bool
MetricBackend_AMD_perfmon::testMetrics(std::vector<Metric_AMD_perfmon>* metrics) {
unsigned monitor;
unsigned id;
glGenPerfMonitorsAMD(1, &monitor);
for (Metric_AMD_perfmon &c : *metrics) {
id = c.id();
glSelectPerfMonitorCountersAMD(monitor, 1, c.groupId(), 1, &id);
}
glGetError();
glBeginPerfMonitorAMD(monitor);
GLenum err = glGetError();
glEndPerfMonitorAMD(monitor);
glDeletePerfMonitorsAMD(1, &monitor);
if (err == GL_INVALID_OPERATION) {
return 0;
}
return 1;
}
void MetricBackend_AMD_perfmon::beginPass() {
if (!numPasses) return;
/* First process per-frame passes, then per-call passes */
if (curPass < numFramePasses) {
perFrame = true;
} else {
perFrame = false;
}
/* Generate monitor */
glGenPerfMonitorsAMD(NUM_MONITORS, monitors);
for (Metric_AMD_perfmon &c : passes[curPass]) {
unsigned id = c.id();
for (auto & monitor : monitors) {
glSelectPerfMonitorCountersAMD(monitor, 1, c.groupId(), 1, &id);
}
}
curMonitor = 0;
firstRound = true;
curEvent = 0;
supported = true; // can change if context is switched, so revert back
}
int MetricBackend_AMD_perfmon::enableMetric(Metric* metric_, QueryBoundary pollingRule) {
unsigned id = metric_->id();
unsigned gid = metric_->groupId();
unsigned monitor;
// profiling only draw calls
if (pollingRule == QUERY_BOUNDARY_CALL) return 1;
// check that Metric is valid metric
glGenPerfMonitorsAMD(1, &monitor);
glGetError();
glSelectPerfMonitorCountersAMD(monitor, 1, gid, 1, &id);
GLenum err = glGetError();
glDeletePerfMonitorsAMD(1, &monitor);
if (err == GL_INVALID_VALUE) {
return 1;
}
Metric_AMD_perfmon metric(gid, id);
metric.numType(); // triggers metric vars precache (in case context changes)
metrics[pollingRule].push_back(metric);
return 0;
}
/**
* Make sure that calling SelectPerfMonitorCountersAMD on an active monitor
* is possible, resets active queries, and restarts monitoring (so it remains
* active).
*
* This is not actually specified, but matches the behavior of AMD's driver.
* Being an AMD extension, other implementations should probably match theirs.
*/
static void
test_change_counters_while_active(unsigned group)
{
unsigned monitor;
unsigned *counters;
int num_counters;
int max_active_counters;
unsigned usable_counters;
unsigned data;
const char *test_name = "change counters while active";
get_counters(group, &counters, &num_counters,
&max_active_counters);
verify(max_active_counters >= 0);
verify(piglit_check_gl_error(GL_NO_ERROR));
usable_counters = MIN2(num_counters, max_active_counters);
if (usable_counters == 0)
return; /* skip */
glGenPerfMonitorsAMD(1, &monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Enable counters 0 .. usable_counters from the list. */
glSelectPerfMonitorCountersAMD(monitor, true, group, usable_counters,
counters);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Start monitoring */
glBeginPerfMonitorAMD(monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Turn off the first counter. The specification is unclear whether
* or not this should be allowed while monitoring is active, but it
* apparently is (Catalyst 12.06 on a Radeon 3650).
*/
glSelectPerfMonitorCountersAMD(monitor, false, group, 1, counters);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Verify that all queries have been reset to 0 */
data = 0xd0d0d0d0;
glGetPerfMonitorCounterDataAMD(monitor, GL_PERFMON_RESULT_AVAILABLE_AMD,
sizeof(unsigned), &data, NULL);
verify(piglit_check_gl_error(GL_NO_ERROR));
verify(data == 0);
data = 0xd0d0d0d0;
glGetPerfMonitorCounterDataAMD(monitor, GL_PERFMON_RESULT_SIZE_AMD,
sizeof(unsigned), &data, NULL);
verify(piglit_check_gl_error(GL_NO_ERROR));
verify(data == 0);
/* The spec doesn't explicitly mention whether or not monitoring
* is still active, but apparently it is.
*/
glEndPerfMonitorAMD(monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
glDeletePerfMonitorsAMD(1, &monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
piglit_report_subtest_result(PIGLIT_PASS, "%s", test_name);
}
/**
* Basic functional test: enable all the counters in the first group
* (up to the maximum that can be active at a time), begin monitoring,
* end monitoring, make sure results are available, sanity check the
* result size, and get the results.
*/
static void
test_basic_measurement(unsigned group)
{
unsigned monitor;
unsigned *counters;
int num_counters;
int max_active_counters;
unsigned usable_counters;
unsigned result_size = 0;
GLsizei bytes_written = 0;
unsigned *data;
uint32_t *p;
unsigned value;
const char *test_name;
/**
* Test #1: Basic Measurement.
*
* Enable all the counters in the first group (up to the maximum that
* can be active at a time), begin monitoring, end monitoring, make
* sure results are available, sanity check the result size, and get
* the results.
*/
test_name = "basic measurement";
get_counters(group, &counters, &num_counters,
&max_active_counters);
verify(max_active_counters >= 0);
verify(piglit_check_gl_error(GL_NO_ERROR));
usable_counters = MIN2(num_counters, max_active_counters);
glGenPerfMonitorsAMD(1, &monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Enable counters 0 .. usable_counters from the list. */
glSelectPerfMonitorCountersAMD(monitor, true, group, usable_counters,
counters);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Start monitoring */
glBeginPerfMonitorAMD(monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Drawing...meh */
glFinish();
/* End monitoring */
glEndPerfMonitorAMD(monitor);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Wait for the result to be available. */
verify(wait_until_available(monitor));
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Get the result size. */
glGetPerfMonitorCounterDataAMD(monitor, GL_PERFMON_RESULT_SIZE_AMD,
sizeof(unsigned), &result_size, NULL);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Make sure the size is in bytes. */
verify(result_size % sizeof(unsigned) == 0);
/* The format is <Group ID, Group, Value>. The first two are
* uint32_ts. Value is either a float, uint32_t, or uint64_t.
* As a sanity check, make sure the result size is within
* reasonable limits. Don't bother checking the actual types
* since that's a bunch of work.
*/
verify(result_size >= 3 * sizeof(uint32_t) * usable_counters)
verify(result_size <=
(2 * sizeof(uint32_t) + sizeof(uint64_t)) * usable_counters);
/* Get the results. */
data = calloc(1, result_size);
glGetPerfMonitorCounterDataAMD(monitor, GL_PERFMON_RESULT_AMD,
result_size, data, &bytes_written);
verify(bytes_written == result_size);
piglit_report_subtest_result(PIGLIT_PASS, "%s", test_name);
/**
* Test #2: Verify counter results against specified range.
*/
test_name = "counters in range";
p = data;
while ((char *) p < ((char *) data) + bytes_written) {
uint32_t group_id = p[0];
uint32_t counter_id = p[1];
/* Counter values */
uint32_t u32 = p[2];
float f = ((float *) p)[2];
/* Query results */
GLenum counter_type = GL_NONE;
uint64_t range[2];
/* There's only one group, so it better match */
verify(group_id == group);
/* Getting the counter data also validates the counter ID
* without having to walk through the whole list of counters.
*/
glGetPerfMonitorCounterInfoAMD(group_id, counter_id,
GL_COUNTER_TYPE_AMD,
&counter_type);
verify(piglit_check_gl_error(GL_NO_ERROR));
glGetPerfMonitorCounterInfoAMD(group_id, counter_id,
GL_COUNTER_RANGE_AMD,
range);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Make sure it falls within the proper range */
switch (counter_type) {
case GL_UNSIGNED_INT: {
uint32_t min = ((uint32_t *) range)[0];
uint32_t max = ((uint32_t *) range)[1];
verify(u32 >= min);
verify(u32 <= max);
break;
}
case GL_UNSIGNED_INT64_AMD: {
uint64_t u64 = ((uint64_t *) p)[1];
verify(u64 >= range[0]);
verify(u64 <= range[1]);
break;
}
case GL_PERCENTAGE_AMD:
case GL_FLOAT: {
float min = ((float *) range)[0];
float max = ((float *) range)[1];
verify(f >= min);
verify(f <= max);
break;
}
}
p += (counter_type == GL_UNSIGNED_INT64_AMD) ? 4 : 3;
}
verify(result_size == ((char *) p - (char *) data));
free(data);
/**
* Test #3: Changing the set of active counters resets queries.
*
* "When SelectPerfMonitorCountersAMD is called on a monitor, any
* outstanding results for that monitor become invalidated and the
* result queries PERFMON_RESULT_SIZE_AMD and
* PERFMON_RESULT_AVAILABLE_AMD are reset to 0."
*/
test_name = "selecting counters resets queries";
/* Turn off the first counter. */
glSelectPerfMonitorCountersAMD(monitor, false, group, 1, counters);
verify(piglit_check_gl_error(GL_NO_ERROR));
/* Results should no longer be available. All queries should
* return 0.
*/
value = 0xd0d0d0d0;
glGetPerfMonitorCounterDataAMD(monitor, GL_PERFMON_RESULT_AVAILABLE_AMD,
sizeof(unsigned), &value, NULL);
verify(piglit_check_gl_error(GL_NO_ERROR));
verify(value == 0);
value = 0xd0d0d0d0;
glGetPerfMonitorCounterDataAMD(monitor, GL_PERFMON_RESULT_SIZE_AMD,
sizeof(unsigned), &value, NULL);
verify(piglit_check_gl_error(GL_NO_ERROR));
verify(value == 0);
piglit_report_subtest_result(PIGLIT_PASS, "%s", test_name);
glDeletePerfMonitorsAMD(1, &monitor);
}