int macroLoad(char *name, char *filepath)
{
node *codeTree;
int res;
rmMacro(name);
renameAllocation("newMacro","tmpSavenewMacro");
if ( (codeTree = loadMacro(filepath,NOSEARCH, &res)) )
{
saveMacro(name,codeTree,PERMANENT);
releaseAllWithId("newMacro");
renameAllocation("tmpSavenewMacro","newMacro");
return(0);
}
releaseAllWithId("newMacro");
renameAllocation("tmpSavenewMacro","newMacro");
return(-1);
}
extern QList<QSharedPointer<Macro> > loadFromFile(const QString &fileName)
{
QList<QSharedPointer<Macro> > result;
QFile f(fileName);
if (f.open(QIODevice::ReadOnly|QIODevice::Text)) {
QDomDocument doc;
doc.setContent(&f);
const QDomNodeList macros = doc.elementsByTagName("macro");
for (int i=0; i<macros.count(); i++) {
QSharedPointer<Macro> macro(new Macro());
if (loadMacro(macros.at(i).toElement(), macro)) {
result << macro;
}
}
f.close();
}
return result;
}
void AddFxContextMenu::fillMenus()
{
loadFxs();
loadMacro();
}
void startUp(void) {
char buffer[200];
char strCounts[20];
int key;
SetSystemClockRate(MAX_CLOCK_SPEED); // to speed up initial startup -- set CLOCK_RATE later
setDefaults();
setLED(LED_RED,FALSE); // red light can be left on after reprog restart
setLED(LED_GREEN,TRUE); // red light can be left on after reprog restart
//to stop user from wondering if power is on and possibly cycling too quickly,
playDing(); // it is important to play a sound immediately
key = keyCheck(1); // long keycheck
// voltage checks in SystemIntoUSB.c
if (key == KEY_STAR || key == KEY_MINUS) {
// allows USB device mode no matter what is on memory card
Snd_Stop();
SystemIntoUDisk(1);
loadConfigFile();
processInbox();
resetSystem();
} else if (key == KEY_PLUS) {
// outbox mode: copy outbox files to connecting device
loadConfigFile();
copyOutbox();
resetSystem();
}
// check for new firmware first, but don't flash if voltage is low
if(V_MIN_SDWRITE_VOLTAGE <= vCur_1) {
check_new_sd_flash();
}
if (loadConfigFile() == -1) // config.txt file not found
testPCB();
if (!SNexists())
logException(32,(const char *)"no serial number",SHUT_DOWN);
SysDisableWaitMode(WAITMODE_CHANNEL_A);
adjustVolume(NORMAL_VOLUME,FALSE,FALSE);
adjustSpeed(NORMAL_SPEED,FALSE);
loadDefaultPackage();
if (MACRO_FILE)
loadMacro();
loadSystemCounts();
systemCounts.powerUpNumber++;
if (systemCounts.powerUpNumber - systemCounts.lastLogErase > MAX_PWR_CYCLES_IN_LOG) {
systemCounts.lastLogErase = systemCounts.powerUpNumber;
clearStaleLog();
}
#ifndef TB_CAN_WAKE
resetRTC(); // reset before saving anything to disk and running macros
#endif
saveSystemCounts();
strcpy(buffer,"\x0d\x0a" "---------------------------------------------------\x0d\x0a");
strcat(buffer,getDeviceSN(1));
strcpy(strCounts,(char *)" counts:S");
longToDecimalString(systemCounts.powerUpNumber, strCounts+9, 4);
strcat(strCounts,(char *)"P");
longToDecimalString(systemCounts.packageNumber, strCounts+14, 4);
strcat(strCounts,(char *)"R");
longToDecimalString(systemCounts.revdPkgNumber, strCounts+19, 4);
strcat(buffer,strCounts);
strcat(buffer,"\x0d\x0a" "CYCLE "); //cycle number
longToDecimalString(systemCounts.powerUpNumber,(char *)(buffer+strlen(buffer)),4);
strcat(buffer,(const char *)" - version " VERSION);
logString(buffer,BUFFER);
#ifdef TB_CAN_WAKE
logRTC();
#endif
loadPackage(PKG_SYS,BOOT_PACKAGE);
SetSystemClockRate(CLOCK_RATE); // either set in config file or the default 48 MHz set at beginning of startUp()
mainLoop();
}
MainWindow::MainWindow(QDesktopWidget * d):QMainWindow()
{
this->setMinimumSize(d->availableGeometry().width()/1.15, d->availableGeometry().height()/1.25);
this->setDockNestingEnabled(false);
this->setDockOptions(NULL);
this->setCorner(Qt::TopLeftCorner, Qt::LeftDockWidgetArea);
this->setCorner(Qt::BottomLeftCorner, Qt::LeftDockWidgetArea);
this->setCorner(Qt::TopRightCorner, Qt::RightDockWidgetArea);
this->setCorner(Qt::BottomRightCorner, Qt::RightDockWidgetArea);
databackend=new DataBackend();
databackend->setDataInserter(new ChangeFactory(databackend));
databrowser=new DataBrowser(databackend,d);
dataeditor=new DataEditor(databackend,d);
QObject::connect(databrowser,SIGNAL(editObject(QString)),dataeditor,SLOT(loadObject(QString)));
QObject::connect(databrowser,SIGNAL(editForce(QString)),dataeditor,SLOT(loadForce(QString)));
QObject::connect(databrowser,SIGNAL(editMacro(QString)),dataeditor,SLOT(loadMacro(QString)));
QObject::connect(databrowser,SIGNAL(editConstant(QString)),dataeditor,SLOT(loadConstant(QString)));
QObject::connect(databrowser,SIGNAL(deleteObject(QString)),dataeditor,SLOT(loadBlank()));
QObject::connect(databrowser,SIGNAL(deleteForce(QString)),dataeditor,SLOT(loadBlank()));
QObject::connect(databrowser,SIGNAL(deleteMacro(QString)),dataeditor,SLOT(loadBlank()));
QObject::connect(databrowser,SIGNAL(deleteConstant(QString)),dataeditor,SLOT(loadBlank()));
simcontrol=new SimulationControl(databackend);
openglpane=new GLDrawPane(databackend,d);
timer = new QTimer(this);
connect(timer, SIGNAL(timeout()), openglpane, SLOT(updateGL()));
connect(qApp, SIGNAL(lastWindowClosed()),timer,SLOT(stop()));
timer -> start(15);
this->setCentralWidget(openglpane);
this->addDockWidget(Qt::RightDockWidgetArea, databrowser);
this->addDockWidget(Qt::RightDockWidgetArea, dataeditor);
this->addDockWidget(Qt::BottomDockWidgetArea, simcontrol);
QMenu * fileMenu = this->menuBar()->addMenu(tr("File"));
QMenu * newMenu=fileMenu->addMenu("New Project");
newMenu->addAction("Blank Project",databackend,SLOT(newFromBlank()),QKeySequence("Ctrl+N"));
newMenu->addAction("From Default",databackend,SLOT(newFromDefault()),QKeySequence("Ctrl+Shift+N"));
fileMenu->addAction("Open Project",databackend,SLOT(load()),QKeySequence("Ctrl+O"));
fileMenu->addAction("Save Project",databackend,SLOT(save()),QKeySequence("Ctrl+S"));
fileMenu->addAction("Save Project As",databackend,SLOT(saveAs()),QKeySequence("Ctrl+Shift+S"));
fileMenu->addAction("Exit",databackend, SLOT(quit()));
QMenu * editMenu = this->menuBar()->addMenu(tr("Edit"));
QAction * undo=databackend->getUndoStack()->createUndoAction(this);
undo->setShortcut(QKeySequence(QKeySequence::Undo));
editMenu->addAction(undo);
QAction * redo=databackend->getUndoStack()->createRedoAction(this);
redo->setShortcut(QKeySequence(QKeySequence::Redo));
editMenu->addAction(redo);
QMenu * viewMenu = this->menuBar()->addMenu(tr("View"));
QMenu * cameraMenu=viewMenu->addMenu("Camera Presets");
cameraMenu->addAction("Isometric",this,SLOT(view_setIsometric()));
cameraMenu->addAction("View XY Plane",this,SLOT(view_setXY()));
cameraMenu->addAction("View XZ Plane",this,SLOT(view_setXZ()));
cameraMenu->addAction("View YZ Plane",this,SLOT(view_setYZ()));
QMenu * zoomMenu=viewMenu->addMenu("Zoom");
QActionGroup * zoomGroup=new QActionGroup(NULL);
zoomGroup->addAction(zoomMenu->addAction("10%",this,SLOT(view_zoom10())))->setCheckable(true);
zoomGroup->addAction(zoomMenu->addAction("50%",this,SLOT(view_zoom50())))->setCheckable(true);
zoomGroup->addAction(zoomMenu->addAction("100%",this,SLOT(view_zoom100())))->setCheckable(true);
zoomGroup->addAction(zoomMenu->addAction("150%",this,SLOT(view_zoom150())))->setCheckable(true);
zoomGroup->addAction(zoomMenu->addAction("200%",this,SLOT(view_zoom200())))->setCheckable(true);
view_zoom50();
viewMenu->addSeparator();
viewMenu->addAction(databrowser->toggleViewAction());
viewMenu->addAction(dataeditor->toggleViewAction());
viewMenu->addAction(simcontrol->toggleViewAction());
QMenu * simulationMenu = this->menuBar()->addMenu(tr("Simulation"));
simulationMenu->addAction("Run",simcontrol->getStepEngine(),SLOT(startPull()),QKeySequence("Ctrl+R"));
simulationMenu->addAction("Pause",simcontrol->getStepEngine(),SLOT(stopPull()),QKeySequence("Ctrl+P"));
simulationMenu->addAction("Reset to Initial Conditions",databackend->getUndoStack(),SLOT(undo()),QKeySequence("Ctrl+Shift+R"));
QAction * a=simulationMenu->addAction("Warn Before Clearing Undo Stack");
a->setCheckable(true);
a->setChecked(true);
QObject::connect(a,SIGNAL(toggled(bool)),databackend,SLOT(setWarning(bool)));
QMenu * dataMenu = this->menuBar()->addMenu(tr("Data"));
dataMenu->addAction("Clear All Objects",databackend->getDataInserter(),SLOT(clearObjects()));
dataMenu->addAction("Clear All Forces",databackend->getDataInserter(),SLOT(clearForces()));
dataMenu->addAction("Clear All Macros",databackend->getDataInserter(),SLOT(clearMacros()));
dataMenu->addAction("Clear All Constants",databackend->getDataInserter(),SLOT(clearConstants()));
QMenu * helpMenu = this->menuBar()->addMenu(tr("Help"));
helpMenu->addAction("Manual",this,SLOT(showManual()));
helpMenu->addAction("About",this,SLOT(showAbout()));
}
/*--------------------------------------------------------------------------
|
| macroLd
|
| This command loads a macro into cache memory. If the macro
| of the same name already exists in the cache memory, it is first
| deleted before the new macro is loaded.
|
/+--------------------------------------------------------------------------*/
int macroLd(int argc, char *argv[], int retc, char *retv[])
{
int i;
node *codeTree;
int res;
int ret = 0;
if (argc == 1)
{ Werrprintf("Usage -- %s('macro1'[,'macro2',...])",argv[0]);
ABORT;
}
else
{
if (retc > 1)
WstoreMessageOn();
for (i=1;i<argc;i++)
{
TPRINT1("macroLd: removing macro \"%s\"\n",argv[i]);
rmMacro(argv[i]);
renameAllocation("newMacro","tmpSavenewMacro");
if (argv[i][0] == '/')
{
char *s;
s = strrchr(argv[i],'/');
rmMacro(s+1);
if ( (codeTree = loadMacro(argv[i],NOSEARCH, &res)) )
{
TPRINT1("macroLd: saving macro \"%s\"\n",s+1);
saveMacro(s+1,codeTree,PERMANENT);
ret = 1;
if (!retc)
Winfoprintf("Loaded macro '%s'",s+1);
else if (retc > 1)
sprintf(storeMessage,"Loaded macro '%s'",s+1);
}
}
else if ( (codeTree = loadMacro(argv[i],SEARCH, &res)) )
{
TPRINT1("macroLd: saving macro \"%s\"\n",argv[i]);
saveMacro(argv[i],codeTree,PERMANENT);
ret = 1;
if (!retc)
Winfoprintf("Loaded macro '%s'",argv[i]);
else if (retc > 1)
sprintf(storeMessage,"Loaded macro '%s'",argv[i]);
}
releaseAllWithId("newMacro");
renameAllocation("tmpSavenewMacro","newMacro");
}
if (retc)
{
retv[0] = intString( ret );
if (retc > 1)
{
retv[1] = newString(storeMessage);
WstoreMessageOff();
}
}
}
RETURN;
}
