static ssize_t proc_bt_preproto_write(struct file *file, const char __user *buf,
size_t length, loff_t *ppos)
{
char preproto;
BT_INFO("");
if (length < 1)
return -EINVAL;
if (copy_from_user(&preproto, buf, 1))
return -EFAULT;
if (preproto == '1') {
if(bsi->uport == NULL) {
BT_INFO("NULL");
bsi->uport = msm_hs_get_bt_uport(BT_PORT_NUM);
} else {
BT_INFO("NOT NULL");
}
hsuart_power(1);
}
/* claim that we wrote everything */
return length;
}
/**
* Cleans up the module.
*/
static void __exit bluesleep_exit(void)
{
if (bsi == NULL)
return;
/* assert bt wake */
if (bsi->has_ext_wake == 1)
gpio_set_value(bsi->ext_wake, 0);
clear_bit(BT_EXT_WAKE, &flags);
if (test_bit(BT_PROTO, &flags)) {
if (disable_irq_wake(bsi->host_wake_irq))
BT_ERR("Couldn't disable hostwake IRQ wakeup mode");
free_irq(bsi->host_wake_irq, NULL);
del_timer(&tx_timer);
if (test_bit(BT_ASLEEP, &flags))
hsuart_power(1);
}
platform_driver_unregister(&bluesleep_driver);
remove_proc_entry("btwrite", sleep_dir);
remove_proc_entry("lpm", sleep_dir);
remove_proc_entry("sleep", bluetooth_dir);
remove_proc_entry("bluetooth", 0);
}
/**
* @brief@ main sleep work handling function which update the flags
* and activate and deactivate UART ,check FIFO.
*/
static void bluesleep_sleep_work(struct work_struct *work)
{
if (bluesleep_can_sleep()) {
/* already asleep, this is an error case */
if (test_bit(BT_ASLEEP, &flags)) {
BT_INFO("already asleep");
return;
}
if (msm_hs_tx_empty(bsi->uport)) {
BT_INFO("going to sleep...");
set_bit(BT_ASLEEP, &flags);
/*Deactivating UART */
hsuart_power(0);
/* UART clk is not turned off immediately. Release
* wakelock after 500 ms.
*/
#ifdef USE_WAKELOCK
wake_lock_timeout(&bsi->wake_lock, HZ / 2);
#endif
} else {
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
return;
}
} else {
bluesleep_sleep_wakeup();
}
}
/**
* Stops the Sleep-Mode Protocol on the Host.
*/
static void gpiosleep_stop(void)
{
unsigned long irq_flags;
spin_lock_irqsave(&rw_lock, irq_flags);
if (!test_bit(FLAG_PROTO, &flags)) {
spin_unlock_irqrestore(&rw_lock, irq_flags);
return;
}
/* assert MTK_WAKE */
gpio_set_value(gsi->ext_wake, 0);
GS_DBG("ext_wake gpio set value 0");
del_timer(&tx_timer);
clear_bit(FLAG_PROTO, &flags);
if (test_bit(FLAG_ASLEEP, &flags)) {
clear_bit(FLAG_ASLEEP, &flags);
hsuart_power(1);
}
atomic_inc(&open_count);
spin_unlock_irqrestore(&rw_lock, irq_flags);
if (disable_irq_wake(gsi->host_wake_irq))
GS_ERR("Couldn't disable hostwake IRQ wakeup mode\n");
free_irq(gsi->host_wake_irq, NULL);
}
void bluesleep_sleep_wakeup(void)
{
unsigned ext_value=0;
#ifdef WAKE_GPIO_ACTIVE_HIGH
ext_value=1;
#endif //WAKE_GPIO_ACTIVE_HIGH
/* Start the timer */
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (test_bit(BT_ASLEEP, &flags)) {
BT_INFO("waking up...");
#ifdef USE_WAKELOCK
wake_lock(&bsi->wake_lock);
#endif
/* Start the timer */
//mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
#ifndef BTLD_CONTROL_WAKE_GPIO
gpio_set_value(bsi->ext_wake, ext_value);
#endif //BTLD_CONTROL_WAKE_GPIO
clear_bit(BT_ASLEEP, &flags);
/*Activating UART */
hsuart_power(1);
}
}
void gpiosleep_sleep_wakeup(void)
{
if (test_bit(FLAG_ASLEEP, &flags)) {
GS_DBG("waking up...");
/* Start the timer */
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
gpio_set_value(gsi->ext_wake, 0);
GS_DBG("ext_wake gpio set value 0");
clear_bit(FLAG_ASLEEP, &flags);
/*Activating UART */
hsuart_power(1);
}
else
{
/*Tx idle, Rx busy, we must also make host_wake asserted, that is low
* 1 means mtk chip can sleep, in gpiosleep.c
*/
/* Here we depend on the status of MSM gpio, for stability */
if(1 == gpio_get_value(gsi->host_wake))
{
GS_DBG("-gpiosleep_sleep_wakeup wakeup mtk chip");
/*0 means wakup MTK chip */
gpio_set_value(gsi->ext_wake, 0);
GS_DBG("ext_wake gpio set value 0");
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
} else
{
GS_DBG("hit here?");
}
}
}
/**
* Cleans up the module.
*/
static void __exit bluesleep_exit(void)
{
if (bsi == NULL)
return;
/* assert bt wake */
if (bsi->has_ext_wake == 1) {
int ret;
ret = ice_gpiox_set(bsi->ext_wake, 1);
if (ret)
BT_ERR("(bluesleep_exit) failed to set ext_wake 1.");
}
set_bit(BT_EXT_WAKE, &flags);
if (test_bit(BT_PROTO, &flags)) {
if (disable_irq_wake(bsi->host_wake_irq))
BT_ERR("Couldn't disable hostwake IRQ wakeup mode\n");
free_irq(bsi->host_wake_irq, NULL);
del_timer(&tx_timer);
if (test_bit(BT_ASLEEP, &flags))
hsuart_power(1);
}
platform_driver_unregister(&bluesleep_driver);
remove_proc_entry("btwrite", sleep_dir);
remove_proc_entry("lpm", sleep_dir);
remove_proc_entry("asleep", sleep_dir);
remove_proc_entry("proto", sleep_dir);
remove_proc_entry("hostwake", sleep_dir);
remove_proc_entry("btwake", sleep_dir);
remove_proc_entry("sleep", bluetooth_dir);
remove_proc_entry("bluetooth", 0);
mutex_destroy(&bluesleep_mutex);
}
void bluesleep_sleep_wakeup(void)
{
if (test_bit(BT_ASLEEP, &flags)) {
BT_DBG("waking up...");
/*Activating UART */
hsuart_power(1);
wake_lock(&bsi->wake_lock);
/* Start the timer */
mod_timer(&tx_timer,
jiffies + msecs_to_jiffies(TX_TIMER_INTERVAL * 1000));
if (bsi->has_ext_wake == 1) {
int ret;
ret = ice_gpiox_set(bsi->ext_wake, 1);
if (ret)
{
BT_ERR("(bluesleep_sleep_wakeup) failed to set ext_wake 1.");
ret = ice_gpiox_set(bsi->ext_wake, 1);
BT_ERR("ret = %d", ret);
}
}
set_bit(BT_EXT_WAKE, &flags);
clear_bit(BT_ASLEEP, &flags);
}
else {
BT_DBG("bluesleep_sleep_wakeup : already wake up, so start timer...");
mod_timer(&tx_timer,
jiffies + msecs_to_jiffies(TX_TIMER_INTERVAL * 1000));
}
}
/**
* Stops the Sleep-Mode Protocol on the Host.
*/
static void bluesleep_stop(void)
{
if (!test_bit(BT_PROTO, &flags)) {
BT_ERR("(bluesleep_stop_wq) proto is not set. Failed to stop bluesleep");
bsi->uport = NULL;
return;
}
/* assert BT_WAKE */
if (bsi->has_ext_wake == 1) {
int ret;
ret = ice_gpiox_set(bsi->ext_wake, 1);
if (ret)
BT_ERR("(bluesleep_stop) failed to set ext_wake 1.");
}
set_bit(BT_EXT_WAKE, &flags);
del_timer(&tx_timer);
clear_bit(BT_PROTO, &flags);
if (test_bit(BT_ASLEEP, &flags)) {
clear_bit(BT_ASLEEP, &flags);
hsuart_power(1);
}
if (disable_irq_wake(bsi->host_wake_irq))
BT_ERR("Couldn't disable hostwake IRQ wakeup mode\n");
wake_lock_timeout(&bsi->wake_lock, msecs_to_jiffies(125));
bsi->uport = NULL;
}
/**
* Handles proper timer action when outgoing data is delivered to the
* HCI line discipline. Sets BT_TXDATA.
*/
static void bluesleep_outgoing_data(void)
{
if (mutex_is_locked(&bluesleep_mutex))
BT_DBG("Wait for mutex unlock in bluesleep_outgoing_data");
mutex_lock(&bluesleep_mutex);
/* log data passing by */
set_bit(BT_TXDATA, &flags);
BT_DBG("bluesleep_outgoing_data.");
if (!test_bit(BT_EXT_WAKE, &flags))
BT_DBG("BT_EXT_WAKE freed");
if (!test_bit(BT_ASLEEP, &flags))
BT_DBG("BT_ASLEEP freed");
/*
** Uart Clk should be enabled promptly
** before bluedroid write TX data.
*/
hsuart_power(1);
bluesleep_tx_data_wakeup();
mutex_unlock(&bluesleep_mutex);
}
void bluetooth_pm_sleep(void)
{
unsigned long irq_flags;
//printk("+++ %s\n", __func__);
spin_lock_irqsave(&rw_lock, irq_flags);
/* already asleep, this is an error case */
if (test_bit(BT_ASLEEP, &flags)) {
spin_unlock_irqrestore(&rw_lock, irq_flags);
printk("--- %s, already asleep return\n", __func__);
return;
}
//BT_S : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT
uart_off_jiffies = jiffies;
if(check_uart_control_available(uart_on_jiffies, uart_off_jiffies) == false)
{
mod_timer(&uart_control_timer, jiffies + msecs_to_jiffies(UART_CONTROL_BLOCK_TIME));
spin_unlock_irqrestore(&rw_lock, irq_flags);
printk("--- %s - UART control unavailable Return\n", __func__);
return;
}
//BT_E : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT
set_bit(BT_ASLEEP, &flags);
spin_unlock_irqrestore(&rw_lock, irq_flags);
printk("%s, going to sleep...\n", __func__);
//printk("%s, WAKE_UNLOCK_START\n", __func__);
wake_unlock(&bsi->wake_lock);
//printk("%s, WAKE_UNLOCK_END\n", __func__);
#ifdef UART_CONTROL_MSM
/*Deactivating UART */
hsuart_power(0);
#endif /*UART_CONTROL_MSM*/
#ifdef QOS_REQUEST_MSM
if(bsi->dma_qos_request == REQUESTED) {
pm_qos_update_request(&bsi->dma_qos, 0x7FFFFFF);
}
#endif /* QOS_REQUEST_MSM */
#ifdef QOS_REQUEST_TEGRA
pm_qos_update_request(&bsi->resume_cpu_freq_req,
PM_QOS_DEFAULT_VALUE);
#endif/*QOS_REQUEST_TEGRA*/
//printk("--- %s\n", __func__);
}
/**
* @brief@ main sleep work handling function which update the flags
* and activate and deactivate UART ,check FIFO.
*/
static void bluesleep_sleep_work(struct work_struct *work)
{
if (mutex_is_locked(&bluesleep_mutex))
BT_DBG("Wait for mutex unlock in bluesleep_sleep_work");
mutex_lock(&bluesleep_mutex);
if (bluesleep_can_sleep()) {
/* already asleep, this is an error case */
if (test_bit(BT_ASLEEP, &flags)) {
BT_DBG("already asleep");
mutex_unlock(&bluesleep_mutex);
return;
}
if (msm_hs_tx_empty(bsi->uport)) {
if (test_bit(BT_TXDATA, &flags)) {
BT_DBG("TXDATA remained. Wait until timer expires.");
mod_timer(&tx_timer, jiffies + TX_TIMER_INTERVAL * HZ);
mutex_unlock(&bluesleep_mutex);
return;
}
BT_DBG("going to sleep...");
set_bit(BT_ASLEEP, &flags);
/*Deactivating UART */
hsuart_power(0);
/*Deactivating UART */
/* UART clk is not turned off immediately. Release
* wakelock after 500 ms.
*/
wake_lock_timeout(&bsi->wake_lock, HZ / 2);
} else {
BT_DBG("host can enter sleep but some tx remained.");
mod_timer(&tx_timer, jiffies + TX_TIMER_INTERVAL * HZ);
mutex_unlock(&bluesleep_mutex);
return;
}
} else if (!test_bit(BT_EXT_WAKE, &flags)
&& !test_bit(BT_ASLEEP, &flags)) {
BT_DBG("host_wake high and BT_EXT_WAKE & BT_ASLEEP is freed.");
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (bsi->has_ext_wake == 1) {
gpio_set_value(bsi->ext_wake, 1);
}
set_bit(BT_EXT_WAKE, &flags);
} else {
bluesleep_sleep_wakeup();
}
mutex_unlock(&bluesleep_mutex);
}
static int bluetooth_power_param_set(const char *val, struct kernel_param *kp)
{
int ret;
printk(KERN_DEBUG
"%s: previous power_state=%d\n",
__func__, bluetooth_power_state);
/* lock change of state and reference */
spin_lock(&bt_power_lock);
ret = param_set_bool(val, kp);
if (power_control) {
if (!ret){
ret = (*power_control)(bluetooth_power_state);
printk(KERN_ERR "%s: bluetooth power control, return = (%d)\n",
__func__, ret);
}
else{
printk(KERN_ERR "%s param set bool failed (%d)\n",
__func__, ret);
}
} else {
printk(KERN_INFO
"%s: deferring power switch until probe\n",
__func__);
}
spin_unlock(&bt_power_lock);
printk(KERN_INFO
"%s: current power_state=%d\n",
__func__, bluetooth_power_state);
if(bluetooth_power_state == 0){
hsuart_power(0);
gpio_set_value(16,0);
msleep(105);
gpio_set_value(48,0);
}
else{
gpio_set_value(16,0);
msleep(1);
gpio_set_value(48,1);
msleep(105);
gpio_set_value(16,1);
}
printk(" ***** ----------- --------- GPIO 48 = %d\n",gpio_get_value(48));
printk(" ***** ----------- --------- GPIO 16 = %d\n",gpio_get_value(16));
return ret;
}
void bluesleep_sleep_wakeup(void)
{
if (test_bit(BT_ASLEEP, &flags)) {
BT_DBG("waking up...");
/*Activating UART */
hsuart_power(1);
wake_lock(&bsi->wake_lock);
/* Start the timer */
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (bsi->has_ext_wake == 1) {
gpio_set_value(bsi->ext_wake, 1);
}
set_bit(BT_EXT_WAKE, &flags);
clear_bit(BT_ASLEEP, &flags);
}
}
static int bluesleep_resume(struct platform_device *pdev)
{
if (test_bit(BT_SUSPEND, &flags)) {
if (!bt_enabled) {
gpio_tlmm_config(GPIO_CFG(bsi->host_wake, 0, GPIO_CFG_INPUT,
GPIO_CFG_NO_PULL, GPIO_CFG_16MA), GPIO_CFG_ENABLE);
}
clear_bit(BT_SUSPEND, &flags);
if ((bsi->uport != NULL) &&
(gpio_get_value(bsi->host_wake) == bsi->irq_polarity)) {
BT_DBG("bluesleep resume form BT event...");
hsuart_power(1);
}
}
return 0;
}
void bluesleep_sleep_wakeup(void)
{
/* Start the timer */
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (test_bit(BT_ASLEEP, &flags)) {
BT_INFO("bluesleep_sleep_wakeup-waking up...");
wake_lock(&bsi->wake_lock);
/* Start the timer */
//mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
#ifndef BTLD_CONTROL_WAKE_GPIO
gpio_set_value(bsi->ext_wake, defined(WAKE_GPIO_ACTIVE_HIGH) ? 1 : 0);
#endif /* BTLD_CONTROL_WAKE_GPIO */
clear_bit(BT_ASLEEP, &flags);
/*Activating UART */
hsuart_power(1);
}
}
/**
* @brief@ main sleep work handling function which update the flags
* and activate and deactivate UART ,check FIFO.
*/
static void bluesleep_sleep_work(struct work_struct *work)
{
if (bluesleep_can_sleep()) {
/* already asleep, this is an error case */
if (test_bit(BT_ASLEEP, &flags)) {
if (debug_mask & DEBUG_SUSPEND)
pr_info("already asleep\n");
return;
}
if (msm_hs_tx_empty(bsi->uport)) {
if (debug_mask & DEBUG_SUSPEND)
pr_info("going to sleep...\n");
set_bit(BT_ASLEEP, &flags);
/*Deactivating UART */
hsuart_power(0);
/* UART clk is not turned off immediately. Release
* wakelock after 125 ms.
*/
wake_lock_timeout(&bsi->wake_lock, HZ / 8);
} else {
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
return;
}
} else if (test_bit(BT_EXT_WAKE, &flags)
&& !test_bit(BT_ASLEEP, &flags)) {
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (debug_mask & DEBUG_BTWAKE)
pr_info("BT WAKE: set to wake\n");
if (bsi->has_ext_wake == 1)
gpio_set_value(bsi->ext_wake, 0);
clear_bit(BT_EXT_WAKE, &flags);
} else {
bluesleep_sleep_wakeup();
}
}
void gpiosleep_uart_open(struct uart_port *uport)
{
unsigned long irq_flags;
GS_DBG("gpiosleep_uart_open");
spin_lock_irqsave(&rw_lock, irq_flags);
if (!test_bit(FLAG_PROTO, &flags)) {
spin_unlock_irqrestore(&rw_lock, irq_flags);
return;
}
spin_unlock_irqrestore(&rw_lock, irq_flags);
hsuart_power(1); // must do this, other wise, mtk_cmux set baud rate before uart power on.
if(gsi->uport == NULL) {
GS_DBG("gpiosleep_uart_open done");
gsi->uport = uport;
}
}
static int __devexit gpiosleep_remove(struct platform_device *pdev)
{
/* assert mtk wake */
gpio_set_value(gsi->ext_wake, 0);
GS_DBG("ext_wake gpio set value 0");
if (test_bit(FLAG_PROTO, &flags)) {
if (disable_irq_wake(gsi->host_wake_irq))
GS_ERR("Couldn't disable hostwake IRQ wakeup mode \n");
free_irq(gsi->host_wake_irq, NULL);
del_timer(&tx_timer);
if (test_bit(FLAG_ASLEEP, &flags))
hsuart_power(1);
}
gpio_free(gsi->host_wake);
gpio_free(gsi->ext_wake);
kfree(gsi);
destroy_workqueue(gpiosleep_workqueue);
gpiosleep_workqueue = NULL;
gpiosleep_remove_proc_entry();
return 0;
}
/**
* Handles proper timer action when outgoing data is delivered to the
* HCI line discipline. Sets BT_TXDATA.
*/
static void bluesleep_outgoing_data(void)
{
/* prevent entered upload mode or bt reset. */
/* if bluesleep_tx_timer_expire routine triggered, max 10ms wait for finish.
*/
int i;
for(i=0; i<10 && !test_bit(BT_TXDATA, &flags)
&& !test_bit(BT_EXT_WAKE, &flags)
&& !test_bit(BT_ASLEEP, &flags); i++) {
BT_DBG("bluesleep_tx_timer_expire routine has not yet finished. 1ms sleep");
usleep(1000);
}
if (mutex_is_locked(&bluesleep_mutex))
BT_DBG("Wait for mutex unlock in bluesleep_outgoing_data");
mutex_lock(&bluesleep_mutex);
/* log data passing by */
set_bit(BT_TXDATA, &flags);
BT_DBG("bluesleep_outgoing_data.");
if (!test_bit(BT_EXT_WAKE, &flags))
BT_DBG("BT_EXT_WAKE freed");
if (!test_bit(BT_ASLEEP, &flags))
BT_DBG("BT_ASLEEP freed");
/*
** Uart Clk should be enabled promptly
** before bluedroid write TX data.
*/
hsuart_power(1);
bluesleep_tx_data_wakeup();
mutex_unlock(&bluesleep_mutex);
}
/**
* @brief@ main sleep work handling function which update the flags
* and activate and deactivate UART ,check FIFO.
*/
static void gpiosleep_sleep_work(struct work_struct *work)
{
if (gpiosleep_can_sleep()) {
/* already asleep, this is an error case */
if (test_bit(FLAG_ASLEEP, &flags)) {
GS_DBG("already asleep");
return;
}
if (msm_hs_tx_empty(gsi->uport)) {
GS_DBG("going to sleep...");
set_bit(FLAG_ASLEEP, &flags);
/*Deactivating UART */
hsuart_power(0);
} else {
GS_DBG("fifo has data to send, not sleep...");
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
return;
}
} else {
gpiosleep_sleep_wakeup();
}
}
/**
* Stops the Sleep-Mode Protocol on the Host.
*/
static void bluesleep_stop(void)
{
unsigned long irq_flags;
spin_lock_irqsave(&rw_lock, irq_flags);
if (!test_bit(BT_PROTO, &flags)) {
spin_unlock_irqrestore(&rw_lock, irq_flags);
return;
}
/* assert BT_WAKE */
if (debug_mask & DEBUG_BTWAKE)
pr_info("BT WAKE: set to wake\n");
if (bsi->has_ext_wake == 1)
gpio_set_value(bsi->ext_wake, 0);
clear_bit(BT_EXT_WAKE, &flags);
del_timer(&tx_timer);
clear_bit(BT_PROTO, &flags);
if (test_bit(BT_ASLEEP, &flags)) {
clear_bit(BT_ASLEEP, &flags);
spin_unlock_irqrestore(&rw_lock, irq_flags);
hsuart_power(1);
} else {
spin_unlock_irqrestore(&rw_lock, irq_flags);
}
atomic_inc(&open_count);
if (disable_irq_wake(bsi->host_wake_irq))
BT_ERR("Couldn't disable hostwake IRQ wakeup mode");
wake_lock_timeout(&bsi->wake_lock, HZ / 8);
}
void bluesleep_sleep_wakeup(void)
{
if (test_bit(BT_ASLEEP, &flags)) {
if (debug_mask & DEBUG_SUSPEND)
pr_info("waking up...\n");
wake_lock(&bsi->wake_lock);
/* Start the timer */
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (debug_mask & DEBUG_BTWAKE)
pr_info("BT WAKE: set to wake\n");
if (bsi->has_ext_wake == 1)
gpio_set_value(bsi->ext_wake, 0);
clear_bit(BT_EXT_WAKE, &flags);
clear_bit(BT_ASLEEP, &flags);
/*Activating UART */
hsuart_power(1);
}
}
/**
* @brief@ main sleep work handling function which update the flags
* and activate and deactivate UART ,check FIFO.
*/
static void bluesleep_sleep_work(struct work_struct *work)
{
#if 0 //For debug : defined(CONFIG_SEC_MIF_UART_SWITCH)
int uart_sel = 0;
#endif
if (mutex_is_locked(&bluesleep_mutex))
BT_DBG("Wait for mutex unlock in bluesleep_sleep_work");
if (bsi->uport == NULL) {
BT_DBG("bluesleep_sleep_work - uport is null");
return;
}
if (bsi->uport->state == NULL) {
BT_DBG("bluesleep_sleep_work - bsi->uport->state is null");
return;
}
if (bsi->uport->state->port.tty == NULL) {
BT_DBG("bluesleep_sleep_work - bsi->uport->state->port.tty is null");
return;
}
mutex_lock(&bluesleep_mutex);
if (bluesleep_can_sleep()) {
/* already asleep, this is an error case */
if (test_bit(BT_ASLEEP, &flags)) {
BT_DBG("already asleep");
mutex_unlock(&bluesleep_mutex);
return;
}
if (msm_hs_tx_empty(bsi->uport)) {
if (test_bit(BT_TXDATA, &flags)) {
BT_DBG("TXDATA remained. Wait until timer expires.");
mod_timer(&tx_timer, jiffies + TX_TIMER_INTERVAL * HZ);
mutex_unlock(&bluesleep_mutex);
return;
}
#if 0 //For debug : defined(CONFIG_SEC_MIF_UART_SWITCH)
if(system_rev <= 6 /*board rev 06*/) {
uart_sel = gpio_get_value(GPIO_UART_SEL);
}
else{
uart_sel = gpio_get_value(GPIO_UART_SEL_REV07);
}
if (uart_sel ==1) {
BT_DBG("bluesleep_sleep_work GPIO_UART_SEL (%d)", uart_sel);
return;
}
#endif
BT_DBG("going to sleep...");
set_bit(BT_ASLEEP, &flags);
/*Deactivating UART */
hsuart_power(0);
/* Moved from Timer expired */
if (bsi->has_ext_wake == 1)
gpio_set_value(bsi->ext_wake, 0);
clear_bit(BT_EXT_WAKE, &flags);
/*Deactivating UART */
/* UART clk is not turned off immediately. Release
* wakelock after 500 ms.
*/
wake_lock_timeout(&bsi->wake_lock, HZ / 2);
} else {
BT_DBG("host can enter sleep but some tx remained.");
mod_timer(&tx_timer, jiffies + TX_TIMER_INTERVAL * HZ);
mutex_unlock(&bluesleep_mutex);
return;
}
} else if (!test_bit(BT_EXT_WAKE, &flags)
&& !test_bit(BT_ASLEEP, &flags)) {
BT_DBG("host_wake high and BT_EXT_WAKE & BT_ASLEEP already freed.");
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (bsi->has_ext_wake == 1) {
gpio_set_value(bsi->ext_wake, 1);
}
set_bit(BT_EXT_WAKE, &flags);
} else {
bluesleep_sleep_wakeup();
}
mutex_unlock(&bluesleep_mutex);
}
void bluetooth_pm_wakeup(void)
{
unsigned long irq_flags;
//printk("+++ %s\n", __func__);
spin_lock_irqsave(&rw_lock, irq_flags);
if (test_bit(BT_ASLEEP, &flags)) {
printk("%s, waking up...\n", __func__);
//BT_S : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT
uart_on_jiffies = jiffies;
if(check_uart_control_available(uart_off_jiffies, uart_on_jiffies) == false)
{
mod_timer(&uart_control_timer, jiffies + msecs_to_jiffies(UART_CONTROL_BLOCK_TIME));
spin_unlock_irqrestore(&rw_lock, irq_flags);
printk("--- %s - UART control unavailable Return\n", __func__);
return;
}
//BT_E : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT
clear_bit(BT_ASLEEP, &flags);
spin_unlock_irqrestore(&rw_lock, irq_flags);
#ifdef QOS_REQUEST_MSM
if(bsi->dma_qos_request == REQUESTED) {
pm_qos_update_request(&bsi->dma_qos, 19);
}
#endif/*QOS_REQUEST_MSM*/
#ifdef QOS_REQUEST_TEGRA
if (bsi->resume_min_frequency)
pm_qos_update_request(&bsi->resume_cpu_freq_req,
bsi->resume_min_frequency);
#endif/*QOS_REQUEST_TEGRA*/
//printk("%s, WAKE_LOCK_START\n", __func__);
wake_lock(&bsi->wake_lock);
//printk("%s, WAKE_LOCK_END\n", __func__);
#ifdef UART_CONTROL_MSM
/*Activating UART */
hsuart_power(1);
#endif/*UART_CONTROL_MSM*/
}
else
{
int wake, host_wake;
wake = gpio_get_value(bsi->ext_wake);
host_wake = gpio_get_value(bsi->host_wake);
spin_unlock_irqrestore(&rw_lock, irq_flags);
//printk("%s, %d, %d\n", __func__, wake, host_wake);
if(wake == DEASSERT && host_wake == ASSERT)
{
printk("%s - Start Timer : check hostwake status when timer expired\n", __func__);
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
}
#ifdef UART_CONTROL_MSM
//printk("%s, Workaround for uart runtime suspend : Check UART Satus", __func__);
//if(bsi->uport != NULL && msm_hs_get_bt_uport_clock_state(bsi->uport) == CLOCK_REQUEST_AVAILABLE)
//{
// printk("%s, Enter abnormal status, HAVE to Call hsuart_power(1)!", __func__);
// hsuart_power(1);
//}
#endif /*UART_CONTROL_MSM*/
}
//printk("--- %s\n", __func__);
}
