/**
* i40e_asq_send_command - send command to Admin Queue
* @hw: pointer to the hw struct
* @desc: prefilled descriptor describing the command (non DMA mem)
* @buff: buffer to use for indirect commands
* @buff_size: size of buffer for indirect commands
* @cmd_details: pointer to command details structure
*
* This is the main send command driver routine for the Admin Queue send
* queue. It runs the queue, cleans the queue, etc
**/
enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw,
struct i40e_aq_desc *desc,
void *buff, /* can be NULL */
u16 buff_size,
struct i40e_asq_cmd_details *cmd_details)
{
enum i40e_status_code status = I40E_SUCCESS;
struct i40e_dma_mem *dma_buff = NULL;
struct i40e_asq_cmd_details *details;
struct i40e_aq_desc *desc_on_ring;
bool cmd_completed = false;
u16 retval = 0;
u32 val = 0;
i40e_acquire_spinlock(&hw->aq.asq_spinlock);
hw->aq.asq_last_status = I40E_AQ_RC_OK;
if (hw->aq.asq.count == 0) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: Admin queue not initialized.\n");
status = I40E_ERR_QUEUE_EMPTY;
goto asq_send_command_error;
}
val = rd32(hw, hw->aq.asq.head);
if (val >= hw->aq.num_asq_entries) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: head overrun at %d\n", val);
status = I40E_ERR_QUEUE_EMPTY;
goto asq_send_command_error;
}
details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
if (cmd_details) {
i40e_memcpy(details,
cmd_details,
sizeof(struct i40e_asq_cmd_details),
I40E_NONDMA_TO_NONDMA);
/* If the cmd_details are defined copy the cookie. The
* CPU_TO_LE32 is not needed here because the data is ignored
* by the FW, only used by the driver
*/
if (details->cookie) {
desc->cookie_high =
CPU_TO_LE32(I40E_HI_DWORD(details->cookie));
desc->cookie_low =
CPU_TO_LE32(I40E_LO_DWORD(details->cookie));
}
} else {
i40e_memset(details, 0,
sizeof(struct i40e_asq_cmd_details),
I40E_NONDMA_MEM);
}
/* clear requested flags and then set additional flags if defined */
desc->flags &= ~CPU_TO_LE16(details->flags_dis);
desc->flags |= CPU_TO_LE16(details->flags_ena);
if (buff_size > hw->aq.asq_buf_size) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Invalid buffer size: %d.\n",
buff_size);
status = I40E_ERR_INVALID_SIZE;
goto asq_send_command_error;
}
if (details->postpone && !details->async) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Async flag not set along with postpone flag");
status = I40E_ERR_PARAM;
goto asq_send_command_error;
}
/* call clean and check queue available function to reclaim the
* descriptors that were processed by FW, the function returns the
* number of desc available
*/
/* the clean function called here could be called in a separate thread
* in case of asynchronous completions
*/
if (i40e_clean_asq(hw) == 0) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Error queue is full.\n");
status = I40E_ERR_ADMIN_QUEUE_FULL;
goto asq_send_command_error;
}
/* initialize the temp desc pointer with the right desc */
desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
/* if the desc is available copy the temp desc to the right place */
i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc),
I40E_NONDMA_TO_DMA);
/* if buff is not NULL assume indirect command */
if (buff != NULL) {
dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
/* copy the user buff into the respective DMA buff */
i40e_memcpy(dma_buff->va, buff, buff_size,
I40E_NONDMA_TO_DMA);
desc_on_ring->datalen = CPU_TO_LE16(buff_size);
/* Update the address values in the desc with the pa value
* for respective buffer
*/
desc_on_ring->params.external.addr_high =
CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa));
desc_on_ring->params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa));
}
/* bump the tail */
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
buff, buff_size);
(hw->aq.asq.next_to_use)++;
if (hw->aq.asq.next_to_use == hw->aq.asq.count)
hw->aq.asq.next_to_use = 0;
if (!details->postpone)
wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
/* if cmd_details are not defined or async flag is not set,
* we need to wait for desc write back
*/
if (!details->async && !details->postpone) {
u32 total_delay = 0;
do {
/* AQ designers suggest use of head for better
* timing reliability than DD bit
*/
if (i40e_asq_done(hw))
break;
i40e_usec_delay(50);
total_delay += 50;
} while (total_delay < hw->aq.asq_cmd_timeout);
}
/* if ready, copy the desc back to temp */
if (i40e_asq_done(hw)) {
i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc),
I40E_DMA_TO_NONDMA);
if (buff != NULL)
i40e_memcpy(buff, dma_buff->va, buff_size,
I40E_DMA_TO_NONDMA);
retval = LE16_TO_CPU(desc->retval);
if (retval != 0) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Command completed with error 0x%X.\n",
retval);
/* strip off FW internal code */
retval &= 0xff;
}
cmd_completed = true;
if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
status = I40E_SUCCESS;
else if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_EBUSY)
status = I40E_ERR_NOT_READY;
else
status = I40E_ERR_ADMIN_QUEUE_ERROR;
hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
}
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: desc and buffer writeback:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);
/* save writeback aq if requested */
if (details->wb_desc)
i40e_memcpy(details->wb_desc, desc_on_ring,
sizeof(struct i40e_aq_desc), I40E_DMA_TO_NONDMA);
/* update the error if time out occurred */
if ((!cmd_completed) &&
(!details->async && !details->postpone)) {
#ifdef PF_DRIVER
if (rd32(hw, hw->aq.asq.len) & I40E_GL_ATQLEN_ATQCRIT_MASK) {
#else
if (rd32(hw, hw->aq.asq.len) & I40E_VF_ATQLEN1_ATQCRIT_MASK) {
#endif
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: AQ Critical error.\n");
status = I40E_ERR_ADMIN_QUEUE_CRITICAL_ERROR;
} else {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: Writeback timeout.\n");
status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
}
}
asq_send_command_error:
i40e_release_spinlock(&hw->aq.asq_spinlock);
return status;
}
/**
* i40e_fill_default_direct_cmd_desc - AQ descriptor helper function
* @desc: pointer to the temp descriptor (non DMA mem)
* @opcode: the opcode can be used to decide which flags to turn off or on
*
* Fill the desc with default values
**/
void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
u16 opcode)
{
/* zero out the desc */
i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc),
I40E_NONDMA_MEM);
desc->opcode = CPU_TO_LE16(opcode);
desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_SI);
}
/**
* i40e_asq_send_command - send command to Admin Queue
* @hw: pointer to the hw struct
* @desc: prefilled descriptor describing the command (non DMA mem)
* @buff: buffer to use for indirect commands
* @buff_size: size of buffer for indirect commands
* @cmd_details: pointer to command details structure
*
* This is the main send command driver routine for the Admin Queue send
* queue. It runs the queue, cleans the queue, etc
**/
enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw,
struct i40e_aq_desc *desc,
void *buff, /* can be NULL */
u16 buff_size,
struct i40e_asq_cmd_details *cmd_details)
{
#ifdef I40E_QV
struct i40e_aq_desc qv_desc = {0};
struct i40e_aq_desc *qv_desc_on_ring;
#endif /* I40E_QV */
enum i40e_status_code status = I40E_SUCCESS;
struct i40e_dma_mem *dma_buff = NULL;
struct i40e_asq_cmd_details *details;
struct i40e_aq_desc *desc_on_ring;
bool cmd_completed = FALSE;
u16 retval = 0;
u32 val = 0;
val = rd32(hw, hw->aq.asq.head);
if (val >= hw->aq.num_asq_entries) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: head overrun at %d\n", val);
status = I40E_ERR_QUEUE_EMPTY;
goto asq_send_command_exit;
}
if (hw->aq.asq.count == 0) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: Admin queue not initialized.\n");
status = I40E_ERR_QUEUE_EMPTY;
goto asq_send_command_exit;
}
if (i40e_is_nvm_update_op(desc) && hw->aq.nvm_busy) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: NVM busy.\n");
status = I40E_ERR_NVM;
goto asq_send_command_exit;
}
details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
if (cmd_details) {
i40e_memcpy(details,
cmd_details,
sizeof(struct i40e_asq_cmd_details),
I40E_NONDMA_TO_NONDMA);
/* If the cmd_details are defined copy the cookie. The
* CPU_TO_LE32 is not needed here because the data is ignored
* by the FW, only used by the driver
*/
if (details->cookie) {
desc->cookie_high =
CPU_TO_LE32(I40E_HI_DWORD(details->cookie));
desc->cookie_low =
CPU_TO_LE32(I40E_LO_DWORD(details->cookie));
}
} else {
i40e_memset(details, 0,
sizeof(struct i40e_asq_cmd_details),
I40E_NONDMA_MEM);
}
/* clear requested flags and then set additional flags if defined */
desc->flags &= ~CPU_TO_LE16(details->flags_dis);
desc->flags |= CPU_TO_LE16(details->flags_ena);
i40e_acquire_spinlock(&hw->aq.asq_spinlock);
if (buff_size > hw->aq.asq_buf_size) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Invalid buffer size: %d.\n",
buff_size);
status = I40E_ERR_INVALID_SIZE;
goto asq_send_command_error;
}
if (details->postpone && !details->async) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Async flag not set along with postpone flag");
status = I40E_ERR_PARAM;
goto asq_send_command_error;
}
/* call clean and check queue available function to reclaim the
* descriptors that were processed by FW, the function returns the
* number of desc available
*/
/* the clean function called here could be called in a separate thread
* in case of asynchronous completions
*/
if (i40e_clean_asq(hw) == 0) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Error queue is full.\n");
status = I40E_ERR_ADMIN_QUEUE_FULL;
goto asq_send_command_error;
}
/* initialize the temp desc pointer with the right desc */
desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
/* if the desc is available copy the temp desc to the right place */
i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc),
I40E_NONDMA_TO_DMA);
#ifdef I40E_QV
/* copy the descriptor from ring to userspace buffer */
i40e_memcpy(&qv_desc, desc_on_ring, sizeof(struct i40e_aq_desc),
I40E_DMA_TO_NONDMA);
qv_desc_on_ring = desc_on_ring;
desc_on_ring = &qv_desc;
#endif /* I40E_QV */
/* if buff is not NULL assume indirect command */
if (buff != NULL) {
dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
/* copy the user buff into the respective DMA buff */
i40e_memcpy(dma_buff->va, buff, buff_size,
I40E_NONDMA_TO_DMA);
desc_on_ring->datalen = CPU_TO_LE16(buff_size);
/* Update the address values in the desc with the pa value
* for respective buffer
*/
desc_on_ring->params.external.addr_high =
CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa));
desc_on_ring->params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa));
#ifdef I40E_QV
/* copy the descriptor from userspace buffer to ring */
i40e_memcpy(qv_desc_on_ring, desc_on_ring,
sizeof(struct i40e_aq_desc), I40E_NONDMA_TO_DMA);
#endif /* I40E_QV */
}
/* bump the tail */
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
buff, buff_size);
(hw->aq.asq.next_to_use)++;
if (hw->aq.asq.next_to_use == hw->aq.asq.count)
hw->aq.asq.next_to_use = 0;
if (!details->postpone)
wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
/* if cmd_details are not defined or async flag is not set,
* we need to wait for desc write back
*/
if (!details->async && !details->postpone) {
u32 total_delay = 0;
u32 delay_len = 10;
do {
#ifdef I40E_QV
/* copy the descriptor from ring to user buffer */
i40e_memcpy(desc_on_ring, qv_desc_on_ring,
sizeof(struct i40e_aq_desc), I40E_DMA_TO_NONDMA);
#endif /* I40E_QV */
/* AQ designers suggest use of head for better
* timing reliability than DD bit
*/
if (i40e_asq_done(hw))
break;
/* ugh! delay while spin_lock */
i40e_usec_delay(delay_len);
total_delay += delay_len;
} while (total_delay < hw->aq.asq_cmd_timeout);
}
/* if ready, copy the desc back to temp */
if (i40e_asq_done(hw)) {
#ifdef I40E_QV
/* Swap pointer back */
desc_on_ring = qv_desc_on_ring;
#endif /* I40E_QV */
i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc),
I40E_DMA_TO_NONDMA);
if (buff != NULL)
i40e_memcpy(buff, dma_buff->va, buff_size,
I40E_DMA_TO_NONDMA);
retval = LE16_TO_CPU(desc->retval);
if (retval != 0) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Command completed with error 0x%X.\n",
retval);
/* strip off FW internal code */
retval &= 0xff;
}
cmd_completed = TRUE;
if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
status = I40E_SUCCESS;
else
status = I40E_ERR_ADMIN_QUEUE_ERROR;
hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
}
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: desc and buffer writeback:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);
/* update the error if time out occurred */
if ((!cmd_completed) &&
(!details->async && !details->postpone)) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Writeback timeout.\n");
status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
}
if (!status && i40e_is_nvm_update_op(desc))
hw->aq.nvm_busy = TRUE;
asq_send_command_error:
i40e_release_spinlock(&hw->aq.asq_spinlock);
asq_send_command_exit:
return status;
}