static int arizona_ldo1_remove(struct platform_device *pdev)
{
struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
if (ldo1->ena_gpiod)
gpiod_put(ldo1->ena_gpiod);
return 0;
}
/**
* phylink_destroy() - cleanup and destroy the phylink instance
* @pl: a pointer to a &struct phylink returned from phylink_create()
*
* Destroy a phylink instance. Any PHY that has been attached must have been
* cleaned up via phylink_disconnect_phy() prior to calling this function.
*/
void phylink_destroy(struct phylink *pl)
{
if (pl->sfp_bus)
sfp_unregister_upstream(pl->sfp_bus);
if (!IS_ERR_OR_NULL(pl->link_gpio))
gpiod_put(pl->link_gpio);
cancel_work_sync(&pl->resolve);
kfree(pl);
}
static void mmc_pwrseq_emmc_free(struct mmc_host *host)
{
struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,
struct mmc_pwrseq_emmc, pwrseq);
unregister_restart_handler(&pwrseq->reset_nb);
gpiod_put(pwrseq->reset_gpio);
kfree(pwrseq);
host->pwrseq = NULL;
}
static void free_gpio(struct pi433_device *device)
{
int i;
for (i = 0; i < NUM_DIO; i++) {
/* check if gpiod is valid */
if (IS_ERR(device->gpiod[i]))
continue;
free_irq(device->irq_num[i], device);
gpiod_put(device->gpiod[i]);
}
}
/*
* Get the Nth GPIO number from the ACPI object.
*/
static int soc_button_lookup_gpio(struct device *dev, int acpi_index)
{
struct gpio_desc *desc;
int gpio;
desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index, GPIOD_ASIS);
if (IS_ERR(desc))
return PTR_ERR(desc);
gpio = desc_to_gpio(desc);
gpiod_put(desc);
return gpio;
}
static int lm363x_regulator_probe(struct platform_device *pdev)
{
struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
struct regmap *regmap = lmu->regmap;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
struct device *dev = &pdev->dev;
int id = pdev->id;
struct gpio_desc *gpiod;
int ret;
cfg.dev = dev;
cfg.regmap = regmap;
/*
* LM3632 LDOs can be controlled by external pin.
* Register update is required if the pin is used.
*/
gpiod = lm363x_regulator_of_get_enable_gpio(dev, id);
if (gpiod) {
cfg.ena_gpiod = gpiod;
ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
if (gpiod)
gpiod_put(gpiod);
dev_err(dev, "External pin err: %d\n", ret);
return ret;
}
}
rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(dev, "[%d] regulator register err: %d\n", id, ret);
return ret;
}
return 0;
}
static int mt9m114_gpio_ctrl(struct v4l2_subdev *sd, int flag)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct device *dev = &client->dev;
int ret;
if (!camera_reset) {
camera_reset = gpiod_get_index(dev, "camera_0_reset", 0);
if (IS_ERR(camera_reset)) {
dev_err(dev,
"%s: gpiod_get_index(camera_0_reset) failed\n",
__func__);
ret = PTR_ERR(camera_reset);
goto err_camera_reset;
}
}
ret = gpiod_direction_output(camera_reset, 1);
if (ret) {
pr_err("%s: failed to set gpio direction\n", __func__);
gpiod_put(camera_reset);
goto err_camera_reset;
}
if (!camera_power_down) {
camera_power_down = gpiod_get_index(dev,
"camera_0_power_down", 1);
if (IS_ERR(camera_power_down)) {
pr_err("%s: gpiod_get_index(camera_power_down) failed\n",
__func__);
ret = PTR_ERR(camera_power_down);
goto err_power_down;
}
}
ret = gpiod_direction_output(camera_power_down, 0);
if (ret) {
pr_err("%s: failed to set gpio direction\n", __func__);
gpiod_put(camera_power_down);
goto err_power_down;
}
if (flag) {
gpiod_set_value(camera_reset, 0);
gpiod_set_value(camera_power_down, 1);
usleep_range(1000, 2000);
gpiod_set_value(camera_reset, 1);
} else {
gpiod_set_value(camera_power_down, 0);
gpiod_put(camera_power_down);
gpiod_set_value(camera_reset, 0);
gpiod_put(camera_reset);
camera_reset = NULL;
camera_power_down = NULL;
}
return 0;
err_camera_reset:
camera_reset = NULL;
return ret;
err_power_down:
camera_power_down = NULL;
return ret;
}
static int dwc3_pci_quirks(struct dwc3_pci *dwc)
{
struct platform_device *dwc3 = dwc->dwc3;
struct pci_dev *pdev = dwc->pci;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
struct property_entry properties[] = {
PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
/*
* FIXME these quirks should be removed when AMD NL
* tapes out
*/
PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ },
};
return platform_device_add_properties(dwc3, properties);
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
int ret;
struct property_entry properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ }
};
ret = platform_device_add_properties(dwc3, properties);
if (ret < 0)
return ret;
if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) {
guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
dwc->has_dsm_for_pm = true;
}
if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
struct gpio_desc *gpio;
ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
acpi_dwc3_byt_gpios);
if (ret)
dev_dbg(&pdev->dev, "failed to add mapping table\n");
/*
* These GPIOs will turn on the USB2 PHY. Note that we have to
* put the gpio descriptors again here because the phy driver
* might want to grab them, too.
*/
gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
usleep_range(10000, 11000);
}
}
}
if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
(pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
struct property_entry properties[] = {
PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ },
};
return platform_device_add_properties(dwc3, properties);
}
return 0;
}
static void devm_gpiod_release(struct device *dev, void *res)
{
struct gpio_desc **desc = res;
gpiod_put(*desc);
}
static struct clk *clk_register_gpio(struct device *dev, const char *name,
const char * const *parent_names, u8 num_parents, unsigned gpio,
bool active_low, unsigned long flags,
const struct clk_ops *clk_gpio_ops)
{
struct clk_gpio *clk_gpio;
struct clk *clk;
struct clk_init_data init = {};
unsigned long gpio_flags;
int err;
if (dev)
clk_gpio = devm_kzalloc(dev, sizeof(*clk_gpio), GFP_KERNEL);
else
clk_gpio = kzalloc(sizeof(*clk_gpio), GFP_KERNEL);
if (!clk_gpio)
return ERR_PTR(-ENOMEM);
if (active_low)
gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_HIGH;
else
gpio_flags = GPIOF_OUT_INIT_LOW;
if (dev)
err = devm_gpio_request_one(dev, gpio, gpio_flags, name);
else
err = gpio_request_one(gpio, gpio_flags, name);
if (err) {
if (err != -EPROBE_DEFER)
pr_err("%s: %s: Error requesting clock control gpio %u\n",
__func__, name, gpio);
if (!dev)
kfree(clk_gpio);
return ERR_PTR(err);
}
init.name = name;
init.ops = clk_gpio_ops;
init.flags = flags | CLK_IS_BASIC;
init.parent_names = parent_names;
init.num_parents = num_parents;
clk_gpio->gpiod = gpio_to_desc(gpio);
clk_gpio->hw.init = &init;
if (dev)
clk = devm_clk_register(dev, &clk_gpio->hw);
else
clk = clk_register(NULL, &clk_gpio->hw);
if (!IS_ERR(clk))
return clk;
if (!dev) {
gpiod_put(clk_gpio->gpiod);
kfree(clk_gpio);
}
return clk;
}
static int __init my_init(void)
{
int status = 0;
struct i2c_smbus_alert_setup setup = {
.alert_edge_triggered = 1,
};
struct i2c_adapter *adapter = i2c_get_adapter(6);
if (!adapter) {
pr_err("Failed to find i2c adapter #%d\n", 6);
status = -1;
goto fail;
}
if (!gpio_is_valid(gpioNum)) {
pr_err("GPIO number %d is not valid\n", gpioNum);
goto fail;
}
status = gpio_request_one(gpioNum, GPIOF_DIR_IN, "smbus_alert");
if (status < 0) {
pr_err("GPIO allocation failed, result %d\n", status);
goto fail;
}
setup.irq = gpio_to_irq(gpioNum);
if (setup.irq < 0) {
pr_err("Failed to get gpio interrupt, err is %d\n", setup.irq);
goto release_gpio;
}
#if 1
alert_client = i2c_setup_smbus_alert(adapter, &setup);
if (!alert_client) {
pr_err("Failed to register smbus alert device.\n");
goto release_gpio;
}
i2c_put_adapter(adapter);
#else
status = request_threaded_irq(setup.irq, NULL, my_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"smartio_smbus", &gpioNum);
if (status < 0) {
pr_err("Failed to install interrupt handlert, err is %d\n", status);
goto release_gpio;
}
#endif
pr_warn("Done setting up smbus alert\n");
return status;
release_gpio:
gpio_free(gpioNum);
release_adapter:
i2c_put_adapter(adapter);
fail:
pr_err("Failed setting up smbus alert\n");
return status;
}
module_init(my_init);
static void __exit my_cleanup(void)
{
#if 0
i2c_unregister_device(alert_client);
gpiod_put(gpio);
#endif
gpio_free(gpioNum);
pr_warn("Removed smbus alert\n");
}
static int dwc3_pci_quirks(struct pci_dev *pdev)
{
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
struct dwc3_platform_data pdata;
memset(&pdata, 0, sizeof(pdata));
pdata.has_lpm_erratum = true;
pdata.lpm_nyet_threshold = 0xf;
pdata.u2exit_lfps_quirk = true;
pdata.u2ss_inp3_quirk = true;
pdata.req_p1p2p3_quirk = true;
pdata.del_p1p2p3_quirk = true;
pdata.del_phy_power_chg_quirk = true;
pdata.lfps_filter_quirk = true;
pdata.rx_detect_poll_quirk = true;
pdata.tx_de_emphasis_quirk = true;
pdata.tx_de_emphasis = 1;
/*
* FIXME these quirks should be removed when AMD NL
* taps out
*/
pdata.disable_scramble_quirk = true;
pdata.dis_u3_susphy_quirk = true;
pdata.dis_u2_susphy_quirk = true;
return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
sizeof(pdata));
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
struct gpio_desc *gpio;
acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
acpi_dwc3_byt_gpios);
/*
* These GPIOs will turn on the USB2 PHY. Note that we have to
* put the gpio descriptors again here because the phy driver
* might want to grab them, too.
*/
gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
usleep_range(10000, 11000);
}
}
if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
(pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
struct dwc3_platform_data pdata;
memset(&pdata, 0, sizeof(pdata));
pdata.usb3_lpm_capable = true;
pdata.has_lpm_erratum = true;
pdata.dis_enblslpm_quirk = true;
return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
sizeof(pdata));
}
return 0;
}
static int setup_gpio(struct pi433_device *device)
{
char name[5];
int retval;
int i;
const irq_handler_t DIO_irq_handler[NUM_DIO] = {
DIO0_irq_handler,
DIO1_irq_handler
};
for (i = 0; i < NUM_DIO; i++) {
/* "construct" name and get the gpio descriptor */
snprintf(name, sizeof(name), "DIO%d", i);
device->gpiod[i] = gpiod_get(&device->spi->dev, name,
0 /*GPIOD_IN*/);
if (device->gpiod[i] == ERR_PTR(-ENOENT)) {
dev_dbg(&device->spi->dev,
"Could not find entry for %s. Ignoring.", name);
continue;
}
if (device->gpiod[i] == ERR_PTR(-EBUSY))
dev_dbg(&device->spi->dev, "%s is busy.", name);
if (IS_ERR(device->gpiod[i])) {
retval = PTR_ERR(device->gpiod[i]);
/* release already allocated gpios */
for (i--; i >= 0; i--) {
free_irq(device->irq_num[i], device);
gpiod_put(device->gpiod[i]);
}
return retval;
}
/* configure the pin */
gpiod_unexport(device->gpiod[i]);
retval = gpiod_direction_input(device->gpiod[i]);
if (retval)
return retval;
/* configure irq */
device->irq_num[i] = gpiod_to_irq(device->gpiod[i]);
if (device->irq_num[i] < 0) {
device->gpiod[i] = ERR_PTR(-EINVAL);
return device->irq_num[i];
}
retval = request_irq(device->irq_num[i],
DIO_irq_handler[i],
0, /* flags */
name,
device);
if (retval)
return retval;
dev_dbg(&device->spi->dev, "%s successfully configured", name);
}
return 0;
}
