static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
GSList *l;
gboolean digital_added;
struct sr_channel *ch;
struct dev_context *devc;
struct sr_scpi_dev_inst *scpi;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
scpi = sdi->conn;
devc = sdi->priv;
digital_added = FALSE;
g_slist_free(devc->enabled_channels);
devc->enabled_channels = NULL;
for (l = sdi->channels; l; l = l->next) {
ch = l->data;
if (!ch->enabled)
continue;
/* Only add a single digital channel. */
if (ch->type != SR_CHANNEL_LOGIC || !digital_added) {
devc->enabled_channels = g_slist_append(
devc->enabled_channels, ch);
if (ch->type == SR_CHANNEL_LOGIC)
digital_added = TRUE;
}
}
if (!devc->enabled_channels)
return SR_ERR;
if (hmo_check_channels(devc->enabled_channels) != SR_OK) {
sr_err("Invalid channel configuration specified!");
return SR_ERR_NA;
}
if (hmo_setup_channels(sdi) != SR_OK) {
sr_err("Failed to setup channel configuration!");
return SR_ERR;
}
sr_scpi_source_add(sdi->session, scpi, G_IO_IN, 50,
hmo_receive_data, (void *)sdi);
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
devc->current_channel = devc->enabled_channels;
return hmo_request_data(sdi);
}
SR_PRIV int hmo_receive_data(int fd, int revents, void *cb_data)
{
struct sr_channel *ch;
struct sr_dev_inst *sdi;
struct dev_context *devc;
struct sr_datafeed_packet packet;
GArray *data;
struct sr_datafeed_analog analog;
struct sr_datafeed_logic logic;
(void)fd;
data = NULL;
if (!(sdi = cb_data))
return TRUE;
if (!(devc = sdi->priv))
return TRUE;
if (revents != G_IO_IN)
return TRUE;
ch = devc->current_channel->data;
switch (ch->type) {
case SR_CHANNEL_ANALOG:
if (sr_scpi_get_floatv(sdi->conn, NULL, &data) != SR_OK) {
if (data)
g_array_free(data, TRUE);
return TRUE;
}
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(sdi, &packet);
analog.channels = g_slist_append(NULL, ch);
analog.num_samples = data->len;
analog.data = (float *) data->data;
analog.mq = SR_MQ_VOLTAGE;
analog.unit = SR_UNIT_VOLT;
analog.mqflags = 0;
packet.type = SR_DF_ANALOG;
packet.payload = &analog;
sr_session_send(cb_data, &packet);
g_slist_free(analog.channels);
g_array_free(data, TRUE);
data = NULL;
break;
case SR_CHANNEL_LOGIC:
if (sr_scpi_get_uint8v(sdi->conn, NULL, &data) != SR_OK) {
g_free(data);
return TRUE;
}
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(sdi, &packet);
logic.length = data->len;
logic.unitsize = 1;
logic.data = data->data;
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
sr_session_send(cb_data, &packet);
g_array_free(data, TRUE);
data = NULL;
break;
default:
sr_err("Invalid channel type.");
break;
}
packet.type = SR_DF_FRAME_END;
sr_session_send(sdi, &packet);
if (devc->current_channel->next) {
devc->current_channel = devc->current_channel->next;
hmo_request_data(sdi);
} else if (++devc->num_frames == devc->frame_limit) {
sdi->driver->dev_acquisition_stop(sdi, cb_data);
} else {
devc->current_channel = devc->enabled_channels;
hmo_request_data(sdi);
}
return TRUE;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
GSList *l;
gboolean digital_added[MAX_DIGITAL_GROUP_COUNT];
size_t group, pod_count;
struct sr_channel *ch;
struct dev_context *devc;
struct sr_scpi_dev_inst *scpi;
int ret;
scpi = sdi->conn;
devc = sdi->priv;
/* Preset empty results. */
for (group = 0; group < ARRAY_SIZE(digital_added); group++)
digital_added[group] = FALSE;
g_slist_free(devc->enabled_channels);
devc->enabled_channels = NULL;
/*
* Contruct the list of enabled channels. Determine the highest
* number of digital pods involved in the acquisition.
*/
pod_count = 0;
for (l = sdi->channels; l; l = l->next) {
ch = l->data;
if (!ch->enabled)
continue;
/* Only add a single digital channel per group (pod). */
group = ch->index / 8;
if (ch->type != SR_CHANNEL_LOGIC || !digital_added[group]) {
devc->enabled_channels = g_slist_append(
devc->enabled_channels, ch);
if (ch->type == SR_CHANNEL_LOGIC) {
digital_added[group] = TRUE;
if (pod_count < group + 1)
pod_count = group + 1;
}
}
}
if (!devc->enabled_channels)
return SR_ERR;
devc->pod_count = pod_count;
devc->logic_data = NULL;
/*
* Check constraints. Some channels can be either analog or
* digital, but not both at the same time.
*/
if (hmo_check_channels(devc->enabled_channels) != SR_OK) {
sr_err("Invalid channel configuration specified!");
ret = SR_ERR_NA;
goto free_enabled;
}
/*
* Configure the analog and digital channels and the
* corresponding digital pods.
*/
if (hmo_setup_channels(sdi) != SR_OK) {
sr_err("Failed to setup channel configuration!");
ret = SR_ERR;
goto free_enabled;
}
/*
* Start acquisition on the first enabled channel. The
* receive routine will continue driving the acquisition.
*/
sr_scpi_source_add(sdi->session, scpi, G_IO_IN, 50,
hmo_receive_data, (void *)sdi);
std_session_send_df_header(sdi);
devc->current_channel = devc->enabled_channels;
return hmo_request_data(sdi);
free_enabled:
g_slist_free(devc->enabled_channels);
devc->enabled_channels = NULL;
return ret;
}
SR_PRIV int hmo_receive_data(int fd, int revents, void *cb_data)
{
struct sr_channel *ch;
struct sr_dev_inst *sdi;
struct dev_context *devc;
struct scope_state *state;
struct sr_datafeed_packet packet;
GByteArray *data;
struct sr_datafeed_analog analog;
struct sr_analog_encoding encoding;
struct sr_analog_meaning meaning;
struct sr_analog_spec spec;
struct sr_datafeed_logic logic;
(void)fd;
(void)revents;
data = NULL;
if (!(sdi = cb_data))
return TRUE;
if (!(devc = sdi->priv))
return TRUE;
/* Although this is correct in general, the USBTMC libusb implementation
* currently does not generate an event prior to the first read. Often
* it is ok to start reading just after the 50ms timeout. See bug #785.
if (revents != G_IO_IN)
return TRUE;
*/
ch = devc->current_channel->data;
state = devc->model_state;
switch (ch->type) {
case SR_CHANNEL_ANALOG:
if (sr_scpi_get_block(sdi->conn, NULL, &data) != SR_OK) {
if (data)
g_byte_array_free(data, TRUE);
return TRUE;
}
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(sdi, &packet);
packet.type = SR_DF_ANALOG;
analog.data = data->data;
analog.num_samples = data->len / sizeof(float);
analog.encoding = &encoding;
analog.meaning = &meaning;
analog.spec = &spec;
encoding.unitsize = sizeof(float);
encoding.is_signed = TRUE;
encoding.is_float = TRUE;
encoding.is_bigendian = FALSE;
encoding.digits = 0;
encoding.is_digits_decimal = FALSE;
encoding.scale.p = 1;
encoding.scale.q = 1;
encoding.offset.p = 0;
encoding.offset.q = 1;
if (state->analog_channels[ch->index].probe_unit == 'V') {
meaning.mq = SR_MQ_VOLTAGE;
meaning.unit = SR_UNIT_VOLT;
} else {
meaning.mq = SR_MQ_CURRENT;
meaning.unit = SR_UNIT_AMPERE;
}
meaning.mqflags = 0;
meaning.channels = g_slist_append(NULL, ch);
spec.spec_digits = 0;
packet.payload = &analog;
sr_session_send(sdi, &packet);
g_slist_free(meaning.channels);
g_byte_array_free(data, TRUE);
data = NULL;
break;
case SR_CHANNEL_LOGIC:
if (sr_scpi_get_block(sdi->conn, NULL, &data) != SR_OK) {
g_free(data);
return TRUE;
}
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(sdi, &packet);
logic.length = data->len;
logic.unitsize = 1;
logic.data = data->data;
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
sr_session_send(sdi, &packet);
g_byte_array_free(data, TRUE);
data = NULL;
break;
default:
sr_err("Invalid channel type.");
break;
}
packet.type = SR_DF_FRAME_END;
sr_session_send(sdi, &packet);
if (devc->current_channel->next) {
devc->current_channel = devc->current_channel->next;
hmo_request_data(sdi);
} else if (++devc->num_frames == devc->frame_limit) {
sdi->driver->dev_acquisition_stop(sdi);
} else {
devc->current_channel = devc->enabled_channels;
hmo_request_data(sdi);
}
return TRUE;
}
