static void
log_current_data(void)
{
response_t *r;
ecu_data_t *ep;
unsigned int i;
if (!global_logfp)
return;
log_timestamp("D");
fprintf(global_logfp, "MODE 1 DATA\n");
for (i=0, ep=ecu_info; i<ecu_count; i++, ep++) {
for (r = ep->mode1_data;
r < &ep->mode1_data[ARRAY_SIZE(ep->mode1_data)]; r++) {
log_response((int)i, r);
}
}
log_timestamp("D");
fprintf(global_logfp, "MODE 2 DATA\n");
for (i=0, ep=ecu_info; i<ecu_count; i++, ep++) {
for (r = ep->mode2_data;
r < &ep->mode2_data[ARRAY_SIZE(ep->mode2_data)]; r++) {
log_response((int)i, r);
}
}
}
int respond(struct session* ses, int code, const char* resp)
{
if (!ses || !resp) { errno = EFAULT; return -1; }
if (code < 0 || code > 999) { errno = EINVAL; return -1; }
// convert response code to text
char code_str[4];
code_str[0] = (code / 100) + '0'; code %= 100;
code_str[1] = (code / 10) + '0'; code %= 10;
code_str[2] = code + '0';
code_str[3] = '\0';
int len = strlen(resp); if (len < 4) len = 4;
char* buf = (char*)malloc((2 * len + 1) * sizeof(char));
if (!buf) return -1;
// count lines in response
int lines = 1; const char* p;
for (p = resp; *p; ++p)
if (*p == '\n') ++lines;
// response format requires having a correct prefixing of response lines:
// - for single line: code + space
// - for multiline: code + dash in first line, space in following ones, code + space on last line
int i, j = 0;
for (i = 0; i < lines; ++i)
{
if (i == 0 || i + 1 == lines)
{
strcpy (buf + j, code_str); j += strlen(code_str);
buf[j++] = (i == 0 && lines > 1 ? '-' : ' ');
}
else buf[j++] = ' ';
for (; *resp && *resp != '\n'; ++resp)
buf[j++] = *resp;
buf[j++] = '\n';
++resp; // jump through \n in response
}
buf[j] = '\0'; // this \0 goes to log but not to client
if (write_data(ses->control_socket, buf, (size_t)j) < 0)
{
if (errno == EPIPE || errno == ECONNRESET) ses->terminated = 1;
else return -1;
}
if (log_response(ses, buf) == -1) return -1;
free (buf);
return 0;
}
UINT8 threecom3c505_device::read_command_port()
{
UINT8 data;
// the interrupt request is cleared when the Command Register is read
set_interrupt(CLEAR_LINE);
if (m_response_index == 0)
{
data = m_response.command;
}
else if (m_response_index == 1)
{
data = m_response.length;
}
else if (m_response_index < m_response_length)
{
data = m_response.data.raw[m_response_index - 2];
}
else if (m_response_index == m_response_length)
{
data = m_response.length + 2;
}
else if (m_response_index == m_response_length + 1 /*&& m_microcode_running*/)
{
// FIXME: special for SR10.4 microcode, content doesn't matter?
data = 0; // ?
m_response_index++;
m_status &= ~ACRF; /* the adapter command register is no longer full */
LOG2(("read_command_port: !!! reading 3C505 Command Register = %02x - m_status=%02x m_control=%02x",
data, m_status, m_control));
// wait for nak in control register
set_command_pending(2);
}
else
{
// should never happen
data = 0; // 0xff;
LOG(("read_command_port: unexpected reading Command Register at index %04x", m_response_index));
}
if (m_response_index <= m_response_length + 1)
{
if (++m_response_index == m_response_length)
{
m_status = (m_status & ~ASF_PCB_MASK) | ASF_PCB_END;
}
else if (m_response_index == m_response_length + 1)
{
log_response();
switch (m_response.command)
{
case CMD_MC_E1_RESPONSE:
m_status |= HRDY; /* data register ready */
// prepend data length
m_rx_data_index = -2;
break;
case CMD_RECEIVE_PACKET_COMPLETE:
m_status |= HRDY; /* data register ready */
m_rx_data_index = 0;
break;
case CMD_TRANSMIT_PACKET_COMPLETE:
case CMD_TRANSMIT_PACKET_18_COMPLETE:
m_netstat.tot_xmit++;
if (!send(m_tx_data_buffer.get_data(), m_tx_data_buffer.get_length()))
{
// FIXME: failed to send the Ethernet packet
LOG(("read_command_port(): !!! failed to send Ethernet packet"));
}
if (tx_data != NULL && //
(*tx_data)(this, m_tx_data_buffer.get_data(), m_tx_data_buffer.get_length()) == 0)
{
// FIXME: failed to transmit the Ethernet packet
LOG(("read_command_port(): !!! failed to transmit Ethernet packet"));
}
m_tx_data_buffer.reset();
if (m_command_buffer[0] != CMD_TRANSMIT_PACKET_F9)
{
set_command_pending(2);
}
break;
case CMD_DOWNLOAD_PROGRAM_RESPONSE:
m_program_buffer.reset();
set_command_pending(2);
break;
default:
set_command_pending(2);
break;
}
}
}
return data;
}
UINT8 threecom3c505_device::read_command_port()
{
UINT8 data;
if (m_response_index == 0)
{
// set_command_pending(1);
data = m_response.command;
}
else if (m_response_index == 1)
{
data = m_response.length;
}
else if (m_response_index < m_response_length)
{
data = m_response.data.raw[m_response_index - 2];
}
else if (m_response_index == m_response_length)
{
data = m_response.length + 2;
}
else if (m_response_index == m_response_length+1 /*&& m_microcode_running*/)
{
// FIXME: special for SR10.4 microcode, content doesn't matter?
data = 0; // ?
m_response_index++;
m_status &= ~ACRF; /* adapter command register no longer full */
LOG2(("FIXME: reading 3C505 Command Register at offset %02x with index %02x = %02x",
PORT_COMMAND, m_response_index, data));
if (m_mc_f9_pending == 1)
{
m_mc_f9_pending++;
}
}
else
{
// should never happen
data = 0; // 0xff;
LOG(("UNEXPECTED: reading 3C505 Command Register at offset %02x = %02x", PORT_COMMAND, data));
}
if (m_response_index <= m_response_length + 1)
{
if (++m_response_index == m_response_length)
{
m_status = (m_status & ~ASF_PCB_MASK) | ASF_PCB_END;
}
else if (m_response_index == m_response_length + 1)
{
// FIXME:
if (!(m_status & DIR_))
{
m_status &= ~HRDY; /* data register no longer ready */
}
log_response();
switch (m_response.command)
{
case CMD_MC_E1_RESPONSE:
m_status |= HRDY; /* data register ready */
// prepend data length
m_rx_data_index = -2;
break;
case CMD_RECEIVE_PACKET_COMPLETE:
m_status |= HRDY; /* data register ready */
m_rx_data_index = 0;
break;
case CMD_TRANSMIT_PACKET_COMPLETE:
case CMD_TRANSMIT_PACKET_18_COMPLETE:
m_netstat.tot_xmit++;
if(!send(m_tx_data_buffer.get_data(), m_tx_data_buffer.get_length()))
{
// FIXME: failed to send the ethernet packet
LOG(("read_command_port(): failed to send ethernet packet"));
}
if (tx_data != NULL && //
(*tx_data)(this, m_tx_data_buffer.get_data(), m_tx_data_buffer.get_length()) == 0)
{
// FIXME: failed to transmit the ethernet packet
LOG(("read_command_port(): failed to transmit ethernet packet"));
}
m_tx_data_buffer.reset();
if (m_command_buffer[0] != CMD_MC_F9)
{
// set_command_pending(0);
m_wait_for_ack = 1;
}
break;
case CMD_DOWNLOAD_PROGRAM_RESPONSE:
m_program_buffer.reset();
// set_command_pending(0);
m_wait_for_ack = 1;
break;
default:
// set_command_pending(0);
m_wait_for_ack = 1;
break;
}
}
}
return data;
}
