static void __init eva_init(void)
{
struct platform_device *usb = NULL;
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers,
ARRAY_SIZE(fixed5v0_power_consumers), 5000000);
pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
r8a7740_pinmux_init();
r8a7740_meram_workaround();
/* LCDC0 */
gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* GETHER */
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
/* USB */
gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
if (gpio_get_value(159)) {
/* USB Host */
} else {
/* USB Func */
/*
* The USBHS interrupt handlers needs to read the IRQ pin value
* (HI/LOW) to diffentiate USB connection and disconnection
* events (usbhsf_get_vbus()). We thus need to select both the
* intc_irq7_1 pin group and GPIO 209 here.
*/
gpio_request_one(209, GPIOF_IN, NULL);
platform_device_register(&usbhsf_device);
usb = &usbhsf_device;
}
/* CON1/CON15 Camera */
gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */
gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
/* see mt9t111_power() */
gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */
/* FSI-WM8978 */
gpio_request(7, NULL);
gpio_request(8, NULL);
gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
/*
* CAUTION
*
* DBGMD/LCDC0/FSIA MUX
* DBGMD_SELECT_B should be set after setting PFC Function.
*/
gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL);
/*
* We can switch CON8/CON14 by SW1.5,
* but it needs after DBGMD_SELECT_B
*/
gpio_request_one(6, GPIOF_IN, NULL);
if (gpio_get_value(6)) {
/* CON14 enable */
} else {
/* CON8 (SDHI1) enable */
pinctrl_register_mappings(eva_sdhi1_pinctrl_map,
ARRAY_SIZE(eva_sdhi1_pinctrl_map));
platform_device_register(&vcc_sdhi1);
platform_device_register(&sdhi1_device);
}
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
r8a7740_add_standard_devices();
platform_add_devices(eva_devices,
ARRAY_SIZE(eva_devices));
rmobile_add_device_to_domain("A4LC", &lcdc0_device);
rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
if (usb)
rmobile_add_device_to_domain("A3SP", usb);
r8a7740_pm_init();
}
static void __init ap4evb_init(void)
{
struct pm_domain_device domain_devices[] = {
{ "A4LC", &lcdc1_device, },
{ "A4LC", &lcdc_device, },
{ "A4MP", &fsi_device, },
{ "A3SP", &sh_mmcif_device, },
{ "A3SP", &sdhi0_device, },
{ "A3SP", &sdhi1_device, },
{ "A4R", &ceu_device, },
};
u32 srcr4;
struct clk *clk;
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
sh7372_pinmux_init();
/* enable SCIFA0 */
gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
/* enable SMSC911X */
gpio_request(GPIO_FN_CS5A, NULL);
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* enable Debug switch (S6) */
gpio_request(GPIO_PORT32, NULL);
gpio_request(GPIO_PORT33, NULL);
gpio_request(GPIO_PORT34, NULL);
gpio_request(GPIO_PORT35, NULL);
gpio_direction_input(GPIO_PORT32);
gpio_direction_input(GPIO_PORT33);
gpio_direction_input(GPIO_PORT34);
gpio_direction_input(GPIO_PORT35);
gpio_export(GPIO_PORT32, 0);
gpio_export(GPIO_PORT33, 0);
gpio_export(GPIO_PORT34, 0);
gpio_export(GPIO_PORT35, 0);
/* SDHI0 */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
/* MMCIF */
gpio_request(GPIO_FN_MMCD0_0, NULL);
gpio_request(GPIO_FN_MMCD0_1, NULL);
gpio_request(GPIO_FN_MMCD0_2, NULL);
gpio_request(GPIO_FN_MMCD0_3, NULL);
gpio_request(GPIO_FN_MMCD0_4, NULL);
gpio_request(GPIO_FN_MMCD0_5, NULL);
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
gpio_request(GPIO_FN_MMCCLK0, NULL);
/* USB enable */
gpio_request(GPIO_FN_VBUS0_1, NULL);
gpio_request(GPIO_FN_IDIN_1_18, NULL);
gpio_request(GPIO_FN_PWEN_1_115, NULL);
gpio_request(GPIO_FN_OVCN_1_114, NULL);
gpio_request(GPIO_FN_EXTLP_1, NULL);
gpio_request(GPIO_FN_OVCN2_1, NULL);
/* setup USB phy */
__raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
gpio_request(GPIO_PORT161, NULL);
gpio_direction_output(GPIO_PORT161, 0); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
/* card detect pin for MMC slot (CN7) */
gpio_request(GPIO_PORT41, NULL);
gpio_direction_input(GPIO_PORT41);
/* setup FSI2 port B (HDMI) */
gpio_request(GPIO_FN_FSIBCK, NULL);
__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 119600000));
clk_put(clk);
}
/*
* set irq priority, to avoid sound chopping
* when NFS rootfs is used
* FSI(3) > SMSC911X(2)
*/
intc_set_priority(IRQ_FSI, 3);
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(1, i2c1_devices,
ARRAY_SIZE(i2c1_devices));
#ifdef CONFIG_AP4EVB_QHD
/*
* For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
* IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
*/
/* enable KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT4, NULL);
gpio_request(GPIO_FN_KEYIN0_136, NULL);
gpio_request(GPIO_FN_KEYIN1_135, NULL);
gpio_request(GPIO_FN_KEYIN2_134, NULL);
gpio_request(GPIO_FN_KEYIN3_133, NULL);
gpio_request(GPIO_FN_KEYIN4, NULL);
/* enable TouchScreen */
irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
tsc_device.irq = IRQ28;
i2c_register_board_info(1, &tsc_device, 1);
/* LCDC0 */
lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
lcdc_info.ch[0].interface_type = RGB24;
lcdc_info.ch[0].clock_divider = 1;
lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
lcdc_info.ch[0].panel_cfg.width = 44;
lcdc_info.ch[0].panel_cfg.height = 79;
platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
#else
/*
* For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
* IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
*/
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_PORT189, NULL); /* backlight */
gpio_direction_output(GPIO_PORT189, 1);
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
gpio_direction_output(GPIO_PORT151, 1);
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].clock_divider = 3;
lcdc_info.ch[0].flags = 0;
lcdc_info.ch[0].panel_cfg.width = 152;
lcdc_info.ch[0].panel_cfg.height = 91;
/* enable TouchScreen */
irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
tsc_device.irq = IRQ7;
i2c_register_board_info(0, &tsc_device, 1);
#endif /* CONFIG_AP4EVB_QHD */
/* CEU */
/*
* TODO: reserve memory for V4L2 DMA buffers, when a suitable API
* becomes available
*/
/* MIPI-CSI stuff */
gpio_request(GPIO_FN_VIO_CKO, NULL);
clk = clk_get(NULL, "vck1_clk");
if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 13000000));
clk_enable(clk);
clk_put(clk);
}
sh7372_add_standard_devices();
/* HDMI */
gpio_request(GPIO_FN_HDMI_HPD, NULL);
gpio_request(GPIO_FN_HDMI_CEC, NULL);
/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
#define SRCR4 IOMEM(0xe61580bc)
srcr4 = __raw_readl(SRCR4);
__raw_writel(srcr4 | (1 << 13), SRCR4);
udelay(50);
__raw_writel(srcr4 & ~(1 << 13), SRCR4);
platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
rmobile_add_devices_to_domains(domain_devices,
ARRAY_SIZE(domain_devices));
hdmi_init_pm_clock();
fsi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
pm_clk_add(&lcdc1_device.dev, "hdmi");
}
static void __init mackerel_init(void)
{
struct pm_domain_device domain_devices[] = {
{ "A4LC", &lcdc_device, },
{ "A4LC", &hdmi_lcdc_device, },
{ "A4LC", &meram_device, },
{ "A4MP", &fsi_device, },
{ "A3SP", &usbhs0_device, },
{ "A3SP", &usbhs1_device, },
{ "A3SP", &nand_flash_device, },
{ "A3SP", &sdhi0_device, },
#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
{ "A3SP", &sdhi1_device, },
#else
{ "A3SP", &sh_mmcif_device, },
#endif
{ "A3SP", &sdhi2_device, },
{ "A4R", &ceu_device, },
};
u32 srcr4;
struct clk *clk;
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
pinctrl_register_mappings(mackerel_pinctrl_map,
ARRAY_SIZE(mackerel_pinctrl_map));
sh7372_pinmux_init();
gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* FSI2 port A (ak4643) */
gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request(9, NULL);
gpio_request(10, NULL);
gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
/* FSI2 port B (HDMI) */
__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 119600000));
clk_put(clk);
}
/* Keypad */
irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
/* Touchscreen */
irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
/* Accelerometer */
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
srcr4 = __raw_readl(SRCR4);
__raw_writel(srcr4 | (1 << 13), SRCR4);
udelay(50);
__raw_writel(srcr4 & ~(1 << 13), SRCR4);
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(1, i2c1_devices,
ARRAY_SIZE(i2c1_devices));
sh7372_add_standard_devices();
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
rmobile_add_devices_to_domains(domain_devices,
ARRAY_SIZE(domain_devices));
hdmi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
}
static void __init mackerel_init(void)
{
struct pm_domain_device domain_devices[] = {
{ "A4LC", &lcdc_device, },
{ "A4LC", &hdmi_lcdc_device, },
{ "A4LC", &meram_device, },
{ "A4MP", &fsi_device, },
{ "A3SP", &usbhs0_device, },
{ "A3SP", &usbhs1_device, },
{ "A3SP", &nand_flash_device, },
{ "A3SP", &sh_mmcif_device, },
{ "A3SP", &sdhi0_device, },
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
{ "A3SP", &sdhi1_device, },
#endif
{ "A3SP", &sdhi2_device, },
{ "A4R", &ceu_device, },
};
u32 srcr4;
struct clk *clk;
regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
sh7372_pinmux_init();
/* enable SCIFA0 */
gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
/* enable SMSC911X */
gpio_request(GPIO_FN_CS5A, NULL);
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
gpio_request(GPIO_FN_LCDD21, NULL);
gpio_request(GPIO_FN_LCDD20, NULL);
gpio_request(GPIO_FN_LCDD19, NULL);
gpio_request(GPIO_FN_LCDD18, NULL);
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_PORT31, NULL); /* backlight */
gpio_direction_output(GPIO_PORT31, 0); /* off by default */
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
gpio_direction_output(GPIO_PORT151, 1);
/* USBHS0 */
gpio_request(GPIO_FN_VBUS0_0, NULL);
gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
/* USBHS1 */
gpio_request(GPIO_FN_VBUS0_1, NULL);
gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
gpio_request(GPIO_PORT161, NULL);
gpio_direction_output(GPIO_PORT161, 0); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
/* setup FSI2 port B (HDMI) */
gpio_request(GPIO_FN_FSIBCK, NULL);
__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 119600000));
clk_put(clk);
}
/* enable Keypad */
gpio_request(GPIO_FN_IRQ9_42, NULL);
irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
/* enable Touchscreen */
gpio_request(GPIO_FN_IRQ7_40, NULL);
irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
/* enable Accelerometer */
gpio_request(GPIO_FN_IRQ21, NULL);
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
/* enable SDHI0 */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* SDHI0 PORT172 card-detect IRQ26 */
gpio_request(GPIO_FN_IRQ26_172, NULL);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
#endif
/* card detect pin for MMC slot (CN7) */
gpio_request(GPIO_PORT41, NULL);
gpio_direction_input(GPIO_PORT41);
/* enable SDHI2 */
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHID2_2, NULL);
gpio_request(GPIO_FN_SDHID2_1, NULL);
gpio_request(GPIO_FN_SDHID2_0, NULL);
/* card detect pin for microSD slot (CN23) */
gpio_request(GPIO_PORT162, NULL);
gpio_direction_input(GPIO_PORT162);
/* MMCIF */
gpio_request(GPIO_FN_MMCD0_0, NULL);
gpio_request(GPIO_FN_MMCD0_1, NULL);
gpio_request(GPIO_FN_MMCD0_2, NULL);
gpio_request(GPIO_FN_MMCD0_3, NULL);
gpio_request(GPIO_FN_MMCD0_4, NULL);
gpio_request(GPIO_FN_MMCD0_5, NULL);
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
gpio_request(GPIO_FN_MMCCLK0, NULL);
/* FLCTL */
gpio_request(GPIO_FN_D0_NAF0, NULL);
gpio_request(GPIO_FN_D1_NAF1, NULL);
gpio_request(GPIO_FN_D2_NAF2, NULL);
gpio_request(GPIO_FN_D3_NAF3, NULL);
gpio_request(GPIO_FN_D4_NAF4, NULL);
gpio_request(GPIO_FN_D5_NAF5, NULL);
gpio_request(GPIO_FN_D6_NAF6, NULL);
gpio_request(GPIO_FN_D7_NAF7, NULL);
gpio_request(GPIO_FN_D8_NAF8, NULL);
gpio_request(GPIO_FN_D9_NAF9, NULL);
gpio_request(GPIO_FN_D10_NAF10, NULL);
gpio_request(GPIO_FN_D11_NAF11, NULL);
gpio_request(GPIO_FN_D12_NAF12, NULL);
gpio_request(GPIO_FN_D13_NAF13, NULL);
gpio_request(GPIO_FN_D14_NAF14, NULL);
gpio_request(GPIO_FN_D15_NAF15, NULL);
gpio_request(GPIO_FN_FCE0, NULL);
gpio_request(GPIO_FN_WE0_FWE, NULL);
gpio_request(GPIO_FN_FRB, NULL);
gpio_request(GPIO_FN_A4_FOE, NULL);
gpio_request(GPIO_FN_A5_FCDE, NULL);
gpio_request(GPIO_FN_RD_FSC, NULL);
/* enable GPS module (GT-720F) */
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
/* CEU */
gpio_request(GPIO_FN_VIO_CLK, NULL);
gpio_request(GPIO_FN_VIO_VD, NULL);
gpio_request(GPIO_FN_VIO_HD, NULL);
gpio_request(GPIO_FN_VIO_FIELD, NULL);
gpio_request(GPIO_FN_VIO_CKO, NULL);
gpio_request(GPIO_FN_VIO_D7, NULL);
gpio_request(GPIO_FN_VIO_D6, NULL);
gpio_request(GPIO_FN_VIO_D5, NULL);
gpio_request(GPIO_FN_VIO_D4, NULL);
gpio_request(GPIO_FN_VIO_D3, NULL);
gpio_request(GPIO_FN_VIO_D2, NULL);
gpio_request(GPIO_FN_VIO_D1, NULL);
gpio_request(GPIO_FN_VIO_D0, NULL);
/* HDMI */
gpio_request(GPIO_FN_HDMI_HPD, NULL);
gpio_request(GPIO_FN_HDMI_CEC, NULL);
/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
srcr4 = __raw_readl(SRCR4);
__raw_writel(srcr4 | (1 << 13), SRCR4);
udelay(50);
__raw_writel(srcr4 & ~(1 << 13), SRCR4);
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(1, i2c1_devices,
ARRAY_SIZE(i2c1_devices));
sh7372_add_standard_devices();
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
rmobile_add_devices_to_domains(domain_devices,
ARRAY_SIZE(domain_devices));
hdmi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
}
static void __init eva_init(void)
{
struct platform_device *usb = NULL;
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
r8a7740_pinmux_init();
r8a7740_meram_workaround();
/* SCIFA1 */
gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
/* LCDC0 */
gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
gpio_request(GPIO_FN_LCD0_D0, NULL);
gpio_request(GPIO_FN_LCD0_D1, NULL);
gpio_request(GPIO_FN_LCD0_D2, NULL);
gpio_request(GPIO_FN_LCD0_D3, NULL);
gpio_request(GPIO_FN_LCD0_D4, NULL);
gpio_request(GPIO_FN_LCD0_D5, NULL);
gpio_request(GPIO_FN_LCD0_D6, NULL);
gpio_request(GPIO_FN_LCD0_D7, NULL);
gpio_request(GPIO_FN_LCD0_D8, NULL);
gpio_request(GPIO_FN_LCD0_D9, NULL);
gpio_request(GPIO_FN_LCD0_D10, NULL);
gpio_request(GPIO_FN_LCD0_D11, NULL);
gpio_request(GPIO_FN_LCD0_D12, NULL);
gpio_request(GPIO_FN_LCD0_D13, NULL);
gpio_request(GPIO_FN_LCD0_D14, NULL);
gpio_request(GPIO_FN_LCD0_D15, NULL);
gpio_request(GPIO_FN_LCD0_D16, NULL);
gpio_request(GPIO_FN_LCD0_D17, NULL);
gpio_request(GPIO_FN_LCD0_D18_PORT40, NULL);
gpio_request(GPIO_FN_LCD0_D19_PORT4, NULL);
gpio_request(GPIO_FN_LCD0_D20_PORT3, NULL);
gpio_request(GPIO_FN_LCD0_D21_PORT2, NULL);
gpio_request(GPIO_FN_LCD0_D22_PORT0, NULL);
gpio_request(GPIO_FN_LCD0_D23_PORT1, NULL);
gpio_request(GPIO_FN_LCD0_DCK, NULL);
gpio_request(GPIO_FN_LCD0_VSYN, NULL);
gpio_request(GPIO_FN_LCD0_HSYN, NULL);
gpio_request(GPIO_FN_LCD0_DISP, NULL);
gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
/* Touchscreen */
gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */
gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
/* GETHER */
gpio_request(GPIO_FN_ET_CRS, NULL);
gpio_request(GPIO_FN_ET_MDC, NULL);
gpio_request(GPIO_FN_ET_MDIO, NULL);
gpio_request(GPIO_FN_ET_TX_ER, NULL);
gpio_request(GPIO_FN_ET_RX_ER, NULL);
gpio_request(GPIO_FN_ET_ERXD0, NULL);
gpio_request(GPIO_FN_ET_ERXD1, NULL);
gpio_request(GPIO_FN_ET_ERXD2, NULL);
gpio_request(GPIO_FN_ET_ERXD3, NULL);
gpio_request(GPIO_FN_ET_TX_CLK, NULL);
gpio_request(GPIO_FN_ET_TX_EN, NULL);
gpio_request(GPIO_FN_ET_ETXD0, NULL);
gpio_request(GPIO_FN_ET_ETXD1, NULL);
gpio_request(GPIO_FN_ET_ETXD2, NULL);
gpio_request(GPIO_FN_ET_ETXD3, NULL);
gpio_request(GPIO_FN_ET_PHY_INT, NULL);
gpio_request(GPIO_FN_ET_COL, NULL);
gpio_request(GPIO_FN_ET_RX_DV, NULL);
gpio_request(GPIO_FN_ET_RX_CLK, NULL);
gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
/* USB */
gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
if (gpio_get_value(GPIO_PORT159)) {
/* USB Host */
} else {
/* USB Func */
/*
* A1 chip has 2 IRQ7 pin and it was controled by MSEL register.
* OTOH, usbhs interrupt needs its value (HI/LOW) to decide
* USB connection/disconnection (usbhsf_get_vbus()).
* This means we needs to select GPIO_FN_IRQ7_PORT209 first,
* and select GPIO_PORT209 here
*/
gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL);
platform_device_register(&usbhsf_device);
usb = &usbhsf_device;
}
/* SDHI0 */
gpio_request(GPIO_FN_SDHI0_CMD, NULL);
gpio_request(GPIO_FN_SDHI0_CLK, NULL);
gpio_request(GPIO_FN_SDHI0_D0, NULL);
gpio_request(GPIO_FN_SDHI0_D1, NULL);
gpio_request(GPIO_FN_SDHI0_D2, NULL);
gpio_request(GPIO_FN_SDHI0_D3, NULL);
gpio_request(GPIO_FN_SDHI0_WP, NULL);
/*
* MMCIF
*
* Here doesn't care SW1.4 status,
* since CON2 is not mounted.
*/
gpio_request(GPIO_FN_MMC1_CLK_PORT103, NULL);
gpio_request(GPIO_FN_MMC1_CMD_PORT104, NULL);
gpio_request(GPIO_FN_MMC1_D0_PORT149, NULL);
gpio_request(GPIO_FN_MMC1_D1_PORT148, NULL);
gpio_request(GPIO_FN_MMC1_D2_PORT147, NULL);
gpio_request(GPIO_FN_MMC1_D3_PORT146, NULL);
gpio_request(GPIO_FN_MMC1_D4_PORT145, NULL);
gpio_request(GPIO_FN_MMC1_D5_PORT144, NULL);
gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL);
gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL);
/* CEU0 */
gpio_request(GPIO_FN_VIO0_D7, NULL);
gpio_request(GPIO_FN_VIO0_D6, NULL);
gpio_request(GPIO_FN_VIO0_D5, NULL);
gpio_request(GPIO_FN_VIO0_D4, NULL);
gpio_request(GPIO_FN_VIO0_D3, NULL);
gpio_request(GPIO_FN_VIO0_D2, NULL);
gpio_request(GPIO_FN_VIO0_D1, NULL);
gpio_request(GPIO_FN_VIO0_D0, NULL);
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
gpio_request(GPIO_FN_VIO0_VD, NULL);
gpio_request(GPIO_FN_VIO0_FIELD, NULL);
gpio_request(GPIO_FN_VIO_CKO, NULL);
/* CON1/CON15 Camera */
gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */
gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
/* see mt9t111_power() */
gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */
/* FSI-WM8978 */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAOMC, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL);
gpio_request(GPIO_PORT7, NULL);
gpio_request(GPIO_PORT8, NULL);
gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
/* FSI-HDMI */
gpio_request(GPIO_FN_FSIBCK, NULL);
/* HDMI */
gpio_request(GPIO_FN_HDMI_HPD, NULL);
gpio_request(GPIO_FN_HDMI_CEC, NULL);
/*
* CAUTION
*
* DBGMD/LCDC0/FSIA MUX
* DBGMD_SELECT_B should be set after setting PFC Function.
*/
gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL);
/*
* We can switch CON8/CON14 by SW1.5,
* but it needs after DBGMD_SELECT_B
*/
gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL);
if (gpio_get_value(GPIO_PORT6)) {
/* CON14 enable */
} else {
/* CON8 (SDHI1) enable */
gpio_request(GPIO_FN_SDHI1_CLK, NULL);
gpio_request(GPIO_FN_SDHI1_CMD, NULL);
gpio_request(GPIO_FN_SDHI1_D0, NULL);
gpio_request(GPIO_FN_SDHI1_D1, NULL);
gpio_request(GPIO_FN_SDHI1_D2, NULL);
gpio_request(GPIO_FN_SDHI1_D3, NULL);
gpio_request(GPIO_FN_SDHI1_CD, NULL);
gpio_request(GPIO_FN_SDHI1_WP, NULL);
/* SDSLOT2_PON */
gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL);
platform_device_register(&sdhi1_device);
}
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
r8a7740_add_standard_devices();
platform_add_devices(eva_devices,
ARRAY_SIZE(eva_devices));
rmobile_add_device_to_domain("A4LC", &lcdc0_device);
rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
if (usb)
rmobile_add_device_to_domain("A3SP", usb);
r8a7740_pm_init();
}