/*
* Acquire device for writing. We permit multiple writers.
* If this is the first one, we read the label.
*
* Returns: NULL if failed for any reason
* dcr if successful.
* Note, normally reserve_device_for_append() is called
* before this routine.
*/
DCR *acquire_device_for_append(DCR *dcr)
{
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
bool ok = false;
bool have_vol = false;
Enter(200);
init_device_wait_timers(dcr);
dev->Lock_acquire(); /* only one job at a time */
dev->Lock();
Dmsg1(100, "acquire_append device is %s\n", dev->is_tape() ? "tape" : "disk");
/*
* With the reservation system, this should not happen
*/
if (dev->can_read()) {
Jmsg1(jcr, M_FATAL, 0, _("Want to append, but device %s is busy reading.\n"), dev->print_name());
Dmsg1(200, "Want to append but device %s is busy reading.\n", dev->print_name());
goto get_out;
}
dev->clear_unload();
/*
* have_vol defines whether or not mount_next_write_volume should
* ask the Director again about what Volume to use.
*/
if (dev->can_append() && dcr->is_suitable_volume_mounted() &&
!bstrcmp(dcr->VolCatInfo.VolCatStatus, "Recycle")) {
Dmsg0(190, "device already in append.\n");
/*
* At this point, the correct tape is already mounted, so
* we do not need to do mount_next_write_volume(), unless
* we need to recycle the tape.
*/
if (dev->num_writers == 0) {
dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
}
have_vol = dcr->is_tape_position_ok();
}
if (!have_vol) {
dev->rLock(true);
block_device(dev, BST_DOING_ACQUIRE);
dev->Unlock();
Dmsg1(190, "jid=%u Do mount_next_write_vol\n", (uint32_t)jcr->JobId);
if (!dcr->mount_next_write_volume()) {
if (!job_canceled(jcr)) {
/* Reduce "noise" -- don't print if job canceled */
Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
dev->print_name());
Dmsg1(200, "Could not ready device %s for append.\n",
dev->print_name());
}
dev->Lock();
unblock_device(dev);
goto get_out;
}
Dmsg2(190, "Output pos=%u:%u\n", dcr->dev->file, dcr->dev->block_num);
dev->Lock();
unblock_device(dev);
}
dev->num_writers++; /* we are now a writer */
if (jcr->NumWriteVolumes == 0) {
jcr->NumWriteVolumes = 1;
}
dev->VolCatInfo.VolCatJobs++; /* increment number of jobs on vol */
Dmsg4(100, "=== nwriters=%d nres=%d vcatjob=%d dev=%s\n",
dev->num_writers, dev->num_reserved(), dev->VolCatInfo.VolCatJobs, dev->print_name());
dcr->dir_update_volume_info(false, false); /* send Volume info to Director */
ok = true;
get_out:
/* Don't plugin close here, we might have multiple writers */
dcr->clear_reserved();
dev->Unlock();
dev->Unlock_acquire();
Leave(200);
return ok ? dcr : NULL;
}
/*********************************************************************
* Acquire device for reading.
* The drive should have previously been reserved by calling
* reserve_device_for_read(). We read the Volume label from the block and
* leave the block pointers just after the label.
*
* Returns: NULL if failed for any reason
* dcr if successful
*/
bool acquire_device_for_read(DCR *dcr)
{
DEVICE *dev;
JCR *jcr = dcr->jcr;
bool ok = false;
bool tape_previously_mounted;
VOL_LIST *vol;
bool try_autochanger = true;
int i;
int vol_label_status;
int retry = 0;
Enter(rdbglvl);
dev = dcr->dev;
dev->Lock_read_acquire();
Dmsg2(rdbglvl, "dcr=%p dev=%p\n", dcr, dcr->dev);
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->dblock(BST_DOING_ACQUIRE);
if (dev->num_writers > 0) {
Jmsg2(jcr, M_FATAL, 0, _("Acquire read: num_writers=%d not zero. Job %d canceled.\n"),
dev->num_writers, jcr->JobId);
goto get_out;
}
/* Find next Volume, if any */
vol = jcr->VolList;
if (!vol) {
char ed1[50];
Jmsg(jcr, M_FATAL, 0, _("No volumes specified for reading. Job %s canceled.\n"),
edit_int64(jcr->JobId, ed1));
goto get_out;
}
jcr->CurReadVolume++;
for (i=1; i<jcr->CurReadVolume; i++) {
vol = vol->next;
}
if (!vol) {
Jmsg(jcr, M_FATAL, 0, _("Logic error: no next volume to read. Numvol=%d Curvol=%d\n"),
jcr->NumReadVolumes, jcr->CurReadVolume);
goto get_out; /* should not happen */
}
set_dcr_from_vol(dcr, vol);
Dmsg2(rdbglvl, "Want Vol=%s Slot=%d\n", vol->VolumeName, vol->Slot);
/*
* If the MediaType requested for this volume is not the
* same as the current drive, we attempt to find the same
* device that was used to write the orginal volume. If
* found, we switch to using that device.
*
* N.B. A lot of routines rely on the dcr pointer not changing
* read_records.c even has multiple dcrs cached, so we take care
* here to release all important parts of the dcr and re-acquire
* them such as the block pointer (size may change), but we do
* not release the dcr.
*/
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
if (dcr->media_type[0] && !bstrcmp(dcr->media_type, dev->device->media_type)) {
RCTX rctx;
DIRSTORE *store;
int status;
Jmsg3(jcr, M_INFO, 0, _("Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
" device=%s\n"),
dcr->media_type, dev->device->media_type, dev->print_name());
Dmsg3(rdbglvl, "Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
" device=%s\n",
dcr->media_type, dev->device->media_type, dev->print_name());
dev->dunblock(DEV_UNLOCKED);
lock_reservations();
memset(&rctx, 0, sizeof(RCTX));
rctx.jcr = jcr;
jcr->read_dcr = dcr;
jcr->reserve_msgs = New(alist(10, not_owned_by_alist));
rctx.any_drive = true;
rctx.device_name = vol->device;
store = new DIRSTORE;
memset(store, 0, sizeof(DIRSTORE));
store->name[0] = 0; /* No dir name */
bstrncpy(store->media_type, vol->MediaType, sizeof(store->media_type));
bstrncpy(store->pool_name, dcr->pool_name, sizeof(store->pool_name));
bstrncpy(store->pool_type, dcr->pool_type, sizeof(store->pool_type));
store->append = false;
rctx.store = store;
clean_device(dcr); /* clean up the dcr */
/*
* Search for a new device
*/
status = search_res_for_device(rctx);
release_reserve_messages(jcr); /* release queued messages */
unlock_reservations();
if (status == 1) { /* found new device to use */
/*
* Switching devices, so acquire lock on new device,
* then release the old one.
*/
dcr->dev->Lock_read_acquire(); /* lock new one */
dev->Unlock_read_acquire(); /* release old one */
dev = dcr->dev; /* get new device pointer */
dev->dblock(BST_DOING_ACQUIRE);
dcr->VolumeName[0] = 0;
Jmsg(jcr, M_INFO, 0, _("Media Type change. New read device %s chosen.\n"),
dev->print_name());
Dmsg1(50, "Media Type change. New read device %s chosen.\n", dev->print_name());
bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
dcr->setVolCatName(vol->VolumeName);
bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
dcr->VolCatInfo.Slot = vol->Slot;
dcr->VolCatInfo.InChanger = vol->Slot > 0;
bstrncpy(dcr->pool_name, store->pool_name, sizeof(dcr->pool_name));
bstrncpy(dcr->pool_type, store->pool_type, sizeof(dcr->pool_type));
} else {
/* error */
Jmsg1(jcr, M_FATAL, 0, _("No suitable device found to read Volume \"%s\"\n"),
vol->VolumeName);
Dmsg1(rdbglvl, "No suitable device found to read Volume \"%s\"\n", vol->VolumeName);
goto get_out;
}
}
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->clear_unload();
if (dev->vol && dev->vol->is_swapping()) {
dev->vol->set_slot(vol->Slot);
Dmsg3(rdbglvl, "swapping: slot=%d Vol=%s dev=%s\n", dev->vol->get_slot(),
dev->vol->vol_name, dev->print_name());
}
init_device_wait_timers(dcr);
tape_previously_mounted = dev->can_read() || dev->can_append() ||
dev->is_labeled();
// tape_initially_mounted = tape_previously_mounted;
/* Volume info is always needed because of VolParts */
Dmsg1(rdbglvl, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
if (!dcr->dir_get_volume_info(GET_VOL_INFO_FOR_READ)) {
Dmsg2(rdbglvl, "dir_get_vol_info failed for vol=%s: %s\n",
dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
dev->set_load(); /* set to load volume */
for ( ;; ) {
/* If not polling limit retries */
if (!dev->poll && retry++ > 10) {
break;
}
dev->clear_labeled(); /* force reread of label */
if (job_canceled(jcr)) {
char ed1[50];
Mmsg1(dev->errmsg, _("Job %s canceled.\n"), edit_int64(jcr->JobId, ed1));
Jmsg(jcr, M_INFO, 0, dev->errmsg);
goto get_out; /* error return */
}
dcr->do_unload();
dcr->do_swapping(false/*!is_writing*/);
dcr->do_load(false /*!is_writing*/);
set_dcr_from_vol(dcr, vol); /* refresh dcr with desired volume info */
/*
* This code ensures that the device is ready for
* reading. If it is a file, it opens it.
* If it is a tape, it checks the volume name
*/
Dmsg1(rdbglvl, "stored: open vol=%s\n", dcr->VolumeName);
if (!dev->open(dcr, OPEN_READ_ONLY)) {
if (!dev->poll) {
Jmsg3(jcr, M_WARNING, 0, _("Read open device %s Volume \"%s\" failed: ERR=%s\n"),
dev->print_name(), dcr->VolumeName, dev->bstrerror());
}
goto default_path;
}
Dmsg1(rdbglvl, "opened dev %s OK\n", dev->print_name());
/* Read Volume Label */
Dmsg0(rdbglvl, "calling read-vol-label\n");
vol_label_status = read_dev_volume_label(dcr);
switch (vol_label_status) {
case VOL_OK:
Dmsg0(rdbglvl, "Got correct volume.\n");
ok = true;
dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
break; /* got it */
case VOL_IO_ERROR:
Dmsg0(rdbglvl, "IO Error\n");
/*
* Send error message generated by read_dev_volume_label()
* only we really had a tape mounted. This supresses superfluous
* error messages when nothing is mounted.
*/
if (tape_previously_mounted) {
Jmsg(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
goto default_path;
case VOL_NAME_ERROR:
Dmsg3(rdbglvl, "Vol name=%s want=%s drv=%s.\n", dev->VolHdr.VolumeName,
dcr->VolumeName, dev->print_name());
if (dev->is_volume_to_unload()) {
goto default_path;
}
dev->set_unload(); /* force unload of unwanted tape */
if (!unload_autochanger(dcr, -1)) {
/* at least free the device so we can re-open with correct volume */
dev->close(dcr);
free_volume(dev);
}
dev->set_load();
/* Fall through */
default:
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
default_path:
Dmsg0(rdbglvl, "default path\n");
tape_previously_mounted = true;
/*
* If the device requires mount, close it, so the device can be ejected.
*/
if (dev->requires_mount()) {
dev->close(dcr);
free_volume(dev);
}
/* Call autochanger only once unless ask_sysop called */
if (try_autochanger) {
int status;
Dmsg2(rdbglvl, "calling autoload Vol=%s Slot=%d\n",
dcr->VolumeName, dcr->VolCatInfo.Slot);
status = autoload_device(dcr, 0, NULL);
if (status > 0) {
try_autochanger = false;
continue; /* try reading volume mounted */
}
}
/* Mount a specific volume and no other */
Dmsg0(rdbglvl, "calling dir_ask_sysop\n");
if (!dcr->dir_ask_sysop_to_mount_volume(ST_READREADY)) {
goto get_out; /* error return */
}
/* Volume info is always needed because of VolParts */
Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
if (!dcr->dir_get_volume_info(GET_VOL_INFO_FOR_READ)) {
Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
dev->set_load(); /* set to load volume */
try_autochanger = true; /* permit trying the autochanger again */
continue; /* try reading again */
} /* end switch */
break;
} /* end for loop */
if (!ok) {
Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s for reading.\n"),
dev->print_name());
goto get_out;
}
dev->clear_append();
dev->set_read();
jcr->sendJobStatus(JS_Running);
Jmsg(jcr, M_INFO, 0, _("Ready to read from volume \"%s\" on device %s.\n"),
dcr->VolumeName, dev->print_name());
get_out:
dev->Lock();
dcr->clear_reserved();
/*
* Normally we are blocked, but in at least one error case above
* we are not blocked because we unsuccessfully tried changing
* devices.
*/
if (dev->is_blocked()) {
dev->dunblock(DEV_LOCKED);
} else {
dev->Unlock(); /* dunblock() unlock the device too */
}
Dmsg2(rdbglvl, "dcr=%p dev=%p\n", dcr, dcr->dev);
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->Unlock_read_acquire();
Leave(rdbglvl);
return ok;
}
/*
* If release is set, we rewind the current volume,
* which we no longer want, and ask the user (console)
* to mount the next volume.
*
* Continue trying until we get it, and then ensure
* that we can write on it.
*
* This routine returns a 0 only if it is REALLY
* impossible to get the requested Volume.
*
*/
bool DCR::mount_next_write_volume()
{
int retry = 0;
bool ask = false, recycle, autochanger;
bool do_find = true;
int mode;
DCR *dcr = this;
Dmsg2(150, "Enter mount_next_volume(release=%d) dev=%s\n", dev->must_unload(),
dev->print_name());
init_device_wait_timers(dcr);
lock_volumes();
/*
* Attempt to mount the next volume. If something non-fatal goes
* wrong, we come back here to re-try (new op messages, re-read
* Volume, ...)
*/
mount_next_vol:
Dmsg1(150, "mount_next_vol retry=%d\n", retry);
/* Ignore retry if this is poll request */
if (!dev->poll && retry++ > 4) {
/* Last ditch effort before giving up, force operator to respond */
VolCatInfo.Slot = 0;
unlock_volumes();
if (!dir_ask_sysop_to_mount_volume(dcr, ST_APPEND)) {
Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
dev->print_name());
goto no_lock_bail_out;
}
lock_volumes();
Dmsg1(150, "Continue after dir_ask_sysop_to_mount. must_load=%d\n", dev->must_load());
}
if (job_canceled(jcr)) {
Jmsg(jcr, M_FATAL, 0, _("Job %d canceled.\n"), jcr->JobId);
goto bail_out;
}
recycle = false;
if (retry >= 2) {
do_find = false;
}
if (dev->must_unload()) {
ask = true; /* ask operator to mount tape */
do_find = true; /* re-find a volume after unload */
}
do_unload();
do_swapping(true /*is_writing*/);
do_load(true /*is_writing*/);
if (do_find && !find_a_volume()) {
goto no_lock_bail_out;
}
if (job_canceled(jcr)) {
goto bail_out;
}
Dmsg3(150, "After find_next_append. Vol=%s Slot=%d Parts=%d\n",
VolCatInfo.VolCatName, VolCatInfo.Slot, VolCatInfo.VolCatParts);
/*
* Get next volume and ready it for append
* This code ensures that the device is ready for
* writing. We start from the assumption that there
* may not be a tape mounted.
*
* If the device is a file, we create the output
* file. If it is a tape, we check the volume name
* and move the tape to the end of data.
*
*/
if (autoload_device(dcr, true/*writing*/, NULL) > 0) {
autochanger = true;
ask = false;
} else {
autochanger = false;
VolCatInfo.Slot = 0;
ask = retry >= 2;
}
Dmsg1(150, "autoload_dev returns %d\n", autochanger);
/*
* If we autochanged to correct Volume or (we have not just
* released the Volume AND we can automount) we go ahead
* and read the label. If there is no tape in the drive,
* we will fail, recurse and ask the operator the next time.
*/
if (!dev->must_unload() && dev->is_tape() && dev->has_cap(CAP_AUTOMOUNT)) {
Dmsg0(250, "(1)Ask=0\n");
ask = false; /* don't ask SYSOP this time */
}
/* Don't ask if not removable */
if (!dev->is_removable()) {
Dmsg0(250, "(2)Ask=0\n");
ask = false;
}
Dmsg2(250, "Ask=%d autochanger=%d\n", ask, autochanger);
if (ask) {
unlock_volumes();
if (!dir_ask_sysop_to_mount_volume(dcr, ST_APPEND)) {
Dmsg0(150, "Error return ask_sysop ...\n");
goto no_lock_bail_out;
}
lock_volumes();
}
if (job_canceled(jcr)) {
goto bail_out;
}
Dmsg3(150, "want vol=%s devvol=%s dev=%s\n", VolumeName,
dev->VolHdr.VolumeName, dev->print_name());
if (dev->poll && dev->has_cap(CAP_CLOSEONPOLL)) {
dev->close();
}
/* Ensure the device is open */
if (dev->has_cap(CAP_STREAM)) {
mode = OPEN_WRITE_ONLY;
} else {
mode = OPEN_READ_WRITE;
}
/* Try autolabel if enabled */
if (dev->open(dcr, mode) < 0) {
try_autolabel(false); /* try to create a new volume label */
}
while (dev->open(dcr, mode) < 0) {
Dmsg1(150, "open_device failed: ERR=%s\n", dev->bstrerror());
if ((dev->is_file() && dev->is_removable()) || dev->is_dvd()) {
bool ok = true;
Dmsg0(150, "call scan_dir_for_vol\n");
if (dev->is_dvd()) {
if (!dev->mount(0)) {
ok = false;
}
}
if (ok && dev->scan_dir_for_volume(dcr)) {
if (dev->open(dcr, mode) >= 0) {
break; /* got a valid volume */
}
}
if (ok && dev->is_dvd()) {
dev->unmount(0);
}
}
if (try_autolabel(false) == try_read_vol) {
break; /* created a new volume label */
}
Dmsg0(50, "set_unload\n");
dev->set_unload(); /* force ask sysop */
ask = true;
Dmsg0(150, "goto mount_next_vol\n");
goto mount_next_vol;
}
/*
* Now check the volume label to make sure we have the right tape mounted
*/
read_volume:
switch (check_volume_label(ask, autochanger)) {
case check_next_vol:
Dmsg0(50, "set_unload\n");
dev->set_unload(); /* want a different Volume */
Dmsg0(150, "goto mount_next_vol\n");
goto mount_next_vol;
case check_read_vol:
goto read_volume;
case check_error:
goto bail_out;
case check_ok:
break;
}
/*
* See if we have a fresh tape or a tape with data.
*
* Note, if the LabelType is PRE_LABEL, it was labeled
* but never written. If so, rewrite the label but set as
* VOL_LABEL. We rewind and return the label (reconstructed)
* in the block so that in the case of a new tape, data can
* be appended just after the block label. If we are writing
* a second volume, the calling routine will write the label
* before writing the overflow block.
*
* If the tape is marked as Recycle, we rewrite the label.
*/
recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
if (dev->VolHdr.LabelType == PRE_LABEL || recycle) {
if (!rewrite_volume_label(dcr, recycle)) {
mark_volume_in_error();
goto mount_next_vol;
}
} else {
/*
* OK, at this point, we have a valid Bacula label, but
* we need to position to the end of the volume, since we are
* just now putting it into append mode.
*/
Dmsg0(200, "Device previously written, moving to end of data\n");
Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
VolumeName);
if (!dev->eod(dcr)) {
Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data on device %s: ERR=%s\n"),
dev->print_name(), dev->bstrerror());
mark_volume_in_error();
goto mount_next_vol;
}
if (!is_eod_valid()) {
Dmsg0(150, "goto mount_next_vol\n");
goto mount_next_vol;
}
dev->VolCatInfo.VolCatMounts++; /* Update mounts */
Dmsg1(150, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
if (!dir_update_volume_info(dcr, false, false)) {
goto bail_out;
}
/* Return an empty block */
empty_block(block); /* we used it for reading so set for write */
}
dev->set_append();
Dmsg1(150, "set APPEND, normal return from mount_next_write_volume. dev=%s\n",
dev->print_name());
unlock_volumes();
return true;
bail_out:
unlock_volumes();
no_lock_bail_out:
return false;
}