static void intrpt_routine(struct work_struct *unused)
{
static u32 psu_status = 1; // default high, psu fail 時會 low
u8 val = 0;
if ((board_idx != 4) && (board_idx != 5) && (board_idx != 6)){
val = PCH_6_gpio_read_bit(57); // PSU_FAIL gpio
if(psu_status != val) {
// default high, psu fail 時會 low
if(val == 1) {
sprintf(Message, "PSU_FAIL OFF\n");
} else {
sprintf(Message, "PSU_FAIL ON\n");
}
psu_status = val;
wake_up_interruptible(&thecus_event_queue);
}
}
if(PCH_6_gpio_read_bit(72)==0) { // mute button
kd_mksound(0 * 440, 0);
keep_BUZZER = BUZZER_OFF;
}
// If cleanup wants us to die
if (module_die == 0)
queue_delayed_work(my_workqueue, &Task, dyn_work_queue_timer);
}
int speakup_thread(void *data)
{
unsigned long flags;
int should_break;
struct bleep our_sound;
our_sound.active = 0;
our_sound.freq = 0;
our_sound.jiffies = 0;
mutex_lock(&spk_mutex);
while (1) {
DEFINE_WAIT(wait);
while (1) {
spin_lock_irqsave(&speakup_info.spinlock, flags);
our_sound = spk_unprocessed_sound;
spk_unprocessed_sound.active = 0;
prepare_to_wait(&speakup_event, &wait,
TASK_INTERRUPTIBLE);
should_break = kthread_should_stop() ||
our_sound.active ||
(synth && synth->catch_up && synth->alive &&
(speakup_info.flushing ||
!synth_buffer_empty()));
spin_unlock_irqrestore(&speakup_info.spinlock, flags);
if (should_break)
break;
mutex_unlock(&spk_mutex);
schedule();
mutex_lock(&spk_mutex);
}
finish_wait(&speakup_event, &wait);
if (kthread_should_stop())
break;
if (our_sound.active)
kd_mksound(our_sound.freq, our_sound.jiffies);
if (synth && synth->catch_up && synth->alive) {
/* It is up to the callee to take the lock, so that it
* can sleep whenever it likes */
synth->catch_up(synth);
}
speakup_start_ttys();
}
mutex_unlock(&spk_mutex);
return 0;
}
static void beep(unsigned int freq)
{
if (sound)
kd_mksound(freq, HZ/10);
}
static ssize_t proc_thecus_io_write(struct file *file,
const char __user * buf, size_t length,
loff_t * ppos)
{
char *buffer, buf1[20];
int i, err, v1, v2;
u8 val;
if (!buf || length > PAGE_SIZE)
return -EINVAL;
err = -ENOMEM;
buffer = (char *) __get_free_page(GFP_KERNEL);
if (!buffer)
goto out2;
err = -EFAULT;
if (copy_from_user(buffer, buf, length))
goto out;
err = -EINVAL;
if (length < PAGE_SIZE) {
buffer[length] = '\0';
#define LF 0xA
if (length > 0 && buffer[length - 1] == LF)
buffer[length - 1] = '\0';
} else if (buffer[PAGE_SIZE - 1])
goto out;
memset(buf1, 0, sizeof(buf1));
/*
* Usage: echo "S_LED 1-16 0|1|2" >/proc/thecus_io //2:Blink * LED SATA 1-16 ERROR led
* Usage: echo "U_LED 0|1|2" >/proc/thecus_io //2:Blink * USB BUSY led
* Usage: echo "UF_LED 0|1|2" >/proc/thecus_io //2:Blink * USB ERROR led
* Usage: echo "Fail 0|1" >/proc/thecus_io * LED System Fail
* Usage: echo "Busy 0|1" >/proc/thecus_io * LED System Busy
* Usage: echo "Buzzer 0|1" >/proc/thecus_io * Buzzer
* Usage: echo "RESET_PIC" >/proc/thecus_io * RESET_PIC
*/
if (!strncmp(buffer, "S_LED", strlen("S_LED"))) {
i = sscanf(buffer + strlen("S_LED"), "%d %d\n", &v1, &v2);
if (i == 2) //two input
{
if (v2 == 0) //input 0: want to turn off
val = LED_OFF;
else if (v2 == 1) //turn on
val = LED_ON;
else
val = LED_BLINK1;
if (v1 >= 1 && v1 <= 16) {
v1 = v1 - 1;
if((board_idx == 0) || (board_idx == 3) || (board_idx == 7)) { // only for N8900 back board, it's error led begin 8~15
if(v1 >= 0 && v1 <= 7)
pca9532_set_led(v1+8, val);
else
pca9532_set_led(v1, val);
} else {
pca9532_set_led(v1, val);
}
}
}
} else if (!strncmp(buffer, "UF_LED", strlen("UF_LED"))) {
i = sscanf(buffer + strlen("UF_LED"), "%d\n", &v1);
if (i == 1) //only one input
{
_DBG(1, "UF_LED %d\n", v1);
if (v1 == 0) //input 0: want to turn off
val = LED_OFF;
else if (v1 == 1) //turn on
val = LED_ON;
else
val = LED_BLINK1;
led_usb_err = val;
pca9532_id_set_led(11, val);
}
} else if (!strncmp(buffer, "U_LED", strlen("U_LED"))) {
i = sscanf(buffer + strlen("U_LED"), "%d\n", &v1);
if (i == 1) //only one input
{
_DBG(1, "U_LED %d\n", v1);
if (v1 == 0) //input 0: want to turn off
val = LED_OFF;
else if (v1 == 1) //turn on
val = LED_ON;
else
val = LED_BLINK1;
led_usb_busy = val;
pca9532_id_set_led(12, val);
}
} else if (!strncmp(buffer, "PWR_LED", strlen("PWR_LED"))) {
i = sscanf(buffer + strlen("PWR_LED"), "%d\n", &v1);
if (i == 1) //only one input
{
_DBG(1, "PWR_LED %d\n", v1);
if (v1 == 0) //input 0: want to turn off
val = LED_OFF;
else if (v1 == 1) //turn on
val = LED_ON;
else
val = LED_BLINK1;
led_sys_power = val;
pca9532_id_set_led(13, val);
}
} else if (!strncmp(buffer, "Busy", strlen("Busy"))) {
i = sscanf(buffer + strlen("Busy"), "%d\n", &v1);
if (i == 1) //only one input
{
_DBG(1, "Busy %d\n", v1);
if (v1 == 0) //input 0: want to turn off
val = LED_OFF;
else if (v1 == 1) //turn on
val = LED_ON;
else
val = LED_BLINK1;
led_sys_busy = val;
pca9532_id_set_led(14, val);
}
} else if (!strncmp(buffer, "Fail", strlen("Fail"))) {
i = sscanf(buffer + strlen("Fail"), "%d\n", &v1);
if (i == 1) //only one input
{
_DBG(1, "Fail %d\n", v1);
if (v1 == 0) //input 0: want to turn off
val = LED_OFF;
else if (v1 == 1) //turn on
val = LED_ON;
else
val = LED_BLINK1;
led_sys_err = val;
pca9532_id_set_led(15, val);
}
/*
} else if (!strncmp(buffer, "GPIO2", strlen("GPIO2"))) {
i = sscanf(buffer + strlen("GPIO2"), "%d\n", &v1);
if (i == 1) //only one input
{
printk("GPIO2 %d\n", v1);
PCH_6_gpio_write_bit(2,v1);
}
} else if (!strncmp(buffer, "GPIO3", strlen("GPIO3"))) {
i = sscanf(buffer + strlen("GPIO3"), "%d\n", &v1);
if (i == 1) //only one input
{
printk("GPIO3 %d\n", v1);
PCH_6_gpio_write_bit(3,v1);
}
*/
} else if (!strncmp(buffer, "Buzzer", strlen("Buzzer"))) {
i = sscanf(buffer + strlen("Buzzer"), "%d\n", &v1);
if (i == 1) //only one input
{
_DBG(1, "Buzzer %d\n", v1);
if (v1 == 0) //input 0: want to turn off
val = BUZZER_OFF;
else
val = BUZZER_ON;
keep_BUZZER = val;
kd_mksound(val * 440, 0);
}
} else if (!strncmp(buffer, "RESET_PIC", strlen("RESET_PIC"))) {
reset_pic();
}
err = length;
out:
free_page((unsigned long) buffer);
out2:
*ppos = 0;
return err;
}
static int
kbd_ioctl (struct inode *i, struct file *f, unsigned int cmd, unsigned long arg)
{
unsigned char c;
unsigned char leds = 0;
int value;
switch (cmd){
case KIOCTYPE: /* return keyboard type */
put_user_ret(sunkbd_type, (int *) arg, -EFAULT);
break;
case KIOCGTRANS:
put_user_ret(TR_UNTRANS_EVENT, (int *) arg, -EFAULT);
break;
case KIOCTRANS:
get_user_ret(value, (int *) arg, -EFAULT);
if (value != TR_UNTRANS_EVENT)
return -EINVAL;
break;
case KIOCLAYOUT:
put_user_ret(sunkbd_layout, (int *) arg, -EFAULT);
break;
case KIOCSDIRECT:
#ifndef CODING_NEW_DRIVER
get_user_ret(value, (int *) arg, -EFAULT);
if(value)
kbd_redirected = fg_console + 1;
else
kbd_redirected = 0;
kbd_table [fg_console].kbdmode = kbd_redirected ? VC_RAW : VC_XLATE;
#endif
break;
case KIOCCMD:
get_user_ret(value, (int *) arg, -EFAULT);
c = (unsigned char) value;
switch (c) {
case SKBDCMD_CLICK:
case SKBDCMD_NOCLICK:
send_cmd(c);
return 0;
case SKBDCMD_BELLON:
kd_mksound(1,0);
return 0;
case SKBDCMD_BELLOFF:
kd_mksound(0,0);
return 0;
default:
return -EINVAL;
}
case KIOCSLED:
get_user_ret(c, (unsigned char *) arg, -EFAULT);
if (c & LED_SCRLCK) leds |= (1 << VC_SCROLLOCK);
if (c & LED_NLOCK) leds |= (1 << VC_NUMLOCK);
if (c & LED_CLOCK) leds |= (1 << VC_CAPSLOCK);
compose_led_on = !!(c & LED_CMPOSE);
sun_setledstate(kbd_table + fg_console, leds);
break;
case KIOCGLED:
put_user_ret(vcleds_to_sunkbd(getleds()), (unsigned char *) arg, -EFAULT);
break;
case KIOCGRATE:
{
struct kbd_rate rate;
rate.delay = kbd_delay_ticks;
if (kbd_rate_ticks)
rate.rate = HZ / kbd_rate_ticks;
else
rate.rate = 0;
copy_to_user_ret((struct kbd_rate *)arg, &rate,
sizeof(struct kbd_rate), -EFAULT);
return 0;
}
case KIOCSRATE:
{
struct kbd_rate rate;
if (verify_area(VERIFY_READ, (void *)arg,
sizeof(struct kbd_rate)))
return -EFAULT;
copy_from_user(&rate, (struct kbd_rate *)arg,
sizeof(struct kbd_rate));
if (rate.rate > 50)
return -EINVAL;
if (rate.rate == 0)
kbd_rate_ticks = 0;
else
kbd_rate_ticks = HZ / rate.rate;
kbd_delay_ticks = rate.delay;
return 0;
}
case FIONREAD: /* return number of bytes in kbd queue */
{
int count;
count = kbd_head - kbd_tail;
put_user_ret((count < 0) ? KBD_QSIZE - count : count, (int *) arg, -EFAULT);
return 0;
}
default:
printk ("Unknown Keyboard ioctl: %8.8x\n", cmd);
return -EINVAL;
}
return 0;
}
