TestDisplay::TestDisplay(WhichDisplay which) :
_initStr(NULL),
_lcdCfg(NULL),
_lcdBoard(P0_27, P0_28),
_touch(P0_27, P0_28, P2_25) {
switch (which) {
case TFT_5:
_lcdCfg = new LcdController::Config(LCD_CONFIGURATION_50);
_initStr = LCD_INIT_STRING_50;
break;
case TFT_4_3:
_lcdCfg = new LcdController::Config(LCD_CONFIGURATION_43);
_initStr = LCD_INIT_STRING_43;
break;
default:
mbed_die();
}
if (sdram_init() == 1) {
printf("Failed to initialize SDRAM\n");
_framebuffer = 0;
} else {
_framebuffer = (uint32_t) malloc(_lcdCfg->width * _lcdCfg->height * 2 * 3); // 2 is for 16 bit color, 3 is the number of buffers
if (_framebuffer != 0) {
memset((uint8_t*)_framebuffer, 0, _lcdCfg->width * _lcdCfg->height * 2 * 3);
}
}
}
void os_error (uint32_t err_code) {
/* This function is called when a runtime error is detected. Parameter */
/* 'err_code' holds the runtime error code (defined in RTL.H). */
mbed_die();
/* HERE: include optional code to be executed on runtime error. */
for (;;);
}
Httpd::Httpd(int i_port_number)
{
if(!NyLPC_cHttpd_initialize((NyLPC_TcHttpd_t*)(&this->_inst),(NyLPC_TUInt16)i_port_number)){
mbed_die();
}
this->_inst._parent=this;
this->_inst.super.function.onRequest=onRequestHandler;
}
UdpSocket::UdpSocket(unsigned short i_port,bool i_nobuffer)
{
if(i_nobuffer){
this->_inst=NyLPC_cNet_createUdpSocketEx(i_port,NyLPC_TSocketType_UDP_NOBUF);
}else{
this->_inst=NyLPC_cNet_createUdpSocketEx(i_port,NyLPC_TSocketType_UDP_NORMAL);
}
if(this->_inst==NULL){
mbed_die();
}
}
WEAK void mbed_die_advanced(uint32_t err_code) {
#ifndef NRF51_H
__disable_irq(); // dont allow interrupts to disturb the flash pattern
#endif
#if (DEVICE_ERROR_RED == 1)
mbed_die();
#elif (DEVICE_ERROR_PATTERN == 1)
gpio_t led_1; gpio_init_out(&led_1, LED1);
gpio_t led_2; gpio_init_out(&led_2, LED2);
gpio_t led_3; gpio_init_out(&led_3, LED3);
gpio_t led_4; gpio_init_out(&led_4, LED4);
uint32_t i = 0;
// Show this is advanced die
for(i=0 ;i<4; i++) {
gpio_write(&led_1, 1);
gpio_write(&led_2, 0);
gpio_write(&led_3, 1);
gpio_write(&led_4, 0);
wait_ms(150);
gpio_write(&led_1, 0);
gpio_write(&led_2, 1);
gpio_write(&led_3, 0);
gpio_write(&led_4, 1);
wait_ms(150);
}
i = 0;
while (1) {
gpio_write(&led_1, i&0x01);
gpio_write(&led_2, (i>>1)&0x01);
gpio_write(&led_3, (i>>2)&0x01);
gpio_write(&led_4, (i>>3)&0x01);
i++;
if(i>err_code)
i = 0;
wait_ms(150);
}
#endif
}
void sysThreadError(osStatus status) {
if (status != osOK) {
mbed_die();
}
}
void os_error (uint32_t err_code) {
/* This function is called when a runtime error is detected. Parameter */
/* 'err_code' holds the runtime error code (defined in RTX_Conf.h). */
mbed_die();
}
void exit(int status) {
TDLOG("!!! EXIT !!! status(%d)\r\n\r\n", status);
mbed_die();
while(1);
}
void sysThreadError(osStatus status) {
if (status != osOK) {
DiagPrintf("sysThreadError : 0x%x\n", status);
mbed_die();
}
}
/*---------------------------------------------------------------------------*
* Routine: sys_sem_signal
*---------------------------------------------------------------------------*
* Description:
* Signals (releases) a semaphore
* Inputs:
* sys_sem_t sem -- Semaphore to signal
*---------------------------------------------------------------------------*/
void sys_sem_signal(sys_sem_t *data) {
if (osSemaphoreRelease(data->id) != osOK)
mbed_die(); /* Can be called by ISR do not use printf */
}
