IB_PORT_MKEY_F, mkey);
if (port_args[MKEYLEASE].set)
mad_set_field(data, 0, IB_PORT_MKEY_LEASE_F,
mkeylease);
if (port_args[MKEYPROT].set)
mad_set_field(data, 0, IB_PORT_MKEY_PROT_BITS_F,
mkeyprot);
set_port_info(&portid, data, portnum, espeed_cap, is_switch);
} else if (is_switch && portnum) {
/* Now, make sure PortState is Active */
/* Or is PortPhysicalState LinkUp sufficient ? */
mad_decode_field(data, IB_PORT_STATE_F, &state);
mad_decode_field(data, IB_PORT_PHYS_STATE_F, &physstate);
if (state == 4) { /* Active */
mad_decode_field(data, IB_PORT_LINK_WIDTH_ENABLED_F,
&lwe);
mad_decode_field(data, IB_PORT_LINK_WIDTH_SUPPORTED_F,
&lws);
mad_decode_field(data, IB_PORT_LINK_WIDTH_ACTIVE_F,
&lwa);
mad_decode_field(data, IB_PORT_LINK_SPEED_SUPPORTED_F,
&lss);
mad_decode_field(data, IB_PORT_LINK_SPEED_ACTIVE_F,
&lsa);
mad_decode_field(data, IB_PORT_LINK_SPEED_ENABLED_F,
&lse);
mad_decode_field(data2,
IB_MLNX_EXT_PORT_LINK_SPEED_SUPPORTED_F,
&fdr10s);
mad_decode_field(data2,
IB_MLNX_EXT_PORT_LINK_SPEED_ENABLED_F,
&fdr10e);
mad_decode_field(data2,
IB_MLNX_EXT_PORT_LINK_SPEED_ACTIVE_F,
&fdr10a);
if (espeed_cap) {
mad_decode_field(data,
IB_PORT_LINK_SPEED_EXT_SUPPORTED_F,
&lses);
mad_decode_field(data,
IB_PORT_LINK_SPEED_EXT_ACTIVE_F,
&lsea);
mad_decode_field(data,
IB_PORT_LINK_SPEED_EXT_ENABLED_F,
&lsee);
}
/* Setup portid for peer port */
memcpy(&peerportid, &portid, sizeof(peerportid));
if (portid.lid == 0) {
peerportid.drpath.cnt++;
if (peerportid.drpath.cnt == IB_SUBNET_PATH_HOPS_MAX) {
IBEXIT("Too many hops");
}
} else {
peerportid.drpath.cnt = 1;
/* Set DrSLID to local lid */
if (resolve_self(ibd_ca, ibd_ca_port, &selfportid,
&selfport, 0) < 0)
IBEXIT("could not resolve self");
peerportid.drpath.drslid = (uint16_t) selfportid.lid;
peerportid.drpath.drdlid = 0xffff;
}
peerportid.drpath.p[peerportid.drpath.cnt] = (uint8_t) portnum;
/* Get peer port NodeInfo to obtain peer port number */
is_peer_switch = get_node_info(&peerportid, data);
rem_vendorid = (uint32_t) mad_get_field(data, 0, IB_NODE_VENDORID_F);
rem_devid = (uint16_t) mad_get_field(data, 0, IB_NODE_DEVID_F);
mad_decode_field(data, IB_NODE_LOCAL_PORT_F,
&peerlocalportnum);
printf("Peer PortInfo:\n");
/* Get peer port characteristics */
peer_espeed_cap = get_port_info(&peerportid, data,
peerlocalportnum,
is_peer_switch);
if (is_mlnx_ext_port_info_supported(rem_vendorid, rem_devid))
get_mlnx_ext_port_info(&peerportid, data2,
peerlocalportnum);
show_port_info(&peerportid, data, peerlocalportnum,
peer_espeed_cap, is_peer_switch);
if (is_mlnx_ext_port_info_supported(rem_vendorid, rem_devid))
show_mlnx_ext_port_info(&peerportid, data2,
peerlocalportnum);
mad_decode_field(data, IB_PORT_LINK_WIDTH_ENABLED_F,
&peerlwe);
mad_decode_field(data, IB_PORT_LINK_WIDTH_SUPPORTED_F,
&peerlws);
mad_decode_field(data, IB_PORT_LINK_WIDTH_ACTIVE_F,
&peerlwa);
mad_decode_field(data, IB_PORT_LINK_SPEED_SUPPORTED_F,
&peerlss);
mad_decode_field(data, IB_PORT_LINK_SPEED_ACTIVE_F,
&peerlsa);
mad_decode_field(data, IB_PORT_LINK_SPEED_ENABLED_F,
&peerlse);
mad_decode_field(data2,
IB_MLNX_EXT_PORT_LINK_SPEED_SUPPORTED_F,
&peerfdr10s);
mad_decode_field(data2,
IB_MLNX_EXT_PORT_LINK_SPEED_ENABLED_F,
&peerfdr10e);
mad_decode_field(data2,
IB_MLNX_EXT_PORT_LINK_SPEED_ACTIVE_F,
&peerfdr10a);
if (peer_espeed_cap) {
mad_decode_field(data,
IB_PORT_LINK_SPEED_EXT_SUPPORTED_F,
&peerlses);
mad_decode_field(data,
IB_PORT_LINK_SPEED_EXT_ACTIVE_F,
&peerlsea);
mad_decode_field(data,
IB_PORT_LINK_SPEED_EXT_ENABLED_F,
&peerlsee);
}
/* Now validate peer port characteristics */
/* Examine Link Width */
width = get_link_width(lwe, lws);
peerwidth = get_link_width(peerlwe, peerlws);
validate_width(width, peerwidth, lwa);
/* Examine Link Speeds */
speed = get_link_speed(lse, lss);
peerspeed = get_link_speed(peerlse, peerlss);
validate_speed(speed, peerspeed, lsa);
if (espeed_cap && peer_espeed_cap) {
espeed = get_link_speed_ext(lsee, lses);
peerespeed = get_link_speed_ext(peerlsee,
peerlses);
validate_extended_speed(espeed, peerespeed,
lsea);
} else {
if (fdr10e & FDR10 && peerfdr10e & FDR10) {
if (!(fdr10a & FDR10))
IBWARN("Peer ports operating at active speed %d rather than FDR10", lsa);
}
}
}
}
close_port:
mad_rpc_close_port(srcport);
exit(0);
}
int
main(int argc, char **argv)
{
int mgmt_classes[3] = {IB_SMI_CLASS, IB_SMI_DIRECT_CLASS, IB_SA_CLASS};
ib_portid_t portid = {0};
ib_portid_t *sm_id = 0, sm_portid = {0};
extern int ibdebug;
int err;
int timeout = 0, udebug = 0;
char *ca = 0;
int ca_port = 0;
int port_op = 0; /* default to query */
int speed = 15;
int is_switch = 1;
int state, physstate, lwe, lws, lwa, lse, lss, lsa;
int peerlocalportnum, peerlwe, peerlws, peerlwa, peerlse, peerlss, peerlsa;
int width, peerwidth, peerspeed;
uint8_t data[IB_SMP_DATA_SIZE];
ib_portid_t peerportid = {0};
int portnum = 0;
ib_portid_t selfportid = {0};
int selfport = 0;
static char const str_opts[] = "C:P:t:s:devDGVhu";
static const struct option long_opts[] = {
{ "C", 1, 0, 'C'},
{ "P", 1, 0, 'P'},
{ "debug", 0, 0, 'd'},
{ "err_show", 0, 0, 'e'},
{ "verbose", 0, 0, 'v'},
{ "Direct", 0, 0, 'D'},
{ "Guid", 0, 0, 'G'},
{ "timeout", 1, 0, 't'},
{ "s", 1, 0, 's'},
{ "Version", 0, 0, 'V'},
{ "help", 0, 0, 'h'},
{ "usage", 0, 0, 'u'},
{ }
};
argv0 = argv[0];
while (1) {
int ch = getopt_long(argc, argv, str_opts, long_opts, NULL);
if ( ch == -1 )
break;
switch(ch) {
case 'd':
ibdebug++;
madrpc_show_errors(1);
umad_debug(udebug);
udebug++;
break;
case 'e':
madrpc_show_errors(1);
break;
case 'D':
dest_type = IB_DEST_DRPATH;
break;
case 'G':
dest_type = IB_DEST_GUID;
break;
case 'C':
ca = optarg;
break;
case 'P':
ca_port = strtoul(optarg, 0, 0);
break;
case 's':
if (ib_resolve_portid_str(&sm_portid, optarg, IB_DEST_LID, 0) < 0)
IBERROR("can't resolve SM destination port %s", optarg);
sm_id = &sm_portid;
break;
case 't':
timeout = strtoul(optarg, 0, 0);
madrpc_set_timeout(timeout);
break;
case 'v':
verbose++;
break;
case 'V':
fprintf(stderr, "%s %s\n", argv0, get_build_version() );
exit(-1);
default:
usage();
break;
}
}
argc -= optind;
argv += optind;
if (argc < 2)
usage();
madrpc_init(ca, ca_port, mgmt_classes, 3);
if (ib_resolve_portid_str(&portid, argv[0], dest_type, sm_id) < 0)
IBERROR("can't resolve destination port %s", argv[0]);
/* First, make sure it is a switch port if it is a "set" */
if (argc >= 3) {
if (!strcmp(argv[2], "enable"))
port_op = 1;
else if (!strcmp(argv[2], "disable"))
port_op = 2;
else if (!strcmp(argv[2], "reset"))
port_op = 3;
else if (!strcmp(argv[2], "speed")) {
if (argc < 4)
IBERROR("speed requires an additional parameter");
port_op = 4;
/* Parse speed value */
speed = strtoul(argv[3], 0, 0);
if (speed > 15)
IBERROR("invalid speed value %d", speed);
}
}
err = get_node_info(&portid, data);
if (err < 0)
IBERROR("smp query nodeinfo failed");
if (err) { /* not switch */
if (port_op == 0) /* query op */
is_switch = 0;
else if (port_op != 4) /* other than speed op */
IBERROR("smp query nodeinfo: Node type not switch");
}
if (argc-1 > 0)
portnum = strtol(argv[1], 0, 0);
if (port_op)
printf("Initial PortInfo:\n");
else
printf("PortInfo:\n");
err = get_port_info(&portid, data, portnum, port_op);
if (err < 0)
IBERROR("smp query portinfo failed");
/* Only if one of the "set" options is chosen */
if (port_op) {
if (port_op == 1) /* Enable port */
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 2); /* Polling */
else if ((port_op == 2) || (port_op == 3)) { /* Disable port */
mad_set_field(data, 0, IB_PORT_STATE_F, 1); /* Down */
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 3); /* Disabled */
} else if (port_op == 4) { /* Set speed */
mad_set_field(data, 0, IB_PORT_LINK_SPEED_ENABLED_F, speed);
mad_set_field(data, 0, IB_PORT_STATE_F, 0);
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 0);
}
err = set_port_info(&portid, data, portnum, port_op);
if (err < 0)
IBERROR("smp set portinfo failed");
if (port_op == 3) { /* Reset port - so also enable */
mad_set_field(data, 0, IB_PORT_PHYS_STATE_F, 2); /* Polling */
err = set_port_info(&portid, data, portnum, port_op);
if (err < 0)
IBERROR("smp set portinfo failed");
}
} else { /* query op */
/* only compare peer port if switch port */
if (is_switch) {
/* First, exclude SP0 */
if (portnum) {
/* Now, make sure PortState is Active */
/* Or is PortPhysicalState LinkUp sufficient ? */
mad_decode_field(data, IB_PORT_STATE_F, &state);
mad_decode_field(data, IB_PORT_PHYS_STATE_F, &physstate);
if (state == 4) { /* Active */
mad_decode_field(data, IB_PORT_LINK_WIDTH_ENABLED_F, &lwe );
mad_decode_field(data, IB_PORT_LINK_WIDTH_SUPPORTED_F, &lws);
mad_decode_field(data, IB_PORT_LINK_WIDTH_ACTIVE_F, &lwa);
mad_decode_field(data, IB_PORT_LINK_SPEED_SUPPORTED_F, &lss);
mad_decode_field(data, IB_PORT_LINK_SPEED_ACTIVE_F, &lsa);
mad_decode_field(data, IB_PORT_LINK_SPEED_ENABLED_F, &lse);
/* Setup portid for peer port */
memcpy(&peerportid, &portid, sizeof(peerportid));
peerportid.drpath.cnt = 1;
peerportid.drpath.p[1] = portnum;
/* Set DrSLID to local lid */
if (ib_resolve_self(&selfportid, &selfport, 0) < 0)
IBERROR("could not resolve self");
peerportid.drpath.drslid = selfportid.lid;
peerportid.drpath.drdlid = 0xffff;
/* Get peer port NodeInfo to obtain peer port number */
err = get_node_info(&peerportid, data);
if (err < 0)
IBERROR("smp query nodeinfo failed");
mad_decode_field(data, IB_NODE_LOCAL_PORT_F, &peerlocalportnum);
printf("Peer PortInfo:\n");
/* Get peer port characteristics */
err = get_port_info(&peerportid, data, peerlocalportnum, port_op);
if (err < 0)
IBERROR("smp query peer portinfofailed");
mad_decode_field(data, IB_PORT_LINK_WIDTH_ENABLED_F, &peerlwe );
mad_decode_field(data, IB_PORT_LINK_WIDTH_SUPPORTED_F, &peerlws);
mad_decode_field(data, IB_PORT_LINK_WIDTH_ACTIVE_F, &peerlwa);
mad_decode_field(data, IB_PORT_LINK_SPEED_SUPPORTED_F, &peerlss);
mad_decode_field(data, IB_PORT_LINK_SPEED_ACTIVE_F, &peerlsa);
mad_decode_field(data, IB_PORT_LINK_SPEED_ENABLED_F, &peerlse);
/* Now validate peer port characteristics */
/* Examine Link Width */
width = get_link_width(lwe, lws);
peerwidth = get_link_width(peerlwe, peerlws);
validate_width(width, peerwidth, lwa);
/* Examine Link Speed */
speed = get_link_speed(lse, lss);
peerspeed = get_link_speed(peerlse, peerlss);
validate_speed(speed, peerspeed, lsa);
}
}
}
}
exit(0);
}