int coap_security_handler_configure_keys( coap_security_t *sec, coap_security_keys_t keys )
{
int ret = -1;
switch( sec->_conn_mode ){
case Certificate:{
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if( mbedtls_x509_crt_parse( &sec->_cacert, keys._server_cert,
keys._server_cert_len ) < 0 ){
break;
}
if( mbedtls_x509_crt_parse( &sec->_owncert, keys._pub_cert_or_identifier,
keys._pub_len ) < 0 ){
break;
}
if( mbedtls_pk_parse_key(&sec->_pkey, keys._priv, keys._priv_len, NULL, 0) < 0){
break;
}
//TODO: If needed in server mode, this won't work
if( 0 != mbedtls_ssl_conf_own_cert(&sec->_conf, &sec->_owncert, &sec->_pkey) ){
break;
}
//TODO: use MBEDTLS_SSL_VERIFY_REQUIRED instead of optional
mbedtls_ssl_conf_authmode( &sec->_conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
mbedtls_ssl_conf_ca_chain( &sec->_conf, &sec->_cacert, NULL );
ret = 0;
#endif
break;
}
case PSK: {
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
if( 0 != mbedtls_ssl_conf_psk(&sec->_conf, keys._priv, keys._priv_len, keys._pub_cert_or_identifier, keys._pub_len) ){
break;
}
mbedtls_ssl_conf_ciphersuites(&sec->_conf, PSK_SUITES);
ret = 0;
#endif
break;
}
case ECJPAKE: {
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
if( mbedtls_ssl_set_hs_ecjpake_password(&sec->_ssl, keys._priv, keys._priv_len) != 0 ){
return -1;
}
mbedtls_ssl_conf_ciphersuites(&sec->_conf, ECJPAKE_SUITES);
//NOTE: If thread starts supporting PSK in other modes, then this will be needed!
mbedtls_ssl_conf_export_keys_cb(&sec->_conf,
export_key_block,
&sec->_keyblk);
ret = 0;
#endif
break;
}
default:
break;
}
return ret;
}
static CURLcode
mbed_connect_step1(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
bool sni = TRUE; /* default is SNI enabled */
int ret = -1;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
void *old_session = NULL;
char errorbuf[128];
errorbuf[0]=0;
/* mbedTLS only supports SSLv3 and TLSv1 */
if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
failf(data, "mbedTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
sni = FALSE; /* SSLv3 has no SNI */
#ifdef THREADING_SUPPORT
entropy_init_mutex(&entropy);
mbedtls_ctr_drbg_init(&connssl->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&connssl->ctr_drbg, entropy_func_mutex,
&entropy, NULL, 0);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#else
mbedtls_entropy_init(&connssl->entropy);
mbedtls_ctr_drbg_init(&connssl->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&connssl->ctr_drbg, mbedtls_entropy_func,
&connssl->entropy, NULL, 0);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#endif /* THREADING_SUPPORT */
/* Load the trusted CA */
mbedtls_x509_crt_init(&connssl->cacert);
if(data->set.str[STRING_SSL_CAFILE]) {
ret = mbedtls_x509_crt_parse_file(&connssl->cacert,
data->set.str[STRING_SSL_CAFILE]);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert file %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_SSL_CAFILE], -ret, errorbuf);
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
if(data->set.str[STRING_SSL_CAPATH]) {
ret = mbedtls_x509_crt_parse_path(&connssl->cacert,
data->set.str[STRING_SSL_CAPATH]);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert path %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_SSL_CAPATH], -ret, errorbuf);
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
mbedtls_x509_crt_init(&connssl->clicert);
if(data->set.str[STRING_CERT]) {
ret = mbedtls_x509_crt_parse_file(&connssl->clicert,
data->set.str[STRING_CERT]);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading client cert file %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_CERT], -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
mbedtls_pk_init(&connssl->pk);
if(data->set.str[STRING_KEY]) {
ret = mbedtls_pk_parse_keyfile(&connssl->pk, data->set.str[STRING_KEY],
data->set.str[STRING_KEY_PASSWD]);
if(ret == 0 && !mbedtls_pk_can_do(&connssl->pk, MBEDTLS_PK_RSA))
ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading private key %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_KEY], -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
mbedtls_x509_crl_init(&connssl->crl);
if(data->set.str[STRING_SSL_CRLFILE]) {
ret = mbedtls_x509_crl_parse_file(&connssl->crl,
data->set.str[STRING_SSL_CRLFILE]);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading CRL file %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_SSL_CRLFILE], -ret, errorbuf);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "mbedTLS: Connecting to %s:%d\n",
conn->host.name, conn->remote_port);
mbedtls_ssl_config_init(&connssl->config);
mbedtls_ssl_init(&connssl->ssl);
if(mbedtls_ssl_setup(&connssl->ssl, &connssl->config)) {
failf(data, "mbedTLS: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
ret = mbedtls_ssl_config_defaults(&connssl->config,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if(ret) {
failf(data, "mbedTLS: ssl_config failed");
return CURLE_SSL_CONNECT_ERROR;
}
/* new profile with RSA min key len = 1024 ... */
mbedtls_ssl_conf_cert_profile(&connssl->config,
&mbedtls_x509_crt_profile_fr);
switch(data->set.ssl.version) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_1);
infof(data, "mbedTLS: Set min SSL version to TLS 1.0\n");
break;
case CURL_SSLVERSION_SSLv3:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
mbedtls_ssl_conf_max_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
infof(data, "mbedTLS: Set SSL version to SSLv3\n");
break;
case CURL_SSLVERSION_TLSv1_0:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_1);
mbedtls_ssl_conf_max_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_1);
infof(data, "mbedTLS: Set SSL version to TLS 1.0\n");
break;
case CURL_SSLVERSION_TLSv1_1:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_2);
mbedtls_ssl_conf_max_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_2);
infof(data, "mbedTLS: Set SSL version to TLS 1.1\n");
break;
case CURL_SSLVERSION_TLSv1_2:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_3);
mbedtls_ssl_conf_max_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_3);
infof(data, "mbedTLS: Set SSL version to TLS 1.2\n");
break;
default:
failf(data, "mbedTLS: Unsupported SSL protocol version");
return CURLE_SSL_CONNECT_ERROR;
}
mbedtls_ssl_conf_authmode(&connssl->config, MBEDTLS_SSL_VERIFY_OPTIONAL);
mbedtls_ssl_conf_rng(&connssl->config, mbedtls_ctr_drbg_random,
&connssl->ctr_drbg);
mbedtls_ssl_set_bio(&connssl->ssl, &conn->sock[sockindex],
mbedtls_net_send,
mbedtls_net_recv,
NULL /* rev_timeout() */);
mbedtls_ssl_conf_ciphersuites(&connssl->config,
mbedtls_ssl_list_ciphersuites());
if(!Curl_ssl_getsessionid(conn, &old_session, NULL)) {
ret = mbedtls_ssl_set_session(&connssl->ssl, old_session);
if(ret) {
failf(data, "mbedtls_ssl_set_session returned -0x%x", -ret);
return CURLE_SSL_CONNECT_ERROR;
}
infof(data, "mbedTLS re-using session\n");
}
mbedtls_ssl_conf_ca_chain(&connssl->config,
&connssl->cacert,
&connssl->crl);
if(data->set.str[STRING_KEY]) {
mbedtls_ssl_conf_own_cert(&connssl->config,
&connssl->clicert, &connssl->pk);
}
if(mbedtls_ssl_set_hostname(&connssl->ssl, conn->host.name)) {
/* mbedtls_ssl_set_hostname() sets the name to use in CN/SAN checks *and*
the name to set in the SNI extension. So even if curl connects to a
host specified as an IP address, this function must be used. */
failf(data, "couldn't set hostname in mbedTLS");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
const char **p = &connssl->protocols[0];
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2)
*p++ = NGHTTP2_PROTO_VERSION_ID;
#endif
*p++ = ALPN_HTTP_1_1;
*p = NULL;
/* this function doesn't clone the protocols array, which is why we need
to keep it around */
if(mbedtls_ssl_conf_alpn_protocols(&connssl->config,
&connssl->protocols[0])) {
failf(data, "Failed setting ALPN protocols");
return CURLE_SSL_CONNECT_ERROR;
}
for(p = &connssl->protocols[0]; *p; ++p)
infof(data, "ALPN, offering %s\n", *p);
}
#endif
#ifdef MBEDTLS_DEBUG
mbedtls_ssl_conf_dbg(&connssl->config, mbedtls_debug, data);
#endif
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
int main( int argc, char *argv[] )
{
int ret = 0, len;
mbedtls_net_context server_fd;
unsigned char buf[1024];
#if defined(MBEDTLS_BASE64_C)
unsigned char base[1024];
#endif
char hostname[32];
const char *pers = "ssl_mail_client";
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt cacert;
mbedtls_x509_crt clicert;
mbedtls_pk_context pkey;
int i;
size_t n;
char *p, *q;
const int *list;
/*
* Make sure memory references are valid in case we exit early.
*/
mbedtls_net_init( &server_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
memset( &buf, 0, sizeof( buf ) );
mbedtls_x509_crt_init( &cacert );
mbedtls_x509_crt_init( &clicert );
mbedtls_pk_init( &pkey );
mbedtls_ctr_drbg_init( &ctr_drbg );
if( argc == 0 )
{
usage:
mbedtls_printf( USAGE );
list = mbedtls_ssl_list_ciphersuites();
while( *list )
{
mbedtls_printf(" %s\n", mbedtls_ssl_get_ciphersuite_name( *list ) );
list++;
}
mbedtls_printf("\n");
goto exit;
}
opt.server_name = DFL_SERVER_NAME;
opt.server_port = DFL_SERVER_PORT;
opt.debug_level = DFL_DEBUG_LEVEL;
opt.authentication = DFL_AUTHENTICATION;
opt.mode = DFL_MODE;
opt.user_name = DFL_USER_NAME;
opt.user_pwd = DFL_USER_PWD;
opt.mail_from = DFL_MAIL_FROM;
opt.mail_to = DFL_MAIL_TO;
opt.ca_file = DFL_CA_FILE;
opt.crt_file = DFL_CRT_FILE;
opt.key_file = DFL_KEY_FILE;
opt.force_ciphersuite[0]= DFL_FORCE_CIPHER;
for( i = 1; i < argc; i++ )
{
p = argv[i];
if( ( q = strchr( p, '=' ) ) == NULL )
goto usage;
*q++ = '\0';
if( strcmp( p, "server_name" ) == 0 )
opt.server_name = q;
else if( strcmp( p, "server_port" ) == 0 )
opt.server_port = q;
else if( strcmp( p, "debug_level" ) == 0 )
{
opt.debug_level = atoi( q );
if( opt.debug_level < 0 || opt.debug_level > 65535 )
goto usage;
}
else if( strcmp( p, "authentication" ) == 0 )
{
opt.authentication = atoi( q );
if( opt.authentication < 0 || opt.authentication > 1 )
goto usage;
}
else if( strcmp( p, "mode" ) == 0 )
{
opt.mode = atoi( q );
if( opt.mode < 0 || opt.mode > 1 )
goto usage;
}
else if( strcmp( p, "user_name" ) == 0 )
opt.user_name = q;
else if( strcmp( p, "user_pwd" ) == 0 )
opt.user_pwd = q;
else if( strcmp( p, "mail_from" ) == 0 )
opt.mail_from = q;
else if( strcmp( p, "mail_to" ) == 0 )
opt.mail_to = q;
else if( strcmp( p, "ca_file" ) == 0 )
opt.ca_file = q;
else if( strcmp( p, "crt_file" ) == 0 )
opt.crt_file = q;
else if( strcmp( p, "key_file" ) == 0 )
opt.key_file = q;
else if( strcmp( p, "force_ciphersuite" ) == 0 )
{
opt.force_ciphersuite[0] = -1;
opt.force_ciphersuite[0] = mbedtls_ssl_get_ciphersuite_id( q );
if( opt.force_ciphersuite[0] <= 0 )
goto usage;
opt.force_ciphersuite[1] = 0;
}
else
goto usage;
}
/*
* 0. Initialize the RNG and the session data
*/
mbedtls_printf( "\n . Seeding the random number generator..." );
fflush( stdout );
mbedtls_entropy_init( &entropy );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 1.1. Load the trusted CA
*/
mbedtls_printf( " . Loading the CA root certificate ..." );
fflush( stdout );
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.ca_file ) )
ret = mbedtls_x509_crt_parse_file( &cacert, opt.ca_file );
else
#endif
#if defined(MBEDTLS_CERTS_C)
ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem,
mbedtls_test_cas_pem_len );
#else
{
ret = 1;
mbedtls_printf("MBEDTLS_CERTS_C not defined.");
}
#endif
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok (%d skipped)\n", ret );
/*
* 1.2. Load own certificate and private key
*
* (can be skipped if client authentication is not required)
*/
mbedtls_printf( " . Loading the client cert. and key..." );
fflush( stdout );
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.crt_file ) )
ret = mbedtls_x509_crt_parse_file( &clicert, opt.crt_file );
else
#endif
#if defined(MBEDTLS_CERTS_C)
ret = mbedtls_x509_crt_parse( &clicert, (const unsigned char *) mbedtls_test_cli_crt,
mbedtls_test_cli_crt_len );
#else
{
ret = -1;
mbedtls_printf("MBEDTLS_CERTS_C not defined.");
}
#endif
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret );
goto exit;
}
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.key_file ) )
ret = mbedtls_pk_parse_keyfile( &pkey, opt.key_file, "" );
else
#endif
#if defined(MBEDTLS_CERTS_C) && defined(MBEDTLS_PEM_PARSE_C)
ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_cli_key,
mbedtls_test_cli_key_len, NULL, 0 );
#else
{
ret = -1;
mbedtls_printf("MBEDTLS_CERTS_C or MBEDTLS_PEM_PARSE_C not defined.");
}
#endif
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 2. Start the connection
*/
mbedtls_printf( " . Connecting to tcp/%s/%s...", opt.server_name,
opt.server_port );
fflush( stdout );
if( ( ret = mbedtls_net_connect( &server_fd, opt.server_name,
opt.server_port, MBEDTLS_NET_PROTO_TCP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned %d\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 3. Setup stuff
*/
mbedtls_printf( " . Setting up the SSL/TLS structure..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
goto exit;
}
/* OPTIONAL is not optimal for security,
* but makes interop easier in this simplified example */
mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
if( opt.force_ciphersuite[0] != DFL_FORCE_CIPHER )
mbedtls_ssl_conf_ciphersuites( &conf, opt.force_ciphersuite );
mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &clicert, &pkey ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_set_hostname( &ssl, opt.server_name ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &server_fd, mbedtls_net_send, mbedtls_net_recv, NULL );
mbedtls_printf( " ok\n" );
if( opt.mode == MODE_SSL_TLS )
{
if( do_handshake( &ssl ) != 0 )
goto exit;
mbedtls_printf( " > Get header from server:" );
fflush( stdout );
ret = write_ssl_and_get_response( &ssl, buf, 0 );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write EHLO to server:" );
fflush( stdout );
gethostname( hostname, 32 );
len = sprintf( (char *) buf, "EHLO %s\r\n", hostname );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
}
else
{
mbedtls_printf( " > Get header from server:" );
fflush( stdout );
ret = write_and_get_response( &server_fd, buf, 0 );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write EHLO to server:" );
fflush( stdout );
gethostname( hostname, 32 );
len = sprintf( (char *) buf, "EHLO %s\r\n", hostname );
ret = write_and_get_response( &server_fd, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write STARTTLS to server:" );
fflush( stdout );
gethostname( hostname, 32 );
len = sprintf( (char *) buf, "STARTTLS\r\n" );
ret = write_and_get_response( &server_fd, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
if( do_handshake( &ssl ) != 0 )
goto exit;
}
#if defined(MBEDTLS_BASE64_C)
if( opt.authentication )
{
mbedtls_printf( " > Write AUTH LOGIN to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "AUTH LOGIN\r\n" );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write username to server: %s", opt.user_name );
fflush( stdout );
ret = mbedtls_base64_encode( base, sizeof( base ), &n, (const unsigned char *) opt.user_name,
strlen( opt.user_name ) );
if( ret != 0 ) {
mbedtls_printf( " failed\n ! mbedtls_base64_encode returned %d\n\n", ret );
goto exit;
}
len = sprintf( (char *) buf, "%s\r\n", base );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 300 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write password to server: %s", opt.user_pwd );
fflush( stdout );
ret = mbedtls_base64_encode( base, sizeof( base ), &n, (const unsigned char *) opt.user_pwd,
strlen( opt.user_pwd ) );
if( ret != 0 ) {
mbedtls_printf( " failed\n ! mbedtls_base64_encode returned %d\n\n", ret );
goto exit;
}
len = sprintf( (char *) buf, "%s\r\n", base );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
}
#endif
mbedtls_printf( " > Write MAIL FROM to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "MAIL FROM:<%s>\r\n", opt.mail_from );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write RCPT TO to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "RCPT TO:<%s>\r\n", opt.mail_to );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write DATA to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "DATA\r\n" );
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 300 || ret > 399 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_printf( " > Write content to server:" );
fflush( stdout );
len = sprintf( (char *) buf, "From: %s\r\nSubject: mbed TLS Test mail\r\n\r\n"
"This is a simple test mail from the "
"mbed TLS mail client example.\r\n"
"\r\n"
"Enjoy!", opt.mail_from );
ret = write_ssl_data( &ssl, buf, len );
len = sprintf( (char *) buf, "\r\n.\r\n");
ret = write_ssl_and_get_response( &ssl, buf, len );
if( ret < 200 || ret > 299 )
{
mbedtls_printf( " failed\n ! server responded with %d\n\n", ret );
goto exit;
}
mbedtls_printf(" ok\n" );
mbedtls_ssl_close_notify( &ssl );
exit:
mbedtls_net_free( &server_fd );
mbedtls_x509_crt_free( &clicert );
mbedtls_x509_crt_free( &cacert );
mbedtls_pk_free( &pkey );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
mbedtls_printf( " + Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
return( ret );
}
/**
* Constructor.
*/
ManuvrTLSClient::ManuvrTLSClient(BufferPipe* _n) : ManuvrTLS(_n, MBEDTLS_DEBUG_LEVEL) {
_tls_pipe_name = "TLSClient";
mbedtls_ssl_init(&_ssl);
if (nullptr != _n) {
// This is the point at which we detect if our underlying transport
// is a stream or datagram. This will impact our choices later on.
int ret = mbedtls_ssl_config_defaults(&_conf,
MBEDTLS_SSL_IS_CLIENT,
_n->_bp_flag(BPIPE_FLAG_PIPE_PACKETIZED) ?
MBEDTLS_SSL_TRANSPORT_DATAGRAM : MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT
);
if (0 == ret) {
mbedtls_ssl_conf_ciphersuites(&_conf, ManuvrTLS::allowed_ciphersuites);
// TODO: Sec-fail. YOU FAIL! Remove once inter-op is demonstrated.
mbedtls_ssl_conf_authmode(&_conf, MBEDTLS_SSL_VERIFY_OPTIONAL);
// TODO: Need to be able to load a CA cert. If we also have
// runtime-writable storage, we could do cert-pinning at this point.
//mbedtls_ssl_conf_ca_chain( &_conf, &cacert, nullptr);
mbedtls_ssl_conf_rng(&_conf, mbedtls_ctr_drbg_random, &_ctr_drbg);
mbedtls_ssl_conf_dbg(&_conf, tls_log_shunt, stdout); // TODO: Suspect...
// TODO: If appropriate, we load a certificate.
//ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *)
if (0 == ret) {
// TODO: This should be loaded from secure storage.
// TODO: This is a choice independent from the cert.
// TODO: We hardcode the same IoTivity default creds used elsewhere.
ret = mbedtls_ssl_conf_psk(&_conf, (const unsigned char*)"AAAAAAAAAAAAAAAA", 16, (const unsigned char*)"32323232-3232-3232-3232-323232323232", 36);
if (0 == ret) {
ret = mbedtls_ssl_setup(&_ssl, &_conf);
if (0 == ret) {
// TODO: This might be the lookup name if we had DNS.
//ret = mbedtls_ssl_set_hostname(&_ssl, SERVER_NAME);
if (0 == ret) {
_log.concatf("ManuvrTLSClient(): Construction completed.\n");
}
else {
_log.concatf("ManuvrTLSClient() failed: mbedtls_ssl_set_hostname returned 0x%04x\n", ret);
}
}
else {
_log.concatf("ManuvrTLSClient() failed: mbedtls_ssl_setup returned 0x%04x\n", ret);
}
}
else {
_log.concatf("ManuvrTLSClient() failed: mbedtls_ssl_conf_psk returned 0x%04x\n", ret);
}
}
else {
_log.concatf("ManuvrTLSClient() failed: mbedtls_x509_crt_parse returned 0x%04x\n", ret);
}
}
else {
_log.concatf("ManuvrTLSClient() failed: mbedtls_ssl_config_defaults returned 0x%04x\n", ret);
}
}
Kernel::log(&_log);
}
static CURLcode
mbed_connect_step1(struct connectdata *conn,
int sockindex)
{
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
const char * const ssl_cafile = SSL_CONN_CONFIG(CAfile);
const bool verifypeer = SSL_CONN_CONFIG(verifypeer);
const char * const ssl_capath = SSL_CONN_CONFIG(CApath);
char * const ssl_cert = SSL_SET_OPTION(cert);
const char * const ssl_crlfile = SSL_SET_OPTION(CRLfile);
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
const long int port = SSL_IS_PROXY() ? conn->port : conn->remote_port;
int ret = -1;
char errorbuf[128];
errorbuf[0]=0;
/* mbedTLS only supports SSLv3 and TLSv1 */
if(SSL_CONN_CONFIG(version) == CURL_SSLVERSION_SSLv2) {
failf(data, "mbedTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef THREADING_SUPPORT
entropy_init_mutex(&ts_entropy);
mbedtls_ctr_drbg_init(&BACKEND->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&BACKEND->ctr_drbg, entropy_func_mutex,
&ts_entropy, NULL, 0);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#else
mbedtls_entropy_init(&BACKEND->entropy);
mbedtls_ctr_drbg_init(&BACKEND->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&BACKEND->ctr_drbg, mbedtls_entropy_func,
&BACKEND->entropy, NULL, 0);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#endif /* THREADING_SUPPORT */
/* Load the trusted CA */
mbedtls_x509_crt_init(&BACKEND->cacert);
if(ssl_cafile) {
ret = mbedtls_x509_crt_parse_file(&BACKEND->cacert, ssl_cafile);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert file %s - mbedTLS: (-0x%04X) %s",
ssl_cafile, -ret, errorbuf);
if(verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
if(ssl_capath) {
ret = mbedtls_x509_crt_parse_path(&BACKEND->cacert, ssl_capath);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert path %s - mbedTLS: (-0x%04X) %s",
ssl_capath, -ret, errorbuf);
if(verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
mbedtls_x509_crt_init(&BACKEND->clicert);
if(ssl_cert) {
ret = mbedtls_x509_crt_parse_file(&BACKEND->clicert, ssl_cert);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading client cert file %s - mbedTLS: (-0x%04X) %s",
ssl_cert, -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
mbedtls_pk_init(&BACKEND->pk);
if(SSL_SET_OPTION(key)) {
ret = mbedtls_pk_parse_keyfile(&BACKEND->pk, SSL_SET_OPTION(key),
SSL_SET_OPTION(key_passwd));
if(ret == 0 && !mbedtls_pk_can_do(&BACKEND->pk, MBEDTLS_PK_RSA))
ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading private key %s - mbedTLS: (-0x%04X) %s",
SSL_SET_OPTION(key), -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
mbedtls_x509_crl_init(&BACKEND->crl);
if(ssl_crlfile) {
ret = mbedtls_x509_crl_parse_file(&BACKEND->crl, ssl_crlfile);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading CRL file %s - mbedTLS: (-0x%04X) %s",
ssl_crlfile, -ret, errorbuf);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "mbedTLS: Connecting to %s:%d\n", hostname, port);
mbedtls_ssl_config_init(&BACKEND->config);
mbedtls_ssl_init(&BACKEND->ssl);
if(mbedtls_ssl_setup(&BACKEND->ssl, &BACKEND->config)) {
failf(data, "mbedTLS: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
ret = mbedtls_ssl_config_defaults(&BACKEND->config,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if(ret) {
failf(data, "mbedTLS: ssl_config failed");
return CURLE_SSL_CONNECT_ERROR;
}
/* new profile with RSA min key len = 1024 ... */
mbedtls_ssl_conf_cert_profile(&BACKEND->config,
&mbedtls_x509_crt_profile_fr);
switch(SSL_CONN_CONFIG(version)) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
mbedtls_ssl_conf_min_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_1);
infof(data, "mbedTLS: Set min SSL version to TLS 1.0\n");
break;
case CURL_SSLVERSION_SSLv3:
mbedtls_ssl_conf_min_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
mbedtls_ssl_conf_max_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
infof(data, "mbedTLS: Set SSL version to SSLv3\n");
break;
case CURL_SSLVERSION_TLSv1_0:
case CURL_SSLVERSION_TLSv1_1:
case CURL_SSLVERSION_TLSv1_2:
case CURL_SSLVERSION_TLSv1_3:
{
CURLcode result = set_ssl_version_min_max(conn, sockindex);
if(result != CURLE_OK)
return result;
break;
}
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
mbedtls_ssl_conf_authmode(&BACKEND->config, MBEDTLS_SSL_VERIFY_OPTIONAL);
mbedtls_ssl_conf_rng(&BACKEND->config, mbedtls_ctr_drbg_random,
&BACKEND->ctr_drbg);
mbedtls_ssl_set_bio(&BACKEND->ssl, &conn->sock[sockindex],
mbedtls_net_send,
mbedtls_net_recv,
NULL /* rev_timeout() */);
mbedtls_ssl_conf_ciphersuites(&BACKEND->config,
mbedtls_ssl_list_ciphersuites());
#if defined(MBEDTLS_SSL_RENEGOTIATION)
mbedtls_ssl_conf_renegotiation(&BACKEND->config,
MBEDTLS_SSL_RENEGOTIATION_ENABLED);
#endif
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
mbedtls_ssl_conf_session_tickets(&BACKEND->config,
MBEDTLS_SSL_SESSION_TICKETS_DISABLED);
#endif
/* Check if there's a cached ID we can/should use here! */
if(SSL_SET_OPTION(primary.sessionid)) {
void *old_session = NULL;
Curl_ssl_sessionid_lock(conn);
if(!Curl_ssl_getsessionid(conn, &old_session, NULL, sockindex)) {
ret = mbedtls_ssl_set_session(&BACKEND->ssl, old_session);
if(ret) {
Curl_ssl_sessionid_unlock(conn);
failf(data, "mbedtls_ssl_set_session returned -0x%x", -ret);
return CURLE_SSL_CONNECT_ERROR;
}
infof(data, "mbedTLS re-using session\n");
}
Curl_ssl_sessionid_unlock(conn);
}
mbedtls_ssl_conf_ca_chain(&BACKEND->config,
&BACKEND->cacert,
&BACKEND->crl);
if(SSL_SET_OPTION(key)) {
mbedtls_ssl_conf_own_cert(&BACKEND->config,
&BACKEND->clicert, &BACKEND->pk);
}
if(mbedtls_ssl_set_hostname(&BACKEND->ssl, hostname)) {
/* mbedtls_ssl_set_hostname() sets the name to use in CN/SAN checks *and*
the name to set in the SNI extension. So even if curl connects to a
host specified as an IP address, this function must be used. */
failf(data, "couldn't set hostname in mbedTLS");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
const char **p = &BACKEND->protocols[0];
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2)
*p++ = NGHTTP2_PROTO_VERSION_ID;
#endif
*p++ = ALPN_HTTP_1_1;
*p = NULL;
/* this function doesn't clone the protocols array, which is why we need
to keep it around */
if(mbedtls_ssl_conf_alpn_protocols(&BACKEND->config,
&BACKEND->protocols[0])) {
failf(data, "Failed setting ALPN protocols");
return CURLE_SSL_CONNECT_ERROR;
}
for(p = &BACKEND->protocols[0]; *p; ++p)
infof(data, "ALPN, offering %s\n", *p);
}
#endif
#ifdef MBEDTLS_DEBUG
/* In order to make that work in mbedtls MBEDTLS_DEBUG_C must be defined. */
mbedtls_ssl_conf_dbg(&BACKEND->config, mbed_debug, data);
/* - 0 No debug
* - 1 Error
* - 2 State change
* - 3 Informational
* - 4 Verbose
*/
mbedtls_debug_set_threshold(4);
#endif
/* give application a chance to interfere with mbedTLS set up. */
if(data->set.ssl.fsslctx) {
ret = (*data->set.ssl.fsslctx)(data, &BACKEND->config,
data->set.ssl.fsslctxp);
if(ret) {
failf(data, "error signaled by ssl ctx callback");
return ret;
}
}
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
void SetCiphersuites(const Ciphersuites& ciphersuites)
{
mbedtls_ssl_conf_ciphersuites(&conf, ciphersuites.get());
}
static CURLcode
mbedtls_connect_step1(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
bool sni = TRUE; /* default is SNI enabled */
int ret = -1;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
void *old_session = NULL;
size_t old_session_size = 0;
char errorbuf[128];
errorbuf[0]=0;
/* mbedTLS only supports SSLv3 and TLSv1 */
if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
failf(data, "mbedTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
sni = FALSE; /* SSLv3 has no SNI */
#ifdef THREADING_SUPPORT
entropy_init_mutex(&entropy);
mbedtls_ctr_drbg_init(&connssl->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&connssl->ctr_drbg, entropy_func_mutex,
&entropy, connssl->ssn.id,
connssl->ssn.id_len);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#else
mbedtls_entropy_init(&connssl->entropy);
mbedtls_ctr_drbg_init(&connssl->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&connssl->ctr_drbg, mbedtls_entropy_func,
&connssl->entropy, connssl->ssn.id,
connssl->ssn.id_len);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#endif /* THREADING_SUPPORT */
/* Load the trusted CA */
memset(&connssl->cacert, 0, sizeof(mbedtls_x509_crt));
if(data->set.str[STRING_SSL_CAFILE]) {
ret = mbedtls_x509_crt_parse_file(&connssl->cacert,
data->set.str[STRING_SSL_CAFILE]);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert file %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_SSL_CAFILE], -ret, errorbuf);
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
if(data->set.str[STRING_SSL_CAPATH]) {
ret = mbedtls_x509_crt_parse_path(&connssl->cacert,
data->set.str[STRING_SSL_CAPATH]);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert path %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_SSL_CAPATH], -ret, errorbuf);
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
memset(&connssl->clicert, 0, sizeof(mbedtls_x509_crt));
if(data->set.str[STRING_CERT]) {
ret = mbedtls_x509_crt_parse_file(&connssl->clicert,
data->set.str[STRING_CERT]);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading client cert file %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_CERT], -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
if(data->set.str[STRING_KEY]) {
mbedtls_pk_init(&connssl->pk);
ret = mbedtls_pk_parse_keyfile(&connssl->pk, data->set.str[STRING_KEY],
data->set.str[STRING_KEY_PASSWD]);
if(ret == 0 && !mbedtls_pk_can_do(&connssl->pk, MBEDTLS_PK_RSA))
ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading private key %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_KEY], -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
memset(&connssl->crl, 0, sizeof(mbedtls_x509_crl));
if(data->set.str[STRING_SSL_CRLFILE]) {
ret = mbedtls_x509_crl_parse_file(&connssl->crl,
data->set.str[STRING_SSL_CRLFILE]);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading CRL file %s - mbedTLS: (-0x%04X) %s",
data->set.str[STRING_SSL_CRLFILE], -ret, errorbuf);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "mbedTLS: Connecting to %s:%d\n",
conn->host.name, conn->remote_port);
mbedtls_ssl_config_init(&connssl->config);
mbedtls_ssl_init(&connssl->ssl);
if(mbedtls_ssl_setup(&connssl->ssl, &connssl->config)) {
failf(data, "mbedTLS: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
ret = mbedtls_ssl_config_defaults(&connssl->config,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if(ret) {
failf(data, "mbedTLS: ssl_config failed");
return CURLE_SSL_CONNECT_ERROR;
}
/* new profile with RSA min key len = 1024 ... */
mbedtls_ssl_conf_cert_profile( &connssl->config,
&mbedtls_x509_crt_profile_fr);
switch(data->set.ssl.version) {
case CURL_SSLVERSION_SSLv3:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
infof(data, "mbedTLS: Forced min. SSL Version to be SSLv3\n");
break;
case CURL_SSLVERSION_TLSv1_0:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_1);
infof(data, "mbedTLS: Forced min. SSL Version to be TLS 1.0\n");
break;
case CURL_SSLVERSION_TLSv1_1:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_2);
infof(data, "mbedTLS: Forced min. SSL Version to be TLS 1.1\n");
break;
case CURL_SSLVERSION_TLSv1_2:
mbedtls_ssl_conf_min_version(&connssl->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_3);
infof(data, "mbedTLS: Forced min. SSL Version to be TLS 1.2\n");
break;
}
mbedtls_ssl_conf_authmode(&connssl->config, MBEDTLS_SSL_VERIFY_OPTIONAL);
mbedtls_ssl_conf_rng(&connssl->config, mbedtls_ctr_drbg_random,
&connssl->ctr_drbg);
mbedtls_ssl_set_bio(&connssl->ssl, &conn->sock[sockindex],
mbedtls_net_send,
mbedtls_net_recv,
NULL /* rev_timeout() */);
mbedtls_ssl_conf_ciphersuites(&connssl->config,
mbedtls_ssl_list_ciphersuites());
if(!Curl_ssl_getsessionid(conn, &old_session, &old_session_size)) {
memcpy(&connssl->ssn, old_session, old_session_size);
infof(data, "mbedTLS re-using session\n");
}
mbedtls_ssl_set_session(&connssl->ssl,
&connssl->ssn);
mbedtls_ssl_conf_ca_chain(&connssl->config,
&connssl->cacert,
&connssl->crl);
if(data->set.str[STRING_KEY]) {
mbedtls_ssl_conf_own_cert(&connssl->config,
&connssl->clicert, &connssl->pk);
}
if(!Curl_inet_pton(AF_INET, conn->host.name, &addr) &&
#ifdef ENABLE_IPV6
!Curl_inet_pton(AF_INET6, conn->host.name, &addr) &&
#endif
sni && mbedtls_ssl_set_hostname(&connssl->ssl, conn->host.name)) {
infof(data, "WARNING: failed to configure "
"server name indication (SNI) TLS extension\n");
}
#ifdef HAS_ALPN
if(data->set.ssl_enable_alpn) {
const char *protocols[3];
const char **p = protocols;
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2)
*p++ = NGHTTP2_PROTO_VERSION_ID;
#endif
*p++ = ALPN_HTTP_1_1;
*p = NULL;
if(mbedtls_ssl_conf_alpn_protocols(&connssl->config, protocols)) {
failf(data, "Failed setting ALPN protocols");
return CURLE_SSL_CONNECT_ERROR;
}
for(p = protocols; *p; ++p)
infof(data, "ALPN, offering %s\n", *p);
}
#endif
#ifdef MBEDTLS_DEBUG
mbedtls_ssl_conf_dbg(&connssl->ssl, mbedtls_debug, data);
#endif
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
void cSslConfig::SetCipherSuites(std::vector<int> a_CipherSuites)
{
m_CipherSuites = std::move(a_CipherSuites);
m_CipherSuites.push_back(0); // Must be null terminated
mbedtls_ssl_conf_ciphersuites(&m_Config, m_CipherSuites.data());
}
otError Dtls::Setup(bool aClient)
{
int rval;
// do not handle new connection before guard time expired
VerifyOrExit(mState == kStateOpen, rval = MBEDTLS_ERR_SSL_TIMEOUT);
mState = kStateInitializing;
mbedtls_ssl_init(&mSsl);
mbedtls_ssl_config_init(&mConf);
mbedtls_ctr_drbg_init(&mCtrDrbg);
mbedtls_entropy_init(&mEntropy);
#if OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
#ifdef MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
mbedtls_x509_crt_init(&mCaChain);
mbedtls_x509_crt_init(&mOwnCert);
mbedtls_pk_init(&mPrivateKey);
#endif // MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
#endif // OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
rval = mbedtls_entropy_add_source(&mEntropy, &Dtls::HandleMbedtlsEntropyPoll, NULL, MBEDTLS_ENTROPY_MIN_PLATFORM,
MBEDTLS_ENTROPY_SOURCE_STRONG);
VerifyOrExit(rval == 0);
{
otExtAddress eui64;
otPlatRadioGetIeeeEui64(&GetInstance(), eui64.m8);
rval = mbedtls_ctr_drbg_seed(&mCtrDrbg, mbedtls_entropy_func, &mEntropy, eui64.m8, sizeof(eui64));
VerifyOrExit(rval == 0);
}
rval = mbedtls_ssl_config_defaults(&mConf, aClient ? MBEDTLS_SSL_IS_CLIENT : MBEDTLS_SSL_IS_SERVER,
MBEDTLS_SSL_TRANSPORT_DATAGRAM, MBEDTLS_SSL_PRESET_DEFAULT);
VerifyOrExit(rval == 0);
#if OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
if (mVerifyPeerCertificate && mCipherSuites[0] == MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8)
{
mbedtls_ssl_conf_authmode(&mConf, MBEDTLS_SSL_VERIFY_REQUIRED);
}
else
{
mbedtls_ssl_conf_authmode(&mConf, MBEDTLS_SSL_VERIFY_NONE);
}
#else
OT_UNUSED_VARIABLE(mVerifyPeerCertificate);
#endif // OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
mbedtls_ssl_conf_rng(&mConf, mbedtls_ctr_drbg_random, &mCtrDrbg);
mbedtls_ssl_conf_min_version(&mConf, MBEDTLS_SSL_MAJOR_VERSION_3, MBEDTLS_SSL_MINOR_VERSION_3);
mbedtls_ssl_conf_max_version(&mConf, MBEDTLS_SSL_MAJOR_VERSION_3, MBEDTLS_SSL_MINOR_VERSION_3);
mbedtls_ssl_conf_ciphersuites(&mConf, mCipherSuites);
mbedtls_ssl_conf_export_keys_cb(&mConf, HandleMbedtlsExportKeys, this);
mbedtls_ssl_conf_handshake_timeout(&mConf, 8000, 60000);
mbedtls_ssl_conf_dbg(&mConf, HandleMbedtlsDebug, this);
#if OPENTHREAD_ENABLE_BORDER_AGENT || OPENTHREAD_ENABLE_COMMISSIONER || OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
if (!aClient)
{
mbedtls_ssl_cookie_init(&mCookieCtx);
rval = mbedtls_ssl_cookie_setup(&mCookieCtx, mbedtls_ctr_drbg_random, &mCtrDrbg);
VerifyOrExit(rval == 0);
mbedtls_ssl_conf_dtls_cookies(&mConf, mbedtls_ssl_cookie_write, mbedtls_ssl_cookie_check, &mCookieCtx);
}
#endif // OPENTHREAD_ENABLE_BORDER_AGENT || OPENTHREAD_ENABLE_COMMISSIONER || OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
rval = mbedtls_ssl_setup(&mSsl, &mConf);
VerifyOrExit(rval == 0);
mbedtls_ssl_set_bio(&mSsl, this, &Dtls::HandleMbedtlsTransmit, HandleMbedtlsReceive, NULL);
mbedtls_ssl_set_timer_cb(&mSsl, this, &Dtls::HandleMbedtlsSetTimer, HandleMbedtlsGetTimer);
if (mCipherSuites[0] == MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8)
{
rval = mbedtls_ssl_set_hs_ecjpake_password(&mSsl, mPsk, mPskLength);
}
#if OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
else
{
rval = SetApplicationCoapSecureKeys();
}
#endif // OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
VerifyOrExit(rval == 0);
mReceiveMessage = NULL;
mMessageSubType = Message::kSubTypeNone;
mState = kStateConnecting;
if (mCipherSuites[0] == MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8)
{
otLogInfoMeshCoP("DTLS started");
}
#if OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
else
{
otLogInfoCoap("Application Coap Secure DTLS started");
}
#endif // OPENTHREAD_ENABLE_APPLICATION_COAP_SECURE
mState = kStateConnecting;
Process();
exit:
if ((mState == kStateInitializing) && (rval != 0))
{
mState = kStateOpen;
FreeMbedtls();
}
return MapError(rval);
}
// 接続に使用する ciphersuites を RSA_WITH_AES_128_CBC_SHA に限定します。
// mtls_connect() より先に設定しておく必要があります。
// XXX どういう API にすべか
void
mtls_usersa(mtlsctx_t* ctx)
{
mbedtls_ssl_conf_ciphersuites(&ctx->conf, ciphersuites_RSA);
}
/**
* @brief Start the SSL client.
* @param[in] pssl: mbedtls ssl struct.
* @param[in] psocket. The underlying file descriptor.
* @param[in] server_addr. server address.
* @param[in] custom_config: custome config.
* @return The result. 0 is ok.
*/
static int nghttp2_ssl_start(mbedtls_ssl_context *pssl,
mbedtls_net_context *psocket,
http2_server_addr_t *server_addr,
http2_ssl_custom_conf_t *custom_config)
{
/*
* 0. Init
*/
int ret = -1;
/* alpn */
const char *alpn_list[5];
char a[] = "http/1.1";
char b[] = "h2";
char c[] = "h2-14";
char d[] = "h2-16";
alpn_list[0] = b;
alpn_list[1] = c;
alpn_list[2] = d;
alpn_list[3] = a;
alpn_list[4] = NULL;
if (0 != (ret = nghttp2_ssl_client_init(pssl, psocket, custom_config))) {
NGHTTP2_DBG( " failed ! nghttp2_ssl_client_init returned -0x%04x", -ret );
return ret;
}
NGHTTP2_DBG(" . Connecting to tcp/%s/%4d...", server_addr->host, server_addr->port);
/*
* 1. Start the connection
*/
if (0 != (ret = mbedtls_net_connect(psocket, server_addr->host, "443", MBEDTLS_NET_PROTO_TCP))) {
NGHTTP2_DBG(" failed ! net_connect returned -0x%04x", -ret);
return ret;
}
NGHTTP2_DBG( " ok" );
/*
* 2. Setup stuff
*/
NGHTTP2_DBG( " . Setting up the SSL/TLS structure..." );
if ( ( ret = mbedtls_ssl_config_defaults( &(custom_config->conf),
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 ) {
NGHTTP2_DBG( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret );
return ret;
}
NGHTTP2_DBG( " ok" );
/* alpn */
if ((ret = mbedtls_ssl_conf_alpn_protocols(&(custom_config->conf), alpn_list)) != 0) {
printf("mbedtls_ssl_conf_alpn_protocols failed ret = %d\r\n", ret);
return ret;
}
/* OPTIONAL is not optimal for security,
* but makes interop easier in this simplified example */
mbedtls_ssl_conf_authmode( &(custom_config->conf), custom_config->common_settings.authmode );
mbedtls_ssl_conf_ca_chain( &(custom_config->conf), &(custom_config->verify_source.cacertl), custom_config->verify_source.ca_crl );
mbedtls_ssl_conf_rng( &(custom_config->conf), custom_config->common_settings.f_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &(custom_config->conf), custom_config->common_settings.f_debug, NULL );
mbedtls_ssl_conf_cert_profile( &(custom_config->conf), &mbedtls_x509_crt_profile_myclient);
mbedtls_ssl_conf_ciphersuites(&(custom_config->conf), (const int *)&nghttp2_ciphersuite);
if ( ( ret = mbedtls_ssl_setup( pssl, &(custom_config->conf) ) ) != 0 ) {
NGHTTP2_DBG( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret );
return ret;
}
/*
* set host name, related with SNI
*/
if ( ( ret = mbedtls_ssl_set_hostname(pssl, server_addr->host) ) != 0 ) {
printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret );
return ret;
}
mbedtls_ssl_set_bio( pssl, psocket, custom_config->common_settings.f_send, custom_config->common_settings.f_recv, mbedtls_net_recv_timeout );
mbedtls_ssl_conf_read_timeout(&(custom_config->conf), 10000);
mbedtls_ssl_conf_min_version(&(custom_config->conf), MBEDTLS_SSL_MAJOR_VERSION_3, MBEDTLS_SSL_MINOR_VERSION_3);
/*
* 4. Handshake
*/
NGHTTP2_DBG(". Performing the SSL/TLS handshake...");
while ((ret = mbedtls_ssl_handshake(pssl)) != 0) {
if ((ret != MBEDTLS_ERR_SSL_WANT_READ) && (ret != MBEDTLS_ERR_SSL_WANT_WRITE)) {
NGHTTP2_DBG( " failed ! mbedtls_ssl_handshake returned -0x%04x", -ret);
return ret;
}
}
{
/*
you can check if alpn_str is "h2", if not, should fallback to http/1.
*/
const char *alpn_str = mbedtls_ssl_get_alpn_protocol(pssl);
NGHTTP2_DBG("[ application layer protocol chosen is %s ]", alpn_str ? alpn_str : "(none)");
if (alpn_str == NULL) {
ret = NOT_SUPPORT_H2; //you can define an value you know
return ret;
}
}
NGHTTP2_DBG( " ok" );
/*
* 5. Verify the server certificate
*/
NGHTTP2_DBG(" Verifying peer X.509 certificate...");
http2_verify_source_t *verify_source = &custom_config->verify_source;
if ((NULL != verify_source->f_confirm)
&& (0 != (ret = verify_source->f_confirm(mbedtls_ssl_get_verify_result(pssl))))) {
NGHTTP2_DBG(" failed ! verify result not confirmed.");
return ret;
}
return 0;
}
int main(void)
{
struct addrinfo hints;
struct addrinfo *ai;
struct sockaddr_in server;
int sock;
int res;
char server_name[] = "www.eff.org";
char http_get[200] =
"GET /index.html HTTP/1.1\r\n"
"Host: www.eff.org\r\n"
"\r\n";
char http_get_resp[200];
int cipher_list[] = { MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA, 0};
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt cacert;
printf("Press any key to continue...");
getchar();
printf("\n");
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
mbedtls_x509_crt_init( &cacert );
res = mbedtls_ssl_config_defaults(
&conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if( res != 0 )
{
mbedtls_printerr(res, "mbedtls_ssl_config_defaults");
return 1;
}
#if 0
mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_NONE);
#endif
mbedtls_ssl_conf_ciphersuites( &conf, cipher_list);
#if 0
res = mbedtls_ssl_conf_max_frag_len( &conf, MBEDTLS_SSL_MAX_FRAG_LEN_512);
if( res != 0 )
{
mbedtls_printerr(res, "mbedtls_ssl_conf_max_frag_len");
return 1;
}
#endif
mbedtls_ssl_conf_rng(&conf, wrap_rng, NULL);
res = mbedtls_ssl_setup( &ssl, &conf);
if( res != 0 )
{
mbedtls_printerr(res, "mbedtls_ssl_setup");
return 1;
}
res = mbedtls_x509_crt_parse(&cacert, digicert_der, digicert_der_len);
if( res != 0 )
{
mbedtls_printerr(res, "mbedtls_x509_crt_parse");
return 1;
}
mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
res = mbedtls_ssl_set_hostname( &ssl, server_name);
if( res != 0 )
{
mbedtls_printerr(res, "mbedtls_ssl_set_hostname");
return 1;
}
hints.ai_flags = 0;
hints.ai_family = AF_INET;
hints.ai_socktype = SOCK_STREAM;
hints.ai_protocol = 0;
res = getaddrinfo(server_name, NULL, &hints, &ai);
if (res != 0)
{
if (res == EAI_SYSTEM)
{
perror("getaddrinfo");
}
else
{
fprintf(stderr, "error: getaddrinfo: %d\n", res);
}
return 1;
}
if (ai == NULL)
{
fprintf(stderr, "error: getaddrinfo : output is NULL\n");
return 1;
}
sock = socket(AF_INET , SOCK_STREAM , 0);
if (sock == -1)
{
perror("socket creation failed");
return 1;
}
#if 1
server = *((const struct sockaddr_in *)ai->ai_addr);
server.sin_port = htons( 443 ); /* HTTPS */
#else
/*
* nslookup www.eff.org -> 69.50.225.155
* socat TCP-LISTEN:44333 TCP:69.50.225.155:443
*/
server.sin_family = AF_INET;
server.sin_port = htons(44333);
server.sin_addr.s_addr = inet_addr("192.168.1.173"); /* my PC */
#endif
freeaddrinfo(ai);
if (connect(sock , (struct sockaddr *)&server , sizeof(server)) < 0)
{
perror("connect failed");
close(sock);
return 1;
}
/* TLS connect */
mbedtls_ssl_set_bio( &ssl, &sock, wrap_send, wrap_recv, NULL);
res = mbedtls_ssl_handshake( &ssl );
do
{
const mbedtls_x509_crt *peer_cert;
peer_cert = mbedtls_ssl_get_peer_cert(&ssl);
if (peer_cert == NULL)
{
fprintf(stderr, "no peer cert.\n");
}
else
{
int n;
char info_str[200];
n = mbedtls_x509_crt_info(info_str, sizeof(info_str), "", peer_cert);
fputs("Certificate:\n", stderr);
fputs(info_str, stderr);
fputs("\n", stderr);
}
} while(0);
if (res != 0)
{
mbedtls_printerr(res, "mbedtls_ssl_handshake");
close(sock);
return 1;
}
res = mbedtls_ssl_write(&ssl, (unsigned char *)http_get, strlen(http_get));
if (res <= 0)
{
mbedtls_printerr(res, "mbedtls_ssl_write");
close(sock);
return 1;
}
do
{
res = mbedtls_ssl_read(&ssl, (unsigned char *)http_get_resp, sizeof(http_get_resp));
if (res <= 0)
{
mbedtls_printerr(res, "mbedtls_ssl_read");
close(sock);
return 1;
}
fwrite(http_get_resp, res, 1, stdout);
} while(res == sizeof(http_get_resp)); //TODO: cleaner
/* TLS disconnect */
mbedtls_ssl_free(&ssl);
mbedtls_ssl_config_free(&conf);
close(sock);
return 0;
}
int main( int argc, char *argv[] )
{
int ret, len;
mbedtls_net_context server_fd;
uint32_t flags;
unsigned char buf[1024];
const char *pers = "dtls_client";
int retry_left = MAX_RETRY;
mbedtls_entropy_context entropy;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_x509_crt cacert;
mbedtls_timing_delay_context timer;
((void) argc);
((void) argv);
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold( DEBUG_LEVEL );
#endif
/*
* 0. Initialize the RNG and the session data
*/
mbedtls_net_init( &server_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
mbedtls_x509_crt_init( &cacert );
mbedtls_ctr_drbg_init( &ctr_drbg );
mbedtls_printf( "\n . Seeding the random number generator..." );
fflush( stdout );
mbedtls_entropy_init( &entropy );
if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy,
(const unsigned char *) pers,
strlen( pers ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ctr_drbg_seed returned 0x%04x\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_DATAGRAM,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned 0x%04x\n\n", ret );
goto exit;
}
mbedtls_ssl_conf_ciphersuites(&conf, allowed_ciphersuites);
mbedtls_printf( " ok\n" );
/*
* 0. Load certificates
*/
mbedtls_printf( " . Loading the CA root certificate ..." );
fflush( stdout );
//ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas_pem, mbedtls_test_cas_pem_len);
if( ret < 0 ) {
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n", -ret );
goto exit;
}
ret = mbedtls_ssl_conf_psk(&conf, (const unsigned char*)"AAAAAAAAAAAAAAAA", 16, (const unsigned char*)"32323232-3232-3232-3232-323232323232", 36);
if( ret < 0 ) {
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_psk() returned -0x%x\n\n", -ret );
goto exit;
}
mbedtls_printf( " ok (%d skipped)\n", ret );
/*
* 1. Start the connection
*/
mbedtls_printf( " . Connecting to udp/%s/%s...", SERVER_NAME, SERVER_PORT );
fflush( stdout );
if( ( ret = mbedtls_net_connect( &server_fd, SERVER_ADDR,
SERVER_PORT, MBEDTLS_NET_PROTO_UDP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned 0x%04x\n\n", ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 2. Setup stuff
*/
mbedtls_printf( " . Setting up the DTLS structure..." );
fflush( stdout );
/* OPTIONAL is usually a bad choice for security, but makes interop easier
* in this simplified example, in which the ca chain is hardcoded.
* Production code should set a proper ca chain and use REQUIRED. */
mbedtls_ssl_conf_authmode( &conf, MBEDTLS_SSL_VERIFY_OPTIONAL );
//mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned 0x%04x\n\n", ret );
goto exit;
}
if( ( ret = mbedtls_ssl_set_hostname( &ssl, SERVER_NAME ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned 0x%04x\n\n", ret );
goto exit;
}
mbedtls_ssl_set_bio( &ssl, &server_fd,
mbedtls_net_send, mbedtls_net_recv, mbedtls_net_recv_timeout );
mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay,
mbedtls_timing_get_delay );
mbedtls_printf( " ok\n" );
/*
* 4. Handshake
*/
mbedtls_printf( " . Performing the SSL/TLS handshake..." );
fflush( stdout );
do ret = mbedtls_ssl_handshake( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", -ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 5. Verify the server certificate
*/
mbedtls_printf( " . Verifying peer X.509 certificate..." );
/* In real life, we would have used MBEDTLS_SSL_VERIFY_REQUIRED so that the
* handshake would not succeed if the peer's cert is bad. Even if we used
* MBEDTLS_SSL_VERIFY_OPTIONAL, we would bail out here if ret != 0 */
if( ( flags = mbedtls_ssl_get_verify_result( &ssl ) ) != 0 )
{
char vrfy_buf[512];
mbedtls_printf( " failed\n" );
mbedtls_x509_crt_verify_info( vrfy_buf, sizeof( vrfy_buf ), " ! ", flags );
mbedtls_printf( "%s\n", vrfy_buf );
}
else
mbedtls_printf( " ok\n" );
/*
* 6. Write the echo request
*/
send_request:
mbedtls_printf( " > Write to server:" );
fflush( stdout );
len = sizeof( MESSAGE ) - 1;
do ret = mbedtls_ssl_write( &ssl, (unsigned char *) MESSAGE, len );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned 0x%04x\n\n", ret );
goto exit;
}
len = ret;
mbedtls_printf( " %d bytes written\n\n%s\n\n", len, MESSAGE );
/*
* 7. Read the echo response
*/
mbedtls_printf( " < Read from server:" );
fflush( stdout );
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
do ret = mbedtls_ssl_read( &ssl, buf, len );
while( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE );
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_TIMEOUT:
mbedtls_printf( " timeout\n\n" );
if( retry_left-- > 0 )
goto send_request;
goto exit;
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
ret = 0;
goto close_notify;
default:
mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n\n", -ret );
goto exit;
}
}
len = ret;
mbedtls_printf( " %d bytes read\n\n%s\n\n", len, buf );
/*
* 8. Done, cleanly close the connection
*/
close_notify:
mbedtls_printf( " . Closing the connection..." );
/* No error checking, the connection might be closed already */
do ret = mbedtls_ssl_close_notify( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
ret = 0;
mbedtls_printf( " done\n" );
/*
* 9. Final clean-ups and exit
*/
exit:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
mbedtls_printf( "Last error was: 0x%04x - %s\n\n", ret, error_buf );
}
#endif
mbedtls_net_free( &server_fd );
mbedtls_x509_crt_free( &cacert );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
mbedtls_ctr_drbg_free( &ctr_drbg );
mbedtls_entropy_free( &entropy );
#if defined(_WIN32)
mbedtls_printf( " + Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
#endif
/* Shell can not handle large exit numbers -> 1 for errors */
if( ret < 0 )
ret = 1;
return( ret );
}
