//! \brief Test 20 - Test upstream resume (from USB device)
static void main_test20(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
main_usb_enum_step12();
main_usb_enum_step13();
main_usb_enum_step14();
// Setup set remotewakeup
main_usb_wait_setup_packet();
main_usb_send_in(NULL,0);
main_usb_wait_suspend();
delay_ms(100);
udd_initiate_remote_wake_up();
main_usb_wait_wakeup();
main_usb_wait_sof();
// Setup clear remotewakeup
main_usb_wait_setup_packet();
main_usb_send_in(NULL,0);
}
//! \brief Test 16 - Stall SET CONFIGURATION (with configuration in SELF + 300mA -> must be pass)
static void main_test16(void)
{
uint8_t nb_fail;
udd_attach_device();
nb_fail = 4;
while (nb_fail--) {
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
main_usb_enum_step12();
// Get configuration descriptor
main_usb_wait_setup_packet();
main_conf_desc.conf.bDescriptorType = USB_DT_CONFIGURATION;
main_conf_desc.conf.bMaxPower = USB_CONFIG_MAX_POWER(300),
main_conf_desc.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_CONFIG_ATTR_SELF_POWERED;
main_conf_desc.iface.bInterfaceProtocol = HID_PROTOCOL_MOUSE;
main_conf_desc.ep.wMaxPacketSize = LE16(8);
main_usb_send_in((uint8_t*)&main_conf_desc, sizeof(main_conf_desc));
main_usb_wait_out(NULL,0);
// Set configuration
main_usb_wait_setup_packet();
main_usb_stall_after_setup_packet();
}
main_usb_wait_suspend();
main_detach();
}
//! \brief Test 15 - HID mouse with too large endpoint size (USBB hardware limit)
static void main_test15(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
main_usb_enum_step12();
// Get configuration descriptor
main_usb_wait_setup_packet();
main_conf_desc.conf.bDescriptorType = USB_DT_CONFIGURATION;
main_conf_desc.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
main_conf_desc.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
main_conf_desc.iface.bInterfaceProtocol = HID_PROTOCOL_MOUSE;
main_conf_desc.ep.wMaxPacketSize = LE16(1023);
main_usb_send_in((uint8_t*)&main_conf_desc, sizeof(main_conf_desc));
main_usb_wait_out(NULL,0);
main_usb_wait_suspend();
main_detach();
}
//! \brief Test 13 - To high power consumption in setup request get configuration 0
static void main_test13(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
// Get configuration descriptor
main_usb_wait_setup_packet();
main_conf_desc.conf.bDescriptorType = USB_DT_CONFIGURATION;
main_conf_desc.conf.bMaxPower = USB_CONFIG_MAX_POWER(300);
main_conf_desc.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
main_usb_send_in((uint8_t*)&main_conf_desc, sizeof(usb_conf_desc_t));
main_usb_wait_out(NULL,0);
main_usb_wait_suspend();
main_detach();
}
//! \brief Test 11 - Wrong value in first setup request get configuration 0
static void main_test11(void)
{
uint8_t nb_fail;
main_otg_init();
udd_attach_device();
nb_fail = 4;
while (nb_fail--) {
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
// Get configuration descriptor
main_usb_wait_setup_packet();
main_conf_desc.conf.bDescriptorType = 0xFF;
main_conf_desc.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER);
main_conf_desc.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
main_usb_send_in((uint8_t*)&main_conf_desc, sizeof(usb_conf_desc_t));
main_usb_wait_out(NULL,0);
}
main_usb_wait_suspend();
main_detach();
}
//! \brief Test 9 - Detach after reset after first setup request get descriptor
static void main_test9(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_wait_sof();
main_detach();
}
//! \brief Test 10 - No send ZLP (NAK IN) after second setup packet (set address)
static void main_test10(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enable_ctrl_ep(0, (speed==0)?8:64);
main_usb_wait_setup_packet();
main_usb_enum_step1();
main_usb_enum_step2();
main_detach();
}
//! \brief Test 17 - Enumeration success (with configuration in BUS + 100mA -> must be pass)
static void main_test17(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
main_usb_enum_step12();
main_usb_enum_step13();
main_usb_enum_step14();
}