static void __init htcleo_init(void)
{
printk("htcleo_init()\n");
msm_hw_reset_hook = htcleo_reset;
do_grp_reset();
do_sdc1_reset();
msm_acpu_clock_init(&htcleo_clock_data);
perflock_init(&htcleo_perflock_data);
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
&msm_device_uart1.dev, 1, MSM_GPIO_TO_INT(139));
#endif
init_dex_comm();
parse_tag_bdaddr();
config_gpio_table(bt_gpio_table, ARRAY_SIZE(bt_gpio_table));
bt_export_bd_address();
htcleo_audio_init();
msm_device_i2c_init();
/* set the gpu power rail to manual mode so clk en/dis will not
* turn off gpu power, and hang it on resume */
htcleo_kgsl_power_rail_mode(0);
htcleo_kgsl_power(false);
mdelay(100);
htcleo_kgsl_power(true);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
msm_device_uart_dm1.name = "msm_serial_hs"; /* for bcm */
msm_device_uart_dm1.resource[3].end = 6;
platform_add_devices(devices, ARRAY_SIZE(devices));
htcleo_init_panel();
#ifdef CONFIG_USB_ANDROID
htcleo_add_usb_devices();
#endif
i2c_register_board_info(0, base_i2c_devices, ARRAY_SIZE(base_i2c_devices));
htcleo_init_mmc(0);
platform_device_register(&htcleo_timed_gpios);
//#ifdef CONFIG_HTCLEO_BLINK_ON_BOOT
/* Blink the camera LED shortly to show that we're alive! */
htcleo_blink_camera_led();
//#endif // CONFIG_HTCLEO_BLINK_ON_BOOT
}
static void __init htcleo_init(void)
{
#ifdef CONFIG_HTCLEO_BLINK_AT_BOOT
volatile unsigned *bank6_in, *bank6_out;
#endif
printk("htcleo_init()\n");
msm_hw_reset_hook = htcleo_reset;
#ifdef CONFIG_PERFLOCK
perflock_init(&htcleo_perflock_data);
#endif
msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
&msm_device_uart1.dev, 1, MSM_GPIO_TO_INT(139));
// config_gpio_table(misc_gpio_table, ARRAY_SIZE(misc_gpio_table));
config_gpio_table(bt_gpio_table, ARRAY_SIZE(bt_gpio_table));
gpio_request(HTCLEO_GPIO_TP_LS_EN, "tp_ls_en");
gpio_direction_output(HTCLEO_GPIO_TP_LS_EN, 0);
gpio_request(HTCLEO_GPIO_TP_EN, "tp_en");
gpio_direction_output(HTCLEO_GPIO_TP_EN, 0);
// gpio_request(HTCLEO_GPIO_PROXIMITY_EN, "proximity_en");
// gpio_direction_output(HTCLEO_GPIO_PROXIMITY_EN, 1);
gpio_request(HTCLEO_GPIO_LS_EN_N, "ls_en");
gpio_request(HTCLEO_GPIO_COMPASS_RST_N, "compass_rst");
gpio_direction_output(HTCLEO_GPIO_COMPASS_RST_N, 1);
gpio_request(HTCLEO_GPIO_COMPASS_INT_N, "compass_int");
gpio_direction_input(HTCLEO_GPIO_COMPASS_INT_N);
gpio_request(HTCLEO_GPIO_DS2482_SLP_N, "ds2482_slp_n");
/* set the gpu power rail to manual mode so clk en/dis will not
* turn off gpu power, and hang it on resume */
htcleo_kgsl_power_rail_mode(0);
htcleo_kgsl_power(true);
msm_device_hsusb.dev.platform_data = &msm_hsusb_pdata;
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
platform_add_devices(devices, ARRAY_SIZE(devices));
i2c_register_board_info(0, base_i2c_devices,
ARRAY_SIZE(base_i2c_devices));
if (htcleo_init_mmc(system_rev, debug_uart) != 0)
pr_crit("%s: Unable to initialize MMC\n", __func__);
htcleo_audio_init();
htcleo_headset_init();
platform_device_register(&htcleo_timed_gpios);
ds2784_battery_init();
msm_acpu_clock_init(&htcleo_clock_data);
//} what's this??
#ifdef CONFIG_SERIAL_MSM_HS
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
msm_device_uart_dm1.name = "msm_serial_hs"; /* for bcm */
msm_device_uart_dm1.resource[3].end = 6;
#endif
config_gpio_table(bt_gpio_table, ARRAY_SIZE(bt_gpio_table));
// bt_export_bd_address();
htcleo_audio_init();
// msm_device_i2c_init();
/* set the gpu power rail to manual mode so clk en/dis will not
* turn off gpu power, and hang it on resume */
htcleo_kgsl_power_rail_mode(0);
htcleo_kgsl_power(false);
mdelay(100);
htcleo_kgsl_power(true);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcleo_init_panel();
i2c_register_board_info(0, base_i2c_devices, ARRAY_SIZE(base_i2c_devices));
#ifdef CONFIG_USB_ANDROID
// htcleo_add_usb_devices();
#endif
// htcleo_init_mmc(0);
platform_device_register(&htcleo_timed_gpios);
/* Blink the camera LED shortly to show that we're alive! */
#ifdef CONFIG_HTCLEO_BLINK_AT_BOOT
bank6_in = (unsigned int*)(MSM_GPIO1_BASE + 0x0864);
bank6_out = (unsigned int*)(MSM_GPIO1_BASE + 0x0814);
*bank6_out = *bank6_in ^ 0x200000;
mdelay(50);
*bank6_out = *bank6_in | 0x200000;
mdelay(200);
#endif
}