int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP Web Server Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2016 Oryx Embedded SARL\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: SAM7SE512\r\n");
TRACE_INFO("\r\n");
//Configure I/Os
ioInit();
//Generate a random seed
//PRNG initialization
error = yarrowInit(&yarrowContext);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize PRNG!\r\n");
}
//Properly seed the PRNG
error = yarrowSeed(&yarrowContext, seed, sizeof(seed));
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to seed PRNG!\r\n");
}
//TCP/IP stack initialization
error = netInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
netSetInterfaceName(interface, "eth0");
//Set host name
netSetHostname(interface, "WebServerDemo");
//Select the relevant network adapter
netSetDriver(interface, &dm9000Driver);
//Set external interrupt line driver
netSetExtIntDriver(interface, &extIntDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
netSetMacAddr(interface, &macAddr);
//Initialize network interface
error = netConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, 0, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, 0, &ipv6Addr);
//Set default router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetDefaultRouter(interface, 0, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Get default settings
httpServerGetDefaultSettings(&httpServerSettings);
//Bind HTTP server to the desired interface
httpServerSettings.interface = &netInterface[0];
//Listen to port 80
httpServerSettings.port = HTTP_PORT;
//Client connections
httpServerSettings.maxConnections = APP_HTTP_MAX_CONNECTIONS;
httpServerSettings.connections = httpConnections;
//Specify the server's root directory
strcpy(httpServerSettings.rootDirectory, "/www/");
//Set default home page
strcpy(httpServerSettings.defaultDocument, "index.shtm");
//Callback functions
httpServerSettings.authCallback = httpServerAuthCallback;
httpServerSettings.cgiCallback = httpServerCgiCallback;
httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;
//HTTP server initialization
error = httpServerInit(&httpServerContext, &httpServerSettings);
//Failed to initialize HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize HTTP server!\r\n");
}
//Start HTTP server
error = httpServerStart(&httpServerContext);
//Failed to start HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start HTTP server!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Update system core clock
SystemCoreClockUpdate();
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: MK60N512MD100\r\n");
TRACE_INFO("\r\n");
//Configure I/Os
ioInit();
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
tcpIpStackSetInterfaceName(interface, "eth0");
//Set host name
tcpIpStackSetHostname(interface, "FTPClientDemo");
//Select the relevant network adapter
tcpIpStackSetDriver(interface, &mk60EthDriver);
tcpIpStackSetPhyDriver(interface, &ksz8041PhyDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
tcpIpStackSetMacAddr(interface, &macAddr);
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("******************************\r\n");
TRACE_INFO("*** CycloneSSL Client Demo ***\r\n");
TRACE_INFO("******************************\r\n");
TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: AT32UC3A0512\r\n");
TRACE_INFO("\r\n");
//Configure I/Os
ioInit();
//Initialize LCD display
/*GLCD_Init();
GLCD_SetBackColor(Blue);
GLCD_SetTextColor(White);
GLCD_Clear(Blue);*/
//Welcome message
lcdSetCursor(0, 0);
printf("SSL Client Demo\r\n");
//Generate a random seed
//PRNG initialization
error = yarrowInit(&yarrowContext);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize PRNG!\r\n");
}
//Properly seed the PRNG
error = yarrowSeed(&yarrowContext, seed, sizeof(seed));
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to seed PRNG!\r\n");
}
//Debug message
TRACE_INFO("Loading credentials...\r\n");
//Start of exception handling block
do
{
//Load trusted CA certificates
error = resGetData(APP_CA_CERT_BUNDLE, (uint8_t **) &trustedCaList, &trustedCaListLength);
//Any error to report?
if(error) break;
//Load client's certificate
error = resGetData(APP_CLIENT_CERT, (uint8_t **) &clientCert, &clientCertLength);
//Any error to report?
if(error) break;
//Load client's private key
error = resGetData(APP_CLIENT_PRIVATE_KEY, (uint8_t **) &clientPrivateKey, &clientPrivateKeyLength);
//Any error to report?
if(error) break;
//End of exception handling block
} while(0);
//Check error code
if(error)
{
//Debug message
TRACE_ERROR("Failed to load credentials!\r\n");
}
//TCP/IP stack initialization
error = netInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
netSetInterfaceName(interface, "eth0");
//Set host name
netSetHostname(interface, "SSLClientDemo");
//Select the relevant network adapter
netSetDriver(interface, &avr32EthDriver);
netSetPhyDriver(interface, &dp83848PhyDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
netSetMacAddr(interface, &macAddr);
//Initialize network interface
error = netConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Create user task
task = osCreateTask("User Task", userTask, NULL, 850, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//MPU configuration
MPU_Config();
//HAL library initialization
HAL_Init();
//Configure the system clock
SystemClock_Config();
//Enable I-cache and D-cache
SCB_EnableICache();
SCB_EnableDCache();
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: STM32F746\r\n");
TRACE_INFO("\r\n");
//LED configuration
BSP_LED_Init(LED1);
//Clear LEDs
BSP_LED_Off(LED1);
//Initialize user button
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
//Initialize LCD display
BSP_LCD_Init();
BSP_LCD_LayerDefaultInit(0, LCD_FRAME_BUFFER_LAYER0);
BSP_LCD_SelectLayer(0);
BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetFont(&Font24);
BSP_LCD_DisplayOn();
//Clear LCD display
BSP_LCD_Clear(LCD_COLOR_BLUE);
//Welcome message
lcdSetCursor(0, 0);
printf("FTP Client Demo\r\n");
//TCP/IP stack initialization
error = netInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
netSetInterfaceName(interface, "eth0");
//Set host name
netSetHostname(interface, "FTPClientDemo");
//Select the relevant network adapter
netSetDriver(interface, &stm32f7xxEthDriver);
netSetPhyDriver(interface, &lan8742PhyDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
netSetMacAddr(interface, &macAddr);
//Initialize network interface
error = netConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP Web Server Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: STM32F407\r\n");
TRACE_INFO("\r\n");
//Configure I/Os
ioInit();
//Initialize LCD display
STM32f4_Discovery_LCD_Init();
LCD_SetBackColor(Blue);
LCD_SetTextColor(White);
LCD_SetFont(&Font16x24);
LCD_Clear(Blue);
//Welcome message
lcdSetCursor(0, 0);
printf("Web Server Demo");
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
tcpIpStackSetInterfaceName(interface, "eth0");
//Set host name
tcpIpStackSetHostname(interface, "WebServerDemo");
//Select the relevant network adapter
tcpIpStackSetDriver(interface, &stm32f4x7EthDriver);
tcpIpStackSetPhyDriver(interface, &lan8720PhyDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
tcpIpStackSetMacAddr(interface, &macAddr);
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Get default settings
httpServerGetDefaultSettings(&httpServerSettings);
//Bind HTTP server to the desired interface
httpServerSettings.interface = &netInterface[0];
//Listen to port 80
httpServerSettings.port = HTTP_PORT;
//Specify the server's root directory
strcpy(httpServerSettings.rootDirectory, "/www/");
//Set default home page
strcpy(httpServerSettings.defaultDocument, "index.shtm");
//Callback functions
httpServerSettings.cgiCallback = httpServerCgiCallback;
httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;
//HTTP server initialization
error = httpServerInit(&httpServerContext, &httpServerSettings);
//Failed to initialize HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize HTTP server!\r\n");
}
//Start HTTP server
error = httpServerStart(&httpServerContext);
//Failed to start HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start HTTP server!\r\n");
}
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP FTP Server Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: STM32F407\r\n");
TRACE_INFO("\r\n");
//LED configuration
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
//Clear LEDs
STM_EVAL_LEDOff(LED1);
STM_EVAL_LEDOff(LED2);
STM_EVAL_LEDOff(LED3);
STM_EVAL_LEDOff(LED4);
//Initialize I/O expander
IOE_Config();
//Initialize user button
STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);
//Initialize LCD display
STM324xG_LCD_Init();
LCD_SetBackColor(Blue);
LCD_SetTextColor(White);
LCD_SetFont(&Font16x24);
LCD_Clear(Blue);
//Welcome message
lcdSetCursor(0, 0);
printf("FTP Server Demo");
//File system initialization
error = fsInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize file system!\r\n");
}
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
tcpIpStackSetInterfaceName(interface, "eth0");
//Set host name
tcpIpStackSetHostname(interface, "FTPServerDemo");
//Select the relevant network adapter
tcpIpStackSetDriver(interface, &stm32f4x7EthDriver);
tcpIpStackSetPhyDriver(interface, &dp83848PhyDriver);
//Set external interrupt line driver
tcpIpStackSetExtIntDriver(interface, &extIntDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
tcpIpStackSetMacAddr(interface, &macAddr);
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Get default settings
ftpServerGetDefaultSettings(&ftpServerSettings);
//Bind FTP server to the desired interface
ftpServerSettings.interface = &netInterface[0];
//Listen to port 21
ftpServerSettings.port = FTP_PORT;
//Root directory
strcpy(ftpServerSettings.rootDir, "/");
//User verification callback function
ftpServerSettings.checkUserCallback = ftpServerCheckUserCallback;
//Password verification callback function
ftpServerSettings.checkPasswordCallback = ftpServerCheckPasswordCallback;
//Callback used to retrieve file permissions
ftpServerSettings.getFilePermCallback = ftpServerGetFilePermCallback;
//FTP server initialization
error = ftpServerInit(&ftpServerContext, &ftpServerSettings);
//Failed to initialize FTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize FTP server!\r\n");
}
//Start FTP server
error = ftpServerStart(&ftpServerContext);
//Failed to start FTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start FTP server!\r\n");
}
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
error_t httpServerProcessSetConfig(HttpConnection *connection)
{
error_t error;
uint_t i;
size_t n;
char_t *p;
char_t *buffer;
char_t *separator;
char_t *property;
char_t *value;
Settings *newSettings;
//Point to the scratch buffer
buffer = connection->buffer;
//Allocate a memory buffer to hold the new configuration
newSettings = osAllocMem(sizeof(Settings));
//Failed to allocate memory?
if(!newSettings) return ERROR_OUT_OF_MEMORY;
//Start of exception handling block
do
{
//Retrieve default settings
error = getDefaultSettings(newSettings);
//Any error to report?
if(error) break;
//Process HTTP request body
while(1)
{
//Read the HTTP request body until an ampersand is encountered
error = httpReadStream(connection, buffer,
HTTP_SERVER_BUFFER_SIZE - 1, &n, HTTP_FLAG_BREAK('&'));
//End of stream detected?
if(error) break;
//Properly terminate the string with a NULL character
buffer[n] = '\0';
//Remove the trailing ampersand
if(n > 0 && buffer[n - 1] == '&')
buffer[--n] = '\0';
//Decode the percent-encoded string
error = httpDecodePercentEncodedString(buffer, buffer, HTTP_SERVER_BUFFER_SIZE);
//Any error detected?
if(error) break;
//Check whether a separator is present
separator = strchr(buffer, '=');
//Separator found?
if(separator)
{
//Split the line
*separator = '\0';
//Get property name and value
property = strTrimWhitespace(buffer);
value = strTrimWhitespace(separator + 1);
//Debug message
TRACE_DEBUG("[%s]=%s\r\n", property, value);
//Icecast settings
if(!strcasecmp(property, "icecastSettingsUrl"))
{
//Check resource length
if(strlen(value) >= sizeof(newSettings->icecast.url))
{
//Report an error
error = ERROR_INVALID_SYNTAX;
break;
}
//Save resource
strcpy(newSettings->icecast.url, value);
}
else if(!strcasecmp(property, "icecastSettingsPort"))
{
//Save Icecast server port
newSettings->icecast.port = strtoul(value, &p, 10);
//Invalid port number?
if(*p != '\0')
{
//Report an error
error = ERROR_INVALID_SYNTAX;
break;
}
}
//LAN settings
else if(!strcasecmp(property, "lanSettingsMacAddr"))
{
//Save MAC address
error = macStringToAddr(value, &newSettings->lan.macAddr);
//Invalid address?
if(error) break;
}
else if(!strcasecmp(property, "lanSettingsHostName"))
{
//Check the length of the host name
if(strlen(value) >= sizeof(newSettings->lan.hostname))
{
//Report an error
error = ERROR_INVALID_SYNTAX;
break;
}
//Save host name
strcpy(newSettings->lan.hostname, value);
}
else if(!strcasecmp(property, "lanSettingsEnableDhcp"))
{
//Check flag value
if(!strcasecmp(value, "off"))
{
//DHCP client is disabled
newSettings->lan.enableDhcp = FALSE;
}
else if(!strcasecmp(value, "on"))
{
//DHCP client is enabled
newSettings->lan.enableDhcp = TRUE;
}
else
{
//Invalid value
error = ERROR_INVALID_SYNTAX;
break;
}
}
else if(!strcasecmp(property, "lanSettingsHostAddr"))
{
//Save IPv4 host address
error = ipv4StringToAddr(value, &newSettings->lan.hostAddr);
//Invalid address?
if(error) break;
}
else if(!strcasecmp(property, "lanSettingsSubnetMask"))
{
//Save subnet mask
error = ipv4StringToAddr(value, &newSettings->lan.subnetMask);
//Invalid mask?
if(error) break;
}
else if(!strcasecmp(property, "lanSettingsDefaultGateway"))
{
//Save default gateway
error = ipv4StringToAddr(value, &newSettings->lan.defaultGateway);
//Invalid address?
if(error) break;
}
else if(!strcasecmp(property, "lanSettingsPrimaryDns"))
{
//Save primary DNS
error = ipv4StringToAddr(value, &newSettings->lan.primaryDns);
//Invalid address?
if(error) break;
}
else if(!strcasecmp(property, "lanSettingsSecondaryDns"))
{
//Save secondary DNS
error = ipv4StringToAddr(value, &newSettings->lan.secondaryDns);
//Invalid address?
if(error) break;
}
//Proxy settings
else if(!strcasecmp(property, "proxySettingsEnable"))
{
//Check flag value
if(!strcasecmp(value, "off"))
{
//Proxy server is disabled
newSettings->proxy.enable = FALSE;
}
else if(!strcasecmp(value, "on"))
{
//Proxy server is enabled
newSettings->proxy.enable = TRUE;
}
else
{
//Invalid value
error = ERROR_INVALID_SYNTAX;
break;
}
}
else if(!strcasecmp(property, "proxySettingsName"))
{
//Check the length of proxy server name
if(strlen(value) >= sizeof(newSettings->proxy.name))
{
//Report an error
error = ERROR_INVALID_SYNTAX;
break;
}
//Save proxy server name
strcpy(newSettings->proxy.name, value);
}
else if(!strcasecmp(property, "proxySettingsPort"))
{
//Save proxy server port
newSettings->proxy.port = strtoul(value, &p, 10);
//Invalid port number?
if(*p != '\0')
{
//Report an error
error = ERROR_INVALID_SYNTAX;
break;
}
}
}
}
//Check status code
if(error == NO_ERROR || error == ERROR_END_OF_STREAM)
{
//Commit changes
appSettings = *newSettings;
//Write settings to non-volatile memory
error = saveSettings(newSettings);
}
else if(error != ERROR_INVALID_SYNTAX)
{
//Propagate exception
break;
}
//Point to the scratch buffer
buffer = connection->buffer + 384;
//Format XML data
n = sprintf(buffer, "<data>\r\n <status>");
if(error == ERROR_INVALID_SYNTAX)
n += sprintf(buffer + n, "Invalid configuration!\r\n");
else if(error != NO_ERROR)
n += sprintf(buffer + n, "Failed to save settings to non-volatile memory!\r\n");
else
n += sprintf(buffer + n, "Settings successfully saved. Please reboot the board.\r\n");
//Terminate XML data
n += sprintf(buffer + n, "</status>\r\n</data>\r\n");
//Format HTTP response header
connection->response.version = connection->request.version;
connection->response.statusCode = 200;
connection->response.keepAlive = connection->request.keepAlive;
connection->response.noCache = TRUE;
connection->response.contentType = mimeGetType(".xml");
connection->response.chunkedEncoding = FALSE;
connection->response.contentLength = n;
//Send the header to the client
error = httpWriteHeader(connection);
//Any error to report?
if(error) break;
//Send response body
error = httpWriteStream(connection, buffer, n);
//Any error to report?
if(error) break;
//Properly close output stream
error = httpCloseStream(connection);
//Any error to report?
if(error) break;
//End of exception handling block
} while(0);
//Free previously allocated memory
osFreeMem(newSettings);
//Return status code
return error;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: RX63N\r\n");
TRACE_INFO("\r\n");
//Configure I/Os
ioInit();
//Initialize RSPI channel
R_RSPI_Init(RSPI_CHANNEL_0);
//Initialize LCD display
GlyphOpen(&lcdHandle, 0);
GlyphNormalScreen(lcdHandle);
GlyphSetFont(lcdHandle, GLYPH_FONT_6_BY_13);
//Clear display
GlyphClearScreen(lcdHandle);
//Welcome message
lcdSetCursor(0, 0);
printf("FTP Client\r\nDemo\r\n");
//TCP/IP stack initialization
error = netInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
netSetInterfaceName(interface, "eth0");
//Set host name
netSetHostname(interface, "FTPClientDemo");
//Select the relevant network adapter
netSetDriver(interface, &rx63nEthDriver);
netSetPhyDriver(interface, &dp83620PhyDriver);
//Set external interrupt line driver
netSetExtIntDriver(interface, &extIntDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
netSetMacAddr(interface, &macAddr);
//Initialize network interface
error = netConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Enable interrupts
__enable_interrupt();
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Update system core clock
sysclk_init();
board_init();
// Initialize interrupt vector table support.
irq_initialize_vectors();
// Enable interrupts
cpu_irq_enable();
/* Call a local utility routine to initialize C-Library Standard I/O over
* a USB CDC protocol. Tunable parameters in a conf_usb.h file must be
* supplied to configure the USB device correctly.
*/
stdio_usb_init();
//Initialize kernel
osInitKernel();
//Configure debug UART
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP Web Server Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: SAM4E\r\n");
TRACE_INFO("\r\n");
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
tcpIpStackSetInterfaceName(interface, "eth0");
//Set host name
tcpIpStackSetHostname(interface, "WebServerDemo");
//Select the relevant network adapter
tcpIpStackSetDriver(interface, &sam4eEthDriver);
tcpIpStackSetPhyDriver(interface, &ksz8081PhyDriver);
//Set external interrupt line driver
tcpIpStackSetExtIntDriver(interface, &extIntDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
tcpIpStackSetMacAddr(interface, &macAddr);
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Get default settings
httpServerGetDefaultSettings(&httpServerSettings);
//Bind HTTP server to the desired interface
httpServerSettings.interface = &netInterface[0];
//Listen to port 80
httpServerSettings.port = HTTP_PORT;
//Specify the server's root directory
strcpy(httpServerSettings.rootDirectory, "/www/");
//Set default home page
strcpy(httpServerSettings.defaultDocument, "index.shtm");
//Callback functions
httpServerSettings.authCallback = httpServerAuthCallback;
httpServerSettings.cgiCallback = httpServerCgiCallback;
httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;
//HTTP server initialization
error = httpServerInit(&httpServerContext, &httpServerSettings);
//Failed to initialize HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize HTTP server!\r\n");
}
//Start HTTP server
error = httpServerStart(&httpServerContext);
//Failed to start HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start HTTP server!\r\n");
}
//Start TCP echo service
error = tcpEchoStart();
//Failed to TCP echo service?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start TCP echo service!\r\n");
}
//Start UDP echo service
error = udpEchoStart();
//Failed to TCP echo service?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start UDP echo service!\r\n");
}
//Start TCP discard service
error = tcpDiscardStart();
//Failed to TCP echo service?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start TCP discard service!\r\n");
}
//Start UDP discard service
error = udpDiscardStart();
//Failed to TCP echo service?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start UDP discard service!\r\n");
}
//Start TCP chargen service
error = tcpChargenStart();
//Failed to TCP echo service?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start TCP chargen service!\r\n");
}
//Start UDP chargen service
error = udpChargenStart();
//Failed to TCP echo service?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start UDP chargen service!\r\n");
}
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
static DhcpClientSettings dhcpClientSettings;
static DhcpClientCtx dhcpClientContext;
//Update system core clock
SystemCoreClockUpdate();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2013 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: SAM4E\r\n");
TRACE_INFO("\r\n");
//IO configuration
ioInit();
//Initialize LCD display
GLCD_Init();
GLCD_SetBackColor(Blue);
GLCD_SetTextColor(White);
GLCD_Clear(Blue);
//Welcome message
lcdSetCursor(0, 0);
printf("FTP Client Demo\r\n");
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Select the relevant network adapter
interface->nicDriver = &sam4eEthDriver;
interface->phyDriver = &ksz8051PhyDriver;
//Interface name
strcpy(interface->name, "eth0");
//Set host MAC address
macStringToAddr("00-AB-CD-EF-04-16", &interface->macAddr);
#if (IPV6_SUPPORT == ENABLED)
//Set link-local IPv6 address
ipv6StringToAddr("fe80::00ab:cdef:0416", &interface->ipv6Config.linkLocalAddr);
#endif
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if 1
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = &netInterface[0];
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext, &dhcpClientSettings);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Manual configuration
interface = &netInterface[0];
//IPv4 address
ipv4StringToAddr("192.168.0.20", &interface->ipv4Config.addr);
//Subnet mask
ipv4StringToAddr("255.255.255.0", &interface->ipv4Config.subnetMask);
//Default gateway
ipv4StringToAddr("192.168.0.254", &interface->ipv4Config.defaultGateway);
//Primary and secondary DNS servers
interface->ipv4Config.dnsServerCount = 2;
ipv4StringToAddr("212.27.40.240", &interface->ipv4Config.dnsServer[0]);
ipv4StringToAddr ("212.27.40.241", &interface->ipv4Config.dnsServer[1]);
#endif
//Create user task
task = osTaskCreate("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osTaskCreate("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStart();
//This function should never return
return 0;
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
#if USE_DHCP
static DhcpClientSettings dhcpClientSettings;
static DhcpClientCtx dhcpClientContext;
#endif
static HttpServerSettings httpServerSettings;
static HttpServerContext httpServerContext;
SystemInit();
//Configure debug UART
debugInit();
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("***********************************\r\n");
TRACE_INFO("*** CycloneTCP HTTP Client Demo ***\r\n");
TRACE_INFO("***********************************\r\n");
TRACE_INFO("Copyright: 2010-2013 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: STM32F407\r\n");
TRACE_INFO("\r\n");
//LED configuration
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
STM_EVAL_LEDInit(LED5);
STM_EVAL_LEDInit(LED6);
//Clear LEDs
STM_EVAL_LEDOff(LED3);
STM_EVAL_LEDOff(LED4);
STM_EVAL_LEDOff(LED5);
STM_EVAL_LEDOff(LED6);
//Initialize user button
STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
//PRNG initialization
error = yarrowInit(&yarrowContext);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize PRNG!\r\n");
}
//Generate a random seed
//Properly seed the PRNG
error = yarrowSeed(&yarrowContext, seed, sizeof(seed));
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to seed PRNG!\r\n");
}
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Select the relevant network adapter
interface->nicDriver = &stm32f4x7EthDriver;
interface->phyDriver = &dp83848PhyDriver;
//Interface name
strcpy(interface->name, "eth0");
//Set host MAC address
macStringToAddr("00-AB-CD-EF-04-07", &interface->macAddr);
#if (IPV6_SUPPORT == ENABLED)
//Set link-local IPv6 address
ipv6StringToAddr("fe80::00ab:cdef:0407", &interface->ipv6Config.linkLocalAddr);
#endif
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if USE_DHCP
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = &netInterface[0];
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext, &dhcpClientSettings);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Manual configuration
interface = &netInterface[0];
//IPv4 address
ipv4StringToAddr(IPV4_STATIC_IP, &interface->ipv4Config.addr);
//Subnet mask
ipv4StringToAddr(IPV4_STATIC_MASK, &interface->ipv4Config.subnetMask);
//Default gateway
ipv4StringToAddr(IPV4_STATIC_GW, &interface->ipv4Config.defaultGateway);
//Primary and secondary DNS servers
interface->ipv4Config.dnsServerCount = 2;
ipv4StringToAddr(IPV4_STATIC_DNS0, &interface->ipv4Config.dnsServer[0]);
ipv4StringToAddr(IPV4_STATIC_DNS1, &interface->ipv4Config.dnsServer[1]);
#endif
//Bind HTTP server to the desired interface
httpServerSettings.interface = &netInterface[0];
//Listen to port 80
httpServerSettings.port = HTTP_PORT;
//Specify the server's root directory
strcpy(httpServerSettings.rootDirectory, "/www/");
//Set default home page
strcpy(httpServerSettings.defaultDocument, "index.shtm");
//Callback functions
httpServerSettings.cgiCallback = httpServerCgiCallback;
httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;
//Start HTTP server
error = httpServerStart(&httpServerContext, &httpServerSettings);
//Failed to start HTTP server?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start HTTP server!\r\n");
}
//Create user task
task = osTaskCreate("User Task", userTask, interface, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osTaskCreate("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStart();
//This function should never return
return 0;
}