static void __init uart_debug_init(void)
{
int debug_port_id;
struct platform_device *debug_uart;
debug_port_id = get_tegra_uart_debug_port_id();
if (debug_port_id < 0) {
debug_port_id = 3;
} else if (debug_port_id >= ARRAY_SIZE(debug_uarts)) {
pr_info("The debug console id %d is invalid, Assuming UARTA",
debug_port_id);
debug_port_id = 0;
}
pr_info("Selecting %s as the debug port\n",
uart_names[debug_port_id]);
debug_uart_clk = clk_get_sys("serial8250.0",
uart_names[debug_port_id]);
debug_uart = debug_uarts[debug_port_id];
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uart->dev.platform_data))->mapbase;
debug_uart_port_irq = ((struct plat_serial8250_port *)(
debug_uart->dev.platform_data))->irq;
return;
}
int __init tegranote7c_pinmux_init(void)
{
tegranote7c_gpio_init_configure();
tegra_drive_pinmux_config_table(tegranote7c_drive_pinmux,
ARRAY_SIZE(tegranote7c_drive_pinmux));
tegra_pinmux_config_table(tegranote7c_pinmux_common,
ARRAY_SIZE(tegranote7c_pinmux_common));
tegra_pinmux_config_table(tegranote7c_unused_pins_lowpower,
ARRAY_SIZE(tegranote7c_unused_pins_lowpower));
tegra_pinmux_config_table(manual_config_pinmux,
ARRAY_SIZE(manual_config_pinmux));
if (get_tegra_uart_debug_port_id() == UART_FROM_SDCARD)
tegra_pinmux_config_table(e2542_uart_config_pinmux,
ARRAY_SIZE(e2542_uart_config_pinmux));
#ifdef CONFIG_PM_SLEEP
tegra11x_set_sleep_pinmux(tegranote7c_sleep_pinmux,
ARRAY_SIZE(tegranote7c_sleep_pinmux));
tegra11x_set_sleep_gpio(tegranote7c_sleep_gpio,
ARRAY_SIZE(tegranote7c_sleep_gpio));
#endif
return 0;
}
static void __init uart_debug_init(void)
{
int debug_port_id;
debug_port_id = get_tegra_uart_debug_port_id();
if (debug_port_id < 0)
debug_port_id = 3;
switch (debug_port_id) {
case 0:
/* UARTA is the debug port. */
pr_info("Selecting UARTA as the debug console\n");
kai_uart_devices[0] = &debug_uarta_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarta_device.dev.platform_data))->mapbase;
break;
case 1:
/* UARTB is the debug port. */
pr_info("Selecting UARTB as the debug console\n");
kai_uart_devices[1] = &debug_uartb_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uartb");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartb_device.dev.platform_data))->mapbase;
break;
case 2:
/* UARTC is the debug port. */
pr_info("Selecting UARTC as the debug console\n");
kai_uart_devices[2] = &debug_uartc_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uartc");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartc_device.dev.platform_data))->mapbase;
break;
case 3:
/* UARTD is the debug port. */
pr_info("Selecting UARTD as the debug console\n");
kai_uart_devices[3] = &debug_uartd_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uartd");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartd_device.dev.platform_data))->mapbase;
break;
case 4:
/* UARTE is the debug port. */
pr_info("Selecting UARTE as the debug console\n");
kai_uart_devices[4] = &debug_uarte_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uarte");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarte_device.dev.platform_data))->mapbase;
break;
default:
pr_info("The debug console id %d is invalid, Assuming UARTA",
debug_port_id);
kai_uart_devices[0] = &debug_uarta_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarta_device.dev.platform_data))->mapbase;
break;
}
return;
}
int uart_console_debug_init(int default_debug_port)
{
int debug_port_id;
debug_port_id = get_tegra_uart_debug_port_id();
if (debug_port_id < 0)
debug_port_id = default_debug_port;
if (debug_port_id < 0) {
pr_warn("No debug console channel\n");
return -EINVAL;
}
switch (debug_port_id) {
case 0:
/* UARTA is the debug port. */
pr_info("Selecting UARTA as the debug console\n");
debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarta_device.dev.platform_data))->mapbase;
uart_console_debug_device = &debug_uarta_device;
break;
case 1:
/* UARTB is the debug port. */
pr_info("Selecting UARTB as the debug console\n");
debug_uart_clk = clk_get_sys("serial8250.0", "uartb");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartb_device.dev.platform_data))->mapbase;
uart_console_debug_device = &debug_uartb_device;
break;
case 2:
/* UARTC is the debug port. */
pr_info("Selecting UARTC as the debug console\n");
debug_uart_clk = clk_get_sys("serial8250.0", "uartc");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartc_device.dev.platform_data))->mapbase;
uart_console_debug_device = &debug_uartc_device;
break;
case 3:
/* UARTD is the debug port. */
pr_info("Selecting UARTD as the debug console\n");
debug_uart_clk = clk_get_sys("serial8250.0", "uartd");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartd_device.dev.platform_data))->mapbase;
uart_console_debug_device = &debug_uartd_device;
break;
#if !defined(CONFIG_ARCH_TEGRA_2x_SOC)
case 4:
/* UARTE is the debug port. */
pr_info("Selecting UARTE as the debug console\n");
debug_uart_clk = clk_get_sys("serial8250.0", "uarte");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarte_device.dev.platform_data))->mapbase;
uart_console_debug_device = &debug_uarte_device;
break;
#endif
default:
pr_info("The debug console id %d is invalid, Assuming UARTA", debug_port_id);
debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarta_device.dev.platform_data))->mapbase;
uart_console_debug_device = &debug_uarta_device;
break;
}
if (!IS_ERR_OR_NULL(debug_uart_clk)) {
struct clk *c;
pr_info("The debug console clock name is %s\n",
debug_uart_clk->name);
c = tegra_get_clock_by_name("pll_p");
if (IS_ERR_OR_NULL(c))
pr_err("Not getting the parent clock pll_p\n");
else
clk_set_parent(debug_uart_clk, c);
tegra_clk_prepare_enable(debug_uart_clk);
clk_set_rate(debug_uart_clk, clk_get_rate(c));
} else {
pr_err("Not getting the clock for debug consolei %d\n",
debug_port_id);
}
return debug_port_id;
}
static void __init uart_debug_init(void)
{
struct board_info board_info;
int debug_port_id;
tegra_get_board_info(&board_info);
debug_port_id = get_tegra_uart_debug_port_id();
if (debug_port_id < 0) {
debug_port_id = 0;
/* UARTB is debug port
* for SLT - E1186/E1187/PM269
* for E1256/E1257
*/
if (((board_info.sku & SKU_SLT_ULPI_SUPPORT) &&
((board_info.board_id == BOARD_E1186) ||
(board_info.board_id == BOARD_E1187) ||
(board_info.board_id == BOARD_PM269))) ||
(board_info.board_id == BOARD_E1256) ||
(board_info.board_id == BOARD_E1257))
debug_port_id = 1;
}
#ifdef CONFIG_TEGRA_IRDA
if ((board_info.board_id == BOARD_E1186) ||
(board_info.board_id == BOARD_E1198)) {
if (debug_port_id == 1) {
cardhu_irda_pdata.is_irda = false;
pr_err("UARTB is not available for IrDA\n");
}
}
#endif
switch (debug_port_id) {
case 0:
/* UARTA is the debug port. */
pr_info("Selecting UARTA as the debug console\n");
cardhu_uart_devices[0] = &debug_uarta_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarta_device.dev.platform_data))->mapbase;
break;
case 1:
/* UARTB is the debug port. */
pr_info("Selecting UARTB as the debug console\n");
cardhu_uart_devices[1] = &debug_uartb_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uartb");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartb_device.dev.platform_data))->mapbase;
break;
case 2:
/* UARTC is the debug port. */
pr_info("Selecting UARTC as the debug console\n");
cardhu_uart_devices[2] = &debug_uartc_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uartc");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartc_device.dev.platform_data))->mapbase;
break;
case 3:
/* UARTD is the debug port. */
pr_info("Selecting UARTD as the debug console\n");
cardhu_uart_devices[3] = &debug_uartd_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uartd");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uartd_device.dev.platform_data))->mapbase;
break;
case 4:
/* UARTE is the debug port. */
pr_info("Selecting UARTE as the debug console\n");
cardhu_uart_devices[4] = &debug_uarte_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uarte");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarte_device.dev.platform_data))->mapbase;
break;
default:
pr_info("The debug console id %d is invalid, Assuming UARTA", debug_port_id);
cardhu_uart_devices[0] = &debug_uarta_device;
debug_uart_clk = clk_get_sys("serial8250.0", "uarta");
debug_uart_port_base = ((struct plat_serial8250_port *)(
debug_uarta_device.dev.platform_data))->mapbase;
break;
}
return;
}
