/*
* Reset the rate control state for each 802.11 state transition.
*/
static void
ath_rate_newstate(struct ieee80211vap *vap, enum ieee80211_state state)
{
struct ieee80211com *ic = vap->iv_ic;
struct ath_softc *sc = ic->ic_dev->priv;
struct ieee80211_node *ni;
if (state == IEEE80211_S_INIT)
return;
if (vap->iv_opmode == IEEE80211_M_STA) {
/*
* Reset local xmit state; this is really only
* meaningful when operating in station mode.
*/
ni = vap->iv_bss;
if (state == IEEE80211_S_RUN) {
ath_rate_ctl_start(sc, ni);
} else {
ath_rate_update(sc, ni, 0);
}
} else {
/*
* When operating as a station the node table holds
* the AP's that were discovered during scanning.
* For any other operating mode we want to reset the
* tx rate state of each node.
*/
ieee80211_iterate_nodes(&ic->ic_sta, ath_rate_cb, NULL);
ath_rate_update(sc, vap->iv_bss, 0);
}
}
/*
* Reset the rate control state for each 802.11 state transition.
*/
void
ath_rate_newstate(struct ath_softc *sc, enum ieee80211_state state)
{
struct ieee80211com *ic = &sc->sc_ic;
if (state == IEEE80211_S_RUN) {
if (ic->ic_opmode != IEEE80211_M_STA) {
/*
* Sync rates for associated stations and neighbors.
*/
ieee80211_iterate_nodes(&ic->ic_sta, rate_cb, sc);
}
ath_rate_newassoc(sc, ATH_NODE(ic->ic_bss), 1);
}
}
/*
* Reset the rate control state for each 802.11 state transition.
*/
void
ath_rate_newstate(struct ath_softc *sc, enum ieee80211_state state)
{
struct onoe_softc *osc = (struct onoe_softc *) sc->sc_rc;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni;
if (state == IEEE80211_S_INIT) {
callout_stop(&osc->timer);
return;
}
if (ic->ic_opmode == IEEE80211_M_STA) {
/*
* Reset local xmit state; this is really only
* meaningful when operating in station mode.
*/
ni = ic->ic_bss;
if (state == IEEE80211_S_RUN) {
ath_rate_ctl_start(sc, ni);
} else {
ath_rate_update(sc, ni, 0);
}
} else {
/*
* When operating as a station the node table holds
* the AP's that were discovered during scanning.
* For any other operating mode we want to reset the
* tx rate state of each node.
*/
ieee80211_iterate_nodes(&ic->ic_sta, ath_rate_cb, sc);
ath_rate_update(sc, ic->ic_bss, 0);
}
if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE &&
state == IEEE80211_S_RUN) {
int interval;
/*
* Start the background rate control thread if we
* are not configured to use a fixed xmit rate.
*/
interval = ath_rateinterval;
if (ic->ic_opmode == IEEE80211_M_STA)
interval /= 2;
callout_reset(&osc->timer, (interval * hz) / 1000,
ath_ratectl, &sc->sc_if);
}
}
static void
ath_ratectl(void *arg)
{
struct ifnet *ifp = arg;
struct ath_softc *sc = ifp->if_softc;
struct onoe_softc *osc = (struct onoe_softc *) sc->sc_rc;
struct ieee80211com *ic = &sc->sc_ic;
int interval;
if (ifp->if_flags & IFF_RUNNING) {
sc->sc_stats.ast_rate_calls++;
if (ic->ic_opmode == IEEE80211_M_STA)
ath_rate_ctl(sc, ic->ic_bss); /* NB: no reference */
else
ieee80211_iterate_nodes(&ic->ic_sta, ath_rate_ctl, sc);
}
interval = ath_rateinterval;
if (ic->ic_opmode == IEEE80211_M_STA)
interval /= 2;
callout_reset(&osc->timer, (interval * hz) / 1000,
ath_ratectl, &sc->sc_if);
}
static void
ath_ratectl(unsigned long data)
{
struct net_device *dev = (struct net_device *)data;
struct ath_softc *sc = dev->priv;
struct amrr_softc *asc = (struct amrr_softc *) sc->sc_rc;
struct ieee80211com *ic = &sc->sc_ic;
int interval;
if (dev->flags & IFF_RUNNING) {
sc->sc_stats.ast_rate_calls++;
if (ic->ic_opmode == IEEE80211_M_STA)
ath_rate_ctl(sc, ic->ic_bss); /* NB: no reference */
else
ieee80211_iterate_nodes(ic, ath_rate_ctl, sc);
}
interval = ath_rateinterval;
if (ic->ic_opmode == IEEE80211_M_STA)
interval /= 2;
asc->timer.expires = jiffies + ((HZ * interval) / 1000);
add_timer(&asc->timer);
}
/*
* TDMA state machine handler.
*/
static int
tdma_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211_tdma_state *ts = vap->iv_tdma;
struct ieee80211com *ic = vap->iv_ic;
enum ieee80211_state ostate;
int status;
IEEE80211_LOCK_ASSERT(ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
if (vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS)
callout_stop(&vap->iv_swbmiss);
if (nstate == IEEE80211_S_SCAN &&
(ostate == IEEE80211_S_INIT || ostate == IEEE80211_S_RUN) &&
ts->tdma_slot != 0) {
/*
* Override adhoc behaviour when operating as a slave;
* we need to scan even if the channel is locked.
*/
vap->iv_state = nstate; /* state transition */
ieee80211_cancel_scan(vap); /* background scan */
if (ostate == IEEE80211_S_RUN) {
/* purge station table; entries are stale */
ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap);
}
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
status = 0;
} else {
status = ts->tdma_newstate(vap, nstate, arg);
}
if (status == 0 &&
nstate == IEEE80211_S_RUN && ostate != IEEE80211_S_RUN &&
(vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS) &&
ts->tdma_slot != 0 &&
vap->iv_des_chan == IEEE80211_CHAN_ANYC) {
/*
* Start s/w beacon miss timer for slave devices w/o
* hardware support. Note we do this only if we're
* not locked to a channel (i.e. roam to follow the
* master). The 2x is a fudge for our doing this in
* software.
*/
vap->iv_swbmiss_period = IEEE80211_TU_TO_TICKS(
2 * vap->iv_bmissthreshold * ts->tdma_bintval *
((ts->tdma_slotcnt * ts->tdma_slotlen) / 1024));
vap->iv_swbmiss_count = 0;
callout_reset(&vap->iv_swbmiss, vap->iv_swbmiss_period,
ieee80211_swbmiss, vap);
}
return status;
}
/*
* IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler.
*/
static int
adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(vap->iv_ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
if (ostate != IEEE80211_S_SCAN)
ieee80211_cancel_scan(vap); /* background scan */
ni = vap->iv_bss; /* NB: no reference held */
switch (nstate) {
case IEEE80211_S_INIT:
switch (ostate) {
case IEEE80211_S_SCAN:
ieee80211_cancel_scan(vap);
break;
default:
break;
}
if (ostate != IEEE80211_S_INIT) {
/* NB: optimize INIT -> INIT case */
ieee80211_reset_bss(vap);
}
break;
case IEEE80211_S_SCAN:
switch (ostate) {
case IEEE80211_S_RUN: /* beacon miss */
/* purge station table; entries are stale */
ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap);
/* fall thru... */
case IEEE80211_S_INIT:
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) {
/*
* Already have a channel; bypass the
* scan and startup immediately.
*/
ieee80211_create_ibss(vap,
ieee80211_ht_adjust_channel(ic,
vap->iv_des_chan, vap->iv_flags_ht));
break;
}
/*
* Initiate a scan. We can come here as a result
* of an IEEE80211_IOC_SCAN_REQ too in which case
* the vap will be marked with IEEE80211_FEXT_SCANREQ
* and the scan request parameters will be present
* in iv_scanreq. Otherwise we do the default.
*/
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
break;
case IEEE80211_S_SCAN:
/*
* This can happen because of a change in state
* that requires a reset. Trigger a new scan
* unless we're in manual roaming mode in which
* case an application must issue an explicit request.
*/
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
default:
goto invalid;
}
break;
case IEEE80211_S_RUN:
if (vap->iv_flags & IEEE80211_F_WPA) {
/* XXX validate prerequisites */
}
switch (ostate) {
case IEEE80211_S_SCAN:
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_debug(vap)) {
ieee80211_note(vap,
"synchronized with %s ssid ",
ether_sprintf(ni->ni_bssid));
ieee80211_print_essid(vap->iv_bss->ni_essid,
ni->ni_esslen);
/* XXX MCS/HT */
printf(" channel %d start %uMb\n",
ieee80211_chan2ieee(ic, ic->ic_curchan),
IEEE80211_RATE2MBS(ni->ni_txrate));
}
#endif
break;
case IEEE80211_S_RUN: /* IBSS merge */
break;
default:
goto invalid;
}
/*
* When 802.1x is not in use mark the port authorized
* at this point so traffic can flow.
*/
if (ni->ni_authmode != IEEE80211_AUTH_8021X)
ieee80211_node_authorize(ni);
/*
* Fake association when joining an existing bss.
*/
if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) &&
ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN);
break;
case IEEE80211_S_SLEEP:
vap->iv_sta_ps(vap, 0);
break;
default:
invalid:
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
"%s: unexpected state transition %s -> %s\n", __func__,
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
break;
}
return 0;
}
