/** The main entry point of GridLAB-D
Exit codes
- \b 0 run completed ok
- \b 1 command-line processor stopped
- \b 2 environment startup failed
- \b 3 test procedure failed
- \b 4 user rejects conditions of use
- \b 5 simulation stopped before completing
- \b 6 initialization failed
**/
int main(int argc, /**< the number entries on command-line argument list \p argv */
char *argv[]) /**< a list of pointers to the command-line arguments */
{
int rv = 0;
time_t t_load = time(NULL);
global_process_id = getpid();
#if defined WIN32 && _DEBUG
atexit(pause_at_exit);
#endif
/* main initialization */
if (!output_init(argc,argv) || !exec_init())
exit(6);
/* process command line arguments */
if (cmdarg_load(argc,argv)==FAILED)
{
output_fatal("shutdown after command line rejected");
/* TROUBLESHOOT
The command line is not valid and the system did not
complete its startup procedure. Correct the problem
with the command line and try again.
*/
exit(1);
}
/* setup the random number generator */
random_init();
/* pidfile */
if (strcmp(global_pidfile,"")!=0)
{
FILE *fp = fopen(global_pidfile,"w");
if (fp==NULL)
{
output_fatal("unable to create pidfile '%s'", global_pidfile);
/* TROUBLESHOOT
The system must allow creation of the process id file at
the location indicated in the message. Create and/or
modify access rights to the path for that file and try again.
*/
exit(1);
}
#ifdef WIN32
#define getpid _getpid
#endif
fprintf(fp,"%d\n",getpid());
output_verbose("process id %d written to %s", getpid(), global_pidfile);
fclose(fp);
atexit(delete_pidfile);
}
/* do legal stuff */
#ifdef LEGAL_NOTICE
if (strcmp(global_pidfile,"")==0 && legal_notice()==FAILED)
exit(4);
#endif
/* set up the test */
if (global_test_mode)
{
#ifndef _NO_CPPUNIT
output_message("Entering test mode");
if (test_start(argc,argv)==FAILED)
{
output_fatal("shutdown after startup test failed");
/* TROUBLESHOOT
A self-test procedure failed and the system stopped.
Check the output of the test stream and correct the
indicated problem. If the test stream is not redirected
so as to save the output, try using the <b>--redirect</b>
command line option.
*/
exit(3);
}
exit(0); /* There is no environment to speak of, so exit. */
#else
output_message("Unit Tests not enabled. Recompile with _NO_CPPUNIT unset");
#endif
}
/* start the processing environment */
output_verbose("load time: %d sec", time(NULL) - t_load);
output_verbose("starting up %s environment", global_environment);
if (environment_start(argc,argv)==FAILED)
{
output_fatal("environment startup failed: %s", strerror(errno));
/* TROUBLESHOOT
The requested environment could not be started. This usually
follows a more specific message regarding the startup problem.
Follow the recommendation for the indicated problem.
*/
rv = 2;
}
/* post process the test */
if (global_test_mode)
{
#ifndef _NO_CPPUNIT
output_message("Exiting test mode");
if (test_end(argc,argv)==FAILED)
{
output_error("shutdown after end test failed");
exit(3);
}
#endif
}
/* save the model */
if (strcmp(global_savefile,"")!=0)
{
if (saveall(global_savefile)==FAILED)
output_error("save to '%s' failed", global_savefile);
}
/* do module dumps */
if (global_dumpall!=FALSE)
{
output_verbose("dumping module data");
module_dumpall();
}
/* KML output */
if (strcmp(global_kmlfile,"")!=0)
kml_dump(global_kmlfile);
/* wrap up */
output_verbose("shutdown complete");
/* profile results */
if (global_profiler)
class_profiles();
/* restore locale */
locale_pop();
/* compute elapsed runtime */
output_verbose("elapsed runtime %d seconds", realtime_runtime());
exit(rv);
}
/** The main entry point of GridLAB-D
@returns Exit codes XC_SUCCESS, etc. (see gridlabd.h)
**/
int main(int argc, /**< the number entries on command-line argument list \p argv */
char *argv[]) /**< a list of pointers to the command-line arguments */
{
char *pd1, *pd2;
int i, pos=0;
char *browser = getenv("GLBROWSER");
/* set the default timezone */
timestamp_set_tz(NULL);
exec_clock(); /* initialize the wall clock */
realtime_starttime(); /* mark start */
/* set the process info */
global_process_id = getpid();
/* specify the default browser */
if ( browser!= NULL )
strncpy(global_browser,browser,sizeof(global_browser)-1);
#if defined WIN32 && _DEBUG
atexit(pause_at_exit);
#endif
#ifdef WIN32
kill_starthandler();
atexit(kill_stophandler);
#endif
/* capture the execdir */
strcpy(global_execname,argv[0]);
strcpy(global_execdir,argv[0]);
pd1 = strrchr(global_execdir,'/');
pd2 = strrchr(global_execdir,'\\');
if (pd1>pd2) *pd1='\0';
else if (pd2>pd1) *pd2='\0';
/* determine current working directory */
getcwd(global_workdir,1024);
/* capture the command line */
for (i=0; i<argc; i++)
{
if (pos < (int)(sizeof(global_command_line)-strlen(argv[i])))
pos += sprintf(global_command_line+pos,"%s%s",pos>0?" ":"",argv[i]);
}
/* main initialization */
if (!output_init(argc,argv) || !exec_init())
exit(XC_INIERR);
/* set thread count equal to processor count if not passed on command-line */
if (global_threadcount == 0)
global_threadcount = processor_count();
output_verbose("detected %d processor(s)", processor_count());
output_verbose("using %d helper thread(s)", global_threadcount);
/* process command line arguments */
if (cmdarg_load(argc,argv)==FAILED)
{
output_fatal("shutdown after command line rejected");
/* TROUBLESHOOT
The command line is not valid and the system did not
complete its startup procedure. Correct the problem
with the command line and try again.
*/
exit(XC_ARGERR);
}
/* stitch clock */
global_clock = global_starttime;
/* initialize scheduler */
sched_init(0);
/* recheck threadcount in case user set it 0 */
if (global_threadcount == 0)
{
global_threadcount = processor_count();
output_verbose("using %d helper thread(s)", global_threadcount);
}
/* see if newer version is available */
if ( global_check_version )
check_version(1);
/* setup the random number generator */
random_init();
/* pidfile */
if (strcmp(global_pidfile,"")!=0)
{
FILE *fp = fopen(global_pidfile,"w");
if (fp==NULL)
{
output_fatal("unable to create pidfile '%s'", global_pidfile);
/* TROUBLESHOOT
The system must allow creation of the process id file at
the location indicated in the message. Create and/or
modify access rights to the path for that file and try again.
*/
exit(XC_PRCERR);
}
#ifdef WIN32
#define getpid _getpid
#endif
fprintf(fp,"%d\n",getpid());
output_verbose("process id %d written to %s", getpid(), global_pidfile);
fclose(fp);
atexit(delete_pidfile);
}
/* do legal stuff */
#ifdef LEGAL_NOTICE
if (strcmp(global_pidfile,"")==0 && legal_notice()==FAILED)
exit(XC_USRERR);
#endif
/* start the processing environment */
output_verbose("load time: %d sec", realtime_runtime());
output_verbose("starting up %s environment", global_environment);
if (environment_start(argc,argv)==FAILED)
{
output_fatal("environment startup failed: %s", strerror(errno));
/* TROUBLESHOOT
The requested environment could not be started. This usually
follows a more specific message regarding the startup problem.
Follow the recommendation for the indicated problem.
*/
if ( exec_getexitcode()==XC_SUCCESS )
exec_setexitcode(XC_ENVERR);
}
/* save the model */
if (strcmp(global_savefile,"")!=0)
{
if (saveall(global_savefile)==FAILED)
output_error("save to '%s' failed", global_savefile);
}
/* do module dumps */
if (global_dumpall!=FALSE)
{
output_verbose("dumping module data");
module_dumpall();
}
/* KML output */
if (strcmp(global_kmlfile,"")!=0)
kml_dump(global_kmlfile);
/* terminate */
module_termall();
/* wrap up */
output_verbose("shutdown complete");
/* profile results */
if (global_profiler)
{
class_profiles();
module_profiles();
}
#ifdef DUMP_SCHEDULES
/* dump a copy of the schedules for reference */
schedule_dumpall("schedules.txt");
#endif
/* restore locale */
locale_pop();
/* if pause enabled */
#ifndef WIN32
if (global_pauseatexit) {
output_verbose("pausing at exit");
while (true) {
sleep(5);
}
}
#endif
/* compute elapsed runtime */
output_verbose("elapsed runtime %d seconds", realtime_runtime());
output_verbose("exit code %d", exec_getexitcode());
exit(exec_getexitcode());
}
