Esempi in C++ (Cpp) per lge_add_lcd_kcal_devices

Esempio n. 1

File: board-8926-jagnm-vtr_ca.c Progetto: TeamRegular/android_kernel_lge_e2nxx-stock

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#if defined(CONFIG_ANDROID_RAM_CONSOLE)
	lge_add_persistent_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
    lge_android_usb_init();
#endif
	 #if defined(CONFIG_LCD_KCAL)
	 lge_add_lcd_kcal_devices();
#endif

#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif

#ifdef CONFIG_LGE_ENABLE_MMC_STRENGTH_CONTROL
    lge_add_mmc_strength_devices();
#endif

}

Esempio n. 2

File: board-8974-g2-com.c Progetto: daeiron/LG_G3_Kernel

void __init msm8974_add_drivers(void)
{
    msm_smem_init();
    msm_init_modem_notifier_list();
    msm_smd_init();
    msm_rpm_driver_init();
    msm_pm_sleep_status_init();
    rpm_regulator_smd_driver_init();
    msm_spm_device_init();
    krait_power_init();
    if (of_board_is_rumi())
        msm_clock_init(&msm8974_rumi_clock_init_data);
    else
        msm_clock_init(&msm8974_clock_init_data);
    tsens_tm_init_driver();
#ifdef CONFIG_LGE_LCD_TUNING
    lge_add_lcd_misc_devices();
#endif
    lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
    lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
    lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
    lge_add_diag_devices();
#endif
#if defined(CONFIG_LCD_KCAL)
    lge_add_lcd_kcal_devices();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
    lge_add_android_usb_devices();
#endif
}

Esempio n. 3

File: board-8916-stylusc.c Progetto: GameTheory-/android_kernel_g4stylusn

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8916_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
#ifdef CONFIG_LGE_LCD_TUNING
	 lge_add_lcd_ctrl_devices();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	 lge_add_android_usb_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	 lge_add_diag_devices();
#endif
#if defined(CONFIG_LCD_KCAL)
	 lge_add_lcd_kcal_devices();
#endif
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#if defined(CONFIG_PRE_SELF_DIAGNOSIS)
	lge_add_pre_selfd_devices();
#endif
}

Esempio n. 4

File: board-8974-g2-us.c Progetto: SerenityS/msm8974_G2_render_kernel

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_BRICKED_THERMAL
	msm_thermal_init(&msm_thermal_pdata);
#else
	msm_thermal_device_init();
#endif

#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_MACH_MSM8974_G2_VZW
	lge_add_android_usb_devices();
#endif
/* LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/* LGE_CHANGE_E, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
}

Esempio n. 5

File: board-8974-g2-tel_au.c Progetto: RenderBroken/msm8974_G2_render_kernel

void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_INTELLI_THERMAL
	msm_thermal_init(NULL);
#else
 	msm_thermal_device_init();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_MACH_MSM8974_G2_VZW
	lge_add_android_usb_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
}

Esempio n. 6

File: board-8974-g3-us.c Progetto: beats4x/kernel_lge_g3-v10m

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#ifdef CONFIG_LGE_QSDL_SUPPORT
	lge_add_qsdl_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
}

Esempio n. 7

File: board-8974-g2-kr.c Progetto: Carter07/Dorimanx-LG-G2-D802-Kernel

void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_INTELLI_THERMAL
	msm_thermal_init(NULL);
#else
	msm_thermal_device_init();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif // CONFIG_LCD_KCAL

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
}

Esempio n. 8

File: board-8974-vu3-kr.c Progetto: AmperificSuperKANG/lge-kernel-d802

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_VU3EVB)
	vu3ebv_init_input();
#endif
}

Esempio n. 9

File: board-8974-vu3-kr.c Progetto: TeamLGOG/android_kernel_lge_f320k

void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/* LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/* LGE_CHANGE_E, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif // CONFIG_LCD_KCAL

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_VU3EVB)
	vu3ebv_init_input();
#endif
}

Esempio n. 10

File: board-8974-g3-global.c Progetto: MH2033/VIPER_KERNEL_LP_D802

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
/* LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-28, Wifi Bring Up */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/* LGE_CHANGE_E, [WiFi][[email protected]], 2013-01-28, Wifi Bring Up */
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();
#endif
}

Esempio n. 11

File: board-8974-g3-us.c Progetto: Molinager/LG_MSM8974

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#ifdef CONFIG_LGE_QSDL_SUPPORT
	lge_add_qsdl_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
}

Esempio n. 12

File: board-8974-hammerhead.c Progetto: MattCrystal/petulant-spice

void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	krait_power_init();
	msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
#if defined(CONFIG_LCD_KCAL)
	lge_add_lcd_kcal_devices();
#endif
}

Esempio n. 13

File: board-8974-dzny-dcm.c Progetto: Defector/Defkernel_F320

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();
#endif
/*                                                                       */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                       */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif

}