void
initializecpu(void)
{
switch (cpu) {
#ifdef I486_CPU
case CPU_BLUE:
init_bluelightning();
break;
case CPU_486DLC:
init_486dlc();
break;
case CPU_CY486DX:
init_cy486dx();
break;
case CPU_M1SC:
init_5x86();
break;
#ifdef CPU_I486_ON_386
case CPU_486:
init_i486_on_386();
break;
#endif
case CPU_M1:
init_6x86();
break;
#endif /* I486_CPU */
#ifdef I586_CPU
case CPU_586:
switch (cpu_vendor_id) {
case CPU_VENDOR_AMD:
#ifdef CPU_WT_ALLOC
if (((cpu_id & 0x0f0) > 0) &&
((cpu_id & 0x0f0) < 0x60) &&
((cpu_id & 0x00f) > 3))
enable_K5_wt_alloc();
else if (((cpu_id & 0x0f0) > 0x80) ||
(((cpu_id & 0x0f0) == 0x80) &&
(cpu_id & 0x00f) > 0x07))
enable_K6_2_wt_alloc();
else if ((cpu_id & 0x0f0) > 0x50)
enable_K6_wt_alloc();
#endif
if ((cpu_id & 0xf0) == 0xa0)
/*
* Make sure the TSC runs through
* suspension, otherwise we can't use
* it as timecounter
*/
wrmsr(0x1900, rdmsr(0x1900) | 0x20ULL);
break;
case CPU_VENDOR_CENTAUR:
init_winchip();
break;
case CPU_VENDOR_TRANSMETA:
init_transmeta();
break;
case CPU_VENDOR_RISE:
init_rise();
break;
}
break;
#endif
#ifdef I686_CPU
case CPU_M2:
init_6x86MX();
break;
case CPU_686:
switch (cpu_vendor_id) {
case CPU_VENDOR_INTEL:
switch (cpu_id & 0xff0) {
case 0x610:
init_ppro();
break;
case 0x660:
init_mendocino();
break;
}
break;
#ifdef CPU_ATHLON_SSE_HACK
case CPU_VENDOR_AMD:
/*
* Sometimes the BIOS doesn't enable SSE instructions.
* According to AMD document 20734, the mobile
* Duron, the (mobile) Athlon 4 and the Athlon MP
* support SSE. These correspond to cpu_id 0x66X
* or 0x67X.
*/
if ((cpu_feature & CPUID_XMM) == 0 &&
((cpu_id & ~0xf) == 0x660 ||
(cpu_id & ~0xf) == 0x670 ||
(cpu_id & ~0xf) == 0x680)) {
u_int regs[4];
wrmsr(MSR_HWCR, rdmsr(MSR_HWCR) & ~0x08000);
do_cpuid(1, regs);
cpu_feature = regs[3];
}
break;
#endif
case CPU_VENDOR_CENTAUR:
init_via();
break;
case CPU_VENDOR_TRANSMETA:
init_transmeta();
break;
}
#if defined(PAE) || defined(PAE_TABLES)
if ((amd_feature & AMDID_NX) != 0) {
uint64_t msr;
msr = rdmsr(MSR_EFER) | EFER_NXE;
wrmsr(MSR_EFER, msr);
pg_nx = PG_NX;
elf32_nxstack = 1;
}
#endif
break;
#endif
default:
break;
}
#if defined(CPU_ENABLE_SSE)
if ((cpu_feature & CPUID_XMM) && (cpu_feature & CPUID_FXSR)) {
load_cr4(rcr4() | CR4_FXSR | CR4_XMM);
cpu_fxsr = hw_instruction_sse = 1;
}
#endif
}
void
initializecpu(void)
{
switch (cpu) {
#ifdef I486_CPU
case CPU_BLUE:
init_bluelightning();
break;
case CPU_486DLC:
init_486dlc();
break;
case CPU_CY486DX:
init_cy486dx();
break;
case CPU_M1SC:
init_5x86();
break;
#ifdef CPU_I486_ON_386
case CPU_486:
init_i486_on_386();
break;
#endif
case CPU_M1:
init_6x86();
break;
#endif /* I486_CPU */
#ifdef I686_CPU
case CPU_M2:
init_6x86MX();
break;
case CPU_686:
if (cpu_vendor_id == CPU_VENDOR_INTEL) {
switch (cpu_id & 0xff0) {
case 0x610:
init_ppro();
break;
case 0x660:
init_mendocino();
break;
}
} else if (cpu_vendor_id == CPU_VENDOR_AMD) {
#if defined(I686_CPU) && defined(CPU_ATHLON_SSE_HACK)
/*
* Sometimes the BIOS doesn't enable SSE instructions.
* According to AMD document 20734, the mobile
* Duron, the (mobile) Athlon 4 and the Athlon MP
* support SSE. These correspond to cpu_id 0x66X
* or 0x67X.
*/
if ((cpu_feature & CPUID_XMM) == 0 &&
((cpu_id & ~0xf) == 0x660 ||
(cpu_id & ~0xf) == 0x670 ||
(cpu_id & ~0xf) == 0x680)) {
u_int regs[4];
wrmsr(0xC0010015, rdmsr(0xC0010015) & ~0x08000);
do_cpuid(1, regs);
cpu_feature = regs[3];
}
#endif
} else if (cpu_vendor_id == CPU_VENDOR_CENTAUR) {
switch (cpu_id & 0xff0) {
case 0x690:
if ((cpu_id & 0xf) < 3)
break;
/* fall through. */
case 0x6a0:
case 0x6d0:
case 0x6f0:
init_via();
break;
default:
break;
}
}
#ifdef PAE
if ((amd_feature & AMDID_NX) != 0) {
uint64_t msr;
msr = rdmsr(MSR_EFER) | EFER_NXE;
wrmsr(MSR_EFER, msr);
pg_nx = PG_NX;
}
#endif
break;
#endif
default:
break;
}
enable_sse();
/*
* CPUID with %eax = 1, %ebx returns
* Bits 15-8: CLFLUSH line size
* (Value * 8 = cache line size in bytes)
*/
if ((cpu_feature & CPUID_CLFSH) != 0)
cpu_clflush_line_size = ((cpu_procinfo >> 8) & 0xff) * 8;
/*
* XXXKIB: (temporary) hack to work around traps generated when
* CLFLUSHing APIC registers window.
*/
TUNABLE_INT_FETCH("hw.clflush_disable", &hw_clflush_disable);
if (cpu_vendor_id == CPU_VENDOR_INTEL && !(cpu_feature & CPUID_SS) &&
hw_clflush_disable == -1)
cpu_feature &= ~CPUID_CLFSH;
/*
* Allow to disable CLFLUSH feature manually by
* hw.clflush_disable tunable. This may help Xen guest on some AMD
* CPUs.
*/
if (hw_clflush_disable == 1)
cpu_feature &= ~CPUID_CLFSH;
#if defined(PC98) && !defined(CPU_UPGRADE_HW_CACHE)
/*
* OS should flush L1 cache by itself because no PC-98 supports
* non-Intel CPUs. Use wbinvd instruction before DMA transfer
* when need_pre_dma_flush = 1, use invd instruction after DMA
* transfer when need_post_dma_flush = 1. If your CPU upgrade
* product supports hardware cache control, you can add the
* CPU_UPGRADE_HW_CACHE option in your kernel configuration file.
* This option eliminates unneeded cache flush instruction(s).
*/
if (cpu_vendor_id == CPU_VENDOR_CYRIX) {
switch (cpu) {
#ifdef I486_CPU
case CPU_486DLC:
need_post_dma_flush = 1;
break;
case CPU_M1SC:
need_pre_dma_flush = 1;
break;
case CPU_CY486DX:
need_pre_dma_flush = 1;
#ifdef CPU_I486_ON_386
need_post_dma_flush = 1;
#endif
break;
#endif
default:
break;
}
} else if (cpu_vendor_id == CPU_VENDOR_AMD) {
switch (cpu_id & 0xFF0) {
case 0x470: /* Enhanced Am486DX2 WB */
case 0x490: /* Enhanced Am486DX4 WB */
case 0x4F0: /* Am5x86 WB */
need_pre_dma_flush = 1;
break;
}
} else if (cpu_vendor_id == CPU_VENDOR_IBM) {
need_post_dma_flush = 1;
} else {
#ifdef CPU_I486_ON_386
need_pre_dma_flush = 1;
#endif
}
#endif /* PC98 && !CPU_UPGRADE_HW_CACHE */
}
void
initializecpu(void)
{
switch (cpu) {
#ifdef I486_CPU
case CPU_BLUE:
init_bluelightning();
break;
case CPU_486DLC:
init_486dlc();
break;
case CPU_CY486DX:
init_cy486dx();
break;
case CPU_M1SC:
init_5x86();
break;
#ifdef CPU_I486_ON_386
case CPU_486:
init_i486_on_386();
break;
#endif
case CPU_M1:
init_6x86();
break;
#endif /* I486_CPU */
#ifdef I686_CPU
case CPU_M2:
init_6x86MX();
break;
case CPU_686:
if (cpu_vendor_id == CPU_VENDOR_INTEL) {
switch (cpu_id & 0xff0) {
case 0x610:
init_ppro();
break;
case 0x660:
init_mendocino();
break;
}
} else if (cpu_vendor_id == CPU_VENDOR_AMD) {
init_686_amd();
} else if (cpu_vendor_id == CPU_VENDOR_CENTAUR) {
switch (cpu_id & 0xff0) {
case 0x690:
if ((cpu_id & 0xf) < 3)
break;
/* fall through. */
case 0x6a0:
case 0x6d0:
case 0x6f0:
init_via();
break;
default:
break;
}
}
break;
#endif
default:
break;
}
enable_sse();
}