/*
* check_dsi_ctrl_status() - Reads MFD structure and
* calls platform specific DSI ctrl Status function.
* @work : dsi controller status data
*/
static void check_dsi_ctrl_status(struct work_struct *work)
{
struct dsi_status_data *pdsi_status = NULL;
pdsi_status = container_of(to_delayed_work(work),
struct dsi_status_data, check_status);
if (!pdsi_status) {
pr_err("%s: DSI status data not available\n", __func__);
return;
}
if (!pdsi_status->mfd) {
pr_err("%s: FB data not available\n", __func__);
return;
}
if (mdss_panel_is_power_off(pdsi_status->mfd->panel_power_state) ||
pdsi_status->mfd->shutdown_pending) {
pr_err("%s: panel off\n", __func__);
return;
}
pdsi_status->mfd->mdp.check_dsi_status(work, interval);
}
void mdss_check_dsi_ctrl_status(struct work_struct *work, uint32_t interval)
{
struct dsi_status_data *pstatus_data = NULL;
struct mdss_panel_data *pdata = NULL;
struct mipi_panel_info *mipi = NULL;
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
struct mdss_overlay_private *mdp5_data = NULL;
struct mdss_mdp_ctl *ctl = NULL;
int ret = 0;
pstatus_data = container_of(to_delayed_work(work),
struct dsi_status_data, check_status);
if (!pstatus_data || !(pstatus_data->mfd)) {
pr_err("%s: mfd not available\n", __func__);
return;
}
pdata = dev_get_platdata(&pstatus_data->mfd->pdev->dev);
if (!pdata) {
pr_err("%s: Panel data not available\n", __func__);
return;
}
mipi = &pdata->panel_info.mipi;
ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata,
panel_data);
if (!ctrl_pdata || (!ctrl_pdata->check_status &&
(ctrl_pdata->status_mode != ESD_TE))) {
pr_err("%s: DSI ctrl or status_check callback not available\n",
__func__);
return;
}
mdp5_data = mfd_to_mdp5_data(pstatus_data->mfd);
ctl = mfd_to_ctl(pstatus_data->mfd);
if (!ctl) {
pr_err("%s: Display is off\n", __func__);
return;
}
if (ctl->power_state == MDSS_PANEL_POWER_OFF) {
schedule_delayed_work(&pstatus_data->check_status,
msecs_to_jiffies(interval));
pr_debug("%s: ctl not powered on\n", __func__);
return;
}
if (ctrl_pdata->status_mode == ESD_TE) {
mdss_check_te_status(ctrl_pdata, pstatus_data, interval);
return;
}
mutex_lock(&ctl->offlock);
if (mipi->mode == DSI_CMD_MODE)
mutex_lock(&mdp5_data->ov_lock);
if (mdss_panel_is_power_off(pstatus_data->mfd->panel_power_state) ||
pstatus_data->mfd->shutdown_pending) {
if (mipi->mode == DSI_CMD_MODE)
mutex_unlock(&mdp5_data->ov_lock);
mutex_unlock(&ctl->offlock);
pr_err("%s: DSI turning off, avoiding panel status check\n",
__func__);
return;
}
if (ctl->wait_pingpong)
ctl->wait_pingpong(ctl, NULL);
pr_debug("%s: DSI ctrl wait for ping pong done\n", __func__);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_ON);
ret = ctrl_pdata->check_status(ctrl_pdata);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_OFF);
if (mipi->mode == DSI_CMD_MODE)
mutex_unlock(&mdp5_data->ov_lock);
mutex_unlock(&ctl->offlock);
if ((pstatus_data->mfd->panel_power_state == MDSS_PANEL_POWER_ON)) {
if (ret > 0)
schedule_delayed_work(&pstatus_data->check_status,
msecs_to_jiffies(interval));
else
mdss_report_panel_dead(pstatus_data);
}
}
static void check_dsi_ctrl_status(struct work_struct *work)
{
struct dsi_status_data *pdsi_status = NULL;
struct mdss_panel_data *pdata = NULL;
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
struct mdp3_session_data *mdp3_session = NULL;
int ret = 0;
pdsi_status = container_of(to_delayed_work(work),
struct dsi_status_data, check_status);
if (!pdsi_status || !(pdsi_status->mfd)) {
pr_err("%s: mfd not available\n", __func__);
return;
}
pdata = dev_get_platdata(&pdsi_status->mfd->pdev->dev);
if (!pdata) {
pr_err("%s: Panel data not available\n", __func__);
return;
}
ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata,
panel_data);
if (!ctrl_pdata || !ctrl_pdata->check_status) {
pr_err("%s: DSI ctrl or status_check callback not available\n",
__func__);
return;
}
if (mdss_panel_is_power_off(pdsi_status->mfd->panel_power_state) ||
pdsi_status->mfd->shutdown_pending) {
pr_err("%s: panel off\n", __func__);
return;
}
mdp3_session = pdsi_status->mfd->mdp.private1;
if (!mdp3_session) {
pr_err("%s: Display is off\n", __func__);
return;
}
if (!mdp3_session->status) {
pr_debug("%s: display off already\n", __func__);
return;
}
if (mdp3_session->wait_for_dma_done)
ret = mdp3_session->wait_for_dma_done(mdp3_session);
if (!ret)
ret = ctrl_pdata->check_status(ctrl_pdata);
else
pr_err("%s: wait_for_dma_done error\n", __func__);
if (mdss_fb_is_power_on_interactive(pdsi_status->mfd)) {
if (ret > 0) {
schedule_delayed_work(&pdsi_status->check_status,
msecs_to_jiffies(interval));
} else {
char *envp[2] = {"PANEL_ALIVE=0", NULL};
pdata->panel_info.panel_dead = true;
ret = kobject_uevent_env(
&pdsi_status->mfd->fbi->dev->kobj,
KOBJ_CHANGE, envp);
pr_err("%s: Panel has gone bad, sending uevent - %s\n",
__func__, envp[0]);
}
}
}
/*
* mdss_check_dsi_ctrl_status() - Check MDP5 DSI controller status periodically.
* @work : dsi controller status data
* @interval : duration in milliseconds to schedule work queue
*
* This function calls check_status API on DSI controller to send the BTA
* command. If DSI controller fails to acknowledge the BTA command, it sends
* the PANEL_ALIVE=0 status to HAL layer.
*/
void mdss_check_dsi_ctrl_status(struct work_struct *work, uint32_t interval)
{
struct dsi_status_data *pstatus_data = NULL;
struct mdss_panel_data *pdata = NULL;
struct mipi_panel_info *mipi = NULL;
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
struct mdss_overlay_private *mdp5_data = NULL;
struct mdss_mdp_ctl *ctl = NULL;
int ret = 0;
pstatus_data = container_of(to_delayed_work(work),
struct dsi_status_data, check_status);
if (!pstatus_data || !(pstatus_data->mfd)) {
pr_err("%s: mfd not available\n", __func__);
return;
}
pdata = dev_get_platdata(&pstatus_data->mfd->pdev->dev);
if (!pdata) {
pr_err("%s: Panel data not available\n", __func__);
return;
}
mipi = &pdata->panel_info.mipi;
ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata,
panel_data);
if (!ctrl_pdata || (!ctrl_pdata->check_status &&
(ctrl_pdata->status_mode != ESD_TE))) {
pr_err("%s: DSI ctrl or status_check callback not available\n",
__func__);
return;
}
mdp5_data = mfd_to_mdp5_data(pstatus_data->mfd);
ctl = mfd_to_ctl(pstatus_data->mfd);
if (!ctl) {
pr_err("%s: Display is off\n", __func__);
return;
}
if (ctl->power_state == MDSS_PANEL_POWER_OFF) {
schedule_delayed_work(&pstatus_data->check_status,
msecs_to_jiffies(interval));
pr_debug("%s: ctl not powered on\n", __func__);
return;
}
if (ctrl_pdata->status_mode == ESD_TE) {
mdss_check_te_status(ctrl_pdata, pstatus_data, interval);
return;
}
mutex_lock(&ctrl_pdata->mutex);
/*
* TODO: Because mdss_dsi_cmd_mdp_busy has made sure DMA to
* be idle in mdss_dsi_cmdlist_commit, it is not necessary
* to acquire ov_lock in case of video mode. Removing this
* lock to fix issues so that ESD thread would not block other
* overlay operations. Need refine this lock for command mode
*/
if (mipi->mode == DSI_CMD_MODE)
mutex_lock(&mdp5_data->ov_lock);
if (mdss_panel_is_power_off(pstatus_data->mfd->panel_power_state)) {
if (mipi->mode == DSI_CMD_MODE)
mutex_unlock(&mdp5_data->ov_lock);
mutex_unlock(&ctrl_pdata->mutex);
pr_err("%s: DSI turning off, avoiding panel status check\n",
__func__);
return;
}
/*
* For the command mode panels, we return pan display
* IOCTL on vsync interrupt. So, after vsync interrupt comes
* and when DMA_P is in progress, if the panel stops responding
* and if we trigger BTA before DMA_P finishes, then the DSI
* FIFO will not be cleared since the DSI data bus control
* doesn't come back to the host after BTA. This may cause the
* display reset not to be proper. Hence, wait for DMA_P done
* for command mode panels before triggering BTA.
*/
if (ctl->wait_pingpong)
ctl->wait_pingpong(ctl, NULL);
pr_debug("%s: DSI ctrl wait for ping pong done\n", __func__);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_ON);
ret = ctrl_pdata->check_status(ctrl_pdata);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_OFF);
if (mipi->mode == DSI_CMD_MODE)
mutex_unlock(&mdp5_data->ov_lock);
mutex_unlock(&ctrl_pdata->mutex);
if ((pstatus_data->mfd->panel_power_state == MDSS_PANEL_POWER_ON)) {
if (ret > 0)
schedule_delayed_work(&pstatus_data->check_status,
msecs_to_jiffies(interval));
else
mdss_report_panel_dead(pstatus_data);
}
}
/*
* mdss_check_dsi_ctrl_status() - Check MDP5 DSI controller status periodically.
* @work : dsi controller status data
* @interval : duration in milliseconds to schedule work queue
*
* This function calls check_status API on DSI controller to send the BTA
* command. If DSI controller fails to acknowledge the BTA command, it sends
* the PANEL_ALIVE=0 status to HAL layer.
*/
void mdss_check_dsi_ctrl_status(struct work_struct *work, uint32_t interval)
{
struct dsi_status_data *pstatus_data = NULL;
struct mdss_panel_data *pdata = NULL;
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
struct mdss_overlay_private *mdp5_data = NULL;
struct mdss_mdp_ctl *ctl = NULL;
int ret = 0;
pstatus_data = container_of(to_delayed_work(work),
struct dsi_status_data, check_status);
if (!pstatus_data || !(pstatus_data->mfd)) {
pr_err("%s: mfd not available\n", __func__);
return;
}
pdata = dev_get_platdata(&pstatus_data->mfd->pdev->dev);
if (!pdata) {
pr_err("%s: Panel data not available\n", __func__);
return;
}
ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata,
panel_data);
if (!ctrl_pdata || !ctrl_pdata->check_status) {
pr_err("%s: DSI ctrl or status_check callback not available\n",
__func__);
return;
}
mdp5_data = mfd_to_mdp5_data(pstatus_data->mfd);
ctl = mfd_to_ctl(pstatus_data->mfd);
if (!ctl) {
pr_err("%s: Display is off\n", __func__);
return;
}
if (ctl->power_state == MDSS_PANEL_POWER_OFF) {
schedule_delayed_work(&pstatus_data->check_status,
msecs_to_jiffies(interval));
pr_err("%s: ctl not powered on\n", __func__);
return;
}
mutex_lock(&ctrl_pdata->mutex);
if (ctl->shared_lock)
mutex_lock(ctl->shared_lock);
mutex_lock(&mdp5_data->ov_lock);
if (mdss_panel_is_power_off(pstatus_data->mfd->panel_power_state)) {
mutex_unlock(&mdp5_data->ov_lock);
if (ctl->shared_lock)
mutex_unlock(ctl->shared_lock);
mutex_unlock(&ctrl_pdata->mutex);
pr_err("%s: DSI turning off, avoiding panel status check\n",
__func__);
return;
}
/*
* For the command mode panels, we return pan display
* IOCTL on vsync interrupt. So, after vsync interrupt comes
* and when DMA_P is in progress, if the panel stops responding
* and if we trigger BTA before DMA_P finishes, then the DSI
* FIFO will not be cleared since the DSI data bus control
* doesn't come back to the host after BTA. This may cause the
* display reset not to be proper. Hence, wait for DMA_P done
* for command mode panels before triggering BTA.
*/
if (ctl->wait_pingpong)
ctl->wait_pingpong(ctl, NULL);
pr_debug("%s: DSI ctrl wait for ping pong done\n", __func__);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_ON);
ret = ctrl_pdata->check_status(ctrl_pdata);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_OFF);
mutex_unlock(&mdp5_data->ov_lock);
if (ctl->shared_lock)
mutex_unlock(ctl->shared_lock);
mutex_unlock(&ctrl_pdata->mutex);
if ((pstatus_data->mfd->panel_power_state == MDSS_PANEL_POWER_ON)) {
if (ret > 0) {
schedule_delayed_work(&pstatus_data->check_status,
msecs_to_jiffies(interval));
} else {
char *envp[2] = {"PANEL_ALIVE=0", NULL};
pdata->panel_info.panel_dead = true;
ret = kobject_uevent_env(
&pstatus_data->mfd->fbi->dev->kobj,
KOBJ_CHANGE, envp);
pr_err("%s: Panel has gone bad, sending uevent - %s\n",
__func__, envp[0]);
}
}
}
