/*
* ex_mark -- :mark char
* :k char
* Mark lines.
*
*
* PUBLIC: int ex_mark __P((SCR *, EXCMD *));
*/
int
ex_mark(SCR *sp, EXCMD *cmdp)
{
NEEDFILE(sp, cmdp);
if (cmdp->argv[0]->len != 1) {
msgq(sp, M_ERR, "136|Mark names must be a single character");
return (1);
}
return (mark_set(sp, cmdp->argv[0]->bp[0], &cmdp->addr1, 1));
}
/*
* ex_undo -- u
* Undo the last change.
*
* PUBLIC: int ex_undo __P((SCR *, EXCMD *));
*/
int
ex_undo(SCR *sp, EXCMD *cmdp)
{
EXF *ep;
MARK m;
/*
* !!!
* Historic undo always set the previous context mark.
*/
m.lno = sp->lno;
m.cno = sp->cno;
if (mark_set(sp, ABSMARK1, &m, 1))
return (1);
/*
* !!!
* Multiple undo isn't available in ex, as there's no '.' command.
* Whether 'u' is undo or redo is toggled each time, unless there
* was a change since the last undo, in which case it's an undo.
*/
ep = sp->ep;
if (!F_ISSET(ep, F_UNDO)) {
F_SET(ep, F_UNDO);
ep->lundo = FORWARD;
}
switch (ep->lundo) {
case BACKWARD:
if (log_forward(sp, &m))
return (1);
ep->lundo = FORWARD;
break;
case FORWARD:
if (log_backward(sp, &m))
return (1);
ep->lundo = BACKWARD;
break;
case NOTSET:
abort();
}
sp->lno = m.lno;
sp->cno = m.cno;
return (0);
}
/*
* ex_z -- :[line] z [^-.+=] [count] [flags]
* Adjust window.
*
* PUBLIC: int ex_z __P((SCR *, EXCMD *));
*/
int
ex_z(SCR *sp, EXCMD *cmdp)
{
MARK abs;
recno_t cnt, equals, lno;
int eofcheck;
NEEDFILE(sp, cmdp);
/*
* !!!
* If no count specified, use either two times the size of the
* scrolling region, or the size of the window option. POSIX
* 1003.2 claims that the latter is correct, but historic ex/vi
* documentation and practice appear to use the scrolling region.
* I'm using the window size as it means that the entire screen
* is used instead of losing a line to roundoff. Note, we drop
* a line from the cnt if using the window size to leave room for
* the next ex prompt.
*/
if (FL_ISSET(cmdp->iflags, E_C_COUNT))
cnt = cmdp->count;
else
#ifdef HISTORICAL_PRACTICE
cnt = O_VAL(sp, O_SCROLL) * 2;
#else
cnt = O_VAL(sp, O_WINDOW) - 1;
#endif
equals = 0;
eofcheck = 0;
lno = cmdp->addr1.lno;
switch (FL_ISSET(cmdp->iflags,
E_C_CARAT | E_C_DASH | E_C_DOT | E_C_EQUAL | E_C_PLUS)) {
case E_C_CARAT: /* Display cnt * 2 before the line. */
eofcheck = 1;
if (lno > cnt * 2)
cmdp->addr1.lno = (lno - cnt * 2) + 1;
else
cmdp->addr1.lno = 1;
cmdp->addr2.lno = (cmdp->addr1.lno + cnt) - 1;
break;
case E_C_DASH: /* Line goes at the bottom of the screen. */
cmdp->addr1.lno = lno > cnt ? (lno - cnt) + 1 : 1;
cmdp->addr2.lno = lno;
break;
case E_C_DOT: /* Line goes in the middle of the screen. */
/*
* !!!
* Historically, the "middleness" of the line overrode the
* count, so that "3z.19" or "3z.20" would display the first
* 12 lines of the file, i.e. (N - 1) / 2 lines before and
* after the specified line.
*/
eofcheck = 1;
cnt = (cnt - 1) / 2;
cmdp->addr1.lno = lno > cnt ? lno - cnt : 1;
cmdp->addr2.lno = lno + cnt;
/*
* !!!
* Historically, z. set the absolute cursor mark.
*/
abs.lno = sp->lno;
abs.cno = sp->cno;
(void)mark_set(sp, ABSMARK1, &abs, 1);
break;
case E_C_EQUAL: /* Center with hyphens. */
/*
* !!!
* Strangeness. The '=' flag is like the '.' flag (see the
* above comment, it applies here as well) but with a special
* little hack. Print out lines of hyphens before and after
* the specified line. Additionally, the cursor remains set
* on that line.
*/
eofcheck = 1;
cnt = (cnt - 1) / 2;
cmdp->addr1.lno = lno > cnt ? lno - cnt : 1;
cmdp->addr2.lno = lno - 1;
if (ex_pr(sp, cmdp))
return (1);
(void)ex_puts(sp, "----------------------------------------\n");
cmdp->addr2.lno = cmdp->addr1.lno = equals = lno;
if (ex_pr(sp, cmdp))
return (1);
(void)ex_puts(sp, "----------------------------------------\n");
cmdp->addr1.lno = lno + 1;
cmdp->addr2.lno = (lno + cnt) - 1;
break;
default:
/* If no line specified, move to the next one. */
if (F_ISSET(cmdp, E_ADDR_DEF))
++lno;
/* FALLTHROUGH */
case E_C_PLUS: /* Line goes at the top of the screen. */
eofcheck = 1;
cmdp->addr1.lno = lno;
cmdp->addr2.lno = (lno + cnt) - 1;
break;
}
if (eofcheck) {
if (db_last(sp, &lno))
return (1);
if (cmdp->addr2.lno > lno)
cmdp->addr2.lno = lno;
}
if (ex_pr(sp, cmdp))
return (1);
if (equals)
sp->lno = equals;
return (0);
}
/*
* api_setmark --
* Set the mark.
*
* PUBLIC: int api_setmark __P((SCR *, int, MARK *));
*/
int
api_setmark(SCR *sp, int markname, MARK *mp)
{
return (mark_set(sp, (ARG_CHAR_T)markname, mp, 1));
}
/*
* file_cinit --
* Set up the initial cursor position.
*/
static void
file_cinit(SCR *sp)
{
GS *gp;
MARK m;
size_t len;
int nb;
CHAR_T *wp;
size_t wlen;
/* Set some basic defaults. */
sp->lno = 1;
sp->cno = 0;
/*
* Historically, initial commands (the -c option) weren't executed
* until a file was loaded, e.g. "vi +10 nofile", followed by an
* :edit or :tag command, would execute the +10 on the file loaded
* by the subsequent command, (assuming that it existed). This
* applied as well to files loaded using the tag commands, and we
* follow that historic practice. Also, all initial commands were
* ex commands and were always executed on the last line of the file.
*
* Otherwise, if no initial command for this file:
* If in ex mode, move to the last line, first nonblank character.
* If the file has previously been edited, move to the last known
* position, and check it for validity.
* Otherwise, move to the first line, first nonblank.
*
* This gets called by the file init code, because we may be in a
* file of ex commands and we want to execute them from the right
* location in the file.
*/
nb = 0;
gp = sp->gp;
if (gp->c_option != NULL && !F_ISSET(sp->frp, FR_NEWFILE)) {
if (db_last(sp, &sp->lno))
return;
if (sp->lno == 0) {
sp->lno = 1;
sp->cno = 0;
}
CHAR2INT(sp, gp->c_option, strlen(gp->c_option) + 1,
wp, wlen);
if (ex_run_str(sp, "-c option", wp, wlen - 1, 1, 1))
return;
gp->c_option = NULL;
} else if (F_ISSET(sp, SC_EX)) {
if (db_last(sp, &sp->lno))
return;
if (sp->lno == 0) {
sp->lno = 1;
sp->cno = 0;
return;
}
nb = 1;
} else {
if (F_ISSET(sp->frp, FR_CURSORSET)) {
sp->lno = sp->frp->lno;
sp->cno = sp->frp->cno;
/* If returning to a file in vi, center the line. */
F_SET(sp, SC_SCR_CENTER);
} else {
if (O_ISSET(sp, O_COMMENT))
file_comment(sp);
else
sp->lno = 1;
nb = 1;
}
if (db_get(sp, sp->lno, 0, NULL, &len)) {
sp->lno = 1;
sp->cno = 0;
return;
}
if (!nb && sp->cno > len)
nb = 1;
}
if (nb) {
sp->cno = 0;
(void)nonblank(sp, sp->lno, &sp->cno);
}
/*
* !!!
* The initial column is also the most attractive column.
*/
sp->rcm = sp->cno;
/*
* !!!
* Historically, vi initialized the absolute mark, but ex did not.
* Which meant, that if the first command in ex mode was "visual",
* or if an ex command was executed first (e.g. vi +10 file) vi was
* entered without the mark being initialized. For consistency, if
* the file isn't empty, we initialize it for everyone, believing
* that it can't hurt, and is generally useful. Not initializing it
* if the file is empty is historic practice, although it has always
* been possible to set (and use) marks in empty vi files.
*/
m.lno = sp->lno;
m.cno = sp->cno;
(void)mark_set(sp, ABSMARK1, &m, 0);
}
/*
* vi --
* Main vi command loop.
*
* PUBLIC: int vi __P((SCR **));
*/
int
vi(SCR **spp)
{
GS *gp;
MARK abs;
SCR *next, *sp;
VICMD cmd = { 0 }, *vp;
VI_PRIVATE *vip;
int comcount, mapped, rval;
/* Get the first screen. */
sp = *spp;
gp = sp->gp;
/* Point to the command structure. */
vp = &cmd;
/* Reset strange attraction. */
F_SET(vp, VM_RCM_SET);
/* Initialize the vi screen. */
if (v_init(sp))
return (1);
/* Set the focus. */
(void)sp->gp->scr_rename(sp, sp->frp->name, 1);
for (vip = VIP(sp), rval = 0;;) {
/* Resolve messages. */
if (!MAPPED_KEYS_WAITING(sp) && vs_resolve(sp, NULL, 0))
goto ret;
/*
* If not skipping a refresh, return to command mode and
* refresh the screen.
*/
if (F_ISSET(vip, VIP_S_REFRESH))
F_CLR(vip, VIP_S_REFRESH);
else {
sp->showmode = SM_COMMAND;
if (vs_refresh(sp, 0))
goto ret;
}
/* Set the new favorite position. */
if (F_ISSET(vp, VM_RCM_SET | VM_RCM_SETFNB | VM_RCM_SETNNB)) {
F_CLR(vip, VIP_RCM_LAST);
(void)vs_column(sp, &sp->rcm);
}
/*
* If not currently in a map, log the cursor position,
* and set a flag so that this command can become the
* DOT command.
*/
if (MAPPED_KEYS_WAITING(sp))
mapped = 1;
else {
if (log_cursor(sp))
goto err;
mapped = 0;
}
/*
* There may be an ex command waiting, and we returned here
* only because we exited a screen or file. In this case,
* we simply go back into the ex parser.
*/
if (EXCMD_RUNNING(gp)) {
vp->kp = &vikeys[':'];
goto ex_continue;
}
/* Refresh the command structure. */
memset(vp, 0, sizeof(VICMD));
/*
* We get a command, which may or may not have an associated
* motion. If it does, we get it too, calling its underlying
* function to get the resulting mark. We then call the
* command setting the cursor to the resulting mark.
*
* !!!
* Vi historically flushed mapped characters on error, but
* entering extra <escape> characters at the beginning of
* a map wasn't considered an error -- in fact, users would
* put leading <escape> characters in maps to clean up vi
* state before the map was interpreted. Beauty!
*/
switch (v_cmd(sp, DOT, vp, NULL, &comcount, &mapped)) {
case GC_ERR:
goto err;
case GC_ERR_NOFLUSH:
goto gc_err_noflush;
case GC_EVENT:
goto gc_event;
case GC_FATAL:
goto ret;
case GC_INTERRUPT:
goto intr;
case GC_OK:
break;
}
/* Check for security setting. */
if (F_ISSET(vp->kp, V_SECURE) && O_ISSET(sp, O_SECURE)) {
ex_emsg(sp, KEY_NAME(sp, vp->key), EXM_SECURE);
goto err;
}
/*
* Historical practice: if a dot command gets a new count,
* any motion component goes away, i.e. "d3w2." deletes a
* total of 5 words.
*/
if (F_ISSET(vp, VC_ISDOT) && comcount)
DOTMOTION->count = 1;
/* Copy the key flags into the local structure. */
F_SET(vp, vp->kp->flags);
/* Prepare to set the previous context. */
if (F_ISSET(vp, V_ABS | V_ABS_C | V_ABS_L)) {
abs.lno = sp->lno;
abs.cno = sp->cno;
}
/*
* Set the three cursor locations to the current cursor. The
* underlying routines don't bother if the cursor doesn't move.
* This also handles line commands (e.g. Y) defaulting to the
* current line.
*/
vp->m_start.lno = vp->m_stop.lno = vp->m_final.lno = sp->lno;
vp->m_start.cno = vp->m_stop.cno = vp->m_final.cno = sp->cno;
/*
* Do any required motion; v_motion sets the from MARK and the
* line mode flag, as well as the VM_RCM flags.
*/
if (F_ISSET(vp, V_MOTION) &&
v_motion(sp, DOTMOTION, vp, &mapped)) {
if (INTERRUPTED(sp))
goto intr;
goto err;
}
/*
* If a count is set and the command is line oriented, set the
* to MARK here relative to the cursor/from MARK. This is for
* commands that take both counts and motions, i.e. "4yy" and
* "y%". As there's no way the command can know which the user
* did, we have to do it here. (There are commands that are
* line oriented and that take counts ("#G", "#H"), for which
* this calculation is either completely meaningless or wrong.
* Each command must validate the value for itself.
*/
if (F_ISSET(vp, VC_C1SET) && F_ISSET(vp, VM_LMODE))
vp->m_stop.lno += vp->count - 1;
/* Increment the command count. */
++sp->ccnt;
#if defined(DEBUG) && defined(COMLOG)
v_comlog(sp, vp);
#endif
/* Call the function. */
ex_continue: if (vp->kp->func(sp, vp))
goto err;
gc_event:
#ifdef DEBUG
/* Make sure no function left the temporary space locked. */
if (F_ISSET(gp, G_TMP_INUSE)) {
F_CLR(gp, G_TMP_INUSE);
msgq(sp, M_ERR,
"232|vi: temporary buffer not released");
}
#endif
/*
* If we're exiting this screen, move to the next one, or, if
* there aren't any more, return to the main editor loop. The
* ordering is careful, don't discard the contents of sp until
* the end.
*/
if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) {
if (file_end(sp, NULL, F_ISSET(sp, SC_EXIT_FORCE)))
goto ret;
if (vs_discard(sp, &next))
goto ret;
if (next == NULL && vs_swap(sp, &next, NULL))
goto ret;
*spp = next;
if (screen_end(sp))
goto ret;
if (next == NULL)
break;
/* Switch screens, change focus. */
sp = next;
vip = VIP(sp);
(void)sp->gp->scr_rename(sp, sp->frp->name, 1);
/* Don't trust the cursor. */
F_SET(vip, VIP_CUR_INVALID);
continue;
}
/*
* Set the dot command structure.
*
* !!!
* Historically, commands which used mapped keys did not
* set the dot command, with the exception of the text
* input commands.
*/
if (F_ISSET(vp, V_DOT) && !mapped) {
*DOT = cmd;
F_SET(DOT, VC_ISDOT);
/*
* If a count was supplied for both the command and
* its motion, the count was used only for the motion.
* Turn the count back on for the dot structure.
*/
if (F_ISSET(vp, VC_C1RESET))
F_SET(DOT, VC_C1SET);
/* VM flags aren't retained. */
F_CLR(DOT, VM_COMMASK | VM_RCM_MASK);
}
/*
* Some vi row movements are "attracted" to the last position
* set, i.e. the VM_RCM commands are moths to the VM_RCM_SET
* commands' candle. If the movement is to the EOL the vi
* command handles it. If it's to the beginning, we handle it
* here.
*
* Note, some commands (e.g. _, ^) don't set the VM_RCM_SETFNB
* flag, but do the work themselves. The reason is that they
* have to modify the column in case they're being used as a
* motion component. Other similar commands (e.g. +, -) don't
* have to modify the column because they are always line mode
* operations when used as motions, so the column number isn't
* of any interest.
*
* Does this totally violate the screen and editor layering?
* You betcha. As they say, if you think you understand it,
* you don't.
*/
switch (F_ISSET(vp, VM_RCM_MASK)) {
case 0:
case VM_RCM_SET:
break;
case VM_RCM:
vp->m_final.cno = vs_rcm(sp,
vp->m_final.lno, F_ISSET(vip, VIP_RCM_LAST));
break;
case VM_RCM_SETLAST:
F_SET(vip, VIP_RCM_LAST);
break;
case VM_RCM_SETFNB:
vp->m_final.cno = 0;
/* FALLTHROUGH */
case VM_RCM_SETNNB:
if (nonblank(sp, vp->m_final.lno, &vp->m_final.cno))
goto err;
break;
default:
abort();
}
/* Update the cursor. */
sp->lno = vp->m_final.lno;
sp->cno = vp->m_final.cno;
/*
* Set the absolute mark -- set even if a tags or similar
* command, since the tag may be moving to the same file.
*/
if ((F_ISSET(vp, V_ABS) ||
(F_ISSET(vp, V_ABS_L) && sp->lno != abs.lno) ||
(F_ISSET(vp, V_ABS_C) &&
(sp->lno != abs.lno || sp->cno != abs.cno))) &&
mark_set(sp, ABSMARK1, &abs, 1))
goto err;
if (0) {
err: if (v_event_flush(sp, CH_MAPPED))
msgq(sp, M_BERR,
"110|Vi command failed: mapped keys discarded");
}
/*
* Check and clear interrupts. There's an obvious race, but
* it's not worth fixing.
*/
gc_err_noflush: if (INTERRUPTED(sp)) {
intr: CLR_INTERRUPT(sp);
if (v_event_flush(sp, CH_MAPPED))
msgq(sp, M_ERR,
"231|Interrupted: mapped keys discarded");
else
msgq(sp, M_ERR, "236|Interrupted");
}
/* If the last command switched screens, update. */
if (F_ISSET(sp, SC_SSWITCH)) {
F_CLR(sp, SC_SSWITCH);
/*
* If the current screen is still displayed, it will
* need a new status line.
*/
F_SET(sp, SC_STATUS);
/* Switch screens, change focus. */
sp = sp->nextdisp;
vip = VIP(sp);
(void)sp->gp->scr_rename(sp, sp->frp->name, 1);
/* Don't trust the cursor. */
F_SET(vip, VIP_CUR_INVALID);
/* Refresh so we can display messages. */
if (vs_refresh(sp, 1))
return (1);
}
/* If the last command switched files, change focus. */
if (F_ISSET(sp, SC_FSWITCH)) {
F_CLR(sp, SC_FSWITCH);
(void)sp->gp->scr_rename(sp, sp->frp->name, 1);
}
/* If leaving vi, return to the main editor loop. */
if (F_ISSET(gp, G_SRESTART) || F_ISSET(sp, SC_EX)) {
*spp = sp;
v_dtoh(sp);
gp->scr_discard(sp, NULL);
break;
}
}
if (0)
ret: rval = 1;
return (rval);
}
/*
* v_mark -- m[a-z]
* Set a mark.
*
* PUBLIC: int v_mark __P((SCR *, VICMD *));
*/
int
v_mark(SCR *sp, VICMD *vp)
{
return (mark_set(sp, vp->character, &vp->m_start, 1));
}
static void mark_cur(int c)
{
mark_set(c, gui_y(), gui_x());
}