Esempi in C++ (Cpp) per ispresizer_config_filter_coef

Esempio n. 1

File: ispresizer.c Progetto: matianfu/kunlun-u-boot

/**
 * ispresizer_config_datapath - Specifies which input to use in resizer module
 * @input: Indicates the module that gives the image to resizer.
 *
 * Sets up the default resizer configuration according to the arguments.
 *
 * Returns 0 if successful, or -1 if an unsupported input was requested.
 **/
int ispresizer_config_datapath(enum ispresizer_input input)
{
	u32 cnt = 0;
	DPRINTK_ISPRESZ("ispresizer_config_datapath()+\n");
	ispres_obj.resinput = input;
	switch (input) {
	case RSZ_OTFLY_YUV:
		cnt &= ~ISPRSZ_CNT_INPTYP;
		cnt &= ~ISPRSZ_CNT_INPSRC;
		ispresizer_set_inaddr(0);
		ispresizer_config_inlineoffset(0);
		break;
	case RSZ_MEM_YUV:
		cnt |= ISPRSZ_CNT_INPSRC;
		cnt &= ~ISPRSZ_CNT_INPTYP;
		break;
	case RSZ_MEM_COL8:
		cnt |= ISPRSZ_CNT_INPSRC;
		cnt |= ISPRSZ_CNT_INPTYP;
		break;
	default:
		DPRINTK_ISPRESZ( "ISP_ERR : Wrong Input\n");
		return -1;
	}
	isp_reg_or(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, cnt);
	//ispresizer_config_ycpos(0);
	ispresizer_config_ycpos(1);
	ispresizer_config_filter_coef(&ispreszdefcoef);
	ispresizer_enable_cbilin(0);
	ispresizer_config_luma_enhance(&ispreszdefaultyenh);
	DPRINTK_ISPRESZ("ispresizer_config_datapath()-\n");
	return 0;
}

Esempio n. 2

File: ispresizer.c Progetto: matianfu/kunlun-u-boot

void ispresizer_init(void)
{
	mmio_base[OMAP3_ISP_IOMEM_MAIN] = 0x480BC000;
	mmio_base[OMAP3_ISP_IOMEM_CCDC] = 0x480BC600;
	mmio_base[OMAP3_ISP_IOMEM_RESZ] = 0x480BD000;

	ispresizer_config_filter_coef(&ispreszdefcoef);
}

Esempio n. 3

File: ispresizer.c Progetto: StarKissed/android_kernel_omap

/**
 * ispresizer_config_datapath - Specifies which input to use in resizer module
 * @input: Indicates the module that gives the image to resizer.
 *
 * Sets up the default resizer configuration according to the arguments.
 *
 * Returns 0 if successful, or -EINVAL if an unsupported input was requested.
 **/
int ispresizer_config_datapath(enum ispresizer_input input)
{
	u32 cnt = 0;
	DPRINTK_ISPRESZ("ispresizer_config_datapath()+\n");
	ispres_obj.resinput = input;
	switch (input) {
	case RSZ_OTFLY_YUV:
		cnt &= ~ISPRSZ_CNT_INPTYP;
		cnt &= ~ISPRSZ_CNT_INPSRC;
		ispresizer_set_inaddr(0);
		ispresizer_config_inlineoffset(0);
		break;
	case RSZ_MEM_YUV:
		cnt |= ISPRSZ_CNT_INPSRC;
		cnt &= ~ISPRSZ_CNT_INPTYP;
		break;
	case RSZ_MEM_COL8:
		cnt |= ISPRSZ_CNT_INPSRC;
		cnt |= ISPRSZ_CNT_INPTYP;
		break;
	default:
		printk(KERN_ERR "ISP_ERR : Wrong Input\n");
		return -EINVAL;
	}
	isp_reg_or(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, cnt);

	/* Use bilinear interpolation for upsampling per TRM */
	if (ispres_obj.outputwidth > ispres_obj.inputwidth)
		ispresizer_enable_cbilin(1);
	else
		ispresizer_enable_cbilin(0);

	ispresizer_config_ycpos(0);
	ispresizer_config_filter_coef(&ispreszdefcoef);
	ispresizer_config_luma_enhance(&ispreszdefaultyenh);
	DPRINTK_ISPRESZ("ispresizer_config_datapath()-\n");
	return 0;
}