int do_irq(unsigned r0, unsigned r1, unsigned r2, unsigned r3)
{
int vec;
int intno;
int timerctrl;
vec = in_w(HW_ICOLL_VECTOR);
out_w(HW_ICOLL_VECTOR, 0);
intno = in_w(HW_ICOLL_STAT);
putchar('\n');
printk("CPSR(irq): %X\n", r0);
printk("CPSR(blx): %X\n", r1);
printk("irq no: %d\n", intno);
printk("vecisr: %x\n", vec);
timerctrl = in_w(HW_TIMROT_TIMCTRL1);
printk("timer-ctrl: %016b\n", timerctrl);
out_w(HW_TIMROT_TIMCTRL1, timerctrl);
out_w(HW_TIMROT_TIMCTRL1_CLR, 1<<15);
out_w(HW_ICOLL_LEVELACK, 0x1);
// out_w(HW_ICOLL_LEVELACK, 0x2);
// out_w(HW_ICOLL_LEVELACK, 0x4);
// out_w(HW_ICOLL_LEVELACK, 0x8);
}
int do_fiq(int r0, int r1, int r2, int r3)
{
static int rand = 0;
int vec;
rand++;
void (*isr)();
isr = (void *)in_w(0x80000000);
printk("isr:%d\n", isr);
printk("lr:[%x]\n", r0);
vec = in_w(0x80000070);
printk("irq line: [%d]\n", vec);
out_w(0x80000010, 0x1);
printk("levelack!\n");
return 0;
}
int hw_icoll_raw(int irq)
{
int irq_raw[4];
irq_raw[0] = in_w(HW_ICOLL_RAW0);
irq_raw[1] = in_w(HW_ICOLL_RAW1);
irq_raw[2] = in_w(HW_ICOLL_RAW2);
irq_raw[3] = in_w(HW_ICOLL_RAW3);
return irq_raw[irq/32] & (1 << (irq%32));
}
void sio_recv_frame(unsigned char *buf, int size)
{
while (size > 0) {
/* Wait until there is data in the FIFO */
while (in_w(PL011_STAT) & 0x00000010U) {
/* NOP */
}
*buf = (unsigned char)in_w(PL011_IO);
++buf;
--size;
}
}
ACPI_STATUS
AcpiOsReadPort (
ACPI_IO_ADDRESS Address,
UINT32 *Value,
UINT32 Width)
{
switch (Width) {
case 8:
*Value = in_b((uint16_t)Address);
break;
case 16:
*Value = in_h((uint16_t)Address);
break;
case 32:
*Value = in_w((uint16_t)Address);
break;
default:
return (AE_BAD_PARAMETER);
}
return (AE_OK);
}
/*
* Memory block inputs (32 bit) cnt : number of words
*/
EXPORT void InMemW(UW iob, W ix, UW *buf, W cnt)
{
UW port = iob + (ix * IOSTEP);
while (--cnt >= 0) {
*buf++ = in_w(port);
}
}
/* wait for data of SPI for PMIC communication */
LOCAL void pmicWait(void)
{
W i;
for (i = 1000000; i > 0; i--) {
if (in_w(SPn_RAW_STATUS(SP0)) & 0x0004) break;
waitUsec(1);
}
if (!i) pmicInit();
return;
}
void sio_send_frame(unsigned char const *buf, int size)
{
while (size > 0) {
/* Wait until there is space in the FIFO */
while (in_w(PL011_STAT) & 0x00000020U) {
/* NOP */
}
out_w(PL011_IO, *buf);
++buf;
--size;
}
}
/*
I/O read
*/
EXPORT W readIO(UW addr, UW *data, W unit)
{
W n;
UW pa;
/* address misalignment is reported as error */
if (addr & (unit - 1)) return 0;
/* I/O address check & conversion to physical address */
n = chkIOAddr(addr, &pa, unit);
if (n < unit) return 0;
switch(unit) {
case 4: *data = in_w(pa); break;
case 2: *data = in_h(pa); break;
default: *data = in_b(pa);
}
return unit;
}
/* read PMIC register */
EXPORT W pmicRead(W reg)
{
W dat;
pmicCSassert(TRUE); /* CS assert */
out_w(SPn_FFCLR(SP0), ~0); /* status flag is cleared */
out_w(SPn_TX_DATA(SP0), (reg << 1) | 1); /* send register number */
out_w(SPn_CONTROL(SP0), 0x0009); /* send start */
pmicWait();
out_w(SPn_FFCLR(SP0), ~0); /* status flag is cleared */
out_w(SPn_CONTROL(SP0), 0x0005); /* start receive */
pmicWait();
dat = in_w(SPn_RX_DATA(SP0)); /* data received */
pmicCSassert(FALSE); /* CS de-assert */
return dat;
}
/** Function 01h - Return VBE Mode Information
*
* Input:
* AX = 4F01h
* CX = Mode Number
* ES:DI = Pointer to buffer in which to place ModeInfoBlock structure
* Output:
* AX = VBE Return Status
*
*/
void vbe_biosfn_return_mode_information(uint16_t STACK_BASED *AX, uint16_t CX, uint16_t ES, uint16_t DI)
{
uint16_t result = 0x0100;
#ifdef VBE_NEW_DYN_LIST
uint16_t cur_info_ofs;
#else
ModeInfoListItem *cur_info;
#endif
Boolean using_lfb;
uint8_t win_attr;
#ifdef VGA_DEBUG
printf("VBE vbe_biosfn_return_mode_information ES%x DI%x CX%x\n",ES,DI,CX);
#endif
using_lfb = ((CX & VBE_MODE_LINEAR_FRAME_BUFFER) == VBE_MODE_LINEAR_FRAME_BUFFER);
CX = (CX & 0x1ff);
#ifdef VBE_NEW_DYN_LIST
cur_info_ofs = mode_info_find_mode(CX, using_lfb);
if (cur_info_ofs) {
uint16_t i;
#else
cur_info = mode_info_find_mode(CX, using_lfb);
if (cur_info != 0) {
#endif
#ifdef VGA_DEBUG
printf("VBE found mode %x\n",CX);
#endif
memsetb(ES, DI, 0, 256); // The mode info size is fixed
#ifdef VBE_NEW_DYN_LIST
for (i = 0; i < sizeof(ModeInfoBlockCompact); i++) {
uint8_t b;
b = in_byte(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info) + i/*(char *)(&(cur_info->info)) + i*/);
write_byte(ES, DI + i, b);
}
#else
memcpyb(ES, DI, 0xc000, &(cur_info->info), sizeof(ModeInfoBlockCompact));
#endif
win_attr = read_byte(ES, DI + offsetof(ModeInfoBlock, WinAAttributes));
if (win_attr & VBE_WINDOW_ATTRIBUTE_RELOCATABLE) {
write_word(ES, DI + offsetof(ModeInfoBlock, WinFuncPtr), (uint16_t)(dispi_set_bank_farcall));
// If BIOS not at 0xC000 -> boom
write_word(ES, DI + offsetof(ModeInfoBlock, WinFuncPtr) + 2, 0xC000);
}
// Update the LFB physical address which may change at runtime
out_w(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_FB_BASE_HI);
write_word(ES, DI + offsetof(ModeInfoBlock, PhysBasePtr) + 2, in_w(VBE_DISPI_IOPORT_DATA));
result = 0x4f;
} else {
#ifdef VGA_DEBUG
printf("VBE *NOT* found mode %x\n",CX);
#endif
result = 0x100;
}
*AX = result;
}
/** Function 02h - Set VBE Mode
*
* Input:
* AX = 4F02h
* BX = Desired Mode to set
* ES:DI = Pointer to CRTCInfoBlock structure
* Output:
* AX = VBE Return Status
*
*/
void vbe_biosfn_set_mode(uint16_t STACK_BASED *AX, uint16_t BX, uint16_t ES, uint16_t DI)
{
uint16_t result;
#ifdef VBE_NEW_DYN_LIST
uint16_t cur_info_ofs;
#else
ModeInfoListItem *cur_info;
#endif
Boolean using_lfb;
uint8_t no_clear;
uint8_t lfb_flag;
using_lfb = ((BX & VBE_MODE_LINEAR_FRAME_BUFFER) == VBE_MODE_LINEAR_FRAME_BUFFER);
lfb_flag = using_lfb ? VBE_DISPI_LFB_ENABLED : 0;
no_clear = ((BX & VBE_MODE_PRESERVE_DISPLAY_MEMORY) == VBE_MODE_PRESERVE_DISPLAY_MEMORY) ? VBE_DISPI_NOCLEARMEM : 0;
BX = (BX & 0x1ff);
// check for non vesa mode
if (BX < VBE_MODE_VESA_DEFINED)
{
uint8_t mode;
dispi_set_enable(VBE_DISPI_DISABLED);
// call the vgabios in order to set the video mode
// this allows for going back to textmode with a VBE call (some applications expect that to work)
mode = (BX & 0xff);
biosfn_set_video_mode(mode);
result = 0x4f;
goto leave;
}
#ifdef VBE_NEW_DYN_LIST
cur_info_ofs = mode_info_find_mode(BX, using_lfb);
if (cur_info_ofs != 0)
{
uint16_t xres, yres;
uint8_t bpp;
xres = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.XResolution) /*&cur_info->info.XResolution*/);
yres = in_word(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.YResolution) /*&cur_info->info.YResolution*/);
bpp = in_byte(VBE_EXTRA_PORT, cur_info_ofs + offsetof(ModeInfoListItem, info.BitsPerPixel) /*&cur_info->info.BitsPerPixel*/);
#ifdef VGA_DEBUG
printf("VBE found mode %x, setting:\n", BX);
printf("\txres%x yres%x bpp%x\n", xres, yres, bpp);
#endif
#else
cur_info = mode_info_find_mode(BX, using_lfb);
if (cur_info != 0)
{
#ifdef VGA_DEBUG
printf("VBE found mode %x, setting:\n", BX);
printf("\txres%x yres%x bpp%x\n",
cur_info->info.XResolution,
cur_info->info.YResolution,
cur_info->info.BitsPerPixel);
#endif
#endif // VBE_NEW_DYN_LIST
// first disable current mode (when switching between vesa modi)
dispi_set_enable(VBE_DISPI_DISABLED);
#ifdef VBE_NEW_DYN_LIST
if (bpp == 4)
#else
if (cur_info->info.BitsPerPixel == 4)
#endif
{
biosfn_set_video_mode(0x6a);
}
#ifdef VBE_NEW_DYN_LIST
dispi_set_bpp(bpp);
dispi_set_xres(xres);
dispi_set_yres(yres);
#else
dispi_set_bpp(cur_info->info.BitsPerPixel);
dispi_set_xres(cur_info->info.XResolution);
dispi_set_yres(cur_info->info.YResolution);
#endif
dispi_set_bank(0);
dispi_set_enable(VBE_DISPI_ENABLED | no_clear | lfb_flag);
vga_compat_setup();
write_word(BIOSMEM_SEG,BIOSMEM_VBE_MODE,BX);
write_byte(BIOSMEM_SEG,BIOSMEM_VIDEO_CTL,(0x60 | no_clear));
result = 0x4f;
}
else
{
#ifdef VGA_DEBUG
printf("VBE *NOT* found mode %x\n" , BX);
#endif
result = 0x100;
}
leave:
*AX = result;
}
uint16_t vbe_biosfn_read_video_state_size(void)
{
return 9 * 2;
}
void vbe_biosfn_save_video_state(uint16_t ES, uint16_t BX)
{
uint16_t enable, i;
outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
enable = inw(VBE_DISPI_IOPORT_DATA);
write_word(ES, BX, enable);
BX += 2;
if (!(enable & VBE_DISPI_ENABLED))
return;
for(i = VBE_DISPI_INDEX_XRES; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) {
if (i != VBE_DISPI_INDEX_ENABLE) {
outw(VBE_DISPI_IOPORT_INDEX, i);
write_word(ES, BX, inw(VBE_DISPI_IOPORT_DATA));
BX += 2;
}
}
}
void start_timer(unsigned r0, unsigned r1, unsigned r2, unsigned r3)
{
int val;
int i;
#define BIT(n) (1<<n)
#define BITTST(val, n) ((val) & BIT(n))
#define TST(val, b) ((val) & (b))
hw_timer_rotary[0] = (void *)(0x80068000); /* have ROTCTRL */
hw_timer_rotary[1] = (void *)(0x80068050);
hw_timer_rotary[2] = (void *)(0x80068080);
hw_timer_rotary[3] = (void *)(0x800680C0);
val = hw_timer_rotary[0]->HW_TIMROT_ROTCTRL[0];
printk("This SoC has:\n");
if(BITTST(val,25)) printk("timer 0\n");
if(BITTST(val,26)) printk("timer 1\n");
if(BITTST(val,27)) printk("timer 2\n");
if(BITTST(val,28)) printk("timer 3\n");
#define IRQ (1<<15)
#define IRQ_EN (1<<14)
#define MATCH_MODE (1<<11)
#define POLARITY (1<<8)
#define UPDATE (1<<7)
#define RELOAD (1<<6)
#define PRESCALE(n) ((n)<<4)
#define DIV_BY_8 (0x3)
#define SELECT(n) ((n)<<0)
#define TICK_ALWAYS (0XF)
#define SET 1
#define CLR 2
#define TOG 3
hw_timer_rotary[1]->HW_TIMROT_FIXED_COUNT[0] = 0x00011000;
val = IRQ_EN | UPDATE | RELOAD | PRESCALE(TICK_ALWAYS) | SELECT(0xB);
out_w(HW_TIMROT_TIMCTRL1, val);
while(1){
static int random = 0;
random++;
printk("[%04d]wait timer1 irq\n", random);
waitMsec(100);
val = hw_timer_rotary[1]->HW_TIMROT_TIMCTRL[0];
printk("%016b\n", val);
val = in_w(HW_TIMROT_RUNNING_COUNT1);
printk("timer running @[0x%x]\n", val);
val = in_w(HW_TIMROT_VERSION);
printk("timer version @[%X]\n", val);
if(random>300) break;
}
printk("Goodbye TIMER!\n");
}
/*
* Interrupt handler definition
*/
SYSCALL ER _tk_def_int( UINT dintno, T_DINT *pk_dint )
{
FP inthdr;
INT vecno = dintno >> 5;
INTMASKTBL *ptr;
CHECK_PAR(vecno < MAX_INTVEC);
if ( pk_dint != NULL ) {
/* Set interrupt handler */
if ( vecno == VECNO_TLBMISS ) {
CHECK_RSATR(pk_dint->intatr, 0);
} else {
CHECK_RSATR(pk_dint->intatr, TA_HLNG | TA_ASSPRC);
}
#if CHK_PAR
if ( (pk_dint->intatr & TA_ASSPRC) != 0 ) {
if ( !chk_assprc(pk_dint->assprc) ) {
return E_PAR;
}
}
#endif
inthdr = pk_dint->inthdr;
BEGIN_CRITICAL_SECTION;
if ( (pk_dint->intatr & TA_HLNG) != 0 ) {
hll_inthdr[vecno] = inthdr;
inthdr = ( vecno == VECNO_DEFAULT )?
defaulthdr_startup: inthdr_startup;
}
define_inthdr(vecno, inthdr);
if ( (pk_dint->intatr & TA_ASSPRC) != 0 ) {
if ( vecno < N_INTVEC) {
ptr = &intmasktable[vecno];
if ( ptr->mask != 0) {
if ( pk_dint->assprc & TP_PRC1 ) {
out_w(ptr->maskaddr[1], in_w(ptr->maskaddr[1]) | ptr->mask);
out_w(clraddr(ptr->maskaddr[0]), ptr->mask);
}
else if ( pk_dint->assprc & TP_PRC2 ) {
out_w(ptr->maskaddr[0], in_w(ptr->maskaddr[0]) | ptr->mask);
out_w(clraddr(ptr->maskaddr[1]), ptr->mask);
}
}
}
}
END_CRITICAL_NO_DISPATCH;
} else {
/* Free interrupt handler */
switch ( vecno ) {
case VECNO_TRAPA: inthdr = SaveMonHdr.trapa_hdr; break;
case VECNO_BREAK: inthdr = SaveMonHdr.break_hdr; break;
case VECNO_MONITOR: inthdr = SaveMonHdr.monitor_hdr; break;
case VECNO_DEFAULT: inthdr = SaveMonHdr.default_hdr; break;
case VECNO_TLBMISS: inthdr = SaveMonHdr.tlbmiss_hdr; break;
default: inthdr = NULL;
}
BEGIN_CRITICAL_SECTION;
define_inthdr(vecno, inthdr);
if ( vecno < MAX_INTVEC ) {
hll_inthdr[vecno] = NULL;
}
if ( vecno < N_INTVEC) {
ptr = &intmasktable[vecno];
if ( ptr->mask != 0) {
out_w(ptr->maskaddr[0], in_w(ptr->maskaddr[0]) | ptr->mask);
out_w(ptr->maskaddr[1], in_w(ptr->maskaddr[1]) | ptr->mask);
}
}
END_CRITICAL_NO_DISPATCH;
}
return E_OK;
}
