static void lis3l02dq_trigger_bh_to_ring(struct work_struct *work_s)
{
struct iio_sw_ring_helper_state *h
= container_of(work_s, struct iio_sw_ring_helper_state,
work_trigger_to_ring);
struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
st->inter = 0;
iio_sw_trigger_bh_to_ring(work_s);
}
/**
* lis3l02dq_data_rdy_trig_poll() the event handler for the data rdy trig
**/
static int lis3l02dq_data_rdy_trig_poll(struct iio_dev *indio_dev,
int index,
s64 timestamp,
int no_test)
{
struct iio_sw_ring_helper_state *h
= iio_dev_get_devdata(indio_dev);
struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
iio_trigger_poll(st->trig, timestamp);
return IRQ_HANDLED;
}
/**
* lis3l02dq_poll_func_th() top half interrupt handler called by trigger
* @private_data: iio_dev
**/
static void lis3l02dq_poll_func_th(struct iio_dev *indio_dev, s64 time)
{
struct iio_sw_ring_helper_state *h
= iio_dev_get_devdata(indio_dev);
struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
/* in this case we need to slightly extend the helper function */
iio_sw_poll_func_th(indio_dev, time);
/* Indicate that this interrupt is being handled */
/* Technically this is trigger related, but without this
* handler running there is currently now way for the interrupt
* to clear.
*/
st->inter = 1;
}
static int lis3l02dq_get_ring_element(struct iio_sw_ring_helper_state *h,
u8 *buf)
{
int ret, i;
u8 *rx_array ;
s16 *data = (s16 *)buf;
rx_array = kzalloc(4 * (h->indio_dev->ring->scan_count), GFP_KERNEL);
if (rx_array == NULL)
return -ENOMEM;
ret = lis3l02dq_read_all(lis3l02dq_h_to_s(h), rx_array);
if (ret < 0)
return ret;
for (i = 0; i < h->indio_dev->ring->scan_count; i++)
data[i] = combine_8_to_16(rx_array[i*4+1],
rx_array[i*4+3]);
kfree(rx_array);
return i*sizeof(data[0]);
}
/**
* lis3l02dq_spi_read_reg_8() - read single byte from a single register
* @dev: device asosciated with child of actual device (iio_dev or iio_trig)
* @reg_address: the address of the register to be read
* @val: pass back the resulting value
**/
int lis3l02dq_spi_read_reg_8(struct device *dev, u8 reg_address, u8 *val)
{
int ret;
struct spi_message msg;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_sw_ring_helper_state *h = iio_dev_get_devdata(indio_dev);
struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
struct spi_transfer xfer = {
.tx_buf = st->tx,
.rx_buf = st->rx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
};
mutex_lock(&st->buf_lock);
st->tx[0] = LIS3L02DQ_READ_REG(reg_address);
st->tx[1] = 0;
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
ret = spi_sync(st->us, &msg);
*val = st->rx[1];
mutex_unlock(&st->buf_lock);
return ret;
}
/**
* lis3l02dq_spi_write_reg_8() - write single byte to a register
* @dev: device associated with child of actual device (iio_dev or iio_trig)
* @reg_address: the address of the register to be written
* @val: the value to write
**/
int lis3l02dq_spi_write_reg_8(struct device *dev,
u8 reg_address,
u8 *val)
{
int ret;
struct spi_message msg;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_sw_ring_helper_state *h
= iio_dev_get_devdata(indio_dev);
struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
struct spi_transfer xfer = {
.tx_buf = st->tx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
};
mutex_lock(&st->buf_lock);
st->tx[0] = LIS3L02DQ_WRITE_REG(reg_address);
st->tx[1] = *val;
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
ret = spi_sync(st->us, &msg);
mutex_unlock(&st->buf_lock);
return ret;
}
/**
* lisl302dq_spi_write_reg_s16() - write 2 bytes to a pair of registers
* @dev: device associated with child of actual device (iio_dev or iio_trig)
* @reg_address: the address of the lower of the two registers. Second register
* is assumed to have address one greater.
* @val: value to be written
**/
static int lis3l02dq_spi_write_reg_s16(struct device *dev,
u8 lower_reg_address,
s16 value)
{
int ret;
struct spi_message msg;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_sw_ring_helper_state *h
= iio_dev_get_devdata(indio_dev);
struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
struct spi_transfer xfers[] = { {
.tx_buf = st->tx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
}, {
.tx_buf = st->tx + 2,
