/**
* wakeupISR - handle LLWU interrupts after wakeup.
*/
void SnoozeClass::wakeupISR( void ) {
NVIC_DISABLE_IRQ( IRQ_LLWU ); // disable wakeup isr
if ( sleep_mode == LLS ) {
__disable_irq( );
llwuFlag = llwu_clear_flags( );// clear flags
lptmrISR( );
cmp0ISR( );
#ifdef KINETISK
rtcISR( );
#endif
tsiISR( );
/************************************
* back to PEE if in PBE, else it is
* in either BLPI/BLPE, if so nothing
* to do.
************************************/
pbe_pee( );
__enable_irq( );
}
}
/*******************************************************************************
*
* llwu_configure -
*
* description: Set up the LLWU for wakeup of the MCU from LLS and VLLSx modes
* from the selected pin or module.
*
* inputs: pin_en - indicates the wakeup pin is enabled.
* rise_fall - 0x00 = External input disabled as wakeup
* 0x01 - External input enabled as rising edge detection
* 0x02 - External input enabled as falling edge detection
* 0x03 - External input enabled as any edge detection
* module_en - indicates the wakeup module is enabled.
*******************************************************************************/
void llwu_configure(uint32_t pin_en, uint8_t rise_fall, uint32_t module_en ) {
llwu_clear_flags();
if (pin_en != 0) {
//------------------------------------------------
LLWU_PE1 = 0;
if (pin_en & LLWU_PIN_26) {
LLWU_PE1 |= LLWU_PE1_WUPE0(rise_fall);
}
if (pin_en & LLWU_PIN_33) {
LLWU_PE1 |= LLWU_PE1_WUPE3(rise_fall);
}
//------------------------------------------------
LLWU_PE2 = 0;
if( pin_en & LLWU_PIN_4) {
LLWU_PE2 |= LLWU_PE2_WUPE4(rise_fall);
}
if( pin_en & LLWU_PIN_16) { //TSI enabled
LLWU_PE2 |= LLWU_PE2_WUPE5(rise_fall);
}
if( pin_en & LLWU_PIN_22) {// TSI ensbled
LLWU_PE2 |= LLWU_PE2_WUPE6(rise_fall);
}
if( pin_en & LLWU_PIN_9) {
LLWU_PE2 |= LLWU_PE2_WUPE7(rise_fall);
}
//------------------------------------------------
LLWU_PE3 = 0;
if( pin_en & LLWU_PIN_10) {
LLWU_PE3 |= LLWU_PE3_WUPE8(rise_fall);
}
if( pin_en & LLWU_PIN_13) {
LLWU_PE3 |= LLWU_PE3_WUPE9(rise_fall);
}
if( pin_en & LLWU_PIN_11) {
LLWU_PE3 |= LLWU_PE3_WUPE10(rise_fall);
}
if( pin_en & LLWU_PIN_30) {
LLWU_PE3 |= LLWU_PE3_WUPE11(rise_fall);
}
//------------------------------------------------
LLWU_PE4 = 0;
if( pin_en & LLWU_PIN_2) {
LLWU_PE4 |= LLWU_PE4_WUPE12(rise_fall);
}
if( pin_en & LLWU_PIN_7) {
LLWU_PE4 |= LLWU_PE4_WUPE13(rise_fall);
}
if( pin_en & LLWU_PIN_6) {
LLWU_PE4 |= LLWU_PE4_WUPE14(rise_fall);
}
if( pin_en & LLWU_PIN_21) {
LLWU_PE4 |= LLWU_PE4_WUPE15(rise_fall);
}
}
if (module_en != 0) {
//------------------------------------------------
LLWU_ME = 0;
if( module_en & LLWU_LPTMR_MOD) {
BITBAND_U8(LLWU_ME, WUME0_BIT) = 1;
//LLWU_ME |= LLWU_ME_WUME0_MASK;
}
if( module_en & LLWU_CMP0_MOD) {
BITBAND_U8(LLWU_ME, WUME1_BIT) = 1;
//LLWU_ME |= LLWU_ME_WUME1_MASK;
}
if( module_en & LLWU_CMP1_MOD) {
BITBAND_U8(LLWU_ME, WUME2_BIT) = 1;
//LLWU_ME |= LLWU_ME_WUME2_MASK;
}
if( module_en & LLWU_TSI_MOD) {
BITBAND_U8(LLWU_ME, WUME4_BIT) = 1;
//LLWU_ME |= LLWU_ME_WUME4_MASK;
}
if( module_en & LLWU_RTCA_MOD) {
BITBAND_U8(LLWU_ME, WUME5_BIT) = 1;
//LLWU_ME |= LLWU_ME_WUME5_MASK;
}
if( module_en & LLWU_RTCS_MOD) {
BITBAND_U8(LLWU_ME, WUME7_BIT) = 1;
//LLWU_ME |= LLWU_ME_WUME7_MASK;
}
return;
}
}
