static int __init mcde_subsystem_init(void)
{
int ret;
pr_info("MCDE subsystem init begin\n");
/* MCDE module init sequence */
ret = mcde_init();
if (ret)
goto mcde_failed;
ret = mcde_display_init();
if (ret)
goto mcde_display_failed;
ret = mcde_dss_init();
if (ret)
goto mcde_dss_failed;
#ifdef CONFIG_FB_MCDE
ret = mcde_fb_init();
if (ret)
goto mcde_fb_failed;
#endif
pr_info("MCDE subsystem init done\n");
goto done;
#ifdef CONFIG_FB_MCDE
mcde_fb_failed:
mcde_dss_exit();
#endif
mcde_dss_failed:
mcde_display_exit();
mcde_display_failed:
mcde_exit();
mcde_failed:
done:
return ret;
}
int mcde_splash_image(void)
{
int ret = -ENODEV;
struct mcde_rectangle rect;
debug("%s: enter\n", __func__);
if (main_display.port->type == MCDE_PORTTYPE_DSI)
ret = mcde_startup_dsi(&platform_data);
else if (main_display.port->type == MCDE_PORTTYPE_DPI)
ret = mcde_startup_dpi(&platform_data);
if (ret != 0) {
printf("%s: mcde_startup... -> %d\n", __func__, ret);
return ret;
}
/* dss enable display */
chnl = mcde_chnl_get(main_display.chnl_id, main_display.fifo,
main_display.port);
if (IS_ERR(chnl)) {
ret = PTR_ERR(chnl);
printf("%s: Failed to acquire MCDE channel ret=%d\n",
__func__, ret);
goto get_chnl_failed;
}
ret = mcde_chnl_set_power_mode(chnl, MCDE_DISPLAY_PM_STANDBY);
if (ret) {
printf("%s: mcde_chnl_set_power_mode() -> %d\n",
__func__, ret);
goto get_chnl_failed;
}
/* dss set video mode */
ret = mcde_chnl_set_video_mode(chnl, &video_mode);
if (ret < 0) {
printf("%s:Failed to set video mode on channel ret=%d\n",
__func__, ret);
goto set_video_mode_failed;
}
mcde_chnl_set_pixel_format(chnl, main_display.port_pixel_format);
mcde_chnl_set_update_area(chnl, 0, 0, main_display.native_x_res,
main_display.native_y_res);
mcde_chnl_apply(chnl);
/* chnl setup ok, display image */
ret = mcde_display_image(chnl);
if (ret != 0) {
debug("%s: mcde_display_image() -> %d\n",
__func__, ret);
goto display_image_failed;
}
#if defined(BOARD_C7_P0)
/* vdd power on */
db8500_gpio_set_output(GPIO167_GPIO, 1);
udelay(400);
/* stbyb pull high */
db8500_gpio_set_output(GPIO154_GPIO, 1);
udelay(400);
/* reset pull high */
db8500_gpio_set_output(GPIO139_GPIO, 1);
mdelay(20);
db8500_gpio_set_output(GPIO156_GPIO, 1);
mdelay(20);
db8500_gpio_set_output(GPIO168_GPIO, 1);
mdelay(20);
db8500_gpio_set_output(GPIO218_GPIO, 1);
mdelay(20);
db8500_gpio_set_output(GPIO157_GPIO, 1);
mdelay(20);
#endif
#ifdef CONFIG_VIA_DISPLAY_DSI
ret = mcde_turn_on_display();
if (ret) {
printf("%s: mcde_turn_on_display() -> %d\n", __func__, ret);
goto get_chnl_failed;
}
#endif
#if defined(BOARD_C7_P0)
/* avdd vcom vgl vgh is on */
db8500_gpio_set_output(GPIO153_GPIO, 1);
mdelay(40);
db8500_gpio_set_output(GPIO139_GPIO, 0);
mdelay(1);
db8500_gpio_set_output(GPIO139_GPIO, 1);
#endif
mcde_chnl_apply(chnl);
rect.x = 0;
rect.y = 0;
rect.w = main_display.native_x_res;
rect.h = main_display.native_y_res;
mcde_chnl_update(chnl, &rect);
#ifndef CONFIG_VIA_DISPLAY_DSI
ret = mcde_turn_on_display();
if (ret) {
printf("%s: mcde_turn_on_display() -> %d\n", __func__, ret);
goto get_chnl_failed;
}
#endif
ret = mcde_chnl_set_power_mode(chnl, MCDE_DISPLAY_PM_ON);
if (ret) {
printf("%s: mcde_chnl_set_power_mode() -> %d\n", __func__, ret);
goto get_chnl_failed;
}
mdelay(50);
db8500_gpio_set_output(GPIO68_GPIO, 1);
return ret;
get_chnl_failed:
display_image_failed:
set_video_mode_failed:
mcde_exit();
return ret;
}
static void __exit mcde_module_exit(void)
{
mcde_exit();
mcde_display_exit();
mcde_dss_exit();
}