static int __devinit cypress_touchkey_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct cypress_touchkey_platform_data *pdata =
client->dev.platform_data;
struct cypress_touchkey_info *info;
struct input_dev *input_dev;
int ret = 0;
int i;
// int retry = NUM_OF_RETRY_UPDATE;
int ic_fw_ver;
int error;
struct device *sec_touchkey;
printk("[TKEY] %s _ %d\n",__func__,__LINE__);
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
return -EIO;
#ifdef CONFIG_OF
if (client->dev.of_node) {
pdata = devm_kzalloc(&client->dev,
sizeof(struct cypress_touchkey_platform_data),
GFP_KERNEL);
if (!pdata) {
dev_info(&client->dev, "Failed to allocate memory\n");
return -ENOMEM;
}
error = cypress_parse_dt(&client->dev, pdata);
if (error)
return error;
} else
pdata = client->dev.platform_data;
cypress_request_gpio(pdata);
#endif
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&client->dev, "fail to memory allocation.\n");
goto err_mem_alloc;
}
input_dev = input_allocate_device();
if (!input_dev) {
dev_err(&client->dev, "fail to allocate input device.\n");
goto err_input_dev_alloc;
}
client->irq = gpio_to_irq(pdata->gpio_int);
info->client = client;
info->input_dev = input_dev;
info->pdata = pdata;
info->irq = client->irq;
info->touchkey_update_status = 0;
input_dev->name = "sec_touchkey";
input_dev->phys = info->phys;
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = &client->dev;
info->is_powering_on = true;
cypress_power_onoff(info, 1);
msleep(50);
set_bit(EV_SYN, input_dev->evbit);
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_LED, input_dev->evbit);
set_bit(LED_MISC, input_dev->ledbit);
atomic_set(&info->keypad_enable, 1);
for (i = 0; i < pdata->keycodes_size; i++) {
info->keycode[i] = pdata->touchkey_keycode[i];
set_bit(info->keycode[i], input_dev->keybit);
}
input_set_drvdata(input_dev, info);
mutex_init(&info->touchkey_mutex);
ret = input_register_device(input_dev);
if (ret) {
dev_err(&client->dev, "[TOUCHKEY] failed to register input dev (%d).\n",
ret);
goto err_reg_input_dev;
}
i2c_set_clientdata(client, info);
if (info->pdata->gpio_led_en) {
ret = gpio_request(info->pdata->gpio_led_en,
"gpio_touchkey_led");
if (ret < 0) {
dev_err(&client->dev,
"gpio_touchkey_led gpio_request is failed\n");
goto err_gpio_request;
}
gpio_tlmm_config(GPIO_CFG(info->pdata->gpio_led_en, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), 1);
cypress_touchkey_con_hw(info, true);
}
#ifdef USE_OPEN_CLOSE
input_dev->open = cypress_input_open;
input_dev->close = cypress_input_close;
#endif
dev_info(&info->client->dev, "gpio_to_irq IRQ %d\n",
client->irq);
ret = request_threaded_irq(client->irq, NULL,
cypress_touchkey_interrupt,
IRQF_TRIGGER_FALLING, client->dev.driver->name, info);
if (ret < 0) {
dev_err(&client->dev, "Failed to request IRQ %d (err: %d).\n",
client->irq, ret);
goto err_req_irq;
}
#ifdef CONFIG_HAS_EARLYSUSPEND
info->early_suspend.suspend = cypress_touchkey_early_suspend;
info->early_suspend.resume = cypress_touchkey_late_resume;
register_early_suspend(&info->early_suspend);
#endif /* CONFIG_HAS_EARLYSUSPEND */
info->led_wq = create_singlethread_workqueue("cypress_touchkey");
INIT_WORK(&info->led_work, cypress_touchkey_led_work);
info->leds.name = TOUCHKEY_BACKLIGHT;
info->leds.brightness = LED_FULL;
info->leds.max_brightness = LED_FULL;
info->leds.brightness_set = cypress_touchkey_brightness_set;
ret = led_classdev_register(&client->dev, &info->leds);
if (ret)
goto err_req_irq;
#if defined(CONFIG_LCD_CONNECTION_CHECK) //for SMD test
if (is_lcd_attached() == 0) {
disable_irq(client->irq);
printk("[TSK] %s : is_lcd_attached()=0 \n",__func__);
}
else{
#endif
msleep(20);
ic_fw_ver = i2c_smbus_read_byte_data(client, CYPRESS_FW_VER);
dev_err(&client->dev, "Touchkey FW Version: 0x%02x\n", ic_fw_ver);
#if defined(CONFIG_MACH_M2_ATT) || defined(CONFIG_MACH_M2_DCM) \
|| defined(CONFIG_MACH_M2_SKT) || defined(CONFIG_MACH_M2_KDI)
dev_err(&client->dev, "Touchkey FW Version: 0x%02x, system_rev: %x\n",
ic_fw_ver, system_rev);
if (0 /* ic_fw_ver < BIN_FW_VERSION */) {
dev_err(&client->dev, "[TOUCHKEY] touchkey_update Start!!\n");
disable_irq(client->irq);
while (retry--) {
if (ISSP_main() == 0) {
dev_err(&client->dev, "[TOUCHKEY] Update success!\n");
enable_irq(client->irq);
break;
}
dev_err(&client->dev,
"[TOUCHKEY] Touchkey_update failed... retry...\n");
}
if (retry <= 0) {
if (info->pdata->gpio_led_en)
cypress_touchkey_con_hw(info, false);
msleep(300);
dev_err(&client->dev, "[TOUCHKEY]Touchkey_update fail\n");
}
msleep(500);
ic_fw_ver = i2c_smbus_read_byte_data(info->client,
CYPRESS_FW_VER);
dev_err(&client->dev,
"[TouchKey] %s : FW Ver 0x%02x\n", __func__, ic_fw_ver);
} else {
dev_err(&client->dev, "[TouchKey] FW update does not need!\n");
}
#endif
cypress_touchkey_auto_cal(info);
#if defined(CONFIG_LCD_CONNECTION_CHECK) //for SMD test
}
#endif
sec_touchkey = device_create(sec_class, NULL, 0, NULL, "sec_touchkey");
if (IS_ERR(sec_touchkey)) {
pr_err("Failed to create device(sec_touchkey)!\n");
goto err_sysfs;
}
dev_set_drvdata(sec_touchkey, info);
if (device_create_file(sec_touchkey,
&dev_attr_keypad_enable) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_keypad_enable.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_firm_update_status) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_firm_update.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_firm_update) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_firm_update.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_firm_version_panel) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_firm_version_panel.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_firm_version_phone) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_firm_version_phone.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_brightness) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_brightness.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touch_sensitivity) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touch_sensitivity.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_menu) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_menu.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_back) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_back.attr.name);
goto err_sysfs;
}
#ifdef HOME_KEY_USE
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_home) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_home.attr.name);
goto err_sysfs;
}
#endif
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_raw_data0) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_raw_data0.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_raw_data1) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_raw_data1.attr.name);
goto err_sysfs;
}
#ifdef HOME_KEY_USE
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_raw_data2) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_raw_data2.attr.name);
goto err_sysfs;
}
#endif
if (device_create_file(sec_touchkey, &dev_attr_touchkey_idac0) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_idac0.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey, &dev_attr_touchkey_idac1) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_idac1.attr.name);
goto err_sysfs;
}
#ifdef HOME_KEY_USE
if (device_create_file(sec_touchkey, &dev_attr_touchkey_idac2) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_idac2.attr.name);
goto err_sysfs;
}
#endif
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_threshold) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_threshold.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_autocal_start) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_touchkey_autocal_start.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_autocal_enable) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_autocal_enable.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_autocal_stat) < 0) {
pr_err("Failed to create device file(%s)!\n",
dev_attr_autocal_stat.attr.name);
goto err_sysfs;
}
if (device_create_file(sec_touchkey,
&dev_attr_touchkey_brightness_level) < 0) {
printk(KERN_ERR "Failed to create device file(%s)!\n",
dev_attr_touchkey_brightness_level.attr.name);
goto err_sysfs;
}
info->is_powering_on = false;
return 0;
err_req_irq:
err_gpio_request:
input_unregister_device(input_dev);
err_reg_input_dev:
input_free_device(input_dev);
input_dev = NULL;
mutex_destroy(&info->touchkey_mutex);
err_input_dev_alloc:
kfree(info);
err_sysfs:
return -ENXIO;
err_mem_alloc:
return ret;
}
static int mdss_dsi_event_handler(struct mdss_panel_data *pdata,
int event, void *arg)
{
int rc = 0;
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
if (pdata == NULL) {
pr_err("%s: Invalid input data\n", __func__);
return -EINVAL;
}
#if defined(CONFIG_LCD_CONNECTION_CHECK) && defined(CONFIG_FB_MSM_MDSS_HIMAX_QHD_PANEL)
if(is_lcd_attached() == 0){
pr_err("%s: LCD not connected.\n", __func__);
return 0;
}
#endif
ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata,
panel_data);
pr_debug("%s+:event=%d\n", __func__, event);
switch (event) {
case MDSS_EVENT_UNBLANK:
rc = mdss_dsi_on(pdata);
mdss_dsi_op_mode_config(pdata->panel_info.mipi.mode,
pdata);
if (ctrl_pdata->on_cmds.link_state == DSI_LP_MODE)
rc = mdss_dsi_unblank(pdata);
break;
case MDSS_EVENT_PANEL_ON:
ctrl_pdata->ctrl_state |= CTRL_STATE_MDP_ACTIVE;
if (ctrl_pdata->on_cmds.link_state == DSI_HS_MODE)
rc = mdss_dsi_unblank(pdata);
break;
case MDSS_EVENT_BLANK:
if (ctrl_pdata->off_cmds.link_state == DSI_HS_MODE)
rc = mdss_dsi_blank(pdata);
break;
case MDSS_EVENT_PANEL_OFF:
ctrl_pdata->ctrl_state &= ~CTRL_STATE_MDP_ACTIVE;
if (ctrl_pdata->off_cmds.link_state == DSI_LP_MODE)
rc = mdss_dsi_blank(pdata);
rc = mdss_dsi_off(pdata);
break;
case MDSS_EVENT_FB_REGISTERED:
/*
* Okay, since framebuffer is registered, display the kernel logo if needed
*/
if (!ctrl_pdata->panel_data.panel_info.cont_splash_enabled) {
// load_samsung_boot_logo();
}
break;
case MDSS_EVENT_CONT_SPLASH_FINISH:
ctrl_pdata->ctrl_state &= ~CTRL_STATE_MDP_ACTIVE;
if (ctrl_pdata->on_cmds.link_state == DSI_LP_MODE) {
rc = mdss_dsi_cont_splash_on(pdata);
} else {
pr_debug("%s:event=%d, Dsi On not called: ctrl_state: %d\n",
__func__, event,
ctrl_pdata->on_cmds.link_state);
rc = -EINVAL;
}
break;
case MDSS_EVENT_PANEL_CLK_CTRL:
mdss_dsi_clk_req(ctrl_pdata, (int)arg);
break;
case MDSS_EVENT_DSI_CMDLIST_KOFF:
mdss_dsi_cmdlist_commit(ctrl_pdata, 1);
break;
case MDSS_EVENT_PANEL_UPDATE_FPS:
if (arg != NULL) {
rc = mdss_dsi_dfps_config(pdata, (int)arg);
pr_debug("%s:update fps to = %d\n",
__func__, (int)arg);
}
break;
case MDSS_EVENT_CONT_SPLASH_BEGIN:
if (ctrl_pdata->off_cmds.link_state == DSI_HS_MODE) {
/* Panel is Enabled in Bootloader */
rc = mdss_dsi_blank(pdata);
}
break;
case MDSS_EVENT_ENABLE_PARTIAL_UPDATE:
rc = mdss_dsi_ctl_partial_update(pdata);
break;
default:
pr_debug("%s: unhandled event=%d\n", __func__, event);
break;
}
pr_debug("%s-:event=%d, rc=%d\n", __func__, event, rc);
return rc;
}
